Now that we have a separate ARM_FEATURE_V8_PMULL bit, use it for
the A64 PMULL, not the AES feature bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for the VMULL.P64 polynomial 64x64 to 128 bit multiplication
instruction in the A32/T32 instruction sets; this is part of the v8
Crypto Extensions.
To do this we have to move the neon_pmull_64_{lo,hi} helpers from
helper-a64.c into neon_helper.c so they can be used by the AArch32
translator.
Inspired-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-4-git-send-email-peter.maydell@linaro.org
This adds support for the SHA1 and SHA256 instructions that are available
on some v8 implementations of Aarch32.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1401386724-26529-2-git-send-email-peter.maydell@linaro.org
[PMM:
* rebase
* fix bad indent
* add a missing UNDEF check for Q!=1 in the 3-reg SHA1/SHA256 case
* use g_assert_not_reached()
* don't re-extract bit 6 for the 2-reg-misc encodings
* set the ELF HWCAP2 bits for the new features
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/softmmu-smap: (33 commits)
target-i386: cleanup x86_cpu_get_phys_page_debug
target-i386: fix protection bits in the TLB for SMEP
target-i386: support long addresses for 4MB pages (PSE-36)
target-i386: raise page fault for reserved bits in large pages
target-i386: unify reserved bits and NX bit check
target-i386: simplify pte/vaddr calculation
target-i386: raise page fault for reserved physical address bits
target-i386: test reserved PS bit on PML4Es
target-i386: set correct error code for reserved bit access
target-i386: introduce support for 1 GB pages
target-i386: introduce do_check_protect label
target-i386: tweak handling of PG_NX_MASK
target-i386: commonize checks for PAE and non-PAE
target-i386: commonize checks for 4MB and 4KB pages
target-i386: commonize checks for 2MB and 4KB pages
target-i386: fix coding standards in x86_cpu_handle_mmu_fault
target-i386: simplify SMAP handling in MMU_KSMAP_IDX
target-i386: fix kernel accesses with SMAP and CPL = 3
target-i386: move check_io helpers to seg_helper.c
target-i386: rename KSMAP to KNOSMAP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With the next patch, these need to be correct or VM86 tasks
have the wrong CPL. The flags are basically what the Intel VMX
documentation say is mandatory for entry into a VM86 guest.
For consistency, SMM ought to have the same flags except with
CPL=0.
Tested-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Instead of manually calling cpu_x86_set_cpl() when the CPL changes,
check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS). Every
location that called cpu_x86_set_cpl() also called
cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer
required.
This fixes the SMM handler code as it was not setting/restoring the
CPL level manually.
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Implementations of system calls getrusage and wait4 have not previously
handled correctly cases when incorrect address of struct rusage is
passed.
This change makes sure return values are correctly set for these cases.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ARM kernel has chosen to spill into the HWCAP2 ELF feature bit flags
early, even though it hasn't yet exhausted all 32 bits of the HWCAP word.
Add support for setting this in the same way we do for HWCAP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ARM target-specific code in elfload.c was incorrectly allowing
the 64-bit ARM target to use most of the existing 32-bit definitions:
most noticably this meant that our HWCAP bits passed to the guest
were wrong, and register handling when dumping core was totally
broken. Fix this by properly separating the 64 and 32 bit code,
since they have more differences than similarities.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The kernel has added support for a number of new ARM HWCAP bits;
add them to QEMU, including support for setting them where we have
a corresponding CPU feature bit.
We were also incorrectly setting the VFPv3D16 HWCAP -- this means
"only 16 D registers", not "supports 16-bit floating point format";
since QEMU always has 32 D registers for VFPv3, we can just remove
the line that incorrectly set this bit.
The kernel does not set the HWCAP_FPA even if it is providing FPA
emulation via nwfpe, so don't set this bit in QEMU either.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The ELF HWCAP bits for ARM features THUMBEE, NEON, VFPv3 and VFPv3D16 are
all off by one compared to the kernel definitions. Fix this discrepancy
and add in the missing CRUNCH bit which was the cause of the off-by-one
error. (We don't emulate any of the CPUs which have that weird hardware,
so it's otherwise uninteresting to us.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
--enable-uname-release was a rather heavyweight hammer, as it allows
providing values less that UNAME_MINIMUM_RELEASE. Also, it affects
all built linux-user targets, which in most cases is not what user
wants.
Now that we have UNAME_MINIMUM_RELEASE for all linux-user platforms,
we can drop --enable-uname-release and the related CONFIG_UNAME_RELEASE
define.
Users can still override the variable with QEMU_UNAME=2.6.32 or -r
command line option. If distributors need to update a minimum version
for a specific target, it can be done by updating UNAME_MINIMUM_RELEASE.
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Set the fault address correctly in the signal information passed
to a signal handler for AArch64 guests.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use the public sigset_t instead of the glibc specific internal
__sigset_t in _syscall.
Calculate the sigevent pad size is calculated in similar way as kernel
does it instead of using glibc internal field _pad.
This is needed for building with musl libc.
