This patch removes support for the cow file format. Normally we do not break backwards compatibility but in this case there is no impact and it is the most logical option. Extraordinary claims require extraordinary evidence so I will show why removing the cow block driver is the right thing to do. The cow file format is the disk image format for Usermode Linux, a way of running a Linux system in userspace. The performance of UML was never great and it was hacky, but it enjoyed some popularity before hardware virtualization support became mainstream. QEMU's block/cow.c is supposed to read this image file format. Unfortunately the file format was underspecified: 1. Earlier Linux versions used the MAXPATHLEN constant for the backing filename field. The value of MAXPATHLEN can change, so Linux switched to a 4096 literal but QEMU has a 1024 literal. 2. Padding was not used on the header struct (both in the Linux kernel and in QEMU) so the struct layout varied across architectures. In particular, i386 and x86_64 were different due to int64_t alignment differences. Linux now uses __attribute__((packed)), QEMU does not. Therefore: 1. QEMU cow images do not conform to the Linux cow image file format. 2. cow images cannot be shared between different host architectures. This means QEMU cow images are useless and QEMU has not had bug reports from users actually hitting these issues. Let's get rid of this thing, it serves no purpose and no one will be affected. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
1824 lines
56 KiB
Python
1824 lines
56 KiB
Python
# -*- Mode: Python -*-
|
|
#
|
|
# QAPI block core definitions (vm unrelated)
|
|
|
|
# QAPI common definitions
|
|
{ 'include': 'common.json' }
|
|
|
|
##
|
|
# @SnapshotInfo
|
|
#
|
|
# @id: unique snapshot id
|
|
#
|
|
# @name: user chosen name
|
|
#
|
|
# @vm-state-size: size of the VM state
|
|
#
|
|
# @date-sec: UTC date of the snapshot in seconds
|
|
#
|
|
# @date-nsec: fractional part in nano seconds to be used with date-sec
|
|
#
|
|
# @vm-clock-sec: VM clock relative to boot in seconds
|
|
#
|
|
# @vm-clock-nsec: fractional part in nano seconds to be used with vm-clock-sec
|
|
#
|
|
# Since: 1.3
|
|
#
|
|
##
|
|
|
|
{ 'type': 'SnapshotInfo',
|
|
'data': { 'id': 'str', 'name': 'str', 'vm-state-size': 'int',
|
|
'date-sec': 'int', 'date-nsec': 'int',
|
|
'vm-clock-sec': 'int', 'vm-clock-nsec': 'int' } }
|
|
|
|
##
|
|
# @ImageInfoSpecificQCow2:
|
|
#
|
|
# @compat: compatibility level
|
|
#
|
|
# @lazy-refcounts: #optional on or off; only valid for compat >= 1.1
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'ImageInfoSpecificQCow2',
|
|
'data': {
|
|
'compat': 'str',
|
|
'*lazy-refcounts': 'bool'
|
|
} }
|
|
|
|
##
|
|
# @ImageInfoSpecificVmdk:
|
|
#
|
|
# @create-type: The create type of VMDK image
|
|
#
|
|
# @cid: Content id of image
|
|
#
|
|
# @parent-cid: Parent VMDK image's cid
|
|
#
|
|
# @extents: List of extent files
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'ImageInfoSpecificVmdk',
|
|
'data': {
|
|
'create-type': 'str',
|
|
'cid': 'int',
|
|
'parent-cid': 'int',
|
|
'extents': ['ImageInfo']
|
|
} }
|
|
|
|
##
|
|
# @ImageInfoSpecific:
|
|
#
|
|
# A discriminated record of image format specific information structures.
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
|
|
{ 'union': 'ImageInfoSpecific',
|
|
'data': {
|
|
'qcow2': 'ImageInfoSpecificQCow2',
|
|
'vmdk': 'ImageInfoSpecificVmdk'
