haraldwolff/qemu-patch-raspberry4
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
qemu-patch-raspberry4/hw/ssi/aspeed_smc.c
Cédric Le Goater 087b57c993 aspeed/smc: adjust the size of the register region 
The SPI controller of the AST2400 SoC has less registers. So we can
adjust the size of the memory region holding the registers depending
on the controller type. We can also remove the guest_error logging
which is useless as the range of the region is strict enough.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 1483979087-32663-7-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-01-20 11:15:08 +00:00

713 lines
24 KiB
C
Raw Blame History

/*
* ASPEED AST2400 SMC Controller (SPI Flash Only)
*
* Copyright (C) 2016 IBM Corp.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "qemu/osdep.h"
#include "hw/sysbus.h"
#include "sysemu/sysemu.h"
#include "qemu/log.h"
#include "include/qemu/error-report.h"
#include "exec/address-spaces.h"
#include "hw/ssi/aspeed_smc.h"
/* CE Type Setting Register */
#define R_CONF (0x00 / 4)
#define CONF_LEGACY_DISABLE (1 << 31)
#define CONF_ENABLE_W4 20
#define CONF_ENABLE_W3 19
#define CONF_ENABLE_W2 18
#define CONF_ENABLE_W1 17
#define CONF_ENABLE_W0 16
#define CONF_FLASH_TYPE4 8
#define CONF_FLASH_TYPE3 6
#define CONF_FLASH_TYPE2 4
#define CONF_FLASH_TYPE1 2
#define CONF_FLASH_TYPE0 0
#define CONF_FLASH_TYPE_NOR 0x0
#define CONF_FLASH_TYPE_NAND 0x1
#define CONF_FLASH_TYPE_SPI 0x2
/* CE Control Register */
#define R_CE_CTRL (0x04 / 4)
#define CTRL_EXTENDED4 4 /* 32 bit addressing for SPI */
#define CTRL_EXTENDED3 3 /* 32 bit addressing for SPI */
#define CTRL_EXTENDED2 2 /* 32 bit addressing for SPI */
#define CTRL_EXTENDED1 1 /* 32 bit addressing for SPI */
#define CTRL_EXTENDED0 0 /* 32 bit addressing for SPI */
/* Interrupt Control and Status Register */
#define R_INTR_CTRL (0x08 / 4)
#define INTR_CTRL_DMA_STATUS (1 << 11)
#define INTR_CTRL_CMD_ABORT_STATUS (1 << 10)
#define INTR_CTRL_WRITE_PROTECT_STATUS (1 << 9)
#define INTR_CTRL_DMA_EN (1 << 3)
#define INTR_CTRL_CMD_ABORT_EN (1 << 2)
#define INTR_CTRL_WRITE_PROTECT_EN (1 << 1)
/* CEx Control Register */
#define R_CTRL0 (0x10 / 4)
#define CTRL_CMD_SHIFT 16
#define CTRL_CMD_MASK 0xff
#define CTRL_CE_STOP_ACTIVE (1 << 2)
#define CTRL_CMD_MODE_MASK 0x3
#define CTRL_READMODE 0x0
#define CTRL_FREADMODE 0x1
#define CTRL_WRITEMODE 0x2
#define CTRL_USERMODE 0x3
#define R_CTRL1 (0x14 / 4)
#define R_CTRL2 (0x18 / 4)
#define R_CTRL3 (0x1C / 4)
#define R_CTRL4 (0x20 / 4)
/* CEx Segment Address Register */
#define R_SEG_ADDR0 (0x30 / 4)
#define SEG_END_SHIFT 24 /* 8MB units */
#define SEG_END_MASK 0xff
#define SEG_START_SHIFT 16 /* address bit [A29-A23] */
#define SEG_START_MASK 0xff
#define R_SEG_ADDR1 (0x34 / 4)
#define R_SEG_ADDR2 (0x38 / 4)
#define R_SEG_ADDR3 (0x3C / 4)
#define R_SEG_ADDR4 (0x40 / 4)
/* Misc Control Register #1 */
#define R_MISC_CTRL1 (0x50 / 4)
/* Misc Control Register #2 */
#define R_MISC_CTRL2 (0x54 / 4)
/* DMA Control/Status Register */
#define R_DMA_CTRL (0x80 / 4)
#define DMA_CTRL_DELAY_MASK 0xf
#define DMA_CTRL_DELAY_SHIFT 8
