Commit graph

337 commits

Author SHA1 Message Date
Luiz Capitulino 47116d1c90 QMP: Don't leak on connection close
QMP's chardev event callback doesn't call
json_message_parser_destroy() on CHR_EVENT_CLOSED. As the call
to json_message_parser_init() on CHR_EVENT_OPENED allocates memory,
we'are leaking on close.

Fix that by just calling json_message_parser_destroy() on
CHR_EVENT_CLOSED.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 13:46:17 -06:00
Luiz Capitulino 27a749fb73 QError: Don't abort on multiple faults
Ideally, Monitor code should report an error only once and
return the error information up the call chain.

To assure that this happens as expected and that no error is
lost, we have an assert() in qemu_error_internal().

However, we still have not fully converted handlers using
monitor_printf() to report errors. As there can be multiple
monitor_printf() calls on an error, the assertion is easily
triggered when debugging is enabled; and we will get a memory
leak if it's not.

The solution to this problem is to allow multiple faults by only
reporting the first one, and to release the additional error objects.

A better mechanism to report multiple errors to programmers is
underway.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 13:46:17 -06:00
Luiz Capitulino ba14414174 Monitor: remove unneeded checks
It's not needed to check the return of qobject_from_jsonf()
anymore, as an assert() has been added there.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 13:46:17 -06:00
Luiz Capitulino 09069b19f4 QMP: Enforce capability negotiation rules
With this commit QMP will be started in Capabilities Negotiation
mode, where the only command allowed to run is 'qmp_capabilities'.

All other commands will return CommandNotFound error. Asynchronous
messages are not delivered either.

When 'qmp_capabilities' is successfully executed QMP enters in
Command mode, where all commands (except 'qmp_capabilities') are
allowed to run and asynchronous messages are delivered.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 12:46:05 -06:00
Luiz Capitulino 4a7e1190df QMP: Introduce the qmp_capabilities command
This command will be used to enable QMP capabilities advertised
by the capabilities array.

Note that it will be mandatory to issue this command in order
to make QMP functional (although this behavior is not being
enforced by this commit).

Also, as we don't have any capabilities yet, the new command
doesn't accept any arguments. I will postpone the decision for
a format for this until we get our first capability.

Finally, this command is visible from the user Monitor too, in
the meaning that you can execute it but it won't do anything.
Making it only visible in QMP is beyond this series' goal, as
it requires changes in unrelated places.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 12:46:05 -06:00
Luiz Capitulino ca9567e234 QMP: Add QEMU's version to the greeting message
With capability negotiation support clients will only have a chance
to check QEMU's version (ie. issue 'query-version') after the
negotiation procedure is done.

It might be useful to clients to check QEMU's version before
negotiating features, though.

To allow that, this commit adds the QEMU's version object to the
greeting message.

Not really sure this is needed, but doesn't hurt anyway.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 12:46:05 -06:00
Luiz Capitulino aa1db6edaf QMP: BLOCK_IO_ERROR event handling
This commit adds the basic definitions for the BLOCK_IO_ERROR
event, but actual event emission will be introduced by the
next commits.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-10 11:57:02 -06:00
Markus Armbruster cc0c4185e5 monitor: Use QERR_INVALID_PARAMETER instead of QERR_INVALID_CPU_INDEX
This changes the error message from "Invalid CPU index" to "Invalid
parameter index" in the human monitor.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03 12:39:01 -06:00
Markus Armbruster fccfb11e0d monitor: New argument type 'T'
This is a double value with optional suffixes ms, us, ns.  We'll need
this to get migrate_set_downtime() QMP-ready.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03 12:36:26 -06:00
Markus Armbruster 3350a4dd07 monitor: New argument type 'b'
This is a double value with optional suffixes G, g, M, m, K, k.  We'll
need this to get migrate_set_speed() QMP-ready.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03 12:36:26 -06:00
Markus Armbruster 9fec543fa6 monitor: Document argument type 'M'
Was forgotten in commit b6e098d7.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-03 12:36:25 -06:00
Luiz Capitulino 82617d7ce3 Monitor: Fix command execution regression
Function is_async_return() added by commit 940cc30d0d assumes
that 'data', which is returned by handlers, is always a QDict.