|
|
} }
|
|
|
|
##
|
|
# @ImageInfo:
|
|
#
|
|
# Information about a QEMU image file
|
|
#
|
|
# @filename: name of the image file
|
|
#
|
|
# @format: format of the image file
|
|
#
|
|
# @virtual-size: maximum capacity in bytes of the image
|
|
#
|
|
# @actual-size: #optional actual size on disk in bytes of the image
|
|
#
|
|
# @dirty-flag: #optional true if image is not cleanly closed
|
|
#
|
|
# @cluster-size: #optional size of a cluster in bytes
|
|
#
|
|
# @encrypted: #optional true if the image is encrypted
|
|
#
|
|
# @compressed: #optional true if the image is compressed (Since 1.7)
|
|
#
|
|
# @backing-filename: #optional name of the backing file
|
|
#
|
|
# @full-backing-filename: #optional full path of the backing file
|
|
#
|
|
# @backing-filename-format: #optional the format of the backing file
|
|
#
|
|
# @snapshots: #optional list of VM snapshots
|
|
#
|
|
# @backing-image: #optional info of the backing image (since 1.6)
|
|
#
|
|
# @format-specific: #optional structure supplying additional format-specific
|
|
# information (since 1.7)
|
|
#
|
|
# @nocow: #optional info of whether NOCOW flag is set or not. (since 2.2)
|
|
#
|
|
# Since: 1.3
|
|
#
|
|
##
|
|
|
|
{ 'type': 'ImageInfo',
|
|
'data': {'filename': 'str', 'format': 'str', '*dirty-flag': 'bool',
|
|
'*actual-size': 'int', 'virtual-size': 'int',
|
|
'*cluster-size': 'int', '*encrypted': 'bool', '*compressed': 'bool',
|
|
'*backing-filename': 'str', '*full-backing-filename': 'str',
|
|
'*backing-filename-format': 'str', '*snapshots': ['SnapshotInfo'],
|
|
'*backing-image': 'ImageInfo',
|
|
'*format-specific': 'ImageInfoSpecific',
|
|
'*nocow': 'bool' } }
|
|
|
|
##
|
|
# @ImageCheck:
|
|
#
|
|
# Information about a QEMU image file check
|
|
#
|
|
# @filename: name of the image file checked
|
|
#
|
|
# @format: format of the image file checked
|
|
#
|
|
# @check-errors: number of unexpected errors occurred during check
|
|
#
|
|
# @image-end-offset: #optional offset (in bytes) where the image ends, this
|
|
# field is present if the driver for the image format
|
|
# supports it
|
|
#
|
|
# @corruptions: #optional number of corruptions found during the check if any
|
|
#
|
|
# @leaks: #optional number of leaks found during the check if any
|
|
#
|
|
# @corruptions-fixed: #optional number of corruptions fixed during the check
|
|
# if any
|
|
#
|
|
# @leaks-fixed: #optional number of leaks fixed during the check if any
|
|
#
|
|
# @total-clusters: #optional total number of clusters, this field is present
|
|
# if the driver for the image format supports it
|
|
#
|
|
# @allocated-clusters: #optional total number of allocated clusters, this
|
|
# field is present if the driver for the image format
|
|
# supports it
|
|
#
|
|
# @fragmented-clusters: #optional total number of fragmented clusters, this
|
|
# field is present if the driver for the image format
|
|
# supports it
|
|
#
|
|
# @compressed-clusters: #optional total number of compressed clusters, this
|
|
# field is present if the driver for the image format
|
|
# supports it
|
|
#
|
|
# Since: 1.4
|
|
#
|
|
##
|
|
|
|
{ 'type': 'ImageCheck',
|
|
'data': {'filename': 'str', 'format': 'str', 'check-errors': 'int',
|
|
'*image-end-offset': 'int', '*corruptions': 'int', '*leaks': 'int',
|
|
'*corruptions-fixed': 'int', '*leaks-fixed': 'int',
|
|
'*total-clusters': 'int', '*allocated-clusters': 'int',
|
|
'*fragmented-clusters': 'int', '*compressed-clusters': 'int' } }
|
|
|
|
##
|
|
# @BlockDeviceInfo:
|
|
#
|
|
# Information about the backing device for a block device.
|
|
#
|
|
# @file: the filename of the backing device
|
|
#
|
|
# @node-name: #optional the name of the block driver node (Since 2.0)
|
|
#
|
|
# @ro: true if the backing device was open read-only
|
|
#
|
|
# @drv: the name of the block format used to open the backing device. As of
|
|
# 0.14.0 this can be: 'blkdebug', 'bochs', 'cloop', 'cow', 'dmg',
|
|
# 'file', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
|
|
# 'host_floppy', 'http', 'https', 'nbd', 'parallels', 'qcow',
|
|
# 'qcow2', 'raw', 'tftp', 'vdi', 'vmdk', 'vpc', 'vvfat'
|
|
# 2.2: 'archipelago' added, 'cow' dropped
|
|
#
|
|
# @backing_file: #optional the name of the backing file (for copy-on-write)
|
|
#
|
|
# @backing_file_depth: number of files in the backing file chain (since: 1.2)
|
|
#
|
|
# @encrypted: true if the backing device is encrypted
|
|
#
|
|
# @encryption_key_missing: true if the backing device is encrypted but an
|
|
# valid encryption key is missing
|
|
#
|
|
# @detect_zeroes: detect and optimize zero writes (Since 2.1)
|
|
#
|
|
# @bps: total throughput limit in bytes per second is specified
|
|
#
|
|
# @bps_rd: read throughput limit in bytes per second is specified
|
|
#
|
|
# @bps_wr: write throughput limit in bytes per second is specified
|
|
#
|
|
# @iops: total I/O operations per second is specified
|
|
#
|
|
# @iops_rd: read I/O operations per second is specified
|
|
#
|
|
# @iops_wr: write I/O operations per second is specified
|
|
#
|
|
# @image: the info of image used (since: 1.6)
|
|
#
|
|
# @bps_max: #optional total max in bytes (Since 1.7)
|
|
#
|
|
# @bps_rd_max: #optional read max in bytes (Since 1.7)
|
|
#
|
|
# @bps_wr_max: #optional write max in bytes (Since 1.7)
|
|
#
|
|
# @iops_max: #optional total I/O operations max (Since 1.7)
|
|
#
|
|
# @iops_rd_max: #optional read I/O operations max (Since 1.7)
|
|
#
|
|
# @iops_wr_max: #optional write I/O operations max (Since 1.7)
|
|
#
|
|
# @iops_size: #optional an I/O size in bytes (Since 1.7)
|
|
#
|
|
# Since: 0.14.0
|
|
#
|
|
##
|
|
{ 'type': 'BlockDeviceInfo',
|
|
'data': { 'file': 'str', '*node-name': 'str', 'ro': 'bool', 'drv': 'str',
|
|
'*backing_file': 'str', 'backing_file_depth': 'int',
|
|
'encrypted': 'bool', 'encryption_key_missing': 'bool',
|
|
'detect_zeroes': 'BlockdevDetectZeroesOptions',
|
|
'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
|
|
'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
|
|
'image': 'ImageInfo',
|
|
'*bps_max': 'int', '*bps_rd_max': 'int',
|
|
'*bps_wr_max': 'int', '*iops_max': 'int',
|
|
'*iops_rd_max': 'int', '*iops_wr_max': 'int',
|
|
'*iops_size': 'int' } }
|
|
|
|
##
|
|
# @BlockDeviceIoStatus:
|
|
#
|
|
# An enumeration of block device I/O status.
|
|
#
|
|
# @ok: The last I/O operation has succeeded
|
|
#
|
|
# @failed: The last I/O operation has failed
|
|
#
|
|
# @nospace: The last I/O operation has failed due to a no-space condition
|
|
#
|
|
# Since: 1.0
|
|
##
|
|
{ 'enum': 'BlockDeviceIoStatus', 'data': [ 'ok', 'failed', 'nospace' ] }
|
|
|
|
##
|
|
# @BlockDeviceMapEntry:
|
|
#
|
|
# Entry in the metadata map of the device (returned by "qemu-img map")
|
|
#
|
|
# @start: Offset in the image of the first byte described by this entry
|
|
# (in bytes)
|
|
#
|
|
# @length: Length of the range described by this entry (in bytes)
|
|
#
|
|
# @depth: Number of layers (0 = top image, 1 = top image's backing file, etc.)
|
|
# before reaching one for which the range is allocated. The value is
|
|
# in the range 0 to the depth of the image chain - 1.
|
|
#
|
|
# @zero: the sectors in this range read as zeros
|
|
#
|
|
# @data: reading the image will actually read data from a file (in particular,
|
|
# if @offset is present this means that the sectors are not simply
|
|
# preallocated, but contain actual data in raw format)
|
|
#
|
|
# @offset: if present, the image file stores the data for this range in
|
|
# raw format at the given offset.
|
|
#
|
|
# Since 1.7
|
|
##
|
|
{ 'type': 'BlockDeviceMapEntry',
|
|
'data': { 'start': 'int', 'length': 'int', 'depth': 'int', 'zero': 'bool',
|
|
'data': 'bool', '*offset': 'int' } }
|
|
|
|
##
|
|
# @BlockDirtyInfo:
|
|
#
|
|
# Block dirty bitmap information.
|
|
#
|
|
# @count: number of dirty bytes according to the dirty bitmap
|
|
#
|
|
# @granularity: granularity of the dirty bitmap in bytes (since 1.4)
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'type': 'BlockDirtyInfo',
|
|
'data': {'count': 'int', 'granularity': 'int'} }
|
|
|
|
##
|
|
# @BlockInfo:
|
|
#
|
|
# Block device information. This structure describes a virtual device and
|
|
# the backing device associated with it.
|
|
#
|
|
# @device: The device name associated with the virtual device.
|
|
#
|
|
# @type: This field is returned only for compatibility reasons, it should
|
|
# not be used (always returns 'unknown')
|
|
#
|
|
# @removable: True if the device supports removable media.
|
|
#
|
|
# @locked: True if the guest has locked this device from having its media
|
|
# removed
|
|
#
|
|
# @tray_open: #optional True if the device has a tray and it is open
|
|
# (only present if removable is true)
|
|
#
|
|
# @dirty-bitmaps: #optional dirty bitmaps information (only present if the
|
|
# driver has one or more dirty bitmaps) (Since 2.0)
|
|
#
|
|
# @io-status: #optional @BlockDeviceIoStatus. Only present if the device
|
|
# supports it and the VM is configured to stop on errors
|
|
# (supported device models: virtio-blk, ide, scsi-disk)
|
|
#
|
|
# @inserted: #optional @BlockDeviceInfo describing the device if media is
|
|
# present
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'type': 'BlockInfo',
|
|
'data': {'device': 'str', 'type': 'str', 'removable': 'bool',
|
|
'locked': 'bool', '*inserted': 'BlockDeviceInfo',
|
|
'*tray_open': 'bool', '*io-status': 'BlockDeviceIoStatus',
|
|
'*dirty-bitmaps': ['BlockDirtyInfo'] } }
|
|
|
|
##
|
|
# @query-block:
|
|
#
|
|
# Get a list of BlockInfo for all virtual block devices.
|
|
#
|
|
# Returns: a list of @BlockInfo describing each virtual block device
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'command': 'query-block', 'returns': ['BlockInfo'] }