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Recently merged kernel ports (such as OpenRISC and Meta) have an llseek
system call instead of _llseek. This is handled for the host
architecture by defining __NR__llseek as __NR_llseek, but not for the
target architecture.
Handle it in the same way for these architectures, defining
TARGET_NR__llseek as TARGET_NR_llseek.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jia Liu <proljc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Assert that the amount of stack space used for auxvec, envp & argv
exactly matches the amount allocated. This catches if DLINFO_ITEMS isn't
updated when another NEW_AUX_ENT is added.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU already supports /proc/self/{maps,stat,auxv} so addition of
/proc/self/exe is rather trivial.
Fixes https://bugs.launchpad.net/qemu/+bug/1299190
Signed-off-by: Maxim Ostapenko <m.ostapenko@partner.samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For AArch32 exceptions, the only information provided about
the cause of an exception is the individual exception type (data
abort, undef, etc), which we store in cs->exception_index. For
AArch64, the CPU provides much more detail about the cause of
the exception, which can be found in the syndrome register.
Create a set of fields in CPUARMState which must be filled in
whenever an exception is raised, so that exception entry can
correctly fill in the syndrome register for the guest.
This includes the information which in AArch32 appears in
the DFAR and IFAR (fault address registers) and the DFSR
and IFSR (fault status registers) for data aborts and
prefetch aborts, since if we end up taking the MMU fault
to AArch64 rather than AArch32 this will need to end up
in different system registers.
This patch does a refactoring which moves the setting of the
AArch32 DFAR/DFSR/IFAR/IFSR from the point where the exception
is raised to the point where it is taken. (This is no change
for cores with an MMU, retains the existing clearly incorrect
behaviour for ARM946 of trashing the MP access permissions
registers which share the c5_data and c5_insn state fields,
and has no effect for v7M because we don't implement its
MPU fault status or address registers.)
As a side effect of the cleanup we fix a bug in the AArch64
linux-user mode code where we were passing a 64 bit fault
address through the 32 bit c6_data/c6_insn fields: it now
goes via the always-64-bit exception.vaddress.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Flags NONBLOCK and CLOEXEC can have different values on the host and the
guest, so set correct host values before calling accept4().
This fixes several issues with accept4 system call and user-mode of QEMU.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Commit a07c67dfcc (Implement AT_CLKTCK.) back in March 2008 added a
new auxvec entry but didn't increment DLINFO_ITEMS, so it's been out of
sync ever since.
Bump it up to 14 so that it matches the number of NEW_AUX_ENT's that
need to be counted in create_elf_tables().
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Paul Brook <paul@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Implement the capget and capset syscalls. This is useful because
simple programs like 'ls' try to use it in AArch64, and otherwise
we emit a lot of noise about it being unimplemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Don't allow the linux-user guest to block SIGSEGV -- QEMU needs this
signal to detect accesses to pages which it has marked read-only
because it has cached translated code from them.
We implement this by making the do_sigprocmask() wrapper suppress
SIGSEGV when doing the host process signal mask manipulation; instead
we store the current state of SIGSEGV in the TaskState struct.
If we get a SIGSEGV for the guest when the guest has blocked the
signal, we treat it as if the default SEGV handler was in place,
as the kernel does for forced SIGSEGV delivery.
This patch is based on an idea by Alex Barcelo, but rather than
simply lying to the guest about the SIGSEGV state we track it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reported-by: Alex Barcelo <abarcelo@ac.upc.edu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Create a wrapper for signal mask changes initiated by the guest;
(this includes syscalls and also the sigreturns from signal.c)
this will give us a place to put code which prevents the guest
from changing the handling of signals used by QEMU itself
internally.
The wrapper is called from all the guest-initiated sigprocmask, but
is not called from internal qemu sigprocmask calls.
Signed-off-by: Alex Barcelo <abarcelo@ac.upc.edu>
[PMM: Added calls to wrapper for sigprocmask uses in signal.c
when setting the signal mask on entry and exit from signal
handlers, since these also are guest-provided signal masks.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
AArch64 Linux, unlike AArch32, doesn't use a commpage. This means we
should not be reserving room in the guest address space for one.
Fixes LP:1287195.
Reported-by: Amanieu d'Antras <amanieu@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
F_GETOWN is replaced by F_GETOWN_EX inside the glibc fcntl wrapper
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU's implementation of the m68k atomic_barrier syscall, like the kernel's,
is just a no-op. However we still need to return a result code from it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The error path in AArch64 do_rt_sigreturn() which fails before
attempting lock_user_struct() was doing an unlock_user_struct()
on an uninitialized variable. Initialize frame to NULL so we
can use the same error-exit path in all cases (unlock of NULL
is permitted and does nothing).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
* remotes/riku/linux-user-for-upstream:
linux-user: set minimum kernel version to 2.6.32
linux-user: correct handling of break exception for MIPS
linux-user: translate signal number on return from sigtimedwait
linux-user: Implement sendmmsg syscall
linux-user: Fix getresuid, getresgid if !USE_UID16
linux-user: Don't use UID16 on AArch64
linux-user: AArch64: Implement SA_RESTORER for signal handlers
linux-user/signal.c: Fix AArch64 big-endian FP register restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Popular glibc based distributions[1] require minimum
2.6.32 as kernel version. For some targets 2.6.18
would be enough, but dropping so low would mean some
suboptimal system calls could get used.