#define DMA_CTRL_FREQ_MASK 0xf
#define DMA_CTRL_FREQ_SHIFT 4
#define DMA_CTRL_MODE (1 << 3)
#define DMA_CTRL_CKSUM (1 << 2)
#define DMA_CTRL_DIR (1 << 1)
#define DMA_CTRL_EN (1 << 0)
/* DMA Flash Side Address */
#define R_DMA_FLASH_ADDR (0x84 / 4)
/* DMA DRAM Side Address */
#define R_DMA_DRAM_ADDR (0x88 / 4)
/* DMA Length Register */
#define R_DMA_LEN (0x8C / 4)
/* Checksum Calculation Result */
#define R_DMA_CHECKSUM (0x90 / 4)
/* Misc Control Register #2 */
#define R_TIMINGS (0x94 / 4)
/* SPI controller registers and bits */
#define R_SPI_CONF (0x00 / 4)
#define SPI_CONF_ENABLE_W0 0
#define R_SPI_CTRL0 (0x4 / 4)
#define R_SPI_MISC_CTRL (0x10 / 4)
#define R_SPI_TIMINGS (0x14 / 4)
#define ASPEED_SMC_R_SPI_MAX (0x20 / 4)
#define ASPEED_SMC_R_SMC_MAX (0x20 / 4)
#define ASPEED_SOC_SMC_FLASH_BASE 0x10000000
#define ASPEED_SOC_FMC_FLASH_BASE 0x20000000
#define ASPEED_SOC_SPI_FLASH_BASE 0x30000000
#define ASPEED_SOC_SPI2_FLASH_BASE 0x38000000
/*
* Default segments mapping addresses and size for each slave per
* controller. These can be changed when board is initialized with the
* Segment Address Registers.
*/
static const AspeedSegments aspeed_segments_legacy[] = {
{ 0x10000000, 32 * 1024 * 1024 },
};
static const AspeedSegments aspeed_segments_fmc[] = {
{ 0x20000000, 64 * 1024 * 1024 }, /* start address is readonly */
{ 0x24000000, 32 * 1024 * 1024 },
{ 0x26000000, 32 * 1024 * 1024 },
{ 0x28000000, 32 * 1024 * 1024 },
{ 0x2A000000, 32 * 1024 * 1024 }
};
static const AspeedSegments aspeed_segments_spi[] = {
{ 0x30000000, 64 * 1024 * 1024 },
};
static const AspeedSegments aspeed_segments_ast2500_fmc[] = {
{ 0x20000000, 128 * 1024 * 1024 }, /* start address is readonly */
{ 0x28000000, 32 * 1024 * 1024 },
{ 0x2A000000, 32 * 1024 * 1024 },
};
static const AspeedSegments aspeed_segments_ast2500_spi1[] = {
{ 0x30000000, 32 * 1024 * 1024 }, /* start address is readonly */
{ 0x32000000, 96 * 1024 * 1024 }, /* end address is readonly */
};
static const AspeedSegments aspeed_segments_ast2500_spi2[] = {
{ 0x38000000, 32 * 1024 * 1024 }, /* start address is readonly */
{ 0x3A000000, 96 * 1024 * 1024 }, /* end address is readonly */
};
static const AspeedSMCController controllers[] = {
{
.name = "aspeed.smc.smc",
.r_conf = R_CONF,
.r_ce_ctrl = R_CE_CTRL,
.r_ctrl0 = R_CTRL0,
.r_timings = R_TIMINGS,
.conf_enable_w0 = CONF_ENABLE_W0,
.max_slaves = 5,
.segments = aspeed_segments_legacy,
.flash_window_base = ASPEED_SOC_SMC_FLASH_BASE,
.flash_window_size = 0x6000000,
.has_dma = false,
.nregs = ASPEED_SMC_R_SMC_MAX,
}, {
.name = "aspeed.smc.fmc",
.r_conf = R_CONF,
.r_ce_ctrl = R_CE_CTRL,
.r_ctrl0 = R_CTRL0,
.r_timings = R_TIMINGS,
.conf_enable_w0 = CONF_ENABLE_W0,
.max_slaves = 5,
.segments = aspeed_segments_fmc,
.flash_window_base = ASPEED_SOC_FMC_FLASH_BASE,
.flash_window_size = 0x10000000,
.has_dma = true,
.nregs = ASPEED_SMC_R_MAX,
}, {
.name = "aspeed.smc.spi",
.r_conf = R_SPI_CONF,
.r_ce_ctrl = 0xff,
.r_ctrl0 = R_SPI_CTRL0,
.r_timings = R_SPI_TIMINGS,
.conf_enable_w0 = SPI_CONF_ENABLE_W0,
.max_slaves = 1,
.segments = aspeed_segments_spi,