This is not true, as QLists can also be returned, in this case
we'll get a segfault.

Fix that by checking if 'data' is a QDict.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-28 19:09:44 +00:00
Adam Litke 625a5befc2 virtio: Add memory statistics reporting to the balloon driver
When using ballooning to manage overcommitted memory on a host, a system for
guests to communicate their memory usage to the host can provide information
that will minimize the impact of ballooning on the guests.  The current method
employs a daemon running in each guest that communicates memory statistics to a
host daemon at a specified time interval.  The host daemon aggregates this
information and inflates and/or deflates balloons according to the level of
host memory pressure.  This approach is effective but overly complex since a
daemon must be installed inside each guest and coordinated to communicate with
the host.  A simpler approach is to collect memory statistics in the virtio
balloon driver and communicate them directly to the hypervisor.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 17:08:03 -06:00
Adam Litke 940cc30d0d New API for asynchronous monitor commands
Qemu has a number of commands that can operate asynchronously (savevm, migrate,
etc) and it will be getting more.  For these commands, the user monitor needs
to be suspended, but QMP monitors could continue to to accept other commands.
This patch introduces a new command API that isolates the details of handling
different monitor types from the actual command execution.

A monitor command can use this API by implementing the mhandler.cmd_async
handler (or info_async if appropriate).  This function is responsible for
submitting the command and does not return any data although it may raise
errors.  When the command completes, the QMPCompletion callback should be
invoked with its opaque data and the command result.

The process for submitting and completing an asynchronous command is different
for QMP and user monitors.  A user monitor must be suspended at submit time and
resumed at completion time.  The user_print() function must be passed to the
QMPCompletion callback so the result can be displayed properly.  QMP monitors
are simpler.  No submit time setup is required.  When the command completes,
monitor_protocol_emitter() writes the result in JSON format.

This API can also be used to implement synchronous commands.  In this case, the
cmd_async handler should immediately call the QMPCompletion callback.  It is my
hope that this new interface will work for all commands, leading to a
drastically simplified monitor.c once all commands are ported.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 17:08:03 -06:00
Luiz Capitulino 163c8a59f6 PCI: Convert pci_info() to QObject
The returned QObject is a QList of all buses. Each bus is
represented by a QDict, which has a key with a QList of all
PCI devices attached to it. Each device is represented by
a QDict.

As has happended to other complex conversions, it's hard to
split this commit as part of it are new functions which are
called by each other.

IMPORTANT: support for printing PCI bridge attached devices
is NOT part of this commit, it's going to be added by the
next commit, as it's untested.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 15:42:02 -06:00
Kirill A. Shutemov 27e3ddd3e0 monitor.c: fix warnings with _FORTIFY_SOURCE
CC    i386-softmmu/monitor.o
cc1: warnings being treated as errors
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1318: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c: In function 'do_physical_memory_save':
/usr/src/RPM/BUILD/qemu-0.11.92/monitor.c:1345: error: ignoring return value of 'fwrite', declared with attribute warn_unused_result
make[1]: *** [monitor.o] Error 1

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 14:59:20 -06:00
Markus Armbruster 81a1b45ac7 monitor: convert do_cpu_set() to QObject, QError
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 14:55:11 -06:00
Markus Armbruster 95fada8c2c monitor: convert do_physical_memory_save() to QError
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 14:55:11 -06:00
Markus Armbruster c34ed28b6b monitor: convert do_memory_save() to QError
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 14:55:10 -06:00
Markus Armbruster 09b9418c6d monitor: Don't check for mon_get_cpu() failure
mon_get_cpu() can't return null pointer, because it passes its return
value to cpu_synchronize_state() first, which crashes if its argument
is null.

Remove the (pretty cheesy) handling of this non-existing error.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-26 14:55:10 -06:00
Luiz Capitulino 23fabed136 QMP: Fix asynchronous events delivery
Commit f039a563f2 introduces
a regression as monitor_protocol_event() will return in
the first user Monitor it finds in the QLIST_FOREACH()
loop.

The right thing to do is to only delivery an asynchronous
event if the 'mon' is a QMP Monitor.