Set the minimum kernel advertized to 2.6.32 for
all architectures but aarch64 to ensure working qemu
linux-user in case host kernel is older.
[1] https://bugs.launchpad.net/ubuntu/+source/eglibc/+bug/921078
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch adds the Store Quadword Conditionl (stqcx.) instruction
which is introduced in Power ISA 2.07.
Signed-off-by: Tom Musta <tommusta@gmail.com>
[agraf: fix compile error when !TARGET_PPC64]
Signed-off-by: Alexander Graf <agraf@suse.de>
Exception with break instruction has not been correctly propagated as
SIGTRAP. This resolves crash issues with examples that use break
instruction on MIPS.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
On success, sigtimedwait() returns a signal number that needs to be
translated from a host value to a target value.
This change also fixes issues with sigwait (that is implemented using
sigtimedwait()).
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Glibc when built for newer kernels assumes that the sendmmsg syscall is
available. Without it, dns resolution simply fails to work.
Wrap the syscall with existing infrastructure so that we don't have a host
dependency on sendmmsg.
To avoid locking the same area of guest memory twice (which will break if
DEBUG_REMAP is defined) we pull the lock/unlock part of do_sendrecvmsg()
out into its own function so the actual implementation can be shared.
Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: add recvmmsg support;
handle errors (which also implies support for non-blocking operations);
cap the vector length as the kernel implementation does;
don't lock guest memory twice;
support MSG_WAITFORONE flag]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The size of the UID/GID types depends on whether USE_UID16 is
defined. Define a new put_user_id() which writes a uid/gid
type to guest memory. This fixes getresuid and getresgid, which
were always storing 16 bits even if the uid type was 32 bits.
Reported-by: Michael Matz <matz@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The AArch64 kernel defines its __kernel_uid_t type as 32 bits, unlike
32 bit ARM, so don't enable our 16-bit UID wrapper handling.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Implement support for signal handlers with the SA_RESTORER
flag set.
Signed-off-by: Michael Matz <matz@suse.de>
[PMM: minor tweaks to make patch apply to current master]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Fix the loop restoring the FP registers from the signal frame to match
the one used when setting up the signal frame, so that it handles
TARGET_WORDS_BIGENDIAN being set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
* Fix a bug causing an assertion in the NVIC on ARMv7M models
* More A64 Neon instructions
* Refactor cpreg API to separate out access check functions, as
groundwork for AArch64 system mode
* Fix bug in linux-user A64 store-exclusive of XZR
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=h/1p
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140220' into staging
target-arm queue:
* Fix a bug causing an assertion in the NVIC on ARMv7M models
* More A64 Neon instructions
* Refactor cpreg API to separate out access check functions, as
groundwork for AArch64 system mode
* Fix bug in linux-user A64 store-exclusive of XZR
# gpg: Signature made Thu 20 Feb 2014 11:12:57 GMT using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140220: (30 commits)
linux-user: AArch64: Fix exclusive store of the zero register
target-arm: A64: Implement unprivileged load/store
target-arm: A64: Implement narrowing three-reg-diff operations
target-arm: A64: Implement the wide 3-reg-different operations
target-arm: A64: Add most remaining three-reg-diff widening ops
target-arm: A64: Add opcode comments to disas_simd_three_reg_diff
target-arm: A64: Implement store-exclusive for system mode
target-arm: Fix incorrect type for value argument to write_raw_cp_reg
target-arm: Remove failure status return from read/write_raw_cp_reg
target-arm: Remove unnecessary code now read/write fns can't fail
target-arm: Drop success/fail return from cpreg read and write functions
target-arm: Convert miscellaneous reginfo structs to accessfn
target-arm: Convert generic timer reginfo to accessfn
target-arm: Convert performance monitor reginfo to accessfn
target-arm: Split cpreg access checks out from read/write functions
target-arm: Stop underdecoding ARM946 PRBS registers
target-arm: Log bad system register accesses with LOG_UNIMP
target-arm: Remove unused ARMCPUState sr substruct
target-arm: Restrict check_ap() use of S and R bits to v6 and earlier
target-arm: Define names for SCTLR bits
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix two issues in error handling in target_to_host_semarray():
* don't leak the host_array buffer if lock_user fails
* return an error if malloc() fails
v2: added missing * -Riku Voipio
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
In lock_iovec() if lock_user() failed we were doing an unlock_user
but not a free(vec), which is the wrong way round. We were also
assuming that free() and unlock_user() don't touch errno, which
is not guaranteed. Fix both these problems.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When forcing a fatal signal, we weren't initialising the sa_flags
field in the struct sigaction we used to reset the signal handler
to SIG_DFL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Avoid calling g_free() on unintialized data in the error-handling
paths in elf_core_dump() by splitting the initialization of the
elf_note_info struct out of fill_note_info() so that it's always
valid to call free_note_info() whether we got to the point of
being able to fill_note_info() or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Refactor do_socketcall() to do argument conversion/checking first,
according to a lookup table (which call has how many args) and
by calling the right function second with ready-to-go arguments.
