The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
633 lines
17 KiB
C
633 lines
17 KiB
C
/*
|
|
* CFI parallel flash with Intel command set emulation
|
|
*
|
|
* Copyright (c) 2006 Thorsten Zitterell
|
|
* Copyright (c) 2005 Jocelyn Mayer
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston MA 02110-1301 USA
|
|
*/
|
|
|
|
/*
|
|
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
|
* Supported commands/modes are:
|
|
* - flash read
|
|
* - flash write
|
|
* - flash ID read
|
|
* - sector erase
|
|
* - CFI queries
|
|
*
|
|
* It does not support timings
|
|
* It does not support flash interleaving
|
|
* It does not implement software data protection as found in many real chips
|
|
* It does not implement erase suspend/resume commands
|
|
* It does not implement multiple sectors erase
|
|
*
|
|
* It does not implement much more ...
|
|
*/
|
|
|
|
#include "hw.h"
|
|
#include "flash.h"
|
|
#include "block.h"
|
|
#include "qemu-timer.h"
|
|
|
|
#define PFLASH_BUG(fmt, args...) \
|
|
do { \
|
|
printf("PFLASH: Possible BUG - " fmt, ##args); \
|
|
exit(1); \
|
|
} while(0)
|
|
|
|
/* #define PFLASH_DEBUG */
|
|
#ifdef PFLASH_DEBUG
|
|
#define DPRINTF(fmt, args...) \
|
|
do { \
|
|
printf("PFLASH: " fmt , ##args); \
|
|
} while (0)
|
|
#else
|
|
#define DPRINTF(fmt, args...) do { } while (0)
|
|
#endif
|
|
|
|
struct pflash_t {
|
|
BlockDriverState *bs;
|
|
target_ulong base;
|
|
target_ulong sector_len;
|
|
target_ulong total_len;
|
|
int width;
|
|
int wcycle; /* if 0, the flash is read normally */
|
|
int bypass;
|
|
int ro;
|
|
uint8_t cmd;
|
|
uint8_t status;
|
|
uint16_t ident[4];
|
|
uint8_t cfi_len;
|
|
uint8_t cfi_table[0x52];
|
|
target_ulong counter;
|
|
QEMUTimer *timer;
|
|
ram_addr_t off;
|
|
int fl_mem;
|
|
void *storage;
|
|
};
|
|
|
|
static void pflash_timer (void *opaque)
|
|
{
|
|
pflash_t *pfl = opaque;
|
|
|
|
DPRINTF("%s: command %02x done\n", __func__, pfl->cmd);
|
|
/* Reset flash */
|
|
pfl->status ^= 0x80;
|
|
if (pfl->bypass) {
|
|
pfl->wcycle = 2;
|
|
} else {
|
|
cpu_register_physical_memory(pfl->base, pfl->total_len,
|
|
pfl->off | IO_MEM_ROMD | pfl->fl_mem);
|
|
pfl->wcycle = 0;
|
|
}
|
|
pfl->cmd = 0;
|
|
}
|
|
|
|
static uint32_t pflash_read (pflash_t *pfl, target_ulong offset, int width)
|
|
{
|
|
target_ulong boff;
|
|
uint32_t ret;
|
|
uint8_t *p;
|
|
|
|
ret = -1;
|
|
boff = offset & 0xFF; /* why this here ?? */
|
|
|
|
if (pfl->width == 2)
|
|
boff = boff >> 1;
|
|
else if (pfl->width == 4)
|
|
boff = boff >> 2;
|
|
|
|
DPRINTF("%s: reading offset " TARGET_FMT_lx " under cmd %02x width %d\n",
