The Thumb CPS currently does not work correctly: CPSID touches more bits
than the instruction wants to, and CPSIE does nothing. Fix it by
passing the correct mask (the "affect" bits) and value.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Access the cp15.c13 TLS registers directly with TCG ops instead of with
a slow helper. If the the cp15 read/write was not TLS register access,
fall back to the cp15 helper.
This makes accessing __thread variables in linux-user when apps are compiled
with -mtp=cp15 possible. legal cp15 register to acces from linux-user are
already checked in cp15_user_ok.
While at it, make the cp15.c13 Thread ID registers available only on
ARMv6K and newer.
Signed-off-by: Riku Voipio <riku.voipio@nokia.com>
Shift by immediate value is incorrectly overwritten by a temporary
variable in the processing of NEON vsri, vshl and vsli instructions.
This patch has been revised to also include a fix for the special
case where the code would previously try to shift an integer value
over 31 bits left/right.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All other bits except for the EN in the VFP FPEXC register are defined
as subarchitecture specific and real functionality for any of the
other bits has not been implemented in QEMU. However, current code
allows modifying all bits in the VFP FPEXC register leading to
problems when guest code is writing 1's to the subarchitecture
specific bits and checking whether the bits stay up to verify the
existence of functionality which in fact does not exist in QEMU.
This patch has been revised to include the same behavior change in
the gdb register write function.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add support for NEON vld1.64 and vst1.64 instructions. This patch is
revised to follow more closely the specification and raises
undefined exception if 64bit element size is used for vld2/vst2 or
vld4/vst4 instructions.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In the existing code shift value is clobbered during the pass loop.
This patch changes the code so that it stores the intermediate
result in the target neon register directly and eliminates the need
to use a temporary to hold the intermediate value thus leaving the
shift value in the temporary variable intact. This is a new patch
in this version of the patch series.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
tmp4 and tmp5 temporary variables are allocated using tcg_const_i32
but incorrectly released using dead_tmp which will cause resource
leak tracking to report false leaks.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Current implementation of thumb mul instruction is implemented as a
32x32->64 multiply which then uses only 32 least significant bits of
the result. Replace that with a simple 32x32->32 multiply.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Revised patch for getting rid of tcg temporary variable leaks in
target-arm/translate.c. This version also includes the leak patch for
gen_set_cpsr macro, now converted as a static inline function, which I
sent earlier as a separate patch on top of this patch.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The goal is eventually to get rid of all cpu_T register usage and to use
just short-lived tmp/tmp2 registers. This patch converts all the places where
cpu_T was used in the Thumb code and replaces it with explicit TCG register
allocation.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Uninitialized register was used instead of proper TCG variable.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The neon_trn_u8, neon_trn_u16, neon_unzip_u8, neon_zip_u8 and neon_zip_u16
helpers used fixed registers to return values. This patch replaces that with
TCG code, so T0/T1 is no longer directly used by the helper functions.
Bugs in the gen_neon_unzip register load code were also fixed.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The encoding of 'IA' and 'DB' conditions was swapped.
SRS instruction must store banked SPSR instead of CPSR at the specific address.
Missing 'return' statement at the end of RFE handling.
Fixed write-back code to reference correct registers.
From: Hyeonsung Jang <hsjang@ok-labs.com>
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The temporary variable cache in no longer need since tcg_temp_free was introduced.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently each read/write of ARM register involves a LD/ST TCG operation. This
patch uses TCG memory-backed registers to represent the ARM register set. With
memory-backed registers the LD/ST operations are transparently generated by TCG
and host registers could be used to optimize the generated code.
Signed-off-by: Filip Navara <filip.navara@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Problem: Our file sys-queue.h is a copy of the BSD file, but there are
some additions and it's not entirely compatible. Because of that, there have
been conflicts with system headers on BSD systems. Some hacks have been
introduced in the commits 15cc923584,
f40d753718,
96555a96d7 and
3990d09adf but the fixes were fragile.
Solution: Avoid the conflict entirely by renaming the functions and the
file. Revert the previous hacks.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
ARMv7 defines a new behavior for ARM data processing instructions
compared to earlier architecture revisions; when the destination
register is R15, a Branch and Exchange operation is executed rather
than a simple Branch to the target address. This patch corrects the
behavior of the emulation for the aforementioned operations. To be
applied after applying the previous patch in this patch set.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Paul Brook <paul@codesourcery.com>
Modernize parts of target-arm/translate.c in preparation for the
modifications in the subsequent patch in this patch set. This is done
in order to avoid writing new code to target-arm/translate.c that
would use deprecated methods and/or variables.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Signed-off-by: Paul Brook <paul@codesourcery.com>
This replaces a compile time option for some targets and adds
this feature to targets which did not have a compile time option.
