Else the log will be flooded if there is a lot of network
traffic.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The chr_out chardev is connected to a filter-redirector
running in the main loop. qemu_chr_fe_write_all might block
here in compare_chr_send if the (socket-)buffer is full.
If another filter-redirector in the main loop want's to
send data to chr_pri_in it might also block if the buffer
is full. This leads to a deadlock because both event loops
get blocked.
Fix this by converting compare_chr_send to a coroutine and
putting the packets in a send queue.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Tested-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
qemu_bh_new will set the bh to be executed in the main
loop. This causes crashes as colo_compare_handle_event assumes
that it has exclusive access the queues, which are also
concurrently accessed in the iothread.
Create the bh with the AioContext of the iothread to fulfill
these assumptions and fix the crashes. This is safe, because
the bh already takes the appropriate locks.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Derek Su <dereksu@qnap.com>
Tested-by: Derek Su <dereksu@qnap.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The sender of packet will be checked in the qemu_net_queue_purge() but
we use NetClientState not its peer when trying to purge the incoming
queue in qemu_flush_or_purge_packets(). This will trigger the assert
in virtio_net_reset since we can't pass the sender check:
hw/net/virtio-net.c:533: void virtio_net_reset(VirtIODevice *): Assertion
`!virtio_net_get_subqueue(nc)->async_tx.elem' failed.
#9 0x55a33fa31b78 in virtio_net_reset hw/net/virtio-net.c:533:13
#10 0x55a33fc88412 in virtio_reset hw/virtio/virtio.c:1919:9
#11 0x55a341d82764 in virtio_bus_reset hw/virtio/virtio-bus.c:95:9
#12 0x55a341dba2de in virtio_pci_reset hw/virtio/virtio-pci.c:1824:5
#13 0x55a341db3e02 in virtio_pci_common_write hw/virtio/virtio-pci.c:1252:13
#14 0x55a33f62117b in memory_region_write_accessor memory.c:496:5
#15 0x55a33f6205e4 in access_with_adjusted_size memory.c:557:18
#16 0x55a33f61e177 in memory_region_dispatch_write memory.c:1488:16
Reproducer:
https://www.mail-archive.com/qemu-devel@nongnu.org/msg701914.html
Fix by using the peer.
Reported-by: "Alexander Bulekov" <alxndr@bu.edu>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Fixes: ca77d85e1d ("net: complete all queued packets on VM stop")
Cc: qemu-stable@nongnu.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
The '\n' sneaked in by accident here, an "id" string should really
not contain a newline character at the end.
Fixes: 78cd6f7bf6 ('net: Add a new convenience option "--nic" ...')
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20200518074352.23125-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
The "expired_scan_cycle" determines period of scanning expired
primary node net packets.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The "compare_timeout" determines the maximum time to hold the primary net packet.
This patch expose the "compare_timeout", make user have ability to
adjest the value according to application scenarios.
QMP command demo:
{ "execute": "qom-get",
"arguments": { "path": "/objects/comp0",
"property": "compare_timeout" } }
{ "execute": "qom-set",
"arguments": { "path": "/objects/comp0",
"property": "compare_timeout",
"value": 5000} }
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The CanBusClientInfo::can_receive handler return whether the
device can or can not receive new frames. Make it obvious by
returning a boolean type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The NetCanReceive handler return whether the device can or
can not receive new packets. Make it obvious by returning
a boolean type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
-----BEGIN PGP SIGNATURE-----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=VWQB
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2020-03-17' into staging
QAPI patches for 2020-03-17
# gpg: Signature made Tue 17 Mar 2020 20:50:54 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-qapi-2020-03-17: (30 commits)
net: Track netdevs in NetClientState rather than QemuOpt
net: Complete qapi-fication of netdev_add
qmp: constify QmpCommand and list
qapi: Mark deprecated QMP parts with feature 'deprecated'
qapi: New special feature flag "deprecated"
qapi: Replace qmp_dispatch()'s TODO comment by an explanation
qapi: Simplify how qmp_dispatch() gets the request ID
qapi: Simplify how qmp_dispatch() deals with QCO_NO_SUCCESS_RESP
qapi: Inline do_qmp_dispatch() into qmp_dispatch()
qapi: Add feature flags to struct members
qapi/schema: Call QAPIDoc.connect_member() in just one place
qapi/schema: Rename QAPISchemaObjectType{Variant,Variants}
qapi/schema: Reorder classes so related ones are together
qapi/schema: Change _make_features() to a take feature list
qapi/introspect: Factor out _make_tree()
qapi/introspect: Rename *qlit* to reduce confusion
qapi: Consistently put @features parameter right after @ifcond
qapi: Add feature flags to remaining definitions
qapi/schema: Clean up around QAPISchemaEntity.connect_doc()
tests/test-qmp-event: Check event is actually emitted
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As mentioned in the previous patch, our use of QemuOpt group "netdev"
has two purposes: collect the CLI arguments, and serve as a witness
for monitor hotplug actions. As the latter didn't use anything but an
id, it felt rather unclean to have to touch QemuOpts at all when going
through QMP, so let's instead track things with a bool field in
NetClientState.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-3-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
We've had all the required pieces for doing a type-safe representation
of netdev_add as a flat union for quite some time now (since
0e55c381f6 in v2.7.0, released in 2016), but did not make the final
switch to using it because of concern about whether a command-line
regression in accepting "1" in place of 1 for integer arguments would
be problematic. Back then, we did not have the deprecation cycle to
allow us to make progress. But now that we have waited so long, other
problems have crept in: for example, our desire to add
qemu-storage-daemon is hampered by the inability to express net
objects, and we are unable to introspect what we actually accept.