|
|
|
|
##
|
|
# @BlockDeviceStats:
|
|
#
|
|
# Statistics of a virtual block device or a block backing device.
|
|
#
|
|
# @rd_bytes: The number of bytes read by the device.
|
|
#
|
|
# @wr_bytes: The number of bytes written by the device.
|
|
#
|
|
# @rd_operations: The number of read operations performed by the device.
|
|
#
|
|
# @wr_operations: The number of write operations performed by the device.
|
|
#
|
|
# @flush_operations: The number of cache flush operations performed by the
|
|
# device (since 0.15.0)
|
|
#
|
|
# @flush_total_time_ns: Total time spend on cache flushes in nano-seconds
|
|
# (since 0.15.0).
|
|
#
|
|
# @wr_total_time_ns: Total time spend on writes in nano-seconds (since 0.15.0).
|
|
#
|
|
# @rd_total_time_ns: Total_time_spend on reads in nano-seconds (since 0.15.0).
|
|
#
|
|
# @wr_highest_offset: The offset after the greatest byte written to the
|
|
# device. The intended use of this information is for
|
|
# growable sparse files (like qcow2) that are used on top
|
|
# of a physical device.
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'type': 'BlockDeviceStats',
|
|
'data': {'rd_bytes': 'int', 'wr_bytes': 'int', 'rd_operations': 'int',
|
|
'wr_operations': 'int', 'flush_operations': 'int',
|
|
'flush_total_time_ns': 'int', 'wr_total_time_ns': 'int',
|
|
'rd_total_time_ns': 'int', 'wr_highest_offset': 'int' } }
|
|
|
|
##
|
|
# @BlockStats:
|
|
#
|
|
# Statistics of a virtual block device or a block backing device.
|
|
#
|
|
# @device: #optional If the stats are for a virtual block device, the name
|
|
# corresponding to the virtual block device.
|
|
#
|
|
# @stats: A @BlockDeviceStats for the device.
|
|
#
|
|
# @parent: #optional This describes the file block device if it has one.
|
|
#
|
|
# @backing: #optional This describes the backing block device if it has one.
|
|
# (Since 2.0)
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'type': 'BlockStats',
|
|
'data': {'*device': 'str', 'stats': 'BlockDeviceStats',
|
|
'*parent': 'BlockStats',
|
|
'*backing': 'BlockStats'} }
|
|
|
|
##
|
|
# @query-blockstats:
|
|
#
|
|
# Query the @BlockStats for all virtual block devices.
|
|
#
|
|
# Returns: A list of @BlockStats for each virtual block devices.
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'command': 'query-blockstats', 'returns': ['BlockStats'] }
|
|
|
|
##
|
|
# @BlockdevOnError:
|
|
#
|
|
# An enumeration of possible behaviors for errors on I/O operations.
|
|
# The exact meaning depends on whether the I/O was initiated by a guest
|
|
# or by a block job
|
|
#
|
|
# @report: for guest operations, report the error to the guest;
|
|
# for jobs, cancel the job
|
|
#
|
|
# @ignore: ignore the error, only report a QMP event (BLOCK_IO_ERROR
|
|
# or BLOCK_JOB_ERROR)
|
|
#
|
|
# @enospc: same as @stop on ENOSPC, same as @report otherwise.
|
|
#
|
|
# @stop: for guest operations, stop the virtual machine;
|
|
# for jobs, pause the job
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'enum': 'BlockdevOnError',
|
|
'data': ['report', 'ignore', 'enospc', 'stop'] }
|
|
|
|
##
|
|
# @MirrorSyncMode:
|
|
#
|
|
# An enumeration of possible behaviors for the initial synchronization
|
|
# phase of storage mirroring.
|
|
#
|
|
# @top: copies data in the topmost image to the destination
|
|
#
|
|
# @full: copies data from all images to the destination
|
|
#
|
|
# @none: only copy data written from now on
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'enum': 'MirrorSyncMode',
|
|
'data': ['top', 'full', 'none'] }
|
|
|
|
##
|
|
# @BlockJobType:
|
|
#
|
|
# Type of a block job.
|
|
#
|
|
# @commit: block commit job type, see "block-commit"
|
|
#
|
|
# @stream: block stream job type, see "block-stream"
|
|
#
|
|
# @mirror: drive mirror job type, see "drive-mirror"
|
|
#
|
|
# @backup: drive backup job type, see "drive-backup"
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'enum': 'BlockJobType',
|
|
'data': ['commit', 'stream', 'mirror', 'backup'] }
|
|
|
|
##
|
|
# @BlockJobInfo:
|
|
#
|
|
# Information about a long-running block device operation.
|
|
#
|
|
# @type: the job type ('stream' for image streaming)
|
|
#
|
|
# @device: the block device name
|
|
#
|
|
# @len: the maximum progress value
|
|
#
|
|
# @busy: false if the job is known to be in a quiescent state, with
|
|
# no pending I/O. Since 1.3.
|
|
#
|
|
# @paused: whether the job is paused or, if @busy is true, will
|
|
# pause itself as soon as possible. Since 1.3.
|
|
#
|
|
# @offset: the current progress value
|
|
#
|
|
# @speed: the rate limit, bytes per second
|
|
#
|
|
# @io-status: the status of the job (since 1.3)
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'type': 'BlockJobInfo',
|
|
'data': {'type': 'str', 'device': 'str', 'len': 'int',
|
|
'offset': 'int', 'busy': 'bool', 'paused': 'bool', 'speed': 'int',
|
|
'io-status': 'BlockDeviceIoStatus'} }
|
|
|
|
##
|
|
# @query-block-jobs:
|
|
#
|
|
# Return information about long-running block device operations.
|
|
#
|
|
# Returns: a list of @BlockJobInfo for each active block job
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'query-block-jobs', 'returns': ['BlockJobInfo'] }
|
|
|
|
##
|
|
# @block_passwd:
|
|
#
|
|
# This command sets the password of a block device that has not been open
|
|
# with a password and requires one.
|
|
#
|
|
# The two cases where this can happen are a block device is created through
|
|
# QEMU's initial command line or a block device is changed through the legacy
|
|
# @change interface.
|
|
#
|
|
# In the event that the block device is created through the initial command
|
|
# line, the VM will start in the stopped state regardless of whether '-S' is
|
|
# used. The intention is for a management tool to query the block devices to
|
|
# determine which ones are encrypted, set the passwords with this command, and
|
|
# then start the guest with the @cont command.
|
|
#
|
|
# Either @device or @node-name must be set but not both.
|
|
#
|
|
# @device: #optional the name of the block backend device to set the password on
|
|
#
|
|
# @node-name: #optional graph node name to set the password on (Since 2.0)
|
|
#
|
|
# @password: the password to use for the device
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
# If @device is not encrypted, DeviceNotEncrypted
|
|
#
|
|
# Notes: Not all block formats support encryption and some that do are not
|
|
# able to validate that a password is correct. Disk corruption may
|
|
# occur if an invalid password is specified.
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'command': 'block_passwd', 'data': {'*device': 'str',