|
|
__func__, offset, pfl->cmd, width);
|
|
|
|
switch (pfl->cmd) {
|
|
case 0x00:
|
|
/* Flash area read */
|
|
p = pfl->storage;
|
|
switch (width) {
|
|
case 1:
|
|
ret = p[offset];
|
|
DPRINTF("%s: data offset " TARGET_FMT_lx " %02x\n",
|
|
__func__, offset, ret);
|
|
break;
|
|
case 2:
|
|
#if defined(TARGET_WORDS_BIGENDIAN)
|
|
ret = p[offset] << 8;
|
|
ret |= p[offset + 1];
|
|
#else
|
|
ret = p[offset];
|
|
ret |= p[offset + 1] << 8;
|
|
#endif
|
|
DPRINTF("%s: data offset " TARGET_FMT_lx " %04x\n",
|
|
__func__, offset, ret);
|
|
break;
|
|
case 4:
|
|
#if defined(TARGET_WORDS_BIGENDIAN)
|
|
ret = p[offset] << 24;
|
|
ret |= p[offset + 1] << 16;
|
|
ret |= p[offset + 2] << 8;
|
|
ret |= p[offset + 3];
|
|
#else
|
|
ret = p[offset];
|
|
ret |= p[offset + 1] << 8;
|
|
ret |= p[offset + 1] << 8;
|
|
ret |= p[offset + 2] << 16;
|
|
ret |= p[offset + 3] << 24;
|
|
#endif
|
|
DPRINTF("%s: data offset " TARGET_FMT_lx " %08x\n",
|
|
__func__, offset, ret);
|
|
break;
|
|
default:
|
|
DPRINTF("BUG in %s\n", __func__);
|
|
}
|
|
|
|
break;
|
|
case 0x20: /* Block erase */
|
|
case 0x50: /* Clear status register */
|
|
case 0x60: /* Block /un)lock */
|
|
case 0x70: /* Status Register */
|
|
case 0xe8: /* Write block */
|
|
/* Status register read */
|
|
ret = pfl->status;
|
|
DPRINTF("%s: status %x\n", __func__, ret);
|
|
break;
|
|
case 0x98: /* Query mode */
|
|
if (boff > pfl->cfi_len)
|
|
ret = 0;
|
|
else
|
|
ret = pfl->cfi_table[boff];
|
|
break;
|
|
default:
|
|
/* This should never happen : reset state & treat it as a read */
|
|
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* update flash content on disk */
|
|
static void pflash_update(pflash_t *pfl, int offset,
|
|
int size)
|
|
{
|
|
int offset_end;
|
|
if (pfl->bs) {
|
|
offset_end = offset + size;
|
|
/* round to sectors */
|
|
offset = offset >> 9;
|
|
offset_end = (offset_end + 511) >> 9;
|
|
bdrv_write(pfl->bs, offset, pfl->storage + (offset << 9),
|
|
offset_end - offset);
|
|
}
|
|
}
|
|
|
|
static void inline pflash_data_write(pflash_t *pfl, target_ulong offset,
|
|
uint32_t value, int width)
|
|
{
|
|
uint8_t *p = pfl->storage;
|
|
|
|
DPRINTF("%s: block write offset " TARGET_FMT_lx
|
|
" value %x counter " TARGET_FMT_lx "\n",
|
|
__func__, offset, value, pfl->counter);
|
|
switch (width) {
|
|
case 1:
|
|
p[offset] = value;
|
|
pflash_update(pfl, offset, 1);
|
|
break;
|
|
case 2:
|
|
#if defined(TARGET_WORDS_BIGENDIAN)
|
|
p[offset] = value >> 8;
|
|
p[offset + 1] = value;
|
|
#else
|
|
p[offset] = value;
|
|
p[offset + 1] = value >> 8;
|
|
#endif
|
|