.flash_window_base = ASPEED_SOC_SPI_FLASH_BASE,
.flash_window_size = 0x10000000,
.has_dma = false,
.nregs = ASPEED_SMC_R_SPI_MAX,
}, {
.name = "aspeed.smc.ast2500-fmc",
.r_conf = R_CONF,
.r_ce_ctrl = R_CE_CTRL,
.r_ctrl0 = R_CTRL0,
.r_timings = R_TIMINGS,
.conf_enable_w0 = CONF_ENABLE_W0,
.max_slaves = 3,
.segments = aspeed_segments_ast2500_fmc,
.flash_window_base = ASPEED_SOC_FMC_FLASH_BASE,
.flash_window_size = 0x10000000,
.has_dma = true,
.nregs = ASPEED_SMC_R_MAX,
}, {
.name = "aspeed.smc.ast2500-spi1",
.r_conf = R_CONF,
.r_ce_ctrl = R_CE_CTRL,
.r_ctrl0 = R_CTRL0,
.r_timings = R_TIMINGS,
.conf_enable_w0 = CONF_ENABLE_W0,
.max_slaves = 2,
.segments = aspeed_segments_ast2500_spi1,
.flash_window_base = ASPEED_SOC_SPI_FLASH_BASE,
.flash_window_size = 0x8000000,
.has_dma = false,
.nregs = ASPEED_SMC_R_MAX,
}, {
.name = "aspeed.smc.ast2500-spi2",
.r_conf = R_CONF,
.r_ce_ctrl = R_CE_CTRL,
.r_ctrl0 = R_CTRL0,
.r_timings = R_TIMINGS,
.conf_enable_w0 = CONF_ENABLE_W0,
.max_slaves = 2,
.segments = aspeed_segments_ast2500_spi2,
.flash_window_base = ASPEED_SOC_SPI2_FLASH_BASE,
.flash_window_size = 0x8000000,
.has_dma = false,
.nregs = ASPEED_SMC_R_MAX,
},
};
/*
* The Segment Register uses a 8MB unit to encode the start address
* and the end address of the mapping window of a flash SPI slave :
*
* | byte 1 | byte 2 | byte 3 | byte 4 |
* +--------+--------+--------+--------+
* | end | start | 0 | 0 |
*
*/
static inline uint32_t aspeed_smc_segment_to_reg(const AspeedSegments *seg)
{
uint32_t reg = 0;
reg |= ((seg->addr >> 23) & SEG_START_MASK) << SEG_START_SHIFT;
reg |= (((seg->addr + seg->size) >> 23) & SEG_END_MASK) << SEG_END_SHIFT;
return reg;
}
static inline void aspeed_smc_reg_to_segment(uint32_t reg, AspeedSegments *seg)
{
seg->addr = ((reg >> SEG_START_SHIFT) & SEG_START_MASK) << 23;
seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr;
}
static bool aspeed_smc_flash_overlap(const AspeedSMCState *s,
const AspeedSegments *new,
int cs)
{
AspeedSegments seg;
int i;
for (i = 0; i < s->ctrl->max_slaves; i++) {
if (i == cs) {
continue;
}
aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + i], &seg);
if (new->addr + new->size > seg.addr &&
new->addr < seg.addr + seg.size) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment CS%d [ 0x%"
HWADDR_PRIx" - 0x%"HWADDR_PRIx" ] overlaps with "
"CS%d [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
s->ctrl->name, cs, new->addr, new->addr + new->size,
i, seg.addr, seg.addr + seg.size);
return true;
}
}
return false;
}
static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs,
uint64_t new)
{
AspeedSMCFlash *fl = &s->flashes[cs];
AspeedSegments seg;
aspeed_smc_reg_to_segment(new, &seg);
/* The start address of CS0 is read-only */
if (cs == 0 && seg.addr != s->ctrl->flash_window_base) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Tried to change CS0 start address to 0x%"
HWADDR_PRIx "\n", s->ctrl->name, seg.addr);
seg.addr = s->ctrl->flash_window_base;
new = aspeed_smc_segment_to_reg(&seg);
}
/*
* The end address of the AST2500 spi controllers is also
* read-only.