|
|
'*node-name': 'str', 'password': 'str'} }
|
|
|
|
##
|
|
# @block_resize
|
|
#
|
|
# Resize a block image while a guest is running.
|
|
#
|
|
# Either @device or @node-name must be set but not both.
|
|
#
|
|
# @device: #optional the name of the device to get the image resized
|
|
#
|
|
# @node-name: #optional graph node name to get the image resized (Since 2.0)
|
|
#
|
|
# @size: new image size in bytes
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since: 0.14.0
|
|
##
|
|
{ 'command': 'block_resize', 'data': { '*device': 'str',
|
|
'*node-name': 'str',
|
|
'size': 'int' }}
|
|
|
|
##
|
|
# @NewImageMode
|
|
#
|
|
# An enumeration that tells QEMU how to set the backing file path in
|
|
# a new image file.
|
|
#
|
|
# @existing: QEMU should look for an existing image file.
|
|
#
|
|
# @absolute-paths: QEMU should create a new image with absolute paths
|
|
# for the backing file. If there is no backing file available, the new
|
|
# image will not be backed either.
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'enum': 'NewImageMode',
|
|
'data': [ 'existing', 'absolute-paths' ] }
|
|
|
|
##
|
|
# @BlockdevSnapshot
|
|
#
|
|
# Either @device or @node-name must be set but not both.
|
|
#
|
|
# @device: #optional the name of the device to generate the snapshot from.
|
|
#
|
|
# @node-name: #optional graph node name to generate the snapshot from (Since 2.0)
|
|
#
|
|
# @snapshot-file: the target of the new image. A new file will be created.
|
|
#
|
|
# @snapshot-node-name: #optional the graph node name of the new image (Since 2.0)
|
|
#
|
|
# @format: #optional the format of the snapshot image, default is 'qcow2'.
|
|
#
|
|
# @mode: #optional whether and how QEMU should create a new image, default is
|
|
# 'absolute-paths'.
|
|
##
|
|
{ 'type': 'BlockdevSnapshot',
|
|
'data': { '*device': 'str', '*node-name': 'str',
|
|
'snapshot-file': 'str', '*snapshot-node-name': 'str',
|
|
'*format': 'str', '*mode': 'NewImageMode' } }
|
|
|
|
##
|
|
# @DriveBackup
|
|
#
|
|
# @device: the name of the device which should be copied.
|
|
#
|
|
# @target: the target of the new image. If the file exists, or if it
|
|
# is a device, the existing file/device will be used as the new
|
|
# destination. If it does not exist, a new file will be created.
|
|
#
|
|
# @format: #optional the format of the new destination, default is to
|
|
# probe if @mode is 'existing', else the format of the source
|
|
#
|
|
# @sync: what parts of the disk image should be copied to the destination
|
|
# (all the disk, only the sectors allocated in the topmost image, or
|
|
# only new I/O).
|
|
#
|
|
# @mode: #optional whether and how QEMU should create a new image, default is
|
|
# 'absolute-paths'.
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# @on-source-error: #optional the action to take on an error on the source,
|
|
# default 'report'. 'stop' and 'enospc' can only be used
|
|
# if the block device supports io-status (see BlockInfo).
|
|
#
|
|
# @on-target-error: #optional the action to take on an error on the target,
|
|
# default 'report' (no limitations, since this applies to
|
|
# a different block device than @device).
|
|
#
|
|
# Note that @on-source-error and @on-target-error only affect background I/O.
|
|
# If an error occurs during a guest write request, the device's rerror/werror
|
|
# actions will be used.
|
|
#
|
|
# Since: 1.6
|
|
##
|
|
{ 'type': 'DriveBackup',
|
|
'data': { 'device': 'str', 'target': 'str', '*format': 'str',
|
|
'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
|
|
'*speed': 'int',
|
|
'*on-source-error': 'BlockdevOnError',
|
|
'*on-target-error': 'BlockdevOnError' } }
|
|
|
|
##
|
|
# @blockdev-snapshot-sync
|
|
#
|
|
# Generates a synchronous snapshot of a block device.
|
|
#
|
|
# For the arguments, see the documentation of BlockdevSnapshot.
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since 0.14.0
|
|
##
|
|
{ 'command': 'blockdev-snapshot-sync',
|
|
'data': 'BlockdevSnapshot' }
|
|
|
|
##
|
|
# @change-backing-file
|
|
#
|
|
# Change the backing file in the image file metadata. This does not
|
|
# cause QEMU to reopen the image file to reparse the backing filename
|
|
# (it may, however, perform a reopen to change permissions from
|
|
# r/o -> r/w -> r/o, if needed). The new backing file string is written
|
|
# into the image file metadata, and the QEMU internal strings are
|
|
# updated.
|
|
#
|
|
# @image-node-name: The name of the block driver state node of the
|
|
# image to modify.
|
|
#
|
|
# @device: The name of the device that owns image-node-name.
|
|
#
|
|
# @backing-file: The string to write as the backing file. This
|
|
# string is not validated, so care should be taken
|
|
# when specifying the string or the image chain may
|
|
# not be able to be reopened again.
|
|
#
|
|
# Since: 2.1
|
|
##
|
|
{ 'command': 'change-backing-file',
|
|
'data': { 'device': 'str', 'image-node-name': 'str',
|
|
'backing-file': 'str' } }
|
|
|
|
##
|
|
# @block-commit
|
|
#
|
|
# Live commit of data from overlay image nodes into backing nodes - i.e.,
|
|
# writes data between 'top' and 'base' into 'base'.
|
|
#
|
|
# @device: the name of the device
|
|
#
|
|
# @base: #optional The file name of the backing image to write data into.
|
|
# If not specified, this is the deepest backing image
|
|
#
|
|
# @top: #optional The file name of the backing image within the image chain,
|
|
# which contains the topmost data to be committed down. If
|
|
# not specified, this is the active layer.
|
|
#
|
|
# @backing-file: #optional The backing file string to write into the overlay
|
|
# image of 'top'. If 'top' is the active layer,
|
|
# specifying a backing file string is an error. This
|
|
# filename is not validated.
|
|
#
|
|
# If a pathname string is such that it cannot be
|
|
# resolved by QEMU, that means that subsequent QMP or
|
|
# HMP commands must use node-names for the image in
|
|
# question, as filename lookup methods will fail.
|
|
#
|
|
# If not specified, QEMU will automatically determine
|
|
# the backing file string to use, or error out if
|
|
# there is no obvious choice. Care should be taken
|
|
# when specifying the string, to specify a valid
|
|
# filename or protocol.
|
|
# (Since 2.1)
|
|
#
|
|
# If top == base, that is an error.
|
|
# If top == active, the job will not be completed by itself,
|
|
# user needs to complete the job with the block-job-complete
|
|
# command after getting the ready event. (Since 2.0)
|
|
#
|
|
# If the base image is smaller than top, then the base image
|
|
# will be resized to be the same size as top. If top is
|
|
# smaller than the base image, the base will not be
|
|
# truncated. If you want the base image size to match the
|
|
# size of the smaller top, you can safely truncate it
|
|
# yourself once the commit operation successfully completes.
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# Returns: Nothing on success
|
|
# If commit or stream is already active on this device, DeviceInUse
|
|
# If @device does not exist, DeviceNotFound
|
|
# If image commit is not supported by this device, NotSupported
|
|
# If @base or @top is invalid, a generic error is returned
|
|
# If @speed is invalid, InvalidParameter
|
|
#
|
|
# Since: 1.3
|
|
#
|
|
##
|
|
{ 'command': 'block-commit',
|
|
'data': { 'device': 'str', '*base': 'str', '*top': 'str',
|
|
'*backing-file': 'str', '*speed': 'int' } }
|
|
|
|
##
|
|
# @drive-backup
|
|
#
|
|
# Start a point-in-time copy of a block device to a new destination. The
|
|
# status of ongoing drive-backup operations can be checked with
|
|
# query-block-jobs where the BlockJobInfo.type field has the value 'backup'.
|
|
# The operation can be stopped before it has completed using the
|
|
# block-job-cancel command.
|
|
#
|
|
# For the arguments, see the documentation of DriveBackup.
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since 1.6
|
|
##
|
|
{ 'command': 'drive-backup', 'data': 'DriveBackup' }
|
|
|
|
##
|
|
# @query-named-block-nodes
|
|
#
|
|
# Get the named block driver list
|
|
#
|
|
# Returns: the list of BlockDeviceInfo
|
|
#
|
|
# Since 2.0
|
|
##
|
|
{ 'command': 'query-named-block-nodes', 'returns': [ 'BlockDeviceInfo' ] }
|
|
|
|
##
|
|
# @drive-mirror
|
|
#
|
|
# Start mirroring a block device's writes to a new destination.
|
|
#
|
|
# @device: the name of the device whose writes should be mirrored.
|
|
#
|
|
# @target: the target of the new image. If the file exists, or if it
|
|
# is a device, the existing file/device will be used as the new
|
|
# destination. If it does not exist, a new file will be created.
|
|
#
|
|
# @format: #optional the format of the new destination, default is to
|
|
# probe if @mode is 'existing', else the format of the source
|
|
#
|
|
# @node-name: #optional the new block driver state node name in the graph
|
|
# (Since 2.1)
|
|
#
|
|
# @replaces: #optional with sync=full graph node name to be replaced by the new
|
|
# image when a whole image copy is done. This can be used to repair
|
|
# broken Quorum files. (Since 2.1)
|
|
#
|
|
# @mode: #optional whether and how QEMU should create a new image, default is
|
|
# 'absolute-paths'.
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# @sync: what parts of the disk image should be copied to the destination
