Add QEMUFile interface to allow a socket to be 'shut down' - i.e. any
reads/writes will fail (and any blocking read/write will be woken).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
The QEMUFileStdio code will use qemu_file_is_writable() and will be
moved to a separate file.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This is based on Stefan and Joel's patch that creates a QEMUFile that goes
to a memory buffer; from:
http://lists.gnu.org/archive/html/qemu-devel/2013-03/msg05036.html
Using the QEMUFile interface, this patch adds support functions for
operating on in-memory sized buffers that can be written to or read from.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Signed-off-by: Joel Schopp <jschopp@linux.vnet.ibm.com>
For fixes/tweeks I've done:
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Make qemu_peek_buffer repeatedly call fill_buffer until it gets
all the data it requires, or until there is an error.
At the moment, qemu_peek_buffer will try one qemu_fill_buffer if there
isn't enough data waiting, however the kernel is entitled to return
just a few bytes, and still leave qemu_peek_buffer with less bytes
than it needed. I've seen this fail in a dev world, and I think it
could theoretically fail in the peeking of the subsection headers in
the current world.
Comment qemu_peek_byte to point out it's not guaranteed to work for
non-continuous peeks
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: ChenLiang <chenliang0016@icloud.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The QEMUFile code will be moved to qemu-file.c. This will require making
the following functions non-static because they are used by the savevm.c
code:
* qemu_peek_byte()
* qemu_peek_buffer()
* qemu_file_skip()
* qemu_file_set_error()
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
These are the prototypes and implementation of new hooks that
RDMA takes advantage of to perform dynamic page registration.
An optional hook is also introduced for a custom function
to be able to override the default save_page function.
Also included are the prototypes and accessor methods used by
arch_init.c which invoke funtions inside savevm.c to call out
to the hooks that may or may not have been overridden
inside of QEMUFileOps.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA uses this to flush the control channel before sending its
own message to handle page registrations.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
QEMUFileRDMA also has read and write modes. This function is now
shared to reduce code duplication.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
RDMA writes happen asynchronously, and thus the performance accounting
also needs to be able to occur asynchronously. This allows anybody
to call into savevm.c to update both f->pos as well as into arch_init.c
to update the acct_info structure with up-to-date values when
the RDMA transfer actually completes.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Tested-by: Chegu Vinod <chegu_vinod@hp.com>
Tested-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Michael R. Hines <mrhines@us.ibm.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Instead of breaking up RAM state into many small chunks, pass the iovec
to the block layer for better performance.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This allows us to add a buffer to the iovec to send without copying it
into the static buffer, the buffer will be sent later when qemu_fflush is called.
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This will allow us to write an iovec
Signed-off-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Rate limiting is now simply a byte counter; client call
qemu_file_rate_limit() manually to determine if they have to exit.
So it is possible and simple to move the functionality to QEMUFile.
This makes the remaining functionality of s->file redundant;
in the next patch we can remove it and write directly to s->migration_file.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
There is no reason for outgoing exec migration to do popen manually
anymore (the reason used to be that we needed the FILE* to make it
non-blocking). Use qemu_popen_cmd.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Right now, migration cannot entirely rely on QEMUFile's automatic
drop of I/O after an error, because it does its "real" I/O outside
the put_buffer callback. To fix this until buffering is gone, expose
qemu_file_set_error which we will use in buffered_flush.
Similarly, buffered_flush is not a complete flush because some data may
still reside in the QEMUFile's own buffer. This somewhat complicates the
process of closing the migration thread. Again, when buffering is gone
buffered_flush will disappear and calling qemu_fflush will not be needed;
in the meanwhile, we expose the function for use in migration.c.
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Migration .save_live_iterate() functions return the number of bytes
transferred. The easiest way of doing this is by calling qemu_ftell(f)
at the beginning and end of the function to calculate the difference.
Make qemu_ftell() public so that block-migration will be able to use it.
Also adjust the ftell calculation for writable files where buf_offset
does not include buf_size.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 1360661835-28663-2-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move all the writes to the migration_thread, and make writings
blocking. Notice that are still using the iothread for everything
that we do.
Signed-off-by: Juan Quintela <quintela@redhat.com>