haraldwolff/qemu-patch-raspberry4
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
qemu-patch-raspberry4/pc-bios/s390-ccw/bootmap.c
Christian Borntraeger f2879a5c9e pc-bios/s390-ccw: store proper subsystem information word 
POP chapter 17 requires to store a subsystem information word at 184
during IPL. Furthermore bytes 188-191 should be zero. The bootmap might
contain data blocks that are written to the first page. We have to
write these values after we processed the bootmap and before the final
IPL.

Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-07-08 15:08:03 +02:00

473 lines
14 KiB
C
Raw Blame History

/*
* QEMU S390 bootmap interpreter
*
* Copyright (c) 2009 Alexander Graf <agraf@suse.de>
*
* This work is licensed under the terms of the GNU GPL, version 2 or (at
* your option) any later version. See the COPYING file in the top-level
* directory.
*/
#include "s390-ccw.h"
#include "bootmap.h"
#include "virtio.h"
#ifdef DEBUG
/* #define DEBUG_FALLBACK */
#endif
#ifdef DEBUG_FALLBACK
#define dputs(txt) \
do { sclp_print("zipl: " txt); } while (0)
#else
#define dputs(fmt, ...) \
do { } while (0)
#endif
/* Scratch space */
static uint8_t sec[MAX_SECTOR_SIZE*4] __attribute__((__aligned__(PAGE_SIZE)));
typedef struct ResetInfo {
uint32_t ipl_mask;
uint32_t ipl_addr;
uint32_t ipl_continue;
} ResetInfo;
ResetInfo save;
static void jump_to_IPL_2(void)
{
ResetInfo *current = 0;
void (*ipl)(void) = (void *) (uint64_t) current->ipl_continue;
debug_print_addr("set IPL addr to", ipl);
/* Ensure the guest output starts fresh */
sclp_print("\n");
*current = save;
ipl(); /* should not return */
}
static void jump_to_IPL_code(uint64_t address)
{
/* store the subsystem information _after_ the bootmap was loaded */
write_subsystem_identification();
/*
* The IPL PSW is at address 0. We also must not overwrite the
* content of non-BIOS memory after we loaded the guest, so we
* save the original content and restore it in jump_to_IPL_2.
*/
ResetInfo *current = 0;
save = *current;
current->ipl_addr = (uint32_t) (uint64_t) &jump_to_IPL_2;
current->ipl_continue = address & 0x7fffffff;
/*
* HACK ALERT.
* We use the load normal reset to keep r15 unchanged. jump_to_IPL_2
* can then use r15 as its stack pointer.
*/
asm volatile("lghi 1,1\n\t"
"diag 1,1,0x308\n\t"
: : : "1", "memory");
virtio_panic("\n! IPL returns !\n");
}
/***********************************************************************
* IPL an ECKD DASD (CDL or LDL/CMS format)
*/
static unsigned char _bprs[8*1024]; /* guessed "max" ECKD sector size */
const int max_bprs_entries = sizeof(_bprs) / sizeof(ExtEckdBlockPtr);
static inline void verify_boot_info(BootInfo *bip)
{
IPL_assert(magic_match(bip->magic, ZIPL_MAGIC), "No zIPL magic");
IPL_assert(bip->version == BOOT_INFO_VERSION, "Wrong zIPL version");
IPL_assert(bip->bp_type == BOOT_INFO_BP_TYPE_IPL, "DASD is not for IPL");
IPL_assert(bip->dev_type == BOOT_INFO_DEV_TYPE_ECKD, "DASD is not ECKD");
IPL_assert(bip->flags == BOOT_INFO_FLAGS_ARCH, "Not for this arch");
IPL_assert(block_size_ok(bip->bp.ipl.bm_ptr.eckd.bptr.size),
"Bad block size in zIPL section of the 1st record.");
}
static bool eckd_valid_address(BootMapPointer *p)
{
const uint64_t cylinder = p->eckd.cylinder