|
|
# (all the disk, only the sectors allocated in the topmost image, or
|
|
# only new I/O).
|
|
#
|
|
# @granularity: #optional granularity of the dirty bitmap, default is 64K
|
|
# if the image format doesn't have clusters, 4K if the clusters
|
|
# are smaller than that, else the cluster size. Must be a
|
|
# power of 2 between 512 and 64M (since 1.4).
|
|
#
|
|
# @buf-size: #optional maximum amount of data in flight from source to
|
|
# target (since 1.4).
|
|
#
|
|
# @on-source-error: #optional the action to take on an error on the source,
|
|
# default 'report'. 'stop' and 'enospc' can only be used
|
|
# if the block device supports io-status (see BlockInfo).
|
|
#
|
|
# @on-target-error: #optional the action to take on an error on the target,
|
|
# default 'report' (no limitations, since this applies to
|
|
# a different block device than @device).
|
|
#
|
|
# Returns: nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since 1.3
|
|
##
|
|
{ 'command': 'drive-mirror',
|
|
'data': { 'device': 'str', 'target': 'str', '*format': 'str',
|
|
'*node-name': 'str', '*replaces': 'str',
|
|
'sync': 'MirrorSyncMode', '*mode': 'NewImageMode',
|
|
'*speed': 'int', '*granularity': 'uint32',
|
|
'*buf-size': 'int', '*on-source-error': 'BlockdevOnError',
|
|
'*on-target-error': 'BlockdevOnError' } }
|
|
|
|
##
|
|
# @block_set_io_throttle:
|
|
#
|
|
# Change I/O throttle limits for a block drive.
|
|
#
|
|
# @device: The name of the device
|
|
#
|
|
# @bps: total throughput limit in bytes per second
|
|
#
|
|
# @bps_rd: read throughput limit in bytes per second
|
|
#
|
|
# @bps_wr: write throughput limit in bytes per second
|
|
#
|
|
# @iops: total I/O operations per second
|
|
#
|
|
# @ops_rd: read I/O operations per second
|
|
#
|
|
# @iops_wr: write I/O operations per second
|
|
#
|
|
# @bps_max: #optional total max in bytes (Since 1.7)
|
|
#
|
|
# @bps_rd_max: #optional read max in bytes (Since 1.7)
|
|
#
|
|
# @bps_wr_max: #optional write max in bytes (Since 1.7)
|
|
#
|
|
# @iops_max: #optional total I/O operations max (Since 1.7)
|
|
#
|
|
# @iops_rd_max: #optional read I/O operations max (Since 1.7)
|
|
#
|
|
# @iops_wr_max: #optional write I/O operations max (Since 1.7)
|
|
#
|
|
# @iops_size: #optional an I/O size in bytes (Since 1.7)
|
|
#
|
|
# Returns: Nothing on success
|
|
# If @device is not a valid block device, DeviceNotFound
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'block_set_io_throttle',
|
|
'data': { 'device': 'str', 'bps': 'int', 'bps_rd': 'int', 'bps_wr': 'int',
|
|
'iops': 'int', 'iops_rd': 'int', 'iops_wr': 'int',
|
|
'*bps_max': 'int', '*bps_rd_max': 'int',
|
|
'*bps_wr_max': 'int', '*iops_max': 'int',
|
|
'*iops_rd_max': 'int', '*iops_wr_max': 'int',
|
|
'*iops_size': 'int' } }
|
|
|
|
##
|
|
# @block-stream:
|
|
#
|
|
# Copy data from a backing file into a block device.
|
|
#
|
|
# The block streaming operation is performed in the background until the entire
|
|
# backing file has been copied. This command returns immediately once streaming
|
|
# has started. The status of ongoing block streaming operations can be checked
|
|
# with query-block-jobs. The operation can be stopped before it has completed
|
|
# using the block-job-cancel command.
|
|
#
|
|
# If a base file is specified then sectors are not copied from that base file and
|
|
# its backing chain. When streaming completes the image file will have the base
|
|
# file as its backing file. This can be used to stream a subset of the backing
|
|
# file chain instead of flattening the entire image.
|
|
#
|
|
# On successful completion the image file is updated to drop the backing file
|
|
# and the BLOCK_JOB_COMPLETED event is emitted.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# @base: #optional the common backing file name
|
|
#
|
|
# @backing-file: #optional The backing file string to write into the active
|
|
# layer. This filename is not validated.
|
|
#
|
|
# If a pathname string is such that it cannot be
|
|
# resolved by QEMU, that means that subsequent QMP or
|
|
# HMP commands must use node-names for the image in
|
|
# question, as filename lookup methods will fail.
|
|
#
|
|
# If not specified, QEMU will automatically determine
|
|
# the backing file string to use, or error out if there
|
|
# is no obvious choice. Care should be taken when
|
|
# specifying the string, to specify a valid filename or
|
|
# protocol.
|
|
# (Since 2.1)
|
|
#
|
|
# @speed: #optional the maximum speed, in bytes per second
|
|
#
|
|
# @on-error: #optional the action to take on an error (default report).
|
|
# 'stop' and 'enospc' can only be used if the block device
|
|
# supports io-status (see BlockInfo). Since 1.3.
|
|
#
|
|
# Returns: Nothing on success
|
|
# If @device does not exist, DeviceNotFound
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'block-stream',
|
|
'data': { 'device': 'str', '*base': 'str', '*backing-file': 'str',
|
|
'*speed': 'int', '*on-error': 'BlockdevOnError' } }
|
|
|
|
##
|
|
# @block-job-set-speed:
|
|
#
|
|
# Set maximum speed for a background block operation.
|
|
#
|
|
# This command can only be issued when there is an active block job.
|
|
#
|
|
# Throttling can be disabled by setting the speed to 0.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# @speed: the maximum speed, in bytes per second, or 0 for unlimited.
|
|
# Defaults to 0.
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'block-job-set-speed',
|
|
'data': { 'device': 'str', 'speed': 'int' } }
|
|
|
|
##
|
|
# @block-job-cancel:
|
|
#
|
|
# Stop an active background block operation.
|
|
#
|
|
# This command returns immediately after marking the active background block
|
|
# operation for cancellation. It is an error to call this command if no
|
|
# operation is in progress.
|
|
#
|
|
# The operation will cancel as soon as possible and then emit the
|
|
# BLOCK_JOB_CANCELLED event. Before that happens the job is still visible when
|
|
# enumerated using query-block-jobs.
|
|
#
|
|
# For streaming, the image file retains its backing file unless the streaming
|
|
# operation happens to complete just as it is being cancelled. A new streaming
|
|
# operation can be started at a later time to finish copying all data from the
|
|
# backing file.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# @force: #optional whether to allow cancellation of a paused job (default
|
|
# false). Since 1.3.
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'command': 'block-job-cancel', 'data': { 'device': 'str', '*force': 'bool' } }
|
|
|
|
##
|
|
# @block-job-pause:
|
|
#
|
|
# Pause an active background block operation.
|
|
#
|
|
# This command returns immediately after marking the active background block
|
|
# operation for pausing. It is an error to call this command if no
|
|
# operation is in progress. Pausing an already paused job has no cumulative
|
|
# effect; a single block-job-resume command will resume the job.
|
|
#
|
|
# The operation will pause as soon as possible. No event is emitted when
|
|
# the operation is actually paused. Cancelling a paused job automatically
|
|
# resumes it.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'command': 'block-job-pause', 'data': { 'device': 'str' } }
|
|
|
|
##
|
|
# @block-job-resume:
|
|
#
|
|
# Resume an active background block operation.
|
|
#
|
|
# This command returns immediately after resuming a paused background block
|
|
# operation. It is an error to call this command if no operation is in
|
|
# progress. Resuming an already running job is not an error.
|
|
#
|
|
# This command also clears the error status of the job.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'command': 'block-job-resume', 'data': { 'device': 'str' } }
|
|
|
|
##
|
|
# @block-job-complete:
|
|
#
|
|
# Manually trigger completion of an active background block operation. This
|
|
# is supported for drive mirroring, where it also switches the device to
|
|
# write to the target path only. The ability to complete is signaled with
|
|
# a BLOCK_JOB_READY event.
|
|
#
|
|
# This command completes an active background block operation synchronously.
|
|
# The ordering of this command's return with the BLOCK_JOB_COMPLETED event
|
|
# is not defined. Note that if an I/O error occurs during the processing of
|
|
# this command: 1) the command itself will fail; 2) the error will be processed
|
|
# according to the rerror/werror arguments that were specified when starting
|
|
# the operation.
|
|
#
|
|
# A cancelled or paused job cannot be completed.
|
|
#
|
|
# @device: the device name
|
|
#
|
|
# Returns: Nothing on success
|
|
# If no background operation is active on this device, DeviceNotActive
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'command': 'block-job-complete', 'data': { 'device': 'str' } }
|
|
|
|
##
|
|
# @BlockdevDiscardOptions
|
|
#
|
|
# Determines how to handle discard requests.
|
|
#
|
|
# @ignore: Ignore the request
|
|
# @unmap: Forward as an unmap request
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'enum': 'BlockdevDiscardOptions',