*/
if ((s->ctrl->segments == aspeed_segments_ast2500_spi1 ||
s->ctrl->segments == aspeed_segments_ast2500_spi2) &&
cs == s->ctrl->max_slaves &&
seg.addr + seg.size != s->ctrl->segments[cs].addr +
s->ctrl->segments[cs].size) {
qemu_log_mask(LOG_GUEST_ERROR,
"%s: Tried to change CS%d end address to 0x%"
HWADDR_PRIx "\n", s->ctrl->name, cs, seg.addr + seg.size);
seg.size = s->ctrl->segments[cs].addr + s->ctrl->segments[cs].size -
seg.addr;
new = aspeed_smc_segment_to_reg(&seg);
}
/* Keep the segment in the overall flash window */
if (seg.addr + seg.size <= s->ctrl->flash_window_base ||
seg.addr > s->ctrl->flash_window_base + s->ctrl->flash_window_size) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is invalid : "
"[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
s->ctrl->name, cs, seg.addr, seg.addr + seg.size);
return;
}
/* Check start address vs. alignment */
if (seg.size && !QEMU_IS_ALIGNED(seg.addr, seg.size)) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is not "
"aligned : [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
s->ctrl->name, cs, seg.addr, seg.addr + seg.size);
}
/* And segments should not overlap (in the specs) */
aspeed_smc_flash_overlap(s, &seg, cs);
/* All should be fine now to move the region */
memory_region_transaction_begin();
memory_region_set_size(&fl->mmio, seg.size);
memory_region_set_address(&fl->mmio, seg.addr - s->ctrl->flash_window_base);
memory_region_set_enabled(&fl->mmio, true);
memory_region_transaction_commit();
s->regs[R_SEG_ADDR0 + cs] = new;
}
static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr,
unsigned size)
{
qemu_log_mask(LOG_GUEST_ERROR, "%s: To 0x%" HWADDR_PRIx " of size %u"
PRIx64 "\n", __func__, addr, size);
return 0;
}
static void aspeed_smc_flash_default_write(void *opaque, hwaddr addr,
uint64_t data, unsigned size)
{
qemu_log_mask(LOG_GUEST_ERROR, "%s: To 0x%" HWADDR_PRIx " of size %u: 0x%"
PRIx64 "\n", __func__, addr, size, data);
}
static const MemoryRegionOps aspeed_smc_flash_default_ops = {
.read = aspeed_smc_flash_default_read,
.write = aspeed_smc_flash_default_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 4,
},
};
static inline int aspeed_smc_flash_mode(const AspeedSMCFlash *fl)
{
const AspeedSMCState *s = fl->controller;
return s->regs[s->r_ctrl0 + fl->id] & CTRL_CMD_MODE_MASK;
}
static inline bool aspeed_smc_is_usermode(const AspeedSMCFlash *fl)
{
return aspeed_smc_flash_mode(fl) == CTRL_USERMODE;
}
static inline bool aspeed_smc_is_writable(const AspeedSMCFlash *fl)
{
const AspeedSMCState *s = fl->controller;
return s->regs[s->r_conf] & (1 << (s->conf_enable_w0 + fl->id));
}
static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size)
{
AspeedSMCFlash *fl = opaque;
const AspeedSMCState *s = fl->controller;
uint64_t ret = 0;
int i;
if (aspeed_smc_is_usermode(fl)) {
for (i = 0; i < size; i++) {
ret |= ssi_transfer(s->spi, 0x0) << (8 * i);
}
} else {
qemu_log_mask(LOG_UNIMP, "%s: usermode not implemented\n",
__func__);
ret = -1;
}
return ret;
}
static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data,
unsigned size)
{
AspeedSMCFlash *fl = opaque;
const AspeedSMCState *s = fl->controller;
int i;
if (!aspeed_smc_is_writable(fl)) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: flash is not writable at 0x%"
HWADDR_PRIx "\n", __func__, addr);
return;
}
if (!aspeed_smc_is_usermode(fl)) {
