We've currently got 18 architectures in QEMU, and thus 18 target-xxx
folders in the root folder of the QEMU source tree. More architectures
(e.g. RISC-V, AVR) are likely to be included soon, too, so the main
folder of the QEMU sources slowly gets quite overcrowded with the
target-xxx folders.
To disburden the main folder a little bit, let's move the target-xxx
folders into a dedicated target/ folder, so that target-xxx/ simply
becomes target/xxx/ instead.
Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part]
Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part]
Acked-by: Michael Walle <michael@walle.cc> [lm32 part]
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part]
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part]
Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part]
Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part]
Acked-by: Richard Henderson <rth@twiddle.net> [alpha part]
Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part]
Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part]
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [crisµblaze part]
Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Several helpers call helper_raise_exception directly, which requires
in turn that their callers have performed save_state. The new function
allows a TCG return address to be passed in so that we can restore
PC + NPC + flags data from that.
This fixes a bug in the usage of helper_check_align, whose callers had
not been calling save_state. It fixes another bug in which the divide
helpers used GETPC at a level other than the direct callee from TCG.
This allows the translator to avoid save_state prior to SAVE, RESTORE,
and FLUSHW instructions.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1453832250-766-7-git-send-email-peter.maydell@linaro.org
If the NPT bit is set in the timer register, all non-supervisor read accesses
to the register should fail with a privilege exception.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-By: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h. This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The signed integer division -0x8000_0000_0000_0000 / -1 must be handled
separately to avoid an overflow on the QEMU host.
Negative overflow must be a negative number for correct sign
extension in Sparc64 mode. Use <stdint.h> constants.
Signed-off-by: Olivier Danet <odanet@caramail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Both fields are used in VMState, thus need to be moved together.
Explicitly zero them on reset since they were located before
breakpoints.
Pass PowerPCCPU to kvmppc_handle_halt().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Refactor common code around calls to cpu_restore_state().
tb_find_pc() has now no external users, make it static.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The branches around the exception are maintaining an otherwise
unnecessary use of local temps for the cpu destination.
Note that gen_op_t{add,sub}_cc were identical to gen_op_{add,sub}_cc.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The branches around the exception are maintaining an otherwise
unnecessary use of local temps for the cpu destination.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Scripted conversion:
sed -i "s/CPUState/CPUSPARCState/g" target-sparc/*.[hc]
sed -i "s/#define CPUSPARCState/#define CPUState/" target-sparc/cpu.h
Signed-off-by: Andreas Färber <afaerber@suse.de>
Acked-by: Anthony Liguori <aliguori@us.ibm.com>
This patch replace the previous implementation with this simplified and
more complete version (no shutdown when psret == 1).
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Before the next patch, fix coding style of the areas affected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make [su]div{,cc} helpers take a parameter for CPUState instead
of relying on global env. Move the functions to helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Make raise_exception() and helper_debug() take a parameter for
CPUState instead of relying on global env. Move the functions
to helper.c.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
These functions don't need access to CPUState or already pass it,
so relocating them from op_helper.c to helper.c and int64_helper.c
is trivial.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move CPU init to cpu_init.c and interrupt handling to int32_helper.c
for Sparc32 and int64_helper.c for Sparc64.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Before the next patch, fix coding style of the areas affected.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Gdb expects all registers windows to be flushed in ram, which is not the case
in Qemu. Therefore the back-trace generation doesn't work. This patch adds a
function to handle reads (and only read) in stack frames as if windows were
flushed.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This change is needed because commit 06e12b65
now uses an unsigned long long value
(uint64_t && unsigned long long => unsigned long long).
Cc: Tsuneo Saito <tsnsaito@gmail.com>
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch implements MMU faults caused by TTE.NFO and TTE.E:
- access other than nonfaulting load to a page marked NFO should
raise data_access_exception
- nonfaulting load to a page marked with E bit should raise
data_access_exception
To distinguish nonfaulting loads, this patch extends (abuses?) the rw
argument of get_physical_address_data(). rw is set to 4 on nonfaulting
loads.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
cpu_get_phys_page_nofault() calls get_physical_address() twice,
that results in overwriting the fault status in the SFSR.
We need this change in order for nonfaulting loads to raising MMU faults
as normal loads do.
Also removed the call to cpu_get_physical_page_desc() since we are
going to modify nonfaulting loads raising MMU faults.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch makes cpu_get_phys_page_debug() independent from
cpu_get_phys_page_nofault() in advance of implementing nonfaulting load.
This also modifies cpu_get_phys_page_nofault() to be compiled only on
TARGET_SPARC64 because it is not required on SPARC32.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Introduce cpu_sparc_get_phys_page() to be used as a help for splitting
cpu_get_phys_page_debug() from cpu_get_phys_page_nofault().
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add macros for SFSR fields and use macros instead of magic numbers.
Also fix the update of the register fields on MMU faults.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Add macros for TTE bits and modify to use macros instead of
magic numbers.
Signed-off-by: Tsuneo Saito <tsnsaito@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
do_interrupt() was mixing CPUState pointer passed from caller
and global env (AREG0).
Fix by moving the function to helper.c. Introduce a helper for calling
change_pstate() safely from outside of execution context.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This patch removes all references to signal.h when qemu-common.h is included
as they become redundant.
Signed-off-by: Alexandre Raymond <cerbere@gmail.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
The "leon3_cache_control_int" (op_helper.c) function is called within leon3.c
which leads to segfault error with the global "env".
Now cache control is a CPU feature and everything is handled in op_helper.c.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This register is activated by CPU_FEATURE_ASR17 in the feature field.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more
information on http://www.gaisler.com).
Leon3 is made of multiple components available in the GrLib VHDL library.
Three devices are implemented: uart, timers and IRQ manager.
You can find code for these peripherals in the grlib_* files.
Signed-off-by: Fabien Chouteau <chouteau@adacore.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- set mmu tag access register on FAULT and PROT traps as well
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- cpu_mmu_index return MMU_NUCLEUS_IDX if trap level is not zero
- cpu_get_tb_cpu_state: store trap level and primary context in flags
this allows to restart code translation when address translation is changed
- stop translation block after writing to pstate and tl registers
- stop translation block after writing to alternate space
this can be optimized to stop only if address translation can be changed
by write operation (e.g. by comparing with MMU ASI values)
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- refactor code to handle hpstate only if available for current cpu
- conditionally set hypervisor bit in hpstate register
- reorder softmmu indices so user accessable ones go first, translation context
macros supervisor() and hypervisor() adjusted as well
- disable sparcv8 registers for TARGET_SPARC64
- fix cpu_mmu_index to use sparcv9 bits only
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
- separate PRIV and PROT handling
- DPRINTF_MMU macro to clean up debug code
- dump mmu_idx, trap level and mmu context registers
along with address translation values
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>