|
|
'data': [ 'ignore', 'unmap' ] }
|
|
|
|
##
|
|
# @BlockdevDetectZeroesOptions
|
|
#
|
|
# Describes the operation mode for the automatic conversion of plain
|
|
# zero writes by the OS to driver specific optimized zero write commands.
|
|
#
|
|
# @off: Disabled (default)
|
|
# @on: Enabled
|
|
# @unmap: Enabled and even try to unmap blocks if possible. This requires
|
|
# also that @BlockdevDiscardOptions is set to unmap for this device.
|
|
#
|
|
# Since: 2.1
|
|
##
|
|
{ 'enum': 'BlockdevDetectZeroesOptions',
|
|
'data': [ 'off', 'on', 'unmap' ] }
|
|
|
|
##
|
|
# @BlockdevAioOptions
|
|
#
|
|
# Selects the AIO backend to handle I/O requests
|
|
#
|
|
# @threads: Use qemu's thread pool
|
|
# @native: Use native AIO backend (only Linux and Windows)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'enum': 'BlockdevAioOptions',
|
|
'data': [ 'threads', 'native' ] }
|
|
|
|
##
|
|
# @BlockdevCacheOptions
|
|
#
|
|
# Includes cache-related options for block devices
|
|
#
|
|
# @writeback: #optional enables writeback mode for any caches (default: true)
|
|
# @direct: #optional enables use of O_DIRECT (bypass the host page cache;
|
|
# default: false)
|
|
# @no-flush: #optional ignore any flush requests for the device (default:
|
|
# false)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'BlockdevCacheOptions',
|
|
'data': { '*writeback': 'bool',
|
|
'*direct': 'bool',
|
|
'*no-flush': 'bool' } }
|
|
|
|
##
|
|
# @BlockdevDriver
|
|
#
|
|
# Drivers that are supported in block device operations.
|
|
#
|
|
# @host_device, @host_cdrom, @host_floppy: Since 2.1
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'enum': 'BlockdevDriver',
|
|
'data': [ 'archipelago', 'blkdebug', 'blkverify', 'bochs', 'cloop',
|
|
'dmg', 'file', 'ftp', 'ftps', 'host_cdrom', 'host_device',
|
|
'host_floppy', 'http', 'https', 'null-aio', 'null-co', 'parallels',
|
|
'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'tftp', 'vdi', 'vhdx',
|
|
'vmdk', 'vpc', 'vvfat' ] }
|
|
|
|
##
|
|
# @BlockdevOptionsBase
|
|
#
|
|
# Options that are available for all block devices, independent of the block
|
|
# driver.
|
|
#
|
|
# @driver: block driver name
|
|
# @id: #optional id by which the new block device can be referred to.
|
|
# This is a required option on the top level of blockdev-add, and
|
|
# currently not allowed on any other level.
|
|
# @node-name: #optional the name of a block driver state node (Since 2.0)
|
|
# @discard: #optional discard-related options (default: ignore)
|
|
# @cache: #optional cache-related options
|
|
# @aio: #optional AIO backend (default: threads)
|
|
# @rerror: #optional how to handle read errors on the device
|
|
# (default: report)
|
|
# @werror: #optional how to handle write errors on the device
|
|
# (default: enospc)
|
|
# @read-only: #optional whether the block device should be read-only
|
|
# (default: false)
|
|
# @detect-zeroes: #optional detect and optimize zero writes (Since 2.1)
|
|
# (default: off)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'BlockdevOptionsBase',
|
|
'data': { 'driver': 'BlockdevDriver',
|
|
'*id': 'str',
|
|
'*node-name': 'str',
|
|
'*discard': 'BlockdevDiscardOptions',
|
|
'*cache': 'BlockdevCacheOptions',
|
|
'*aio': 'BlockdevAioOptions',
|
|
'*rerror': 'BlockdevOnError',
|
|
'*werror': 'BlockdevOnError',
|
|
'*read-only': 'bool',
|
|
'*detect-zeroes': 'BlockdevDetectZeroesOptions' } }
|
|
|
|
##
|
|
# @BlockdevOptionsFile
|
|
#
|
|
# Driver specific block device options for the file backend and similar
|
|
# protocols.
|
|
#
|
|
# @filename: path to the image file
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'BlockdevOptionsFile',
|
|
'data': { 'filename': 'str' } }
|
|
|
|
##
|
|
# @BlockdevOptionsNull
|
|
#
|
|
# Driver specific block device options for the null backend.
|
|
#
|
|
# @size: #optional size of the device in bytes.
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'type': 'BlockdevOptionsNull',
|
|
'data': { '*size': 'int' } }
|
|
|
|
##
|
|
# @BlockdevOptionsVVFAT
|
|
#
|
|
# Driver specific block device options for the vvfat protocol.
|
|
#
|
|
# @dir: directory to be exported as FAT image
|
|
# @fat-type: #optional FAT type: 12, 16 or 32
|
|
# @floppy: #optional whether to export a floppy image (true) or
|
|
# partitioned hard disk (false; default)
|
|
# @rw: #optional whether to allow write operations (default: false)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'BlockdevOptionsVVFAT',
|
|
'data': { 'dir': 'str', '*fat-type': 'int', '*floppy': 'bool',
|
|
'*rw': 'bool' } }
|
|
|
|
##
|
|
# @BlockdevOptionsGenericFormat
|
|
#
|
|
# Driver specific block device options for image format that have no option
|
|
# besides their data source.
|
|
#
|
|
# @file: reference to or definition of the data source block device
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'BlockdevOptionsGenericFormat',
|
|
'data': { 'file': 'BlockdevRef' } }
|
|
|
|
##
|
|
# @BlockdevOptionsGenericCOWFormat
|
|
#
|
|
# Driver specific block device options for image format that have no option
|
|
# besides their data source and an optional backing file.
|
|
#
|
|
# @backing: #optional reference to or definition of the backing file block
|
|
# device (if missing, taken from the image file content). It is
|
|
# allowed to pass an empty string here in order to disable the
|
|
# default backing file.
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'BlockdevOptionsGenericCOWFormat',
|
|
'base': 'BlockdevOptionsGenericFormat',
|
|
'data': { '*backing': 'BlockdevRef' } }
|
|
|
|
##
|
|
# @Qcow2OverlapCheckMode
|
|
#
|
|
# General overlap check modes.
|
|
#
|
|
# @none: Do not perform any checks
|
|
#
|
|
# @constant: Perform only checks which can be done in constant time and
|
|
# without reading anything from disk
|
|
#
|
|
# @cached: Perform only checks which can be done without reading anything
|
|
# from disk
|
|
#
|
|
# @all: Perform all available overlap checks
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'enum': 'Qcow2OverlapCheckMode',
|
|
'data': [ 'none', 'constant', 'cached', 'all' ] }
|
|
|
|
##
|
|
# @Qcow2OverlapCheckFlags
|
|
#
|
|
# Structure of flags for each metadata structure. Setting a field to 'true'
|
|
# makes qemu guard that structure against unintended overwriting. The default
|
|
# value is chosen according to the template given.
|
|
#
|
|
# @template: Specifies a template mode which can be adjusted using the other
|
|
# flags, defaults to 'cached'
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'type': 'Qcow2OverlapCheckFlags',
|
|
'data': { '*template': 'Qcow2OverlapCheckMode',
|
|
'*main-header': 'bool',
|
|
'*active-l1': 'bool',
|
|
'*active-l2': 'bool',
|
|
'*refcount-table': 'bool',
|
|
'*refcount-block': 'bool',
|
|
'*snapshot-table': 'bool',
|
|
'*inactive-l1': 'bool',
|
|
'*inactive-l2': 'bool' } }
|
|
|
|
##
|
|
# @Qcow2OverlapChecks
|
|
#
|
|
# Specifies which metadata structures should be guarded against unintended
|
|
# overwriting.
|
|
#
|
|
# @flags: set of flags for separate specification of each metadata structure
|
|
# type
|
|
#
|
|
# @mode: named mode which chooses a specific set of flags
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'union': 'Qcow2OverlapChecks',