+ ((p->eckd.head & 0xfff0) << 12);
const uint64_t head = p->eckd.head & 0x000f;
if (head >= virtio_get_heads()
|| p->eckd.sector > virtio_get_sectors()
|| p->eckd.sector <= 0) {
return false;
}
if (!virtio_guessed_disk_nature() && cylinder >= virtio_get_cylinders()) {
return false;
}
return true;
}
static block_number_t eckd_block_num(BootMapPointer *p)
{
const uint64_t sectors = virtio_get_sectors();
const uint64_t heads = virtio_get_heads();
const uint64_t cylinder = p->eckd.cylinder
+ ((p->eckd.head & 0xfff0) << 12);
const uint64_t head = p->eckd.head & 0x000f;
const block_number_t block = sectors * heads * cylinder
+ sectors * head
+ p->eckd.sector
- 1; /* block nr starts with zero */
return block;
}
static block_number_t load_eckd_segments(block_number_t blk, uint64_t *address)
{
block_number_t block_nr;
int j, rc;
BootMapPointer *bprs = (void *)_bprs;
bool more_data;
memset(_bprs, FREE_SPACE_FILLER, sizeof(_bprs));
read_block(blk, bprs, "BPRS read failed");
do {
more_data = false;
for (j = 0;; j++) {
block_nr = eckd_block_num((void *)&(bprs[j].xeckd));
if (is_null_block_number(block_nr)) { /* end of chunk */
break;
}
/* we need the updated blockno for the next indirect entry
* in the chain, but don't want to advance address
*/
if (j == (max_bprs_entries - 1)) {
break;
}
IPL_assert(block_size_ok(bprs[j].xeckd.bptr.size),
"bad chunk block size");
IPL_assert(eckd_valid_address(&bprs[j]), "bad chunk ECKD addr");
if ((bprs[j].xeckd.bptr.count == 0) && unused_space(&(bprs[j+1]),
sizeof(EckdBlockPtr))) {
/* This is a "continue" pointer.
* This ptr should be the last one in the current
* script section.
* I.e. the next ptr must point to the unused memory area
*/
memset(_bprs, FREE_SPACE_FILLER, sizeof(_bprs));
read_block(block_nr, bprs, "BPRS continuation read failed");
more_data = true;
break;
}
/* Load (count+1) blocks of code at (block_nr)
* to memory (address).
*/
rc = virtio_read_many(block_nr, (void *)(*address),
bprs[j].xeckd.bptr.count+1);
IPL_assert(rc == 0, "code chunk read failed");
*address += (bprs[j].xeckd.bptr.count+1) * virtio_get_block_size();
}
} while (more_data);
return block_nr;
}
static void run_eckd_boot_script(block_number_t mbr_block_nr)
{
int i;
block_number_t block_nr;
uint64_t address;
ScsiMbr *scsi_mbr = (void *)sec;
BootMapScript *bms = (void *)sec;
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
read_block(mbr_block_nr, sec, "Cannot read MBR");
block_nr = eckd_block_num((void *)&(scsi_mbr->blockptr));
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
read_block(block_nr, sec, "Cannot read Boot Map Script");
for (i = 0; bms->entry[i].type == BOOT_SCRIPT_LOAD; i++) {
address = bms->entry[i].address.load_address;
block_nr = eckd_block_num(&(bms->entry[i].blkptr));
do {
block_nr = load_eckd_segments(block_nr, &address);
} while (block_nr != -1);
}
IPL_assert(bms->entry[i].type == BOOT_SCRIPT_EXEC,
"Unknown script entry type");
jump_to_IPL_code(bms->entry[i].address.load_address); /* no return */
}
static void ipl_eckd_cdl(void)
{
XEckdMbr *mbr;
Ipl2 *ipl2 = (void *)sec;
IplVolumeLabel *vlbl = (void *)sec;
block_number_t block_nr;
/* we have just read the block #0 and recognized it as "IPL1" */
sclp_print("CDL\n");