Add monitor command to enable or disable single step mode.
Modify monitor command "info status" to display single step mode.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7004 c046a42c-6fe2-441c-8c8c-71466251a162
Rename bswap_i32 into bswap32_i32 and bswap_i64 into bswap64_i64
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6829 c046a42c-6fe2-441c-8c8c-71466251a162
These are references to 'loglevel' that aren't on a simple 'if (loglevel &
X) qemu_log()' statement.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6340 c046a42c-6fe2-441c-8c8c-71466251a162
This is a large patch that changes all occurrences of logfile/loglevel
global variables to use the new qemu_log*() macros.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
The attached patch updates the FSF address in the GPL/LGPL boilerplate
in most GPL/LGPLed files, and also in COPYING.LIB.
Signed-off-by: Stuart Brady <stuart.brady@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
EE state, just the associated system coprocessor registers. It is sufficient
to keep OS setup and context switching code happy.
Signed-off-by: Paul Brook <paul@codesourcery.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6104 c046a42c-6fe2-441c-8c8c-71466251a162
This fixes the destination and accumulator registers for the smmul
and smmla instructions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Acked-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5913 c046a42c-6fe2-441c-8c8c-71466251a162
This fixes the destination and accumulator registers for the usad8
and usada8 instructions.
Signed-off-by: Mans Rullgard <mans@mansr.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5912 c046a42c-6fe2-441c-8c8c-71466251a162
- gen_set_CF_bit31: use the right value to set carry flag
- shifter_out_im: remove a spurious semi-colon
- add a break for VSHRN, VRSHRN, VQSHRN, VQRSHRN
size 2 case
- sbfx, ubfx are v6t2 instructions
The correct cps user mode behaviour is unclear so it's left out from the
commit until ARM decides it.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5908 c046a42c-6fe2-441c-8c8c-71466251a162
- remove macros that are not used
- remove disass structure is_mem field which value is never used
- correct a typo in a comment.
Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5907 c046a42c-6fe2-441c-8c8c-71466251a162
This switches cpu_break/watchpoint_* to TAILQ wrappers, simplifying the
code and also fixing a use after release issue in
cpu_break/watchpoint_remove_all.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5799 c046a42c-6fe2-441c-8c8c-71466251a162
Now that we can properly restore the pc on watchpoint hits, there is no
more need for prematurely terminating TBs if watchpoints are present.
Remove all related bits.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5742 c046a42c-6fe2-441c-8c8c-71466251a162
This patch prepares the QEMU cpu_watchpoint/breakpoint API to allow the
succeeding enhancements this series comes with.
First of all, it overcomes MAX_BREAKPOINTS/MAX_WATCHPOINTS by switching
to dynamically allocated data structures that are kept in linked lists.
This also allows to return a stable reference to the related objects,
required for later introduced x86 debug register support.
Breakpoints and watchpoints are stored with their full information set
and an additional flag field that makes them easily extensible for use
beyond pure guest debugging.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5738 c046a42c-6fe2-441c-8c8c-71466251a162
According to ARM Reference Manual (DDI0100 A4.1.16),
bit 5 is fixed to 0 (bit 4 is the MSB of the mode), so the instruction mask
should be 0x0ff10020 not 0x0ff10010.
Besides, mmod flag is bit 17 (b14 is SBZ)
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4899 c046a42c-6fe2-441c-8c8c-71466251a162
helper.c
- copy reference c0_c2 to runtime c0_c2 and not c0_c1
op_helper.c
- remove old code (PARAM1, probably some left over from old dyngen)
that broke do_[us]sat
translate.c
- gen_smul_dual should sign-extend from 16 bit to 32 bit and not from
8 to 32
- disas_arm_insn:
* smlalxy: that was completely wrong; now the addition is
performed as for smlald
* pkhtb: optional ASR not taken into account (similar
* to [us]sat)
* pkhtb/pkhbt: tmp2 is dead
* smlald, smlsld, smuad, smusd, smlad, smlsd: rd
* and rn swapped
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4898 c046a42c-6fe2-441c-8c8c-71466251a162
The fconst change is partly a guess.
VFP_OP1 is still unused.
An ARMv6 target still won't boot.
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4210 c046a42c-6fe2-441c-8c8c-71466251a162