|
|
'discriminator': {},
|
|
'data': { 'flags': 'Qcow2OverlapCheckFlags',
|
|
'mode': 'Qcow2OverlapCheckMode' } }
|
|
|
|
##
|
|
# @BlockdevOptionsQcow2
|
|
#
|
|
# Driver specific block device options for qcow2.
|
|
#
|
|
# @lazy-refcounts: #optional whether to enable the lazy refcounts
|
|
# feature (default is taken from the image file)
|
|
#
|
|
# @pass-discard-request: #optional whether discard requests to the qcow2
|
|
# device should be forwarded to the data source
|
|
#
|
|
# @pass-discard-snapshot: #optional whether discard requests for the data source
|
|
# should be issued when a snapshot operation (e.g.
|
|
# deleting a snapshot) frees clusters in the qcow2 file
|
|
#
|
|
# @pass-discard-other: #optional whether discard requests for the data source
|
|
# should be issued on other occasions where a cluster
|
|
# gets freed
|
|
#
|
|
# @overlap-check: #optional which overlap checks to perform for writes
|
|
# to the image, defaults to 'cached' (since 2.2)
|
|
#
|
|
# @cache-size: #optional the maximum total size of the L2 table and
|
|
# refcount block caches in bytes (since 2.2)
|
|
#
|
|
# @l2-cache-size: #optional the maximum size of the L2 table cache in
|
|
# bytes (since 2.2)
|
|
#
|
|
# @refcount-cache-size: #optional the maximum size of the refcount block cache
|
|
# in bytes (since 2.2)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'type': 'BlockdevOptionsQcow2',
|
|
'base': 'BlockdevOptionsGenericCOWFormat',
|
|
'data': { '*lazy-refcounts': 'bool',
|
|
'*pass-discard-request': 'bool',
|
|
'*pass-discard-snapshot': 'bool',
|
|
'*pass-discard-other': 'bool',
|
|
'*overlap-check': 'Qcow2OverlapChecks',
|
|
'*cache-size': 'int',
|
|
'*l2-cache-size': 'int',
|
|
'*refcount-cache-size': 'int' } }
|
|
|
|
|
|
##
|
|
# @BlockdevOptionsArchipelago
|
|
#
|
|
# Driver specific block device options for Archipelago.
|
|
#
|
|
# @volume: Name of the Archipelago volume image
|
|
#
|
|
# @mport: #optional The port number on which mapperd is
|
|
# listening. This is optional
|
|
# and if not specified, QEMU will make Archipelago
|
|
# use the default port (1001).
|
|
#
|
|
# @vport: #optional The port number on which vlmcd is
|
|
# listening. This is optional
|
|
# and if not specified, QEMU will make Archipelago
|
|
# use the default port (501).
|
|
#
|
|
# @segment: #optional The name of the shared memory segment
|
|
# Archipelago stack is using. This is optional
|
|
# and if not specified, QEMU will make Archipelago
|
|
# use the default value, 'archipelago'.
|
|
# Since: 2.2
|
|
##
|
|
{ 'type': 'BlockdevOptionsArchipelago',
|
|
'data': { 'volume': 'str',
|
|
'*mport': 'int',
|
|
'*vport': 'int',
|
|
'*segment': 'str' } }
|
|
|
|
|
|
##
|
|
# @BlkdebugEvent
|
|
#
|
|
# Trigger events supported by blkdebug.
|
|
##
|
|
{ 'enum': 'BlkdebugEvent',
|
|
'data': [ 'l1_update', 'l1_grow.alloc_table', 'l1_grow.write_table',
|
|
'l1_grow.activate_table', 'l2_load', 'l2_update',
|
|
'l2_update_compressed', 'l2_alloc.cow_read', 'l2_alloc.write',
|
|
'read_aio', 'read_backing_aio', 'read_compressed', 'write_aio',
|
|
'write_compressed', 'vmstate_load', 'vmstate_save', 'cow_read',
|
|
'cow_write', 'reftable_load', 'reftable_grow', 'reftable_update',
|
|
'refblock_load', 'refblock_update', 'refblock_update_part',
|
|
'refblock_alloc', 'refblock_alloc.hookup', 'refblock_alloc.write',
|
|
'refblock_alloc.write_blocks', 'refblock_alloc.write_table',
|
|
'refblock_alloc.switch_table', 'cluster_alloc',
|
|
'cluster_alloc_bytes', 'cluster_free', 'flush_to_os',
|
|
'flush_to_disk' ] }
|
|
|
|
##
|
|
# @BlkdebugInjectErrorOptions
|
|
#
|
|
# Describes a single error injection for blkdebug.
|
|
#
|
|
# @event: trigger event
|
|
#
|
|
# @state: #optional the state identifier blkdebug needs to be in to
|
|
# actually trigger the event; defaults to "any"
|
|
#
|
|
# @errno: #optional error identifier (errno) to be returned; defaults to
|
|
# EIO
|
|
#
|
|
# @sector: #optional specifies the sector index which has to be affected
|
|
# in order to actually trigger the event; defaults to "any
|
|
# sector"
|
|
#
|
|
# @once: #optional disables further events after this one has been
|
|
# triggered; defaults to false
|
|
#
|
|
# @immediately: #optional fail immediately; defaults to false
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'type': 'BlkdebugInjectErrorOptions',
|
|
'data': { 'event': 'BlkdebugEvent',
|
|
'*state': 'int',
|
|
'*errno': 'int',
|
|
'*sector': 'int',
|
|
'*once': 'bool',
|
|
'*immediately': 'bool' } }
|
|
|
|
##
|
|
# @BlkdebugSetStateOptions
|
|
#
|
|
# Describes a single state-change event for blkdebug.
|
|
#
|
|
# @event: trigger event
|
|
#
|
|
# @state: #optional the current state identifier blkdebug needs to be in;
|
|
# defaults to "any"
|
|
#
|
|
# @new_state: the state identifier blkdebug is supposed to assume if
|
|
# this event is triggered
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'type': 'BlkdebugSetStateOptions',
|
|
'data': { 'event': 'BlkdebugEvent',
|
|
'*state': 'int',
|
|
'new_state': 'int' } }
|
|
|
|
##
|
|
# @BlockdevOptionsBlkdebug
|
|
#
|
|
# Driver specific block device options for blkdebug.
|
|
#
|
|
# @image: underlying raw block device (or image file)
|
|
#
|
|
# @config: #optional filename of the configuration file
|
|
#
|
|
# @align: #optional required alignment for requests in bytes
|
|
#
|
|
# @inject-error: #optional array of error injection descriptions
|
|
#
|
|
# @set-state: #optional array of state-change descriptions
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'type': 'BlockdevOptionsBlkdebug',
|
|
'data': { 'image': 'BlockdevRef',
|
|
'*config': 'str',
|
|
'*align': 'int',
|
|
'*inject-error': ['BlkdebugInjectErrorOptions'],
|
|
'*set-state': ['BlkdebugSetStateOptions'] } }
|
|
|
|
##
|
|
# @BlockdevOptionsBlkverify
|
|
#
|
|
# Driver specific block device options for blkverify.
|
|
#
|
|
# @test: block device to be tested
|
|
#
|
|
# @raw: raw image used for verification
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'type': 'BlockdevOptionsBlkverify',