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
read_block(1, ipl2, "Cannot read IPL2 record at block 1");
IPL_assert(magic_match(ipl2, IPL2_MAGIC), "No IPL2 record");
mbr = &ipl2->u.x.mbr;
IPL_assert(magic_match(mbr, ZIPL_MAGIC), "No zIPL section in IPL2 record.");
IPL_assert(block_size_ok(mbr->blockptr.xeckd.bptr.size),
"Bad block size in zIPL section of IPL2 record.");
IPL_assert(mbr->dev_type == DEV_TYPE_ECKD,
"Non-ECKD device type in zIPL section of IPL2 record.");
/* save pointer to Boot Script */
block_nr = eckd_block_num((void *)&(mbr->blockptr));
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
read_block(2, vlbl, "Cannot read Volume Label at block 2");
IPL_assert(magic_match(vlbl->key, VOL1_MAGIC),
"Invalid magic of volume label block");
IPL_assert(magic_match(vlbl->f.key, VOL1_MAGIC),
"Invalid magic of volser block");
print_volser(vlbl->f.volser);
run_eckd_boot_script(block_nr);
/* no return */
}
static void ipl_eckd_ldl(ECKD_IPL_mode_t mode)
{
LDL_VTOC *vlbl = (void *)sec; /* already read, 3rd block */
char msg[4] = { '?', '.', '\n', '\0' };
block_number_t block_nr;
BootInfo *bip;
sclp_print((mode == ECKD_CMS) ? "CMS" : "LDL");
sclp_print(" version ");
switch (vlbl->LDL_version) {
case LDL1_VERSION:
msg[0] = '1';
break;
case LDL2_VERSION:
msg[0] = '2';
break;
default:
msg[0] = vlbl->LDL_version;
msg[0] &= 0x0f; /* convert EBCDIC */
msg[0] |= 0x30; /* to ASCII (digit) */
msg[1] = '?';
break;
}
sclp_print(msg);
print_volser(vlbl->volser);
/* DO NOT read BootMap pointer (only one, xECKD) at block #2 */
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
read_block(0, sec, "Cannot read block 0");
bip = (void *)(sec + 0x70); /* "boot info" is "eckd mbr" for LDL */
verify_boot_info(bip);
block_nr = eckd_block_num((void *)&(bip->bp.ipl.bm_ptr.eckd.bptr));
run_eckd_boot_script(block_nr);
/* no return */
}
static void ipl_eckd(ECKD_IPL_mode_t mode)
{
switch (mode) {
case ECKD_CDL:
ipl_eckd_cdl(); /* no return */
case ECKD_CMS:
case ECKD_LDL:
ipl_eckd_ldl(mode); /* no return */
default:
virtio_panic("\n! Unknown ECKD IPL mode !\n");
}
}
/***********************************************************************
* IPL a SCSI disk
*/
static void zipl_load_segment(ComponentEntry *entry)
{
const int max_entries = (MAX_SECTOR_SIZE / sizeof(ScsiBlockPtr));
ScsiBlockPtr *bprs = (void *)sec;
const int bprs_size = sizeof(sec);
block_number_t blockno;
uint64_t address;
int i;
char err_msg[] = "zIPL failed to read BPRS at 0xZZZZZZZZZZZZZZZZ";
char *blk_no = &err_msg[30]; /* where to print blockno in (those ZZs) */
blockno = entry->data.blockno;
address = entry->load_address;
debug_print_int("loading segment at block", blockno);
debug_print_int("addr", address);
do {
memset(bprs, FREE_SPACE_FILLER, bprs_size);
fill_hex_val(blk_no, &blockno, sizeof(blockno));
read_block(blockno, bprs, err_msg);
for (i = 0;; i++) {
uint64_t *cur_desc = (void *)&bprs[i];
blockno = bprs[i].blockno;
if (!blockno) {
break;
}
/* we need the updated blockno for the next indirect entry in the
chain, but don't want to advance address */
if (i == (max_entries - 1)) {
break;
}
if (bprs[i].blockct == 0 && unused_space(&bprs[i + 1],
sizeof(ScsiBlockPtr))) {
/* This is a "continue" pointer.