qemu_log_mask(LOG_UNIMP, "%s: usermode not implemented\n",
__func__);
return;
}
for (i = 0; i < size; i++) {
ssi_transfer(s->spi, (data >> (8 * i)) & 0xff);
}
}
static const MemoryRegionOps aspeed_smc_flash_ops = {
.read = aspeed_smc_flash_read,
.write = aspeed_smc_flash_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 4,
},
};
static inline bool aspeed_smc_is_ce_stop_active(const AspeedSMCFlash *fl)
{
const AspeedSMCState *s = fl->controller;
return s->regs[s->r_ctrl0 + fl->id] & CTRL_CE_STOP_ACTIVE;
}
static void aspeed_smc_flash_update_cs(AspeedSMCFlash *fl)
{
const AspeedSMCState *s = fl->controller;
qemu_set_irq(s->cs_lines[fl->id], aspeed_smc_is_ce_stop_active(fl));
}
static void aspeed_smc_reset(DeviceState *d)
{
AspeedSMCState *s = ASPEED_SMC(d);
int i;
memset(s->regs, 0, sizeof s->regs);
/* Pretend DMA is done (u-boot initialization) */
s->regs[R_INTR_CTRL] = INTR_CTRL_DMA_STATUS;
/* Unselect all slaves */
for (i = 0; i < s->num_cs; ++i) {
s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE;
qemu_set_irq(s->cs_lines[i], true);
}
/* setup default segment register values for all */
for (i = 0; i < s->ctrl->max_slaves; ++i) {
s->regs[R_SEG_ADDR0 + i] =
aspeed_smc_segment_to_reg(&s->ctrl->segments[i]);
}
/* HW strapping for AST2500 FMC controllers */
if (s->ctrl->segments == aspeed_segments_ast2500_fmc) {
/* flash type is fixed to SPI for CE0 and CE1 */
s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0);
s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1);
/* 4BYTE mode is autodetected for CE0. Let's force it to 1 for
* now */
s->regs[s->r_ce_ctrl] |= (1 << (CTRL_EXTENDED0));
}
/* HW strapping for AST2400 FMC controllers (SCU70). Let's use the
* configuration of the palmetto-bmc machine */
if (s->ctrl->segments == aspeed_segments_fmc) {
s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0);
s->regs[s->r_ce_ctrl] |= (1 << (CTRL_EXTENDED0));
}
}
static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size)
{
AspeedSMCState *s = ASPEED_SMC(opaque);
addr >>= 2;
if (addr == s->r_conf ||
addr == s->r_timings ||
addr == s->r_ce_ctrl ||
addr == R_INTR_CTRL ||
(addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) ||
(addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs)) {
return s->regs[addr];
} else {
qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
__func__, addr);
return 0;
}
}
static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data,
unsigned int size)
{
AspeedSMCState *s = ASPEED_SMC(opaque);
uint32_t value = data;
addr >>= 2;
if (addr == s->r_conf ||
addr == s->r_timings ||
addr == s->r_ce_ctrl) {
s->regs[addr] = value;
} else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) {
int cs = addr - s->r_ctrl0;
s->regs[addr] = value;
aspeed_smc_flash_update_cs(&s->flashes[cs]);
} else if (addr >= R_SEG_ADDR0 &&
addr < R_SEG_ADDR0 + s->ctrl->max_slaves) {
int cs = addr - R_SEG_ADDR0;
if (value != s->regs[R_SEG_ADDR0 + cs]) {
aspeed_smc_flash_set_segment(s, cs, value);
}
} else {
qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
__func__, addr);
return;
}
}
static const MemoryRegionOps aspeed_smc_ops = {
.read = aspeed_smc_read,
.write = aspeed_smc_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid.unaligned = true,
};
static void aspeed_smc_realize(DeviceState *dev, Error **errp)
{
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
AspeedSMCState *s = ASPEED_SMC(dev);