Additionally, our round-trip through QemuOpts silently eats any
argument that expands to an array, rendering dnssearch, hostfwd, and
guestfwd useless through QMP:
{"execute": "netdev_add", "arguments": { "id": "netdev0",
"type": "user", "dnssearch": [
{ "str": "8.8.8.8" }, { "str": "8.8.4.4" }
]}}
So without further ado, let's turn on proper QAPI. netdev_add() was a
trivial wrapper around net_client_init(), which did a few steps prior
to calling net_client_init1(); with this patch, we now skip directly
to net_client_init1(). In addition to fixing array parameters, the
following additional differences occur:
- {"execute": "netdev_add", "arguments": {"type": "help"}}
no longer attempts to print help to stdout and exit. Bug fix, broken
in 547203ead4 'net: List available netdevs with "-netdev help"',
v2.12.0.
- {"execute": "netdev_add", "arguments': {... "ipv6-net": "..." }}
no longer attempts to desugar the undocumented ipv6-net magic string
into the proper "ipv6-prefix" and "ipv6-prefixlen". Undocumented
misfeature, introduced in commit 7aac531ef2 "qapi-schema, qemu-options
& slirp: Adding Qemu options for IPv6 addresses", v2.6.0.
- {'execute':'netdev_add',
'arguments':{'id':'net2', 'type':'hubport', 'hubid':"2"}}
{"error": {"class": "GenericError", "desc": "Invalid parameter type for 'hubid', expected: integer"}}
Used to succeed: since our command line treats everything as strings,
our not-so-round-trip conversion from QAPI -> QemuOpts -> QAPI lost
the original typing and turned everything into a string; now that we
skip the QemuOpts, the JSON input has to match the exact QAPI type.
But this stricter QMP is desirable, and introspection is sufficient
for any affected applications to make sure they use it correctly.
In qmp_netdev_add(), we still have to create a QemuOpts object so that
qmp_netdev_del() will be able to remove a hotplugged network device;
but the opts->head remains empty since we now manage all parsing
through the QAPI object rather than QemuOpts; a separate patch will
address the abuse of QemuOpts as a witness for whether a
NetClientState is a netdev. In the meantime, our argument that we are
okay requires auditing all uses of option group "netdev":
- qemu_netdev_opts: option group definition, empty .desc[]
- CLI (CLI netdev parsing ends before monitors start, so while
monitors can mess with CLI netdevs, CLI cannot mess with
monitor netdevs):
- main() case QEMU_OPTION_netdev: store CLI definition
- main() case QEMU_OPTION_readconfig, case QEMU_OPTION_writeconfig:
similar, dealing only with CLI
- net_init_clients(): Pass CLI to net_client_init()
- Monitor:
- hmp_netdev_add(): straightforward parse into net_client_init()
- qmp_netdev_add(): subject of this patch, used to add full
object to option group, now just adds bare-bones id
- qmp_netdev_del(), netdev_del_completion(): check the option group
solely for id, as a 'is this a netdev' predicate
Reported-by: Alex Kirillov <lekiravi@yandex-team.ru>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20200317201711.322764-2-eblake@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Description copied from Linux kernel commit from Gustavo A. R. Silva
(see [3]):
--v-- description start --v--
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to
declare variable-length types such as these ones is a flexible
array member [1], introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler
warning in case the flexible array does not occur last in the
structure, which will help us prevent some kind of undefined
behavior bugs from being unadvertenly introduced [2] to the
Linux codebase from now on.
--^-- description end --^--
Do the similar housekeeping in the QEMU codebase (which uses
C99 since commit 7be41675f7).