pflash_update(pfl, offset, 2);
|
|
break;
|
|
case 4:
|
|
#if defined(TARGET_WORDS_BIGENDIAN)
|
|
p[offset] = value >> 24;
|
|
p[offset + 1] = value >> 16;
|
|
p[offset + 2] = value >> 8;
|
|
p[offset + 3] = value;
|
|
#else
|
|
p[offset] = value;
|
|
p[offset + 1] = value >> 8;
|
|
p[offset + 2] = value >> 16;
|
|
p[offset + 3] = value >> 24;
|
|
#endif
|
|
pflash_update(pfl, offset, 4);
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
static void pflash_write (pflash_t *pfl, target_ulong offset, uint32_t value,
|
|
int width)
|
|
{
|
|
target_ulong boff;
|
|
uint8_t *p;
|
|
uint8_t cmd;
|
|
|
|
cmd = value;
|
|
|
|
DPRINTF("%s: writing offset " TARGET_FMT_lx " value %08x width %d wcycle 0x%x\n",
|
|
__func__, offset, value, width, pfl->wcycle);
|
|
|
|
/* Set the device in I/O access mode */
|
|
cpu_register_physical_memory(pfl->base, pfl->total_len, pfl->fl_mem);
|
|
boff = offset & (pfl->sector_len - 1);
|
|
|
|
if (pfl->width == 2)
|
|
boff = boff >> 1;
|
|
else if (pfl->width == 4)
|
|
boff = boff >> 2;
|
|
|
|
switch (pfl->wcycle) {
|
|
case 0:
|
|
/* read mode */
|
|
switch (cmd) {
|
|
case 0x00: /* ??? */
|
|
goto reset_flash;
|
|
case 0x10: /* Single Byte Program */
|
|
case 0x40: /* Single Byte Program */
|
|
DPRINTF(stderr, "%s: Single Byte Program\n", __func__);
|
|
break;
|
|
case 0x20: /* Block erase */
|
|
p = pfl->storage;
|
|
offset &= ~(pfl->sector_len - 1);
|
|
|
|
DPRINTF("%s: block erase at " TARGET_FMT_lx " bytes "
|
|
TARGET_FMT_lx "\n",
|
|
__func__, offset, pfl->sector_len);
|
|
|
|
memset(p + offset, 0xff, pfl->sector_len);
|
|
pflash_update(pfl, offset, pfl->sector_len);
|
|
pfl->status |= 0x80; /* Ready! */
|
|
break;
|
|
case 0x50: /* Clear status bits */
|
|
DPRINTF("%s: Clear status bits\n", __func__);
|
|
pfl->status = 0x0;
|
|
goto reset_flash;
|
|
case 0x60: /* Block (un)lock */
|
|
DPRINTF("%s: Block unlock\n", __func__);
|
|
break;
|
|
case 0x70: /* Status Register */
|
|
DPRINTF("%s: Read status register\n", __func__);
|
|
pfl->cmd = cmd;
|
|
return;
|
|
case 0x98: /* CFI query */
|
|
DPRINTF("%s: CFI query\n", __func__);
|
|
break;
|
|
case 0xe8: /* Write to buffer */
|
|
DPRINTF("%s: Write to buffer\n", __func__);
|
|
pfl->status |= 0x80; /* Ready! */
|
|
break;
|
|
case 0xff: /* Read array mode */
|
|
DPRINTF("%s: Read array mode\n", __func__);
|
|
goto reset_flash;
|
|
default:
|
|
goto error_flash;
|
|
}
|
|
pfl->wcycle++;
|
|
pfl->cmd = cmd;
|
|
return;
|
|
case 1:
|
|
switch (pfl->cmd) {
|
|
case 0x10: /* Single Byte Program */
|
|
case 0x40: /* Single Byte Program */
|
|
DPRINTF("%s: Single Byte Program\n", __func__);