AspeedSMCClass *mc = ASPEED_SMC_GET_CLASS(s);
int i;
char name[32];
hwaddr offset = 0;
s->ctrl = mc->ctrl;
/* keep a copy under AspeedSMCState to speed up accesses */
s->r_conf = s->ctrl->r_conf;
s->r_ce_ctrl = s->ctrl->r_ce_ctrl;
s->r_ctrl0 = s->ctrl->r_ctrl0;
s->r_timings = s->ctrl->r_timings;
s->conf_enable_w0 = s->ctrl->conf_enable_w0;
/* Enforce some real HW limits */
if (s->num_cs > s->ctrl->max_slaves) {
qemu_log_mask(LOG_GUEST_ERROR, "%s: num_cs cannot exceed: %d\n",
__func__, s->ctrl->max_slaves);
s->num_cs = s->ctrl->max_slaves;
}
s->spi = ssi_create_bus(dev, "spi");
/* Setup cs_lines for slaves */
sysbus_init_irq(sbd, &s->irq);
s->cs_lines = g_new0(qemu_irq, s->num_cs);
ssi_auto_connect_slaves(dev, s->cs_lines, s->spi);
for (i = 0; i < s->num_cs; ++i) {
sysbus_init_irq(sbd, &s->cs_lines[i]);
}
/* The memory region for the controller registers */
memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s,
s->ctrl->name, s->ctrl->nregs * 4);
sysbus_init_mmio(sbd, &s->mmio);
/*
* The container memory region representing the address space
* window in which the flash modules are mapped. The size and
* address depends on the SoC model and controller type.
*/
snprintf(name, sizeof(name), "%s.flash", s->ctrl->name);
memory_region_init_io(&s->mmio_flash, OBJECT(s),
&aspeed_smc_flash_default_ops, s, name,
s->ctrl->flash_window_size);
sysbus_init_mmio(sbd, &s->mmio_flash);
s->flashes = g_new0(AspeedSMCFlash, s->ctrl->max_slaves);
/*
* Let's create a sub memory region for each possible slave. All
* have a configurable memory segment in the overall flash mapping
* window of the controller but, there is not necessarily a flash
* module behind to handle the memory accesses. This depends on
* the board configuration.
*/
for (i = 0; i < s->ctrl->max_slaves; ++i) {
AspeedSMCFlash *fl = &s->flashes[i];
snprintf(name, sizeof(name), "%s.%d", s->ctrl->name, i);
fl->id = i;
fl->controller = s;
fl->size = s->ctrl->segments[i].size;
memory_region_init_io(&fl->mmio, OBJECT(s), &aspeed_smc_flash_ops,
fl, name, fl->size);
memory_region_add_subregion(&s->mmio_flash, offset, &fl->mmio);
offset += fl->size;
}
}
static const VMStateDescription vmstate_aspeed_smc = {
.name = "aspeed.smc",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_UINT32_ARRAY(regs, AspeedSMCState, ASPEED_SMC_R_MAX),
VMSTATE_END_OF_LIST()
}
};
static Property aspeed_smc_properties[] = {
DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1),
DEFINE_PROP_END_OF_LIST(),
};
static void aspeed_smc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
AspeedSMCClass *mc = ASPEED_SMC_CLASS(klass);
dc->realize = aspeed_smc_realize;
dc->reset = aspeed_smc_reset;
dc->props = aspeed_smc_properties;
dc->vmsd = &vmstate_aspeed_smc;
mc->ctrl = data;
}
static const TypeInfo aspeed_smc_info = {
.name = TYPE_ASPEED_SMC,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(AspeedSMCState),
.class_size = sizeof(AspeedSMCClass),
.abstract = true,
};
static void aspeed_smc_register_types(void)
{
int i;
type_register_static(&aspeed_smc_info);
for (i = 0; i < ARRAY_SIZE(controllers); ++i) {
TypeInfo ti = {
.name = controllers[i].name,
.parent = TYPE_ASPEED_SMC,
.class_init = aspeed_smc_class_init,
.class_data = (void *)&controllers[i],
};
type_register(&ti);
}
}
type_init(aspeed_smc_register_types)
Reference in a new issue View git blame Copy permalink