All these instances of code were found with the help of the
following Coccinelle script:
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
};
@@
identifier s, m, a;
type t, T;
@@
struct s {
...
t m;
- T a[0];
+ T a[];
} QEMU_PACKED;
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=76497732932f
[3] https://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux.git/commit/?id=17642a2fbd2c1
Inspired-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It's been deprecated since QEMU v3.1.0. Time to finally remove it now.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191205104109.18680-1-thuth@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reworked Thomas's deprecated.texi to the rst
To switch the Secondary to Primary, we need to insert new filters
before the filter-rewriter.
Add the options insert= and position= to be able to insert filters
anywhere in the filter list.
position should be "head" or "tail" to insert at the head or
tail of the filter list or it should be "id=<id>" to specify
the id of another filter.
insert should be either "before" or "behind" to specify where to
insert the new filter relative to the one specified with position.
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum.
By using the enum in the IOEventHandler typedef we:
- make the IOEventHandler type more explicit (this handler
process out-of-band information, while the IOReadHandler
is in-band),
- help static code analyzers.
This patch was produced with the following spatch script:
@match@
expression backend, opaque, context, set_open;
identifier fd_can_read, fd_read, fd_event, be_change;
@@
qemu_chr_fe_set_handlers(backend, fd_can_read, fd_read, fd_event,
be_change, opaque, context, set_open);
@depends on match@
identifier opaque, event;
identifier match.fd_event;
@@
static
-void fd_event(void *opaque, int event)
+void fd_event(void *opaque, QEMUChrEvent event)
{
...
}
Then the typedef was modified manually in
include/chardev/char-fe.h.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20191218172009.8868-15-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The Chardev events are listed in the QEMUChrEvent enum. To be
able to use this enum in the IOEventHandler typedef, we need to
explicit all the events ignored by this frontend, to silent the
following GCC warning:
CC net/vhost-user.o
net/vhost-user.c: In function ‘net_vhost_user_event’:
net/vhost-user.c:269:5: error: enumeration value ‘CHR_EVENT_BREAK’ not handled in switch [-Werror=switch]
269 | switch (event) {
| ^~~~~~
net/vhost-user.c:269:5: error: enumeration value ‘CHR_EVENT_MUX_IN’ not handled in switch [-Werror=switch]
net/vhost-user.c:269:5: error: enumeration value ‘CHR_EVENT_MUX_OUT’ not handled in switch [-Werror=switch]
cc1: all warnings being treated as errors
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20191218172009.8868-9-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_log_lock() now returns a handle and qemu_log_unlock() receives a
handle to unlock. This allows for changing the handle during logging
and ensures the lock() and unlock() are for the same file.
Also in target/tilegx/translate.c removed the qemu_log_lock()/unlock()
calls (and the log("\n")), since the translator can longjmp out of the
loop if it attempts to translate an instruction in an inaccessible page.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-5-robert.foley@linaro.org>
Variable int err in inner scope shadows Error *err in outer scope.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191205174635.18758-3-vsementsov@virtuozzo.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
'colo_mark_tcp_pkt' should return 'true' when packets are the same, and
'false' otherwise. However, it returns 'true' when
'colo_compare_packet_payload' returns non-zero while
'colo_compare_packet_payload' is just a 'memcmp'. The result is that
COLO-compare reports inconsistent TCP packets when they are actually
the same.
Fixes: f449c9e549 ("colo: compare the packet based on the tcp sequence number")
Cc: qemu-stable@nongnu.org
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Fan Yang <Fan_Yang@sjtu.edu.cn>
Signed-off-by: Jason Wang <jasowang@redhat.com>
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJdpjPbAAoJECgfDbjSjVRpQqUH/2xyT++y8K17mCI1IILLZd3d
eOqElEHz78qlEfR2euv63YksZoeHpMO5HiAdwOGGF8CjcaCT4Hl+pPDffTYVXtt+
VZ88vSSXL49wpMcpvRGR5Isy0eXJzWilTBMu2eu8phN9tX82dlu08Oi4XGAosrBJ
uZg61DyiGDnSOpoofHhjvXJEaiL0pzkTjf8qAoW3TaVcB9NQKnunMEIDD646JS5z
AAj4+XBJfUG9cp7/MG+djjVmJDdUpjL5e5uWNWakbgUVqSbHog78RIrBoD6SH7pt
/6hHHoSM9VX1wWgdTdVdNAQAZVnWs31w4v31d8UfaT15KJEoG47U0gDgmLzXDyo=
=+xdg
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
virtio, vhost, acpi: features, fixes, tests
ARM ACPI memory hotplug support +
tests for new arm/virt ACPI tables.
Virtio fs support (no migration).