|
|
'data': { 'test': 'BlockdevRef',
|
|
'raw': 'BlockdevRef' } }
|
|
|
|
##
|
|
# @QuorumReadPattern
|
|
#
|
|
# An enumeration of quorum read patterns.
|
|
#
|
|
# @quorum: read all the children and do a quorum vote on reads
|
|
#
|
|
# @fifo: read only from the first child that has not failed
|
|
#
|
|
# Since: 2.2
|
|
##
|
|
{ 'enum': 'QuorumReadPattern', 'data': [ 'quorum', 'fifo' ] }
|
|
|
|
##
|
|
# @BlockdevOptionsQuorum
|
|
#
|
|
# Driver specific block device options for Quorum
|
|
#
|
|
# @blkverify: #optional true if the driver must print content mismatch
|
|
# set to false by default
|
|
#
|
|
# @children: the children block devices to use
|
|
#
|
|
# @vote-threshold: the vote limit under which a read will fail
|
|
#
|
|
# @rewrite-corrupted: #optional rewrite corrupted data when quorum is reached
|
|
# (Since 2.1)
|
|
#
|
|
# @read-pattern: #optional choose read pattern and set to quorum by default
|
|
# (Since 2.2)
|
|
#
|
|
# Since: 2.0
|
|
##
|
|
{ 'type': 'BlockdevOptionsQuorum',
|
|
'data': { '*blkverify': 'bool',
|
|
'children': [ 'BlockdevRef' ],
|
|
'vote-threshold': 'int',
|
|
'*rewrite-corrupted': 'bool',
|
|
'*read-pattern': 'QuorumReadPattern' } }
|
|
|
|
##
|
|
# @BlockdevOptions
|
|
#
|
|
# Options for creating a block device.
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'union': 'BlockdevOptions',
|
|
'base': 'BlockdevOptionsBase',
|
|
'discriminator': 'driver',
|
|
'data': {
|
|
'archipelago':'BlockdevOptionsArchipelago',
|
|
'blkdebug': 'BlockdevOptionsBlkdebug',
|
|
'blkverify': 'BlockdevOptionsBlkverify',
|
|
'bochs': 'BlockdevOptionsGenericFormat',
|
|
'cloop': 'BlockdevOptionsGenericFormat',
|
|
'dmg': 'BlockdevOptionsGenericFormat',
|
|
'file': 'BlockdevOptionsFile',
|
|
'ftp': 'BlockdevOptionsFile',
|
|
'ftps': 'BlockdevOptionsFile',
|
|
# TODO gluster: Wait for structured options
|
|
'host_cdrom': 'BlockdevOptionsFile',
|
|
'host_device':'BlockdevOptionsFile',
|
|
'host_floppy':'BlockdevOptionsFile',
|
|
'http': 'BlockdevOptionsFile',
|
|
'https': 'BlockdevOptionsFile',
|
|
# TODO iscsi: Wait for structured options
|
|
# TODO nbd: Should take InetSocketAddress for 'host'?
|
|
# TODO nfs: Wait for structured options
|
|
'null-aio': 'BlockdevOptionsNull',
|
|
'null-co': 'BlockdevOptionsNull',
|
|
'parallels': 'BlockdevOptionsGenericFormat',
|
|
'qcow2': 'BlockdevOptionsQcow2',
|
|
'qcow': 'BlockdevOptionsGenericCOWFormat',
|
|
'qed': 'BlockdevOptionsGenericCOWFormat',
|
|
'quorum': 'BlockdevOptionsQuorum',
|
|
'raw': 'BlockdevOptionsGenericFormat',
|
|
# TODO rbd: Wait for structured options
|
|
# TODO sheepdog: Wait for structured options
|
|
# TODO ssh: Should take InetSocketAddress for 'host'?
|
|
'tftp': 'BlockdevOptionsFile',
|
|
'vdi': 'BlockdevOptionsGenericFormat',
|
|
'vhdx': 'BlockdevOptionsGenericFormat',
|
|
'vmdk': 'BlockdevOptionsGenericCOWFormat',
|
|
'vpc': 'BlockdevOptionsGenericFormat',
|
|
'vvfat': 'BlockdevOptionsVVFAT'
|
|
} }
|
|
|
|
##
|
|
# @BlockdevRef
|
|
#
|
|
# Reference to a block device.
|
|
#
|
|
# @definition: defines a new block device inline
|
|
# @reference: references the ID of an existing block device. An
|
|
# empty string means that no block device should be
|
|
# referenced.
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'union': 'BlockdevRef',
|
|
'discriminator': {},
|
|
'data': { 'definition': 'BlockdevOptions',
|
|
'reference': 'str' } }
|
|
|
|
##
|
|
# @blockdev-add:
|
|
#
|
|
# Creates a new block device.
|
|
#
|
|
# @options: block device options for the new device
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'command': 'blockdev-add', 'data': { 'options': 'BlockdevOptions' } }
|
|
|
|
|
|
##
|
|
# @BlockErrorAction
|
|
#
|
|
# An enumeration of action that has been taken when a DISK I/O occurs
|
|
#
|
|
# @ignore: error has been ignored
|
|
#
|
|
# @report: error has been reported to the device
|
|
#
|
|
# @stop: error caused VM to be stopped
|
|
#
|
|
# Since: 2.1
|
|
##
|
|
{ 'enum': 'BlockErrorAction',
|
|
'data': [ 'ignore', 'report', 'stop' ] }
|
|
|
|
|
|
##
|
|
# @BLOCK_IMAGE_CORRUPTED
|
|
#
|
|
# Emitted when a corruption has been detected in a disk image
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @msg: informative message for human consumption, such as the kind of
|
|
# corruption being detected. It should not be parsed by machine as it is
|
|
# not guaranteed to be stable
|
|
#
|
|
# @offset: #optional, if the corruption resulted from an image access, this is
|
|
# the access offset into the image
|
|
#
|
|
# @size: #optional, if the corruption resulted from an image access, this is
|
|
# the access size
|
|
#
|
|
# fatal: if set, the image is marked corrupt and therefore unusable after this
|
|
# event and must be repaired (Since 2.2; before, every
|
|
# BLOCK_IMAGE_CORRUPTED event was fatal)
|
|
#
|
|
# Since: 1.7
|
|
##
|
|
{ 'event': 'BLOCK_IMAGE_CORRUPTED',
|
|
'data': { 'device' : 'str',
|
|
'msg' : 'str',
|
|
'*offset': 'int',
|
|
'*size' : 'int',
|
|
'fatal' : 'bool' } }
|
|
|
|
##
|
|
# @BLOCK_IO_ERROR
|
|
#
|
|
# Emitted when a disk I/O error occurs
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @operation: I/O operation
|
|
#
|
|
# @action: action that has been taken
|
|
#
|
|
# @nospace: #optional true if I/O error was caused due to a no-space
|
|
# condition. This key is only present if query-block's
|
|
# io-status is present, please see query-block documentation
|
|
# for more information (since: 2.2)
|
|
#
|
|
# @reason: human readable string describing the error cause.
|
|
# (This field is a debugging aid for humans, it should not
|
|
# be parsed by applications) (since: 2.2)
|
|
#
|
|
# Note: If action is "stop", a STOP event will eventually follow the
|
|
# BLOCK_IO_ERROR event
|
|
#
|
|
# Since: 0.13.0
|
|
##
|
|
{ 'event': 'BLOCK_IO_ERROR',
|
|
'data': { 'device': 'str', 'operation': 'IoOperationType',
|
|
'action': 'BlockErrorAction', '*nospace': 'bool',
|
|
'reason': 'str' } }
|
|
|
|
##
|
|
# @BLOCK_JOB_COMPLETED
|
|
#
|
|
# Emitted when a block job has completed
|
|
#
|
|
# @type: job type
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @len: maximum progress value
|
|
#
|
|
# @offset: current progress value. On success this is equal to len.
|
|
# On failure this is less than len
|
|
#
|
|
# @speed: rate limit, bytes per second
|
|
#
|
|
# @error: #optional, error message. Only present on failure. This field
|
|
# contains a human-readable error message. There are no semantics
|
|
# other than that streaming has failed and clients should not try to
|
|
# interpret the error string
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'event': 'BLOCK_JOB_COMPLETED',
|
|
'data': { 'type' : 'BlockJobType',
|
|
'device': 'str',
|
|
'len' : 'int',
|
|
'offset': 'int',
|
|
'speed' : 'int',
|
|
'*error': 'str' } }
|
|
|
|
##
|
|
# @BLOCK_JOB_CANCELLED
|
|
#
|
|
# Emitted when a block job has been cancelled
|
|
#
|
|
# @type: job type
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @len: maximum progress value
|
|
#
|
|
# @offset: current progress value. On success this is equal to len.
|
|
# On failure this is less than len
|
|
#
|
|
# @speed: rate limit, bytes per second
|
|
#
|
|
# Since: 1.1
|
|
##
|
|
{ 'event': 'BLOCK_JOB_CANCELLED',
|
|
'data': { 'type' : 'BlockJobType',
|
|
'device': 'str',
|
|
'len' : 'int',
|
|
'offset': 'int',
|
|
'speed' : 'int' } }
|
|
|
|
##
|
|
# @BLOCK_JOB_ERROR
|
|
#
|
|
# Emitted when a block job encounters an error
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @operation: I/O operation
|
|
#
|
|
# @action: action that has been taken
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'event': 'BLOCK_JOB_ERROR',
|
|
'data': { 'device' : 'str',
|
|
'operation': 'IoOperationType',
|
|
'action' : 'BlockErrorAction' } }
|
|
|
|
##
|
|
# @BLOCK_JOB_READY
|
|
#
|
|
# Emitted when a block job is ready to complete
|
|
#
|
|
# @type: job type
|
|
#
|
|
# @device: device name
|
|
#
|
|
# @len: maximum progress value
|
|
#
|
|
# @offset: current progress value. On success this is equal to len.
|
|
# On failure this is less than len
|
|
#
|
|
# @speed: rate limit, bytes per second
|
|
#
|
|
# Note: The "ready to complete" status is always reset by a @BLOCK_JOB_ERROR
|
|
# event
|
|
#
|
|
# Since: 1.3
|
|
##
|
|
{ 'event': 'BLOCK_JOB_READY',
|
|
'data': { 'type' : 'BlockJobType',
|
|
'device': 'str',
|
|
'len' : 'int',
|
|
'offset': 'int',
|
|
'speed' : 'int' } }
|
|
|
|
# @PreallocMode
|
|
#
|
|
# Preallocation mode of QEMU image file
|
|
#
|
|
# @off: no preallocation
|
|
# @metadata: preallocate only for metadata
|
|
# @falloc: like @full preallocation but allocate disk space by
|
|
# posix_fallocate() rather than writing zeros.
|
|
# @full: preallocate all data by writing zeros to device to ensure disk
|
|
# space is really available. @full preallocation also sets up
|
|
# metadata correctly.
|
|
#
|
|
# Since 2.2
|
|
##
|
|
{ 'enum': 'PreallocMode',
|
|
'data': [ 'off', 'metadata', 'falloc', 'full' ] }
|