This ensures that all arguments are handled as abi_long, according
to socketcall prototype, and simplifies argument handling alot too.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
__put_user can write bytes, words (2 bytes) or longwords (4 bytes).
Here obviously words should have been written, but bytes were written,
so values like 0x9c5f were truncated to 0x5f.
Fix this by changing retcode from uint8_t to to uint16_t in
target_signal_frame and also in the unused rt_signal_frame.
This problem was reported by static code analysis (smatch).
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Acked-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
addrlen parameter of recvfrom() of type socklen_t* was read into
variable of type socklen_t, that caused zeroing out of upper 4 bytes
when running s390x on top of x86_64. This patch changes addrlen type
to abi_ulong.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
optlen parameter of getsockopt() of type socklen_t* was read into
variable of type socklen_t, that caused zeroing out of upper 4 bytes
when running s390x on top of x86_64. This patch changes optlen type
to abi_ulong.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
It was broken by 4ce6243dc6,
where TARGET_CLONE_BACKWARDS was specified instead of
TARGET_CLONE_BACKWARDS2.
Signed-off-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The regs parameter is not used anywhere, so remove it.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
* mjt/trivial-patches:
acpi unit-test: Remove temporary disk after test
mainstone: Fix duplicate array values for key 'space'
pxa27x: Add 'const' attribute to keyboard maps
pxa27x: Reduce size of keyboard matrix mapping
doc: Mention chardev:id in available devices for -serial
configure: Python tests must be done before help message
configure: Rewrite code for help message
fix -boot strict regressed in commit 6ef4716
vl: make boot_strict variable static (not used outside vl.c)
x86: only allow real mode to access 32bit without LMA
linux-user: Use macro TARGET_NSIG_WORDS where possible
exynos4210: Use macro ARRAY_SIZE where possible
ui/cocoa: Use macro ARRAY_SIZE where possible
misc: Use macro ARRAY_SIZE where possible
openrisc: Fix spelling in comment (transaltion -> translation)
hw/arm/highbank: Simplify code (memory region in device state)
Message-id: 1388182050-10270-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Use the helpers provided for getting the correct FPSR and FPCR
values for the signal context.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The AArch64 linux-user support was written before but merged after
commit 4ce6243dc6 which cleaned up the handling of the clone()
syscall argument order, so we failed to notice that AArch64 also needs
TARGET_CLONE_BACKWARDS to be defined. Add this define so that clone
and fork syscalls work correctly.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This implement exclusive loads/stores for aarch64 along the lines of
arm32 and ppc implementations. The exclusive load remembers the address
and loaded value. The exclusive store throws an an exception which uses
those values to check for equality in a proper exclusive region.
This is not actually the architecture mandated semantics (for either
AArch32 or AArch64) but it is close enough for typical guest code
sequences to work correctly, and saves us from having to monitor all
guest stores. It's fairly easy to come up with test cases where we
don't behave like hardware - we don't for example model cache line
behaviour. However in the common patterns this works, and the existing
32 bit ARM exclusive access implementation has the same limitations.
AArch64 also implements new acquire/release loads/stores (which may be
either exclusive or non-exclusive). These imposes extra ordering
constraints on memory operations (ie they act as if they have an implicit
barrier built into them). As TCG is single-threaded all our barriers
are no-ops, so these just behave like normal loads and stores.
Signed-off-by: Michael Matz <matz@suse.de>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
In preparation for adding support for A64 load/store exclusive instructions,
widen the fields in the CPU state struct that deal with address and data values
for exclusives from 32 to 64 bits. Although in practice AArch64 and AArch32
exclusive accesses will be generally separate there are some odd theoretical
corner cases (eg you should be able to do the exclusive load in AArch32, take
an exception to AArch64 and successfully do the store exclusive there), and it's
also easier to reason about.
The changes in semantics for the variables are:
exclusive_addr -> extended to 64 bits; -1ULL for "monitor lost",
otherwise always < 2^32 for AArch32
exclusive_val -> extended to 64 bits. 64 bit exclusives in AArch32 now
use the high half of exclusive_val instead of a separate exclusive_high
exclusive_high -> is no longer used in AArch32; extended to 64 bits as
it will be needed for AArch64's pair-of-64-bit-values exclusives.
exclusive_test -> extended to 64 bits, as it is an address. Since this is
a linux-user-only field, in arm-linux-user it will always have the top
32 bits zero.
exclusive_info -> stays 32 bits, as it is neither data nor address, but
simply holds register indexes etc. AArch64 will be able to fit all its
information into 32 bits as well.
Note that the refactoring of gen_store_exclusive() coincidentally fixes
a minor bug where ldrexd would incorrectly update the first CPU register
even if the load for the second register faulted.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
The common pattern for system registers in a 64-bit capable ARM
CPU is that when in AArch32 the cp15 register is a view of the
bottom 32 bits of the 64-bit AArch64 system register; writes in
AArch32 leave the top half unchanged. The most natural way to
model this is to have the state field in the CPU struct be a
64 bit value, and simply have the AArch32 TCG code operate on
a pointer to its lower half.