A vhost-user reconnect bugfix.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Tue 15 Oct 2019 22:02:19 BST
# gpg: using RSA key 281F0DB8D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* remotes/mst/tags/for_upstream:
virtio: add vhost-user-fs-pci device
virtio: add vhost-user-fs base device
virtio: Add virtio_fs linux headers
tests/acpi: add expected tables for arm/virt
tests: document how to update acpi tables
tests: Add bios tests to arm/virt
tests: allow empty expected files
tests/acpi: add empty files
tests: Update ACPI tables list for upcoming arm/virt tests
docs/specs: Add ACPI GED documentation
hw/arm: Use GED for system_powerdown event
hw/arm: Factor out powerdown notifier from GPIO
hw/arm/virt-acpi-build: Add PC-DIMM in SRAT
hw/arm/virt: Enable device memory cold/hot plug with ACPI boot
hw/arm/virt: Add memory hotplug framework
hw/acpi: Add ACPI Generic Event Device Support
hw/acpi: Do not create memory hotplug method when handler is not defined
hw/acpi: Make ACPI IO address space configurable
vhost-user: save features if the char dev is closed
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
That way the state can be correctly restored when the device is opened
again. This might happen if the backend is restarted.
Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1738768
Reported-by: Pei Zhang <pezhang@redhat.com>
Fixes: 6ab79a20af ("do not call vhost_net_cleanup() on running net from char user event")
Cc: ddstreet@canonical.com
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Message-Id: <20190924162044.11414-1-amorenoz@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This can be used to set a DNS server to be used by the guest which is
different from the one configured on the host.
Buglink: https://bugs.launchpad.net/qemu/+bug/1010484
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
While the tracing framework does not forbid trailing newline in
events format string, using them lead to confuse output.
It is the responsibility of the backend to properly end an event
line.
Some of our formats have trailing newlines, remove them.
[Fixed typo in commit description reported by Eric Blake
<eblake@redhat.com>
--Stefan]
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190916095121.29506-2-philmd@redhat.com
Message-Id: <20190916095121.29506-2-philmd@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 78dd48df3 removed the last caller of register_savevm_live for an
instantiable device (rather than a single system wide device);
so trim out the parameter.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190822115433.12070-1-dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This patch to fix the origin "char *data" memory leak, code style issue
and add necessary check here.
Reported-by: Coverity (CID 1402785)
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
When invoking qemu-bridge-helper in 'net_bridge_run_helper',
instead of using fixed sized buffers, use dynamically allocated
ones initialised and returned by g_strdup_printf().
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch make colo-compare can send message to remote COLO frame(Xen) when occur checkpoint.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We need use this function to send notification message for remote colo-frame(Xen).
So we add new parameter for this job.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Add chardev handler to send notification to remote(current from Xen) colo-frame.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We add the "notify_dev=chardevID" parameter. After that colo-compare can connect with
remote(currently just for Xen, KVM-COLO didn't need it.) colo-frame through chardev socket,
it can notify remote(Xen) colo-frame to handle checkpoint event.
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Previously there was a single instance of the timer used by
monitor triggered announces, that's OK, but when combined with the
previous change that lets you have announces for subsets of interfaces
it's a bit restrictive if you want to do different things to different
interfaces.
Add an 'id' field to the announce, and maintain a list of the
timers based on id.
This allows you to for example:
a) Start an announce going on interface eth0 for a long time
b) Start an announce going on interface eth1 for a long time
c) Kill the announce on eth0 while leaving eth1 going.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Allow the caller to restrict the set of interfaces that announces are
sent on. The default is still to send on all interfaces.
e.g.
{ "execute": "announce-self", "arguments": { "initial": 50, "max": 550, "rounds": 5, "step": 50, "interfaces": ["vn2", "vn1"] } }
This doesn't affect the behaviour of migraiton announcments.
Note: There's still only one timer for the qmp command, so that
performing an 'announce-self' on one list of interfaces followed
by another 'announce-self' on another list will stop the announces
on the existing set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since the get_str_sep() function is no longer used in
net/net.c, we can remove it.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Use the glib function to split host address and port in
the parse_host_port() function.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
net_client_init() uses a variable length array to store the prefix
of 'ipv6-net' parameter (e.g. if ipv6-net=fec0::0/64, the prefix
is 'fec0::0').
This patch introduces g_strsplit() to split the 'ipv6-net' parameter,
so we can remove the variable length array.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
If 'ipv6-prefixlen' is not a number, the current behaviour
produces an assertion failure:
$ qemu-system-x86_64 -net user,ipv6-net=feca::0/a
qemu-system-x86_64: qemu/util/qemu-option.c:1175: qemu_opts_foreach:
Assertion `!errp || !*errp' failed.