|
|
pflash_data_write(pfl, offset, value, width);
|
|
pfl->status |= 0x80; /* Ready! */
|
|
pfl->wcycle = 0;
|
|
break;
|
|
case 0x20: /* Block erase */
|
|
case 0x28:
|
|
if (cmd == 0xd0) { /* confirm */
|
|
pfl->wcycle = 0;
|
|
pfl->status |= 0x80;
|
|
} else if (cmd == 0xff) { /* read array mode */
|
|
goto reset_flash;
|
|
} else
|
|
goto error_flash;
|
|
|
|
break;
|
|
case 0xe8:
|
|
DPRINTF("%s: block write of %x bytes\n", __func__, value);
|
|
pfl->counter = value;
|
|
pfl->wcycle++;
|
|
break;
|
|
case 0x60:
|
|
if (cmd == 0xd0) {
|
|
pfl->wcycle = 0;
|
|
pfl->status |= 0x80;
|
|
} else if (cmd == 0x01) {
|
|
pfl->wcycle = 0;
|
|
pfl->status |= 0x80;
|
|
} else if (cmd == 0xff) {
|
|
goto reset_flash;
|
|
} else {
|
|
DPRINTF("%s: Unknown (un)locking command\n", __func__);
|
|
goto reset_flash;
|
|
}
|
|
break;
|
|
case 0x98:
|
|
if (cmd == 0xff) {
|
|
goto reset_flash;
|
|
} else {
|
|
DPRINTF("%s: leaving query mode\n", __func__);
|
|
}
|
|
break;
|
|
default:
|
|
goto error_flash;
|
|
}
|
|
return;
|
|
case 2:
|
|
switch (pfl->cmd) {
|
|
case 0xe8: /* Block write */
|
|
pflash_data_write(pfl, offset, value, width);
|
|
|
|
pfl->status |= 0x80;
|
|
|
|
if (!pfl->counter) {
|
|
DPRINTF("%s: block write finished\n", __func__);
|
|
pfl->wcycle++;
|
|
}
|
|
|
|
pfl->counter--;
|
|
break;
|
|
default:
|
|
goto error_flash;
|
|
}
|
|
return;
|
|
case 3: /* Confirm mode */
|
|
switch (pfl->cmd) {
|
|
case 0xe8: /* Block write */
|
|
if (cmd == 0xd0) {
|
|
pfl->wcycle = 0;
|
|
pfl->status |= 0x80;
|
|
} else {
|
|
DPRINTF("%s: unknown command for \"write block\"\n", __func__);
|
|
PFLASH_BUG("Write block confirm");
|
|
goto reset_flash;
|
|
}
|
|
break;
|
|
default:
|
|
goto error_flash;
|
|
}
|
|
return;
|
|
default:
|
|
/* Should never happen */
|
|
DPRINTF("%s: invalid write state\n", __func__);
|
|
goto reset_flash;
|
|
}
|
|
return;
|
|
|
|
error_flash:
|
|
printf("%s: Unimplemented flash cmd sequence "
|
|
"(offset " TARGET_FMT_lx ", wcycle 0x%x cmd 0x%x value 0x%x)\n",
|
|
__func__, offset, pfl->wcycle, pfl->cmd, value);
|
|
|
|
reset_flash:
|
|
cpu_register_physical_memory(pfl->base, pfl->total_len,
|
|
pfl->off | IO_MEM_ROMD | pfl->fl_mem);
|
|
|
|
pfl->bypass = 0;
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
return;
|
|
}
|
|
|
|
|
|
static uint32_t pflash_readb (void *opaque, target_phys_addr_t addr)
|
|
{
|
|
return pflash_read(opaque, addr, 1);
|
|
}
|
|
|
|
static uint32_t pflash_readw (void *opaque, target_phys_addr_t addr)
|
|
{
|
|
pflash_t *pfl = opaque;
|
|
|
|
return pflash_read(pfl, addr, 2);