For aarch64-linux-user the only registers we need to share like
this are the thread-local-storage ones. Widen their fields to
64 bits and provide the 64 bit reginfo struct to make them
visible in AArch64 state. Note that minor cleanup of the AArch64
system register encoding space means We can share the TPIDR_EL1
reginfo but need split encodings for TPIDR_EL0 and TPIDRRO_EL0.
Since we're touching almost every line in QEMU that uses the
c13_tls* fields in this patch anyway, we take the opportunity
to rename them in line with the standard ARM architectural names
for these registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
This improves readability and simplifies the code.
Cc: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The env->pstate field is a little odd since it doesn't strictly
speaking represent an architectural register. However it's convenient
for QEMU to use it to hold the various PSTATE architectural bits
in the same format the architecture specifies for SPSR registers
(since this is the same format the kernel uses for signal handlers
and the KVM register). Add some structure to how we deal with it:
* document what env->pstate is
* add some #defines for various bits in it
* add helpers for reading/writing it taking account of caching
of NZCV, and use them where appropriate
* reset it on startup
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1385645602-18662-3-git-send-email-peter.maydell@linaro.org
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
# By Richard Henderson
# Via Richard Henderson
* rth/auxv-2:
linux-user: Use qemu_getauxval for AT_EXECFD
util: Use qemu_getauxval in linux qemu_cache_utils_init
tcg-s390: Use qemu_getauxval in query_facilities
tcg-arm: Use qemu_getauxval
tcg-ppc64: Use qemu_getauxval
osdep: Create qemu_getauxval and qemu_init_auxval
Message-id: 1385757754-10702-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
With this we no longer pass down envp, and thus all systems can have
the same void prototype. So also eliminate a useless thunk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Creating target_structs header in linux-user/$arch/ and making
target_ipc_perm and target_shmid_ds its first inhabitants.
The struct defintions may/should be further fine-tuned by arch maintainers.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Use target address rather than host address when performing
non-GOT relocations
Signed-off-by: Corey J. Boyle <corey@kansanian.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some targets use a stat64 structure for the stat64 syscall while others
use a stat structure. SPARC64 used the wrong kind.
Instead of extending the conditional compilation in syscall.c, now a
macro TARGET_HAS_STRUCT_STAT64 is defined whenever a target has a
target_stat64.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Since this is only read in cpu_copy() and linux-user has a global
cpu_model, drop the field from generic code.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It is only used there and is deemed very fragile if not incorrect in its
current memcpy() form. Moving it into linux-user will allow to move
parts into target_cpu.h headers and only copy what the ABI mandates.
Signed-off-by: Andreas Färber <afaerber@suse.de>
If the host lacks SOCK_CLOEXEC, bail out with -EINVAL.
If the host lacks SOCK_ONONBLOCK, try to emulate it with fcntl()
and O_NONBLOCK.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
With nptl enabled, atomic_cmpxchg_32 and atomic_barrier
system calls are needed. This patch enabled really dummy
versions of the system calls, modeled after the m68k
kernel code.
With this patch I am able to execute m68k binaries
with qemu linux-user (busybox compiled for coldfire).
[v2] que an segfault instead of returning a EFAULT
to keep in line with kernel code.
Cc: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
microMIPS instructions that cause breakpoint exceptions come in
16-bit and 32-bit variants. When handling exceptions caused by
such instructions, the instruction type needs to be taken into
account when extracting the break code.
The code has also been restructured for better clarity.
Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Previous implementation does not take into account that SOL_SOCKET constant
can be arch specific. This change fixes some issues with sendmsg/recvmsg.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The binfmt_misc module can calculate the credentials and security
token according to the binary instead of to the interpreter if the
'C' flag is enabled.
To be able to execute non-readable binaries, this flag implies 'O'
flag. When 'O' flag is enabled, bintfmt_misc opens the file for
reading and pass the file descriptor to the interpreter.
References:
linux/Documentation/binfmt_misc.txt ['O' and 'C' description]
linux/fs/binfmt_misc.c linux/fs/binfmt_elf.c [ AT_EXECFD usage ]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This is needed to be able to run dhclient.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
This patch allows to have IP addresses in correct order
in the case of "netstat -nr" when the endianess of the
guest differs from one of the host.
For instance, an m68k guest on an x86_64 host:
WITHOUT this patch:
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 1.3.0.10 0.0.0.0 UG 0 0 0 eth0
0.3.0.10 0.0.0.0 0.255.255.255 U 0 0 0 eth0
$ cat /proc/net/route
Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT
eth0 00000000 0103000A 0003 0 0 0 000000000 0 0
eth0 0003000A 00000000 0001 0 0 0 00FFFFFF0 0 0
WITH this patch:
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth0
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
$ cat /proc/net/route
Iface Destination Gateway Flags RefCnt Use Metric Mask MTU Window IRTT
eth0 00000000 0a000301 0003 0 0 0 000000000 0 0
eth0 0a000300 00000000 0001 0 0 0 ffffff000 0 0
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The name field of MIPS_SYS isn't actually used; it's just documentation.