The aforementioned commit was an early version, if it was
applied to stable (it should) this one has to be applied
there too.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20 08:25:23 -06:00
Naphtali Sprei f5edb014ed Clean-up a little bit the RW related bits of BDRV_O_FLAGS. BDRV_O_RDONLY gone (and so is BDRV_O_ACCESS). Default value for bdrv_flags (0/zero) is READ-ONLY. Need to explicitly request READ-WRITE.
Instead of using the field 'readonly' of the BlockDriverState struct for passing the request,
pass the request in the flags parameter to the function.

Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-20 08:25:22 -06:00
Adam Litke f039a563f2 QMP: Emit asynchronous events on all QMP monitors
When using a control/QMP monitor in tandem with a regular monitor, asynchronous
messages can get lost depending on the order of the QEMU program arguments.
QEMU events issued by monitor_protocol_event() always go to cur_mon.  If the
user monitor was specified on the command line first (or it has ,default), the
message will be directed to the user monitor (not the QMP monitor).
Additionally, only one QMP session is currently able to receive async messages.

To avoid this confusion, scan through the list of monitors and emit the message
on each QMP monitor.

Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19 16:31:04 -06:00
Luiz Capitulino 0d2ed46af4 QMP: Introduce VNC_INITIALIZED event
It's emitted when a VNC client session is activated by QEMU,
client's information such as port, IP and auth ID (if the
session is authenticated) are provided.

Event example:

{ "event": "VNC_INITIALIZED",
    "timestamp": {"seconds": 1263475302, "microseconds": 150772},
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0"},
        "client": { "family": "ipv4", "service": "46089",
                    "host": "127.0.0.1", "sasl_username": "lcapitulino" } } }

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19 16:31:04 -06:00
Luiz Capitulino 0d72f3d31b QMP: Introduce VNC_DISCONNECTED event
It's emitted when a VNC client disconnects from QEMU, client's
information such as port and IP address are provided.

Event example:

{ "event": "VNC_DISCONNECTED",
    "timestamp": { "seconds": 1262976601, "microseconds": 975795 },
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0" },
        "client": { "family": "ipv4", "service": "58425",
                    "host": "127.0.0.1", "sasl_username": "foo" } } }

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19 16:31:03 -06:00
Luiz Capitulino 586153d952 QMP: Introduce VNC_CONNECTED event
It's emitted when a VNC client connects to QEMU, client's information
such as port and IP address are provided.

Note that this event is emitted right when the connection is
established. This means that it happens before authentication
procedure and session initialization.

Event example:

{ "event": "VNC_CONNECTED",
    "timestamp": { "seconds": 1262976601, "microseconds": 975795 },
    "data": {
        "server": { "auth": "sasl", "family": "ipv4",
                    "service": "5901", "host": "0.0.0.0" },
        "client": { "family": "ipv4", "service": "58425",
                    "host": "127.0.0.1" } } }

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-19 16:31:03 -06:00
Blue Swirl 23842aabe6 monitor: fix dead assignment spotted by clang
Value stored to 'nb_per_line' is never read.

Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-01-12 20:27:43 +00:00
Luiz Capitulino 3d72f9a2be QMP: Don't free async event's 'data'
The monitor_protocol_event() function will free the
event's data, this is wrong as 'data' management is up
to the caller.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-12 13:24:52 -06:00
Luiz Capitulino 810f49b56a QMP: Drop wrong assert()
Some commands return a QList of QDicts, which is valid,
but will trig the assert().

Just drop it.

Reported-by: Nathan Baum <nathan@parenthephobia.org.uk>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-08 09:58:40 -06:00
Luiz Capitulino 3b0bd6ec5b monitor: do_balloon(): Use 'M' argument type
This makes do_balloon() accept megabyte values from the user
Monitor while accepting byte values for QMP.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-19 08:26:03 -06:00
Luiz Capitulino b6e098d79f monitor: Introduce 'M' argument type
This is a target long value in megabytes which should be
converted to bytes.

It will be used by handlers which accept a megabyte value
when in "user mode".