* This ptr is the last one in the current script section.
* I.e. the next ptr must point to the unused memory area.
* The blockno is not zero, so the upper loop must continue
* reading next section of BPRS.
*/
break;
}
address = virtio_load_direct(cur_desc[0], cur_desc[1], 0,
(void *)address);
IPL_assert(address != -1, "zIPL load segment failed");
}
} while (blockno);
}
/* Run a zipl program */
static void zipl_run(ScsiBlockPtr *pte)
{
ComponentHeader *header;
ComponentEntry *entry;
uint8_t tmp_sec[MAX_SECTOR_SIZE];
read_block(pte->blockno, tmp_sec, "Cannot read header");
header = (ComponentHeader *)tmp_sec;
IPL_assert(magic_match(tmp_sec, ZIPL_MAGIC), "No zIPL magic");
IPL_assert(header->type == ZIPL_COMP_HEADER_IPL, "Bad header type");
dputs("start loading images\n");
/* Load image(s) into RAM */
entry = (ComponentEntry *)(&header[1]);
while (entry->component_type == ZIPL_COMP_ENTRY_LOAD) {
zipl_load_segment(entry);
entry++;
IPL_assert((uint8_t *)(&entry[1]) <= (tmp_sec + MAX_SECTOR_SIZE),
"Wrong entry value");
}
IPL_assert(entry->component_type == ZIPL_COMP_ENTRY_EXEC, "No EXEC entry");
/* should not return */
jump_to_IPL_code(entry->load_address);
}
static void ipl_scsi(void)
{
ScsiMbr *mbr = (void *)sec;
uint8_t *ns, *ns_end;
int program_table_entries = 0;
const int pte_len = sizeof(ScsiBlockPtr);
ScsiBlockPtr *prog_table_entry;
/* The 0-th block (MBR) was already read into sec[] */
sclp_print("Using SCSI scheme.\n");
debug_print_int("program table", mbr->blockptr.blockno);
/* Parse the program table */
read_block(mbr->blockptr.blockno, sec,
"Error reading Program Table");
IPL_assert(magic_match(sec, ZIPL_MAGIC), "No zIPL magic");
ns_end = sec + virtio_get_block_size();
for (ns = (sec + pte_len); (ns + pte_len) < ns_end; ns++) {
prog_table_entry = (ScsiBlockPtr *)ns;
if (!prog_table_entry->blockno) {
break;
}
program_table_entries++;
}
debug_print_int("program table entries", program_table_entries);
IPL_assert(program_table_entries != 0, "Empty Program Table");
/* Run the default entry */
prog_table_entry = (ScsiBlockPtr *)(sec + pte_len);
zipl_run(prog_table_entry); /* no return */
}
/***********************************************************************
* IPL starts here
*/
void zipl_load(void)
{
ScsiMbr *mbr = (void *)sec;
LDL_VTOC *vlbl = (void *)sec;
/* Grab the MBR */
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
read_block(0, mbr, "Cannot read block 0");
dputs("checking magic\n");
if (magic_match(mbr->magic, ZIPL_MAGIC)) {
ipl_scsi(); /* no return */
}
/* We have failed to follow the SCSI scheme, so */
sclp_print("Using ECKD scheme.\n");
if (virtio_guessed_disk_nature()) {
sclp_print("Using guessed DASD geometry.\n");
virtio_assume_eckd();
}
if (magic_match(mbr->magic, IPL1_MAGIC)) {
ipl_eckd(ECKD_CDL); /* no return */
}
/* LDL/CMS? */
memset(sec, FREE_SPACE_FILLER, sizeof(sec));
read_block(2, vlbl, "Cannot read block 2");
if (magic_match(vlbl->magic, CMS1_MAGIC)) {
ipl_eckd(ECKD_CMS); /* no return */
}
if (magic_match(vlbl->magic, LNX1_MAGIC)) {
ipl_eckd(ECKD_LDL); /* no return */
}
virtio_panic("\n* invalid MBR magic *\n");
}
Reference in a new issue View git blame Copy permalink