Aborted (core dumped)
This patch fixes it, jumping to the end of the function when
'ipv6-prefixlen' is not a number, and printing the more friendly
message:
$ qemu-system-x86_64 -net user,ipv6-net=feca::0/a
qemu-system-x86_64: Parameter 'ipv6-prefixlen' expects a number
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Buglink: https://launchpad.net/bugs/1823458
Currently, a user CHR_EVENT_CLOSED event will cause net_vhost_user_event()
to call vhost_user_cleanup(), which calls vhost_net_cleanup() for all
its queues. However, vhost_net_cleanup() must never be called like
this for fully-initialized nets; when other code later calls
vhost_net_stop() - such as from virtio_net_vhost_status() - it will try
to access the already-cleaned-up fields and fail with assertion errors
or segfaults.
The vhost_net_cleanup() will eventually be called from
qemu_cleanup_net_client().
Signed-off-by: Dan Streetman <ddstreet@canonical.com>
Message-Id: <20190416184624.15397-3-dan.streetman@canonical.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Because event_unhandled_count may be accessed concurrently, it needs
to be protected by taking the lock. However the assert is outside the
lock, probably causing it to read garbage and aborting Qemu erroneously.
The Bug only happens when running Qemu in COLO mode.
This Patch fixes the following bug: https://bugs.launchpad.net/qemu/+bug/1824622
Signed-off-by: Lukas Straub <lukasstraub2@web.de>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reword and add a missing parentheses at the end of the
error message.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Header guard symbols should match their file name to make guard
collisions less likely.
Cleaned up with scripts/clean-header-guards.pl, followed by some
renaming of new guard symbols picked by the script to better ones.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190315145123.28030-6-armbru@redhat.com>
[Rebase to master: update include/hw/net/ne2000-isa.h]
We are printing all other help output to stdout already (e.g. "-help",
"-cpu help" and "-machine help" output). So the "-net nic,model=help"
output should go to stdout instead of stderr, too. And while we're at
it, also print the NICs line by line, like we do it e.g. with the
"-cpu help" or "-M help" output, too.
Buglink: https://bugs.launchpad.net/qemu/+bug/1574327
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190423160608.7519-1-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The fcntl will change the flags directly, use qemu_set_nonblock()
instead.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
-net socket has a fd argument, and may be passed pre-opened sockets.
TCP sockets use framing.
UDP sockets have datagram boundaries.
When given a unix dgram socket, it will be able to read from it, but
will attempt to send on the dgram_dst, which is unset. The other end
will not receive the data.
Let's teach -net socket to recognize a UNIX DGRAM socket, and use the
regular send() command (without dgram_dst).
This makes running slirp out-of-process possible that
way (python pseudo-code):
a, b = socket.socketpair(socket.AF_UNIX, socket.SOCK_DGRAM)
subprocess.Popen('qemu -net socket,fd=%d -net user' % a.fileno(), shell=True)
subprocess.Popen('qemu ... -net nic -net socket,fd=%d' % b.fileno(), shell=True)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
We spell out sub/dir/ in sub/dir/trace-events' comments pointing to
source files. That's because when trace-events got split up, the
comments were moved verbatim.
Delete the sub/dir/ part from these comments. Gets rid of several
misspellings.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190314180929.27722-3-armbru@redhat.com
Message-Id: <20190314180929.27722-3-armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Take a VhostUserState* that can be pre-allocated, and initialize it
with the associated chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Tiwei Bie <tiwei.bie@intel.com>
Message-Id: <20190308140454.32437-4-marcandre.lureau@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Use the "system" libslirp if its present or requested.
Else build with a static libslirp.a if slirp/ is checked
out ("internal") or a submodule ("git").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-7-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Prepare for making slirp/ a standalone project.
Remove some useless includes while at it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-5-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
slirp migration code uses QEMU vmstate so far, when building WITH_QEMU.
Introduce slirp_state_{load,save,version}() functions to move the
state saving handling to libslirp side.
So far, the bitstream compatibility should remain equal with current
QEMU, as this is effectively using the same code, with the same format
etc. When libslirp is made standalone, we will need some mechanism to
ensure bitstream compatibility regardless of the libslirp version
installed. See the FIXME note in the code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20190212162524.31504-3-marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add a qmp command that can trigger guest announcements.
It uses its own announce-timer instance, and parameters
passed to it explicitly in the command.
Like most qmp commands, it's in the main thread/bql, so
there's no racing with any outstanding timer.
Based on work of Germano Veit Michel <germano@redhat.com> and
Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Some network devices have a capability to do self announcements
(ex: virtio-net). Add infrastructure that would allow devices
to expose this ability.
Signed-off-by: Vladislav Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Switch the announcements to using the new announce timer.
Move the code that does it to announce.c rather than savevm
because it really has nothing to do with the actual migration.
Migration starts the announce from bh's and so they're all
in the main thread/bql, and so there's never any racing with
the timers themselves.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
The 'announce timer' will be used by migration, and explicit
requests for qemu to perform network announces.