|
|
}
|
|
|
|
static uint32_t pflash_readl (void *opaque, target_phys_addr_t addr)
|
|
{
|
|
pflash_t *pfl = opaque;
|
|
|
|
return pflash_read(pfl, addr, 4);
|
|
}
|
|
|
|
static void pflash_writeb (void *opaque, target_phys_addr_t addr,
|
|
uint32_t value)
|
|
{
|
|
pflash_write(opaque, addr, value, 1);
|
|
}
|
|
|
|
static void pflash_writew (void *opaque, target_phys_addr_t addr,
|
|
uint32_t value)
|
|
{
|
|
pflash_t *pfl = opaque;
|
|
|
|
pflash_write(pfl, addr, value, 2);
|
|
}
|
|
|
|
static void pflash_writel (void *opaque, target_phys_addr_t addr,
|
|
uint32_t value)
|
|
{
|
|
pflash_t *pfl = opaque;
|
|
|
|
pflash_write(pfl, addr, value, 4);
|
|
}
|
|
|
|
static CPUWriteMemoryFunc *pflash_write_ops[] = {
|
|
&pflash_writeb,
|
|
&pflash_writew,
|
|
&pflash_writel,
|
|
};
|
|
|
|
static CPUReadMemoryFunc *pflash_read_ops[] = {
|
|
&pflash_readb,
|
|
&pflash_readw,
|
|
&pflash_readl,
|
|
};
|
|
|
|
/* Count trailing zeroes of a 32 bits quantity */
|
|
static int ctz32 (uint32_t n)
|
|
{
|
|
int ret;
|
|
|
|
ret = 0;
|
|
if (!(n & 0xFFFF)) {
|
|
ret += 16;
|
|
n = n >> 16;
|
|
}
|
|
if (!(n & 0xFF)) {
|
|
ret += 8;
|
|
n = n >> 8;
|
|
}
|
|
if (!(n & 0xF)) {
|
|
ret += 4;
|
|
n = n >> 4;
|
|
}
|
|
if (!(n & 0x3)) {
|
|
ret += 2;
|
|
n = n >> 2;
|
|
}
|
|
if (!(n & 0x1)) {
|
|
ret++;
|
|
n = n >> 1;
|
|
}
|
|
#if 0 /* This is not necessary as n is never 0 */
|
|
if (!n)
|
|
ret++;
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
|
|
pflash_t *pflash_cfi01_register(target_phys_addr_t base, ram_addr_t off,
|
|
BlockDriverState *bs, uint32_t sector_len,
|
|
int nb_blocs, int width,
|
|
uint16_t id0, uint16_t id1,
|
|
uint16_t id2, uint16_t id3)
|
|
{
|
|
pflash_t *pfl;
|
|
target_long total_len;
|
|
|
|
total_len = sector_len * nb_blocs;
|
|
|
|
/* XXX: to be fixed */
|
|
#if 0
|
|
if (total_len != (8 * 1024 * 1024) && total_len != (16 * 1024 * 1024) &&
|
|
total_len != (32 * 1024 * 1024) && total_len != (64 * 1024 * 1024))
|
|
return NULL;
|
|
#endif
|
|
|
|
pfl = qemu_mallocz(sizeof(pflash_t));
|
|
|
|
if (pfl == NULL)
|
|
return NULL;
|
|
pfl->storage = phys_ram_base + off;
|
|
pfl->fl_mem = cpu_register_io_memory(0,
|
|
pflash_read_ops, pflash_write_ops, pfl);
|
|
pfl->off = off;
|
|
cpu_register_physical_memory(base, total_len,
|
|
off | pfl->fl_mem | IO_MEM_ROMD);
|
|
|
|
pfl->bs = bs;
|
|
if (pfl->bs) {
|
|
/* read the initial flash content */
|
|
bdrv_read(pfl->bs, 0, pfl->storage, total_len >> 9);
|
|
}
|
|
#if 0 /* XXX: there should be a bit to set up read-only,
|
|
* the same way the hardware does (with WP pin).