But adjust the umount entries to match mips/syscall_nr.h anyway.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
It has been pointed out on LKML that the alpha umount syscall numbers
are named wrong, and a patch to rectify that has been posted for 3.11.
Glibc works around this by treating NR_umount as NR_umount2 if
NR_oldumount exists. That's more complicated than we need in QEMU,
given that we control linux-user/*/syscall_nr.h.
This is the last instance of TARGET_NR_oldumount, so delete that from
the strace.list.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add a missing "function" and replace "and" by "any".
BSD and Linux use the same documentation here, so fix both.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds support for AArch64 in all the small corners of
linux-user (primarily in image loading and startup code).
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-22-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-11-git-send-email-john.rigby@linaro.org
[PMM:
* removed some unnecessary #defines from syscall.h
* catch attempts to use a 32 bit only cpu with aarch64-linux-user
* termios stuff moved into its own patch
* we specify our minimum uname version here now
]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For newer target architectures, glibc can be picky about the kernel
version: for example, it will not run on an aarch64 system unless
the kernel reports itself as at least 3.8.0. Accommodate this by
enhancing the existing support for faking the kernel version so
that each target can optionally specify a minimum version: if
the user doesn't force a specific fake version then we will override
with the minimum required version only if the real host kernel
version is insufficient.
Use this facility to let aarch64 report a minimum of 3.8.0.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-21-git-send-email-peter.maydell@linaro.org
Add the AArch64 termbits.h with all the target's termios related
constants and structures.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-20-git-send-email-peter.maydell@linaro.org
[PMM: split out from another patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-19-git-send-email-peter.maydell@linaro.org
[PMM: pulled out from another patch; don't use is_a64() here;
moved to linux-user from target-arm]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On ARM, linux-user emulation includes NWFPE support for emulating the
ancient FPA floating point coprocessor. This has long since been
superseded by VFP and is only required for legacy binaries. The
AArch64 linux-user target doesn't compile in NWFPE support, so make
sure the relevant code is protected by suitable ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-18-git-send-email-peter.maydell@linaro.org
This patch adds signal handling for AArch64. The code is based on the
respective source in the Linux kernel.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-17-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-10-git-send-email-john.rigby@linaro.org
[PMM: fixed style nits: tabs, long lines;
pulled target_signal.h in from a later patch; it fits better here]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Some syscall handlers have special code for ARM enabled that we don't
need on AArch64. Exclude AArch64 in those cases. In other places we
can share struct definitions with other targets or have to provide our
own.
With this patch applied, most syscall definitions in linux-user should
be sound for AArch64.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-16-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-9-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The AArch64 syscall definitions are all publicly available in the Linux
kernel. Let's add them to our linux-user emulation target, so that we
can easily handle AArch64 syscalls.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-15-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-8-git-send-email-john.rigby@linaro.org
[PMM: changes relating to cpu_loop() removed as they are superseded
by an earlier patch]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add the main linux-user cpu loop for AArch64. Since AArch64
has a different system call interface, doesn't need to worry
about FPA emulation and may in the future keep the prefetch/data
abort information in different system registers, it's simplest
just to use a completely separate loop from the 32 bit ARM
target, rather than peppering it with ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-14-git-send-email-peter.maydell@linaro.org
32-bit ARM has a lot of different names for different types of CPUs it supports.
On AArch64, we don't have this, so we really don't want to execute the 32-bit
logic. Stub it out for AArch64 linux-user guests.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: John Rigby <john.rigby@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1378235544-22290-13-git-send-email-peter.maydell@linaro.org
Message-id: 1368505980-17151-7-git-send-email-john.rigby@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The m68k set_thread_area syscall implementation failed to set the
return value. Correctly set it zero, since this syscall will always
succeed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375093909-13653-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Rephrase code used in ARM sigreturn functions to avoid using
uninitialized variables. This fixes one genuine problem ('frame'
would not be initialized if we took the error-exit path because
our stackpointer was misaligned) and one which is clang being
alarmist (frame_addr wouldn't be initialized, though this is
harmless since unlock_user_struct ignores its second argument
in these cases; however since we don't generally make use of
this not-really-documented effect it's better avoided).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375095632-13735-3-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Silence a clang warning in a PPC signal return function:
/home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/signal.c:4611:9: error: variable 'sr_addr' is used
uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized]
if (!lock_user_struct(VERIFY_READ, sc, sc_addr, 1))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/signal.c:4636:28: note: uninitialized use occurs here
unlock_user_struct(sr, sr_addr, 1);
^~~~~~~
/home/petmay01/linaro/qemu-from-laptop/qemu/linux-user/qemu.h:442:27: note: expanded from macro 'unlock_user_struct'
unlock_user(host_ptr, guest_addr, (copy) ? sizeof(*host_ptr) : 0)
^
This happens when we unlock a user struct which we never
attempted to lock. Strictly, clang is actually wrong here -- it
hasn't been able to spot that unlock_user_struct() doesn't use
its second argument if the first is NULL. However it doesn't
seem too unreasonable to demand that we pass in initialized
values to it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1375095632-13735-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
sys_mremap missed 5th argument (new_address), which caused examples that
remap to a specific address to fail.
sys_splice missed 5th and 6th argument which caused different examples to
fail.