Based on the work by Germano Veit Michel <germano@redhat.com>
and Vlad Yasevich <vyasevic@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Changes:
- Save CPU cycles by computing the return value while scanning the
input iovec, rather than calling iov_size() at the end.
- Remove check for s->tx != NULL, because it cannot happen.
- Cache ring->tail in a local variable and use it to check for
space in the TX ring. The use of nm_ring_empty() was invalid,
because nobody is updating ring->cur and ring->head at that point.
- In case we run out of netmap slots in the middle of a packet,
move the wake-up point by advancing ring->cur, but do not
expose the incomplete packet (i.e., by updating also ring->head).
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Improve code reuse by implementing netmap_receive() with a call
to netmap_receive_iov().
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This change improves the handling of incomplete multi-slot packets
(e.g. with the NS_MOREFRAG set), by advancing ring->head only on
complete packets. The ring->cur pointer is advanced in any case in
order to acknowledge the kernel and move the wake-up point (thus
avoiding repeated wake-ups).
Also don't be verbose when incomplete packets are found.
Signed-off-by: Vincenzo Maffione <v.maffione@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Fix duplicated code:
https://bugs.launchpad.net/qemu/+bug/1811499
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Zhang Chen <chen.zhang@intel.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
vhost-user already has a way to communicate the endianness of the guest
via the vring endianness messages. The vring endianness always matches
the vnet header endianness so there is no need to do anything else in
the backend.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1543851204-41186-9-git-send-email-pbonzini@redhat.com>
Message-Id: <1550165756-21617-5-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
hw/net/vhost_net.c needs functions that are declared in net/vhost-user.c: the
vhost-user code is always compiled into QEMU, only the constructor
net_init_vhost_user is unreachable. Also, net/vhost-user.c needs functions
declared in hw/virtio/vhost-stub.c even if no virtio device exists.
Break this dependency. First, add a minimal version of net/vhost-user.c,
with no functionality and no dependency on vhost code. Second, #ifdef out
the calls back to net/vhost-user.c from hw/net/vhost_net.c.
While at it, this patch fixes the CONFIG_VHOST_NET_USE*D* typo.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <1543851204-41186-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1550165756-21617-3-git-send-email-pbonzini@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will be needed by vhost-user-test, when each test switches to
its own GMainLoop and GMainContext. Otherwise, for a reconnecting
socket the initial connection will happen on the default GMainContext,
and no one will be listening on it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20190202110834.24880-1-pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This is friendlier for FFI bindings.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
It would be legitimate to use libslirp without glib. Let's
add_poll/get_revents pair of callbacks to provide the same
functionality.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Remove hard-coded dependency on slirp in main-loop, and use a "poll"
notifier instead. The notifier is registered per slirp instance.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Use a more descriptive name for the callback.
Reuse the SlirpWriteCb type. Wrap it to check that all data has been written.
Return a ssize_t for potential error handling and data-loss reporting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Introduce a SlirpCb callback to kick the main io-thread.
Add an intermediary sodrop() function that will call SlirpCb.notify
callback when sbdrop() returns true.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Add a counter-part to register_poll_fd() for completeness.
(so far, register_poll_fd() is called only on struct socket fd)
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Replace qemu_set_nonblock() with slirp_set_nonblock()
qemu_set_nonblock() does some event registration with the main
loop. Add a new callback register_poll_fd() for that reason.
Always build the fd-register stub, to avoid #if WIN32.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Instead of calling into QEMU chardev directly, and mixing it with
slirp_add_exec() handling, add a new function slirp_add_guestfwd()
which takes a write callback.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Since commit 12f8def0e0 (v2.9), qemu
requires Vista. Let's remove some conditional code.
Note that this introduces a missing declaration warning with mingw.
warning: implicit declaration of function 'inet_ntop'
See also: https://sourceforge.net/p/mingw-w64/mailman/message/36473782/
We could workaround it by declaring it ourself depending on __MINGW64_VERSION_*:
WINSOCK_API_LINKAGE INT WSAAPI inet_pton(int Family, PCTSTR pszAddrString, PVOID pAddrBuf);
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Only slirp/libslirp.h should be included.
Instead of using some slirp declarations and utility functions directly,
let's copy them in net/util.h.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This will bring slirp a bit forward to the state of an independent
project.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
There is nothing performance-sensitive in returning an allocated
string for info, and handling the monitor_printf() on the caller side.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Let's not mix command line and chardev pointers.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Let's make the slirp interface a bit more library-like.
Associate the slirp_output() with a Slirp context.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Most files that have TABs only contain a handful of them. Change
them to spaces so that we don't confuse people.
disas, standard-headers, linux-headers and libdecnumber are imported
from other projects and probably should be exempted from the check.