|
|
*/
|
|
pfl->ro = 1;
|
|
#else
|
|
pfl->ro = 0;
|
|
#endif
|
|
pfl->timer = qemu_new_timer(vm_clock, pflash_timer, pfl);
|
|
pfl->base = base;
|
|
pfl->sector_len = sector_len;
|
|
pfl->total_len = total_len;
|
|
pfl->width = width;
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
pfl->status = 0;
|
|
pfl->ident[0] = id0;
|
|
pfl->ident[1] = id1;
|
|
pfl->ident[2] = id2;
|
|
pfl->ident[3] = id3;
|
|
/* Hardcoded CFI table */
|
|
pfl->cfi_len = 0x52;
|
|
/* Standard "QRY" string */
|
|
pfl->cfi_table[0x10] = 'Q';
|
|
pfl->cfi_table[0x11] = 'R';
|
|
pfl->cfi_table[0x12] = 'Y';
|
|
/* Command set (Intel) */
|
|
pfl->cfi_table[0x13] = 0x01;
|
|
pfl->cfi_table[0x14] = 0x00;
|
|
/* Primary extended table address (none) */
|
|
pfl->cfi_table[0x15] = 0x31;
|
|
pfl->cfi_table[0x16] = 0x00;
|
|
/* Alternate command set (none) */
|
|
pfl->cfi_table[0x17] = 0x00;
|
|
pfl->cfi_table[0x18] = 0x00;
|
|
/* Alternate extended table (none) */
|
|
pfl->cfi_table[0x19] = 0x00;
|
|
pfl->cfi_table[0x1A] = 0x00;
|
|
/* Vcc min */
|
|
pfl->cfi_table[0x1B] = 0x45;
|
|
/* Vcc max */
|
|
pfl->cfi_table[0x1C] = 0x55;
|
|
/* Vpp min (no Vpp pin) */
|
|
pfl->cfi_table[0x1D] = 0x00;
|
|
/* Vpp max (no Vpp pin) */
|
|
pfl->cfi_table[0x1E] = 0x00;
|
|
/* Reserved */
|
|
pfl->cfi_table[0x1F] = 0x07;
|
|
/* Timeout for min size buffer write */
|
|
pfl->cfi_table[0x20] = 0x07;
|
|
/* Typical timeout for block erase */
|
|
pfl->cfi_table[0x21] = 0x0a;
|
|
/* Typical timeout for full chip erase (4096 ms) */
|
|
pfl->cfi_table[0x22] = 0x00;
|
|
/* Reserved */
|
|
pfl->cfi_table[0x23] = 0x04;
|
|
/* Max timeout for buffer write */
|
|
pfl->cfi_table[0x24] = 0x04;
|
|
/* Max timeout for block erase */
|
|
pfl->cfi_table[0x25] = 0x04;
|
|
/* Max timeout for chip erase */
|
|
pfl->cfi_table[0x26] = 0x00;
|
|
/* Device size */
|
|
pfl->cfi_table[0x27] = ctz32(total_len); // + 1;
|
|
/* Flash device interface (8 & 16 bits) */
|
|
pfl->cfi_table[0x28] = 0x02;
|
|
pfl->cfi_table[0x29] = 0x00;
|
|
/* Max number of bytes in multi-bytes write */
|
|
pfl->cfi_table[0x2A] = 0x0B;
|
|
pfl->cfi_table[0x2B] = 0x00;
|
|
/* Number of erase block regions (uniform) */
|
|
pfl->cfi_table[0x2C] = 0x01;
|
|
/* Erase block region 1 */
|
|
pfl->cfi_table[0x2D] = nb_blocs - 1;
|
|
pfl->cfi_table[0x2E] = (nb_blocs - 1) >> 8;
|
|
pfl->cfi_table[0x2F] = sector_len >> 8;
|
|
pfl->cfi_table[0x30] = sector_len >> 16;
|
|
|
|
/* Extended */
|
|
pfl->cfi_table[0x31] = 'P';
|
|
pfl->cfi_table[0x32] = 'R';
|
|
pfl->cfi_table[0x33] = 'I';
|
|
|
|
pfl->cfi_table[0x34] = '1';
|
|
pfl->cfi_table[0x35] = '1';
|
|
|
|
pfl->cfi_table[0x36] = 0x00;
|
|
pfl->cfi_table[0x37] = 0x00;
|
|
pfl->cfi_table[0x38] = 0x00;
|
|
pfl->cfi_table[0x39] = 0x00;
|
|
|
|
pfl->cfi_table[0x3a] = 0x00;
|
|
|
|
pfl->cfi_table[0x3b] = 0x00;
|
|
pfl->cfi_table[0x3c] = 0x00;
|
|
|
|
return pfl;
|
|
}
|