This change has an effect on MIPS target only.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
* riku/linux-user-for-upstream: (21 commits)
linux-user: Handle compressed ISA encodings when processing MIPS exceptions
linux-user: Unlock mmap_lock when resuming guest from page_unprotect
linux-user: Reset copied CPUs in cpu_copy() always
linux-user: Fix epoll on ARM hosts
linux-user: fix segmentation fault passing with h2g(x) != x
linux-user: Fix pipe syscall return for SPARC
linux-user: Fix target_stat and target_stat64 for OpenRISC
linux-user: Avoid conditional cpu_reset()
configure: Make NPTL non-optional
linux-user: Enable NPTL for x86-64
linux-user: Add i386 TLS setter
linux-user: Clean up handling of clone() argument order
linux-user: Add missing 'break' in i386 get_thread_area syscall
linux-user: Enable NPTL for m68k
linux-user: Enable NPTL for SPARC targets
linux-user: Enable NPTL for OpenRISC
linux-user: Move includes of target-specific headers to end of qemu.h
configure: Enable threading for unicore32-linux-user
configure: Enable threading on all ppc and mips linux-user targets
configure: Don't say target_nptl="no" if there is no linux-user target
...
Conflicts:
linux-user/main.c
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Decode trap instructions during the handling of an EXCP_BREAK or EXCP_TRAP
according to the current ISA mode.
Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When a new thread gets created, we need to reset non arch specific state to
get the new CPU into clean state.
However this reset should happen before the arch specific CPU contents get
copied over. Otherwise we end up having clean reset state in our newly created
thread.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The epoll emulation uses data structures without packing them, so the
compiler might choose to add padding inside.
This patch makes the most offending one (target_epoll_event) a packed
structure to make sure we don't pad it by accident. ARM would pad it,
so declare the padding mandatory for ARM targets.
This fixes i386-on-ARM epoll emulation for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
SPARC is one of the CPUs which has a funny syscall ABI for the
pipe syscall; add it to the set of special cases in do_pipe().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
OpenRISC uses the asm-generic versions of target_stat and
target_stat64, but it was incorrectly using the x86/ARM/etc version
due to a misplaced defined(TARGET_OPENRISC). The previously unused
OpenRISC section of the ifdef ladder also defined an incorrect
target_stat and omitted the target_stat64 definition. Fix
target_stat, provide target_stat64, and add a comment noting that
these are the asm-generic versions for the benefit of future ports.
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Some CPUs reset as part of cpu_init(), some others were reset
afterwards, some not at all. While some targets didn't implement a
cpu_[state_]reset() function, QOM cpu_reset() is always available.
There's nothing wrong with resetting twice on startup, so drop
the #ifdef.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Now all linux-user targets support building with NPTL, we can make it
mandatory. This is a good idea because:
* NPTL is no longer new and experimental; it is completely standard
* in practice, linux-user without NPTL is nearly useless for
binaries built against non-ancient glibc
* it allows us to delete the rather untested code for handling
the non-NPTL configuration
Note that this patch leaves the CONFIG_USE_NPTL ifdefs in the
bsd-user codebase alone. This makes no change for bsd-user, since
our configure test for NPTL had a "#include <linux/futex.h>"
which means bsd-user would never have been compiled with
CONFIG_USE_NPTL defined, and it still is not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add x86-64 implementation of cpu_set_tls() (like the kernel, we
just have to call do_arch_prctl() to set FS); this allows us to
enable NPTL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
We can easily set the TLS on i386. Add code to do so.
Signed-off-by: Alexander Graf <agraf@suse.de>
[PMM: also remove "target_nptl=no" line from configure, for
consistency with other patches in this series]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Linux manages to have three separate orderings of the arguments to
the clone() syscall on different architectures. In the kernel these
are selected via CONFIG_CLONE_BACKWARDS and CONFIG_CLONE_BACKWARDS2.
Clean up our implementation of this to use similar #define names
rather than a TARGET_* ifdef ladder.
This includes behaviour changes fixing bugs on cris, x86-64, m68k,
openrisc and unicore32. cris had explicit but wrong handling; the
others were just incorrectly using QEMU's default, which happened
to be the equivalent of CONFIG_CLONE_BACKWARDS. (unicore32 appears
to be broken in the mainline kernel in that it tries to use arg3 for
both parent_tidptr and newtls simultaneously -- we don't attempt
to emulate this bug...)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The i386 code for the get_thread_area syscall was missing a
'break' which meant it would have fallen through into the
implementation of the following syscall; add it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
For m68k, per-thread data is a purely kernel construct with no
CPU level support. Implement it via a field in the TaskState structure,
used by cpu_set_tls() and the set_thread_area/get_thread_area
syscalls. This allows us to enable compilation with NPTL.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Provide the missing cpu_set_tls(), and resolve the FIXME in
cpu_clone_regs() by clearing the carry flag for the child.