Outside those, after this patch the following files still contain both
8-space and TAB sequences at the beginning of the line. Many of them
have a majority of TABs, or were initially committed with all tabs.
bsd-user/i386/target_syscall.h
bsd-user/x86_64/target_syscall.h
crypto/aes.c
hw/audio/fmopl.c
hw/audio/fmopl.h
hw/block/tc58128.c
hw/display/cirrus_vga.c
hw/display/xenfb.c
hw/dma/etraxfs_dma.c
hw/intc/sh_intc.c
hw/misc/mst_fpga.c
hw/net/pcnet.c
hw/sh4/sh7750.c
hw/timer/m48t59.c
hw/timer/sh_timer.c
include/crypto/aes.h
include/disas/bfd.h
include/hw/sh4/sh.h
libdecnumber/decNumber.c
linux-headers/asm-generic/unistd.h
linux-headers/linux/kvm.h
linux-user/alpha/target_syscall.h
linux-user/arm/nwfpe/double_cpdo.c
linux-user/arm/nwfpe/fpa11_cpdt.c
linux-user/arm/nwfpe/fpa11_cprt.c
linux-user/arm/nwfpe/fpa11.h
linux-user/flat.h
linux-user/flatload.c
linux-user/i386/target_syscall.h
linux-user/ppc/target_syscall.h
linux-user/sparc/target_syscall.h
linux-user/syscall.c
linux-user/syscall_defs.h
linux-user/x86_64/target_syscall.h
slirp/cksum.c
slirp/if.c
slirp/ip.h
slirp/ip_icmp.c
slirp/ip_icmp.h
slirp/ip_input.c
slirp/ip_output.c
slirp/mbuf.c
slirp/misc.c
slirp/sbuf.c
slirp/socket.c
slirp/socket.h
slirp/tcp_input.c
slirp/tcpip.h
slirp/tcp_output.c
slirp/tcp_subr.c
slirp/tcp_timer.c
slirp/tftp.c
slirp/udp.c
slirp/udp.h
target/cris/cpu.h
target/cris/mmu.c
target/cris/op_helper.c
target/sh4/helper.c
target/sh4/op_helper.c
target/sh4/translate.c
tcg/sparc/tcg-target.inc.c
tests/tcg/cris/check_addo.c
tests/tcg/cris/check_moveq.c
tests/tcg/cris/check_swap.c
tests/tcg/multiarch/test-mmap.c
ui/vnc-enc-hextile-template.h
ui/vnc-enc-zywrle.h
util/envlist.c
util/readline.c
The following have only TABs:
bsd-user/i386/target_signal.h
bsd-user/sparc64/target_signal.h
bsd-user/sparc64/target_syscall.h
bsd-user/sparc/target_signal.h
bsd-user/sparc/target_syscall.h
bsd-user/x86_64/target_signal.h
crypto/desrfb.c
hw/audio/intel-hda-defs.h
hw/core/uboot_image.h
hw/sh4/sh7750_regnames.c
hw/sh4/sh7750_regs.h
include/hw/cris/etraxfs_dma.h
linux-user/alpha/termbits.h
linux-user/arm/nwfpe/fpopcode.h
linux-user/arm/nwfpe/fpsr.h
linux-user/arm/syscall_nr.h
linux-user/arm/target_signal.h
linux-user/cris/target_signal.h
linux-user/i386/target_signal.h
linux-user/linux_loop.h
linux-user/m68k/target_signal.h
linux-user/microblaze/target_signal.h
linux-user/mips64/target_signal.h
linux-user/mips/target_signal.h
linux-user/mips/target_syscall.h
linux-user/mips/termbits.h
linux-user/ppc/target_signal.h
linux-user/sh4/target_signal.h
linux-user/sh4/termbits.h
linux-user/sparc64/target_syscall.h
linux-user/sparc/target_signal.h
linux-user/x86_64/target_signal.h
linux-user/x86_64/termbits.h
pc-bios/optionrom/optionrom.h
slirp/mbuf.h
slirp/misc.h
slirp/sbuf.h
slirp/tcp.h
slirp/tcp_timer.h
slirp/tcp_var.h
target/i386/svm.h
target/sparc/asi.h
target/xtensa/core-dc232b/xtensa-modules.inc.c
target/xtensa/core-dc233c/xtensa-modules.inc.c
target/xtensa/core-de212/core-isa.h
target/xtensa/core-de212/xtensa-modules.inc.c
target/xtensa/core-fsf/xtensa-modules.inc.c
target/xtensa/core-sample_controller/core-isa.h
target/xtensa/core-sample_controller/xtensa-modules.inc.c
target/xtensa/core-test_kc705_be/core-isa.h
target/xtensa/core-test_kc705_be/xtensa-modules.inc.c
tests/tcg/cris/check_abs.c
tests/tcg/cris/check_addc.c
tests/tcg/cris/check_addcm.c
tests/tcg/cris/check_addoq.c
tests/tcg/cris/check_bound.c
tests/tcg/cris/check_ftag.c
tests/tcg/cris/check_int64.c
tests/tcg/cris/check_lz.c
tests/tcg/cris/check_openpf5.c
tests/tcg/cris/check_sigalrm.c
tests/tcg/cris/crisutils.h
tests/tcg/cris/sys.c
tests/tcg/i386/test-i386-ssse3.c
ui/vgafont.h
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20181213223737.11793-3-pbonzini@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Acked-by: Eric Blake <eblake@redhat.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Stefan Markovic <smarkovic@wavecomp.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most list head structs need not be given a name. In most cases the
name is given just in case one is going to use QTAILQ_LAST, QTAILQ_PREV
or reverse iteration, but this does not apply to lists of other kinds,
and even for QTAILQ in practice this is only rarely needed. In addition,
we will soon reimplement those macros completely so that they do not
need a name for the head struct. So clean up everything, not giving a
name except in the rare case where it is necessary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
