qemu-patch-raspberry4/hw/intc/arm_gic_kvm.c
Christoffer Dall 1da41cc1c6 arm: vgic device control api support
Support creating the ARM vgic device through the device control API and
setting the base address for the distributor and cpu interfaces in KVM
VMs using this API.

Because the older KVM_CREATE_IRQCHIP interface needs the irq chip to be
created prior to creating the VCPUs, we first test if we can use the
device control API in kvm_arch_irqchip_create (using the test flag from
the device control API).  If we cannot, it means we have to fall back to
KVM_CREATE_IRQCHIP and use the older ioctl at this point in time.  If
however, we can use the device control API, we don't do anything and
wait until the arm_gic_kvm driver initializes and let that use the
device control API.

Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Message-id: 1392687720-26806-5-git-send-email-christoffer.dall@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-26 17:20:00 +00:00

187 lines
6.1 KiB
C

/*
* ARM Generic Interrupt Controller using KVM in-kernel support
*
* Copyright (c) 2012 Linaro Limited
* Written by Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "hw/sysbus.h"
#include "sysemu/kvm.h"
#include "kvm_arm.h"
#include "gic_internal.h"
#define TYPE_KVM_ARM_GIC "kvm-arm-gic"
#define KVM_ARM_GIC(obj) \
OBJECT_CHECK(GICState, (obj), TYPE_KVM_ARM_GIC)
#define KVM_ARM_GIC_CLASS(klass) \
OBJECT_CLASS_CHECK(KVMARMGICClass, (klass), TYPE_KVM_ARM_GIC)
#define KVM_ARM_GIC_GET_CLASS(obj) \
OBJECT_GET_CLASS(KVMARMGICClass, (obj), TYPE_KVM_ARM_GIC)
typedef struct KVMARMGICClass {
ARMGICCommonClass parent_class;
DeviceRealize parent_realize;
void (*parent_reset)(DeviceState *dev);
} KVMARMGICClass;
static void kvm_arm_gic_set_irq(void *opaque, int irq, int level)
{
/* Meaning of the 'irq' parameter:
* [0..N-1] : external interrupts
* [N..N+31] : PPI (internal) interrupts for CPU 0
* [N+32..N+63] : PPI (internal interrupts for CPU 1
* ...
* Convert this to the kernel's desired encoding, which
* has separate fields in the irq number for type,
* CPU number and interrupt number.
*/
GICState *s = (GICState *)opaque;
int kvm_irq, irqtype, cpu;
if (irq < (s->num_irq - GIC_INTERNAL)) {
/* External interrupt. The kernel numbers these like the GIC
* hardware, with external interrupt IDs starting after the
* internal ones.
*/
irqtype = KVM_ARM_IRQ_TYPE_SPI;
cpu = 0;
irq += GIC_INTERNAL;
} else {
/* Internal interrupt: decode into (cpu, interrupt id) */
irqtype = KVM_ARM_IRQ_TYPE_PPI;
irq -= (s->num_irq - GIC_INTERNAL);
cpu = irq / GIC_INTERNAL;
irq %= GIC_INTERNAL;
}
kvm_irq = (irqtype << KVM_ARM_IRQ_TYPE_SHIFT)
| (cpu << KVM_ARM_IRQ_VCPU_SHIFT) | irq;
kvm_set_irq(kvm_state, kvm_irq, !!level);
}
static void kvm_arm_gic_put(GICState *s)
{
/* TODO: there isn't currently a kernel interface to set the GIC state */
}
static void kvm_arm_gic_get(GICState *s)
{
/* TODO: there isn't currently a kernel interface to get the GIC state */
}
static void kvm_arm_gic_reset(DeviceState *dev)
{
GICState *s = ARM_GIC_COMMON(dev);
KVMARMGICClass *kgc = KVM_ARM_GIC_GET_CLASS(s);
kgc->parent_reset(dev);
kvm_arm_gic_put(s);
}
static void kvm_arm_gic_realize(DeviceState *dev, Error **errp)
{
int i;
GICState *s = KVM_ARM_GIC(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
KVMARMGICClass *kgc = KVM_ARM_GIC_GET_CLASS(s);
int ret;
kgc->parent_realize(dev, errp);
if (error_is_set(errp)) {
return;
}
i = s->num_irq - GIC_INTERNAL;
/* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
* GPIO array layout is thus:
* [0..N-1] SPIs
* [N..N+31] PPIs for CPU 0
* [N+32..N+63] PPIs for CPU 1
* ...
*/
i += (GIC_INTERNAL * s->num_cpu);
qdev_init_gpio_in(dev, kvm_arm_gic_set_irq, i);
/* We never use our outbound IRQ lines but provide them so that
* we maintain the same interface as the non-KVM GIC.
*/
for (i = 0; i < s->num_cpu; i++) {
sysbus_init_irq(sbd, &s->parent_irq[i]);
}
/* Try to create the device via the device control API */
s->dev_fd = -1;
ret = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_V2, false);
if (ret >= 0) {
s->dev_fd = ret;
} else if (ret != -ENODEV && ret != -ENOTSUP) {
error_setg_errno(errp, -ret, "error creating in-kernel VGIC");
return;
}
/* Distributor */
memory_region_init_reservation(&s->iomem, OBJECT(s),
"kvm-gic_dist", 0x1000);
sysbus_init_mmio(sbd, &s->iomem);
kvm_arm_register_device(&s->iomem,
(KVM_ARM_DEVICE_VGIC_V2 << KVM_ARM_DEVICE_ID_SHIFT)
| KVM_VGIC_V2_ADDR_TYPE_DIST,
KVM_DEV_ARM_VGIC_GRP_ADDR,
KVM_VGIC_V2_ADDR_TYPE_DIST,
s->dev_fd);
/* CPU interface for current core. Unlike arm_gic, we don't
* provide the "interface for core #N" memory regions, because
* cores with a VGIC don't have those.
*/
memory_region_init_reservation(&s->cpuiomem[0], OBJECT(s),
"kvm-gic_cpu", 0x1000);
sysbus_init_mmio(sbd, &s->cpuiomem[0]);
kvm_arm_register_device(&s->cpuiomem[0],
(KVM_ARM_DEVICE_VGIC_V2 << KVM_ARM_DEVICE_ID_SHIFT)
| KVM_VGIC_V2_ADDR_TYPE_CPU,
KVM_DEV_ARM_VGIC_GRP_ADDR,
KVM_VGIC_V2_ADDR_TYPE_CPU,
s->dev_fd);
}
static void kvm_arm_gic_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
ARMGICCommonClass *agcc = ARM_GIC_COMMON_CLASS(klass);
KVMARMGICClass *kgc = KVM_ARM_GIC_CLASS(klass);
agcc->pre_save = kvm_arm_gic_get;
agcc->post_load = kvm_arm_gic_put;
kgc->parent_realize = dc->realize;
kgc->parent_reset = dc->reset;
dc->realize = kvm_arm_gic_realize;
dc->reset = kvm_arm_gic_reset;
}
static const TypeInfo kvm_arm_gic_info = {
.name = TYPE_KVM_ARM_GIC,
.parent = TYPE_ARM_GIC_COMMON,
.instance_size = sizeof(GICState),
.class_init = kvm_arm_gic_class_init,
.class_size = sizeof(KVMARMGICClass),
};
static void kvm_arm_gic_register_types(void)
{
type_register_static(&kvm_arm_gic_info);
}
type_init(kvm_arm_gic_register_types)