This allows us to turn on building with NPTL for SPARC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The OpenRISC kernel ignores CLONE_SETTLS in its copy_thread()
implementation, so a cpu_set_tls() implementation is a no-op.
cpu_clone_regs() was setting the syscall return value in the
wrong register -- it is gpr[11], not gpr[2]. With these two
things fixed, we can compile with NPTL enabled.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jia Liu <proljc@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The target-specific headers (target_cpu.h and target_signal.h)
might need to use the target-independent structure and function
definitions of qemu.h; so include them only at the bottom of
qemu.h, not the top.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
sys_futex has 6 arguments, and all of these need to be copied. Fix incorrect
declaration in the mips_syscall_args array.
This change fixes the cases where the 5th and 6th arguments have non-zero
value and have importance. An example is a Linux implementation of
pthread_cond_wait() function.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Since commit 878096eeb2 (cpu: Turn
cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no
longer needed.
Add documentation and make the functions available through qemu/log.h
outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h
was not yet possible due to convoluted include paths, so that some
devices grow an implicit and unneeded dependency on qom/cpu.h for now.
Acked-by: Michael Walle <michael@walle.cc> (for lm32)
Reviewed-by: Richard Henderson <rth@twiddle.net>
[AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Move next_cpu from CPU_COMMON to CPUState.
Move first_cpu variable to qom/cpu.h.
gdbstub needs to use CPUState::env_ptr for now.
cpu_copy() no longer needs to save and restore cpu_next.
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Rebased, simplified cpu_copy()]
Signed-off-by: Andreas Färber <afaerber@suse.de>
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU
related -- they are specific to the TLS ABI for a a particular OS.
Move them into the linux-user/ tree where they belong.
target-lm32 had entirely unused implementations, since it has no
linux-user target; just drop them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Previous implementation has failed to take into account different value of
SOCK_NONBLOCK on target and host, and existence of SOCK_CLOEXEC.
The same conversion has to be applied both for do_socket and do_socketpair,
so the code has been isolated in a static inline function.
enum sock_type in linux-user/socket.h has been extended to include
TARGET_SOCK_CLOEXEC and TARGET_SOCK_NONBLOCK, similar to definition in libc.
The patch also includes necessary code style changes (tab to spaces) in the
header file since most of the file has been touched by this change.
Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
Message-id: 1372639454-7560-1-git-send-email-petar.jovanovic@rt-rk.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Commit c0d472b12e accidentally dropped the definition of
__NR_SYS_utimensat even though its use is guarded by
CONFIG_UTIMENSAT, not CONFIG_ATFILE. Some older glibc don't
have utimensat() (even if they have the other *at() functions).
Fix this by correctly cleaning up the sys_utimensat()
implementation and #defines, so that we always provide the
syscall if needed whether we're doing it via glibc or not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Message-id: 1371743841-26110-1-git-send-email-peter.maydell@linaro.org
When translating between host and target signal numbers keep negative
numbers unchanged, avoiding access beyond array bounds.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 878v2b8sek.fsf@igel.home
This allows to pass the device name.
You can test this with the "route" command.
WITHOUT this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
SIOCADDRT: Bad address
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
WITH this patch:
$ sudo route add -net default gw 10.0.3.1 eth0
$ netstat -nr
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Ifa
0.0.0.0 10.0.3.1 0.0.0.0 UG 0 0 0 eth
10.0.3.0 0.0.0.0 255.255.255.0 U 0 0 0 eth
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Some applications use /proc/$$/... (where $$ is the own pid) instead of
/proc/self/... to refer to their own proc files. Extend the interception
for open and readlink to handle this case. Also, do the same interception
in readlinkat.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Make cpustats monitor command available unconditionally.
Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec()
arguments to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
It no longer depends on CPUArchState, so move it to qom/cpu.c.
Prepares for changing GDBState::c_cpu to CPUState.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Everything else needs to match the executable name, which is
TARGET_NAME.
Before:
$ sh4eb-linux-user/qemu-sh4eb --help
usage: qemu-sh4 [options] program [arguments...]
Linux CPU emulator (compiled for sh4 emulation)
After:
$ sh4eb-linux-user/qemu-sh4eb --help
usage: qemu-sh4eb [options] program [arguments...]
Linux CPU emulator (compiled for sh4eb emulation)
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1370349928-20419-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The linux-user syscall emulation layer currently supports the
openat family of syscalls via two mechanisms: simply calling
the corresponding libc functions, and making direct syscalls.
Since glibc has supported these functions since at least glibc
2.5, there's no real need to retain the (essentially untested)
direct syscall fallback code, so simply delete it. This allows
us to remove some ifdeffery that was attempting to disable
provision of some of the syscalls if the host didn't seem to
support them, which in some cases was actually wrong (eg where
there are several flavours of the syscall and we only need
one of them, not necessarily the exact one the guest has,
as with the fstatat* calls).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Tested-by: Claudio Fontana <claudio.fontana@huawei.com>
Message-id: 1370126121-22975-2-git-send-email-peter.maydell@linaro.org