COLO uses a worker context (iothread) to drive the chardev. All
backends are not able to switch the context, let's report an error in
this case.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181205203737.9011-6-marcandre.lureau@redhat.com>
Reviewed-by: Li Zhijian <lizhiian@cn.fujitsu.com>
Reviewed-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
If we want to qtest through hub, it would be much more simpler and
safer to configure the hub without host network. So silent this
warnings for qtest.
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-3-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
We try to detect and drop too large packet (>INT_MAX) in 1592a99470
("net: ignore packet size greater than INT_MAX") during packet
delivering. Unfortunately, this is not sufficient as we may hit
another integer overflow when trying to queue such large packet in
qemu_net_queue_append_iov():
- size of the allocation may overflow on 32bit
- packet->size is integer which may overflow even on 64bit
Fixing this by moving the check to qemu_sendv_packet_async() which is
the entrance of all networking codes and reduce the limit to
NET_BUFSIZE to be more conservative. This works since:
- For the callers that call qemu_sendv_packet_async() directly, they
only care about if zero is returned to determine whether to prevent
the source from producing more packets. A callback will be triggered
if peer can accept more then source could be enabled. This is
usually used by high speed networking implementation like virtio-net
or netmap.
- For the callers that call qemu_sendv_packet() that calls
qemu_sendv_packet_async() indirectly, they often ignore the return
value. In this case qemu will just the drop packets if peer can't
receive.
Qemu will copy the packet if it was queued. So it was safe for both
kinds of the callers to assume the packet was sent.
Since we move the check from qemu_deliver_packet_iov() to
qemu_sendv_packet_async(), it would be safer to make
qemu_deliver_packet_iov() static to prevent any external user in the
future.
This is a revised patch of CVE-2018-17963.
Cc: qemu-stable@nongnu.org
Cc: Li Qiang <liq3ea@163.com>
Fixes: 1592a99470 ("net: ignore packet size greater than INT_MAX")
Reported-by: Li Qiang <liq3ea@gmail.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20181204035347.6148-2-jasowang@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The original code just follow the TCP state diagram,
but in this case, we can skip the TCPS_TIME_WAIT state to simplify
the implementation.
Signed-off-by: Zhang Chen <zhangckid@gmail.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
-----BEGIN PGP SIGNATURE-----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=kPZX
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' into staging
Error reporting patches for 2018-10-22
# gpg: Signature made Mon 22 Oct 2018 13:20:23 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>"
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>"
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-2018-10-22: (40 commits)
error: Drop bogus "use error_setg() instead" admonitions
vpc: Fail open on bad header checksum
block: Clean up bdrv_img_create()'s error reporting
vl: Simplify call of parse_name()
vl: Fix exit status for -drive format=help
blockdev: Convert drive_new() to Error
vl: Assert drive_new() does not fail in default_drive()
fsdev: Clean up error reporting in qemu_fsdev_add()
spice: Clean up error reporting in add_channel()
tpm: Clean up error reporting in tpm_init_tpmdev()
numa: Clean up error reporting in parse_numa()
vnc: Clean up error reporting in vnc_init_func()
ui: Convert vnc_display_init(), init_keyboard_layout() to Error
ui/keymaps: Fix handling of erroneous include files
vl: Clean up error reporting in device_init_func()
vl: Clean up error reporting in parse_fw_cfg()
vl: Clean up error reporting in mon_init_func()
vl: Clean up error reporting in machine_set_property()
vl: Clean up error reporting in chardev_init_func()
qom: Clean up error reporting in user_creatable_add_opts_foreach()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This new usernet option can be used to add data for option 66 (tftp
server name) in the BOOTP reply, which is useful in PXE based automatic
OS install such as OpenBSD.
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Tested-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>