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-19 08:26:03 -06:00
Luiz Capitulino 3661d51e8d QMP: Assure that returned data is a QDict
This is for debug purposes only.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-19 08:26:02 -06:00
Luiz Capitulino 0abc657914 QMP: Return an empty dict by default
Currently, when a regular command doesn't have any data to output,
QMP will emit:

{ "return": "OK" }

Returning an empty dict is better though, because dicts can support
some protocol changes in a compatible way.

So, with this commit we will return:

{ "return": {} }

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-19 08:26:02 -06:00
Luiz Capitulino 43e713ce93 QMP: Only handle converted commands
Looks like I dropped this check when addressing the 'query-'
commands request.

QMP should only handle converted commands, obviously.

Reported-by: Markus Armbruster <armbru@redhat.com>

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-19 08:26:01 -06:00
Jan Kiszka c62313bbdc monitor: Accept input only byte-wise
This allows to suspend command interpretation and execution
synchronously, e.g. during migration.

Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:33 -06:00
Luiz Capitulino 2daa119126 monitor: Catch printing to non-existent monitor
The monitor_vprintf() function now touches the 'mon' pointer
before calling monitor_puts(), this causes block migration
to segfault as its functions call monitor_printf() with a
NULL 'mon'.

To fix the problem this commit moves the 'mon' NULL check
from monitor_puts() to monitor_vprintf().

This can potentially hide bugs, but for some reason this has
been the behavior for a long time.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:27 -06:00
Luiz Capitulino 183e6e5257 monitor: Avoid readline functions in QMP
The monitor_read_command() function is readline specific
and should only be used when readline is available.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:27 -06:00
Luiz Capitulino cfdf2c4057 monitor: do_balloon(): Check for errors
do_balloon() should check for ballooning availability as
do_info_balloon() does.

Noted by Daniel P. Berrange <berrange@redhat.com>.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:27 -06:00
Luiz Capitulino 78d714e08f monitor: Use 'device' in eject
Monitor's eject command uses 'filename' for the device name
argument, but 'device' is a better name.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18 11:26:27 -06:00
Luiz Capitulino d96fd29cca VNC: Convert do_info_vnc() to QObject
Return a QDict with server information. Connected clients are returned
as a QList of QDicts.

The new functions (vnc_qdict_remote_addr(), vnc_qdict_local_addr() and
put_addr_qdict()) are used to insert 'host' and 'service' information
in the returned QDict.

This patch is big, but I don't see how to split it.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:49 -06:00
Luiz Capitulino 588b383201 char: Convert qemu_chr_info() to QObject
Each device is represented by a QDict. The returned QObject is a QList
of all devices.

This commit should not change user output.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:49 -06:00
Luiz Capitulino 218a536a7a block: Convert bdrv_info_stats() to QObject
Each device statistic information is stored in a QDict and
the returned QObject is a QList of all devices.

This commit should not change user output.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:49 -06:00
Luiz Capitulino d15e546567 block: Convert bdrv_info() to QObject
Each block device information is stored in a QDict and the
returned QObject is a QList of all devices.

This commit should not change user output.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:49 -06:00
Luiz Capitulino c86a668390 migration: Convert do_info_migrate() to QObject
Return a QDict, which may contain up to more two QDicts, depending
on the type of migration we're performing.

IMPORTANT: as a QInt stores a int64_t integer, RAM values are going
to be stored as int64_t and not as uint64_t as they are today. If
this is a problem QInt will have to be changed.

This commit should not change user output.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:49 -06:00
Luiz Capitulino e78c48ec4e monitor: Convert do_info_mice() to QObject
Each mouse is represented by a QDict, the returned QObject is a QList of
all mice.

This commit should not change user output.

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:49 -06:00
Luiz Capitulino 9603ceba2e monitor: Convert do_info_uuid() to QObject
snprintf() is used because the UUID_FMT is too complex for
qobject_from_jsonf().

Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:48 -06:00
Luiz Capitulino 14f0720df9 monitor: Convert do_info_hpet() to QObject
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:48 -06:00
Luiz Capitulino e05486cba6 monitor: Convert do_info_name() to QObject
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:48 -06:00
Luiz Capitulino 2af5ba712b monitor: Convert do_info_kvm() to QObject
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:48 -06:00
Luiz Capitulino c0e8520ed5 monitor: Convert do_info_status() to QObject
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12 07:59:48 -06:00