2d8f048c25
The Nuvoton NPCM7xx SoC family are used to implement Baseboard Management Controllers in servers. While the family includes four SoCs, this patch implements limited support for two of them: NPCM730 (targeted for Data Center applications) and NPCM750 (targeted for Enterprise applications). This patch includes little more than the bare minimum needed to boot a Linux kernel built with NPCM7xx support in direct-kernel mode: - Two Cortex-A9 CPU cores with built-in periperhals. - Global Configuration Registers. - Clock Management. - 3 Timer Modules with 5 timers each. - 4 serial ports. The chips themselves have a lot more features, some of which will be added to the model at a later stage. Reviewed-by: Tyrone Ting <kfting@nuvoton.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Alexander Bulekov <alxndr@bu.edu> Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com> Message-id: 20200911052101.2602693-5-hskinnemoen@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
61 lines
3.9 KiB
Meson
61 lines
3.9 KiB
Meson
arm_ss = ss.source_set()
|
|
arm_ss.add(files('boot.c'), fdt)
|
|
arm_ss.add(when: 'CONFIG_PLATFORM_BUS', if_true: files('sysbus-fdt.c'))
|
|
arm_ss.add(when: 'CONFIG_ARM_VIRT', if_true: files('virt.c'))
|
|
arm_ss.add(when: 'CONFIG_ACPI', if_true: files('virt-acpi-build.c'))
|
|
arm_ss.add(when: 'CONFIG_DIGIC', if_true: files('digic_boards.c'))
|
|
arm_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4_boards.c'))
|
|
arm_ss.add(when: 'CONFIG_EMCRAFT_SF2', if_true: files('msf2-som.c'))
|
|
arm_ss.add(when: 'CONFIG_HIGHBANK', if_true: files('highbank.c'))
|
|
arm_ss.add(when: 'CONFIG_INTEGRATOR', if_true: files('integratorcp.c'))
|
|
arm_ss.add(when: 'CONFIG_MAINSTONE', if_true: files('mainstone.c'))
|
|
arm_ss.add(when: 'CONFIG_MICROBIT', if_true: files('microbit.c'))
|
|
arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c'))
|
|
arm_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c'))
|
|
arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c'))
|
|
arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c'))
|
|
arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c'))
|
|
arm_ss.add(when: 'CONFIG_SX1', if_true: files('omap_sx1.c'))
|
|
arm_ss.add(when: 'CONFIG_CHEETAH', if_true: files('palm.c'))
|
|
arm_ss.add(when: 'CONFIG_GUMSTIX', if_true: files('gumstix.c'))
|
|
arm_ss.add(when: 'CONFIG_SPITZ', if_true: files('spitz.c'))
|
|
arm_ss.add(when: 'CONFIG_TOSA', if_true: files('tosa.c'))
|
|
arm_ss.add(when: 'CONFIG_Z2', if_true: files('z2.c'))
|
|
arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c'))
|
|
arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c'))
|
|
arm_ss.add(when: 'CONFIG_STELLARIS', if_true: files('stellaris.c'))
|
|
arm_ss.add(when: 'CONFIG_COLLIE', if_true: files('collie.c'))
|
|
arm_ss.add(when: 'CONFIG_VERSATILE', if_true: files('versatilepb.c'))
|
|
arm_ss.add(when: 'CONFIG_VEXPRESS', if_true: files('vexpress.c'))
|
|
arm_ss.add(when: 'CONFIG_ZYNQ', if_true: files('xilinx_zynq.c'))
|
|
arm_ss.add(when: 'CONFIG_SABRELITE', if_true: files('sabrelite.c'))
|
|
|
|
arm_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m.c'))
|
|
arm_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210.c'))
|
|
arm_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx.c', 'pxa2xx_gpio.c', 'pxa2xx_pic.c'))
|
|
arm_ss.add(when: 'CONFIG_DIGIC', if_true: files('digic.c'))
|
|
arm_ss.add(when: 'CONFIG_OMAP', if_true: files('omap1.c', 'omap2.c'))
|
|
arm_ss.add(when: 'CONFIG_STRONGARM', if_true: files('strongarm.c'))
|
|
arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubieboard.c'))
|
|
arm_ss.add(when: 'CONFIG_ALLWINNER_H3', if_true: files('allwinner-h3.c', 'orangepi.c'))
|
|
arm_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_peripherals.c', 'bcm2836.c', 'raspi.c'))
|
|
arm_ss.add(when: 'CONFIG_STM32F205_SOC', if_true: files('stm32f205_soc.c'))
|
|
arm_ss.add(when: 'CONFIG_STM32F405_SOC', if_true: files('stm32f405_soc.c'))
|
|
arm_ss.add(when: 'CONFIG_XLNX_ZYNQMP_ARM', if_true: files('xlnx-zynqmp.c', 'xlnx-zcu102.c'))
|
|
arm_ss.add(when: 'CONFIG_XLNX_VERSAL', if_true: files('xlnx-versal.c', 'xlnx-versal-virt.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX25', if_true: files('fsl-imx25.c', 'imx25_pdk.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX31', if_true: files('fsl-imx31.c', 'kzm.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX6', if_true: files('fsl-imx6.c'))
|
|
arm_ss.add(when: 'CONFIG_ASPEED_SOC', if_true: files('aspeed_soc.c', 'aspeed.c', 'aspeed_ast2600.c'))
|
|
arm_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2.c'))
|
|
arm_ss.add(when: 'CONFIG_MPS2', if_true: files('mps2-tz.c'))
|
|
arm_ss.add(when: 'CONFIG_MSF2', if_true: files('msf2-soc.c'))
|
|
arm_ss.add(when: 'CONFIG_MUSCA', if_true: files('musca.c'))
|
|
arm_ss.add(when: 'CONFIG_ARMSSE', if_true: files('armsse.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX7', if_true: files('fsl-imx7.c', 'mcimx7d-sabre.c'))
|
|
arm_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmu-common.c', 'smmuv3.c'))
|
|
arm_ss.add(when: 'CONFIG_FSL_IMX6UL', if_true: files('fsl-imx6ul.c', 'mcimx6ul-evk.c'))
|
|
arm_ss.add(when: 'CONFIG_NRF51_SOC', if_true: files('nrf51_soc.c'))
|
|
|
|
hw_arch += {'arm': arm_ss}
|