qemu-patch-raspberry4/hw/ide/piix.c
Juan Quintela 4c3df0ecc2 ide: split cmd646 and piix from pci.c
This patch splits cmd646 specific code from pci.c.
This patch splits piix4 specific code from pci.c.
And compile new piix.o and cmd646.o when they are needed.
The only change that is not code movemet is removal of cmd646 specific parts
in bmdma_readb/writeb for piix.

Patchworks-ID: 35301
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-12 09:42:30 -05:00

199 lines
5.9 KiB
C

/*
* QEMU IDE Emulation: PCI PIIX3/4 support.
*
* Copyright (c) 2003 Fabrice Bellard
* Copyright (c) 2006 Openedhand Ltd.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include <hw/hw.h>
#include <hw/pc.h>
#include <hw/pci.h>
#include <hw/isa.h>
#include "block.h"
#include "block_int.h"
#include "sysemu.h"
#include "dma.h"
#include <hw/ide/pci.h>
static uint32_t bmdma_readb(void *opaque, uint32_t addr)
{
BMDMAState *bm = opaque;
uint32_t val;
switch(addr & 3) {
case 0:
val = bm->cmd;
break;
case 2:
val = bm->status;
break;
default:
val = 0xff;
break;
}
#ifdef DEBUG_IDE
printf("bmdma: readb 0x%02x : 0x%02x\n", addr, val);
#endif
return val;
}
static void bmdma_writeb(void *opaque, uint32_t addr, uint32_t val)
{
BMDMAState *bm = opaque;
#ifdef DEBUG_IDE
printf("bmdma: writeb 0x%02x : 0x%02x\n", addr, val);
#endif
switch(addr & 3) {
case 2:
bm->status = (val & 0x60) | (bm->status & 1) | (bm->status & ~val & 0x06);
break;
}
}
static void bmdma_map(PCIDevice *pci_dev, int region_num,
uint32_t addr, uint32_t size, int type)
{
PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, pci_dev);
int i;
for(i = 0;i < 2; i++) {
BMDMAState *bm = &d->bmdma[i];
d->bus[i].bmdma = bm;
bm->pci_dev = DO_UPCAST(PCIIDEState, dev, pci_dev);
bm->bus = d->bus+i;
qemu_add_vm_change_state_handler(ide_dma_restart_cb, bm);
register_ioport_write(addr, 1, 1, bmdma_cmd_writeb, bm);
register_ioport_write(addr + 1, 3, 1, bmdma_writeb, bm);
register_ioport_read(addr, 4, 1, bmdma_readb, bm);
register_ioport_write(addr + 4, 4, 1, bmdma_addr_writeb, bm);
register_ioport_read(addr + 4, 4, 1, bmdma_addr_readb, bm);
register_ioport_write(addr + 4, 4, 2, bmdma_addr_writew, bm);
register_ioport_read(addr + 4, 4, 2, bmdma_addr_readw, bm);
register_ioport_write(addr + 4, 4, 4, bmdma_addr_writel, bm);
register_ioport_read(addr + 4, 4, 4, bmdma_addr_readl, bm);
addr += 8;
}
}
static void piix3_reset(void *opaque)
{
PCIIDEState *d = opaque;
uint8_t *pci_conf = d->dev.config;
int i;
for (i = 0; i < 2; i++)
ide_dma_cancel(&d->bmdma[i]);
pci_conf[0x04] = 0x00;
pci_conf[0x05] = 0x00;
pci_conf[0x06] = 0x80; /* FBC */
pci_conf[0x07] = 0x02; // PCI_status_devsel_medium
pci_conf[0x20] = 0x01; /* BMIBA: 20-23h */
}
static int pci_piix_ide_initfn(PCIIDEState *d)
{
uint8_t *pci_conf = d->dev.config;
pci_conf[0x09] = 0x80; // legacy ATA mode
pci_config_set_class(pci_conf, PCI_CLASS_STORAGE_IDE);
pci_conf[PCI_HEADER_TYPE] = PCI_HEADER_TYPE_NORMAL; // header_type
qemu_register_reset(piix3_reset, d);
piix3_reset(d);
pci_register_bar(&d->dev, 4, 0x10, PCI_ADDRESS_SPACE_IO, bmdma_map);
register_savevm("ide", 0, 3, pci_ide_save, pci_ide_load, d);
ide_bus_new(&d->bus[0], &d->dev.qdev);
ide_bus_new(&d->bus[1], &d->dev.qdev);
ide_init_ioport(&d->bus[0], 0x1f0, 0x3f6);
ide_init_ioport(&d->bus[1], 0x170, 0x376);
ide_init2(&d->bus[0], NULL, NULL, isa_reserve_irq(14));
ide_init2(&d->bus[1], NULL, NULL, isa_reserve_irq(15));
return 0;
}
static int pci_piix3_ide_initfn(PCIDevice *dev)
{
PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
d->type = IDE_TYPE_PIIX3;
pci_config_set_vendor_id(d->dev.config, PCI_VENDOR_ID_INTEL);
pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82371SB_1);
return pci_piix_ide_initfn(d);
}
static int pci_piix4_ide_initfn(PCIDevice *dev)
{
PCIIDEState *d = DO_UPCAST(PCIIDEState, dev, dev);
d->type = IDE_TYPE_PIIX4;
pci_config_set_vendor_id(d->dev.config, PCI_VENDOR_ID_INTEL);
pci_config_set_device_id(d->dev.config, PCI_DEVICE_ID_INTEL_82371AB);
return pci_piix_ide_initfn(d);
}
/* hd_table must contain 4 block drivers */
/* NOTE: for the PIIX3, the IRQs and IOports are hardcoded */
void pci_piix3_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
{
PCIDevice *dev;
dev = pci_create_simple(bus, devfn, "PIIX3 IDE");
pci_ide_create_devs(dev, hd_table);
}
/* hd_table must contain 4 block drivers */
/* NOTE: for the PIIX4, the IRQs and IOports are hardcoded */
void pci_piix4_ide_init(PCIBus *bus, DriveInfo **hd_table, int devfn)
{
PCIDevice *dev;
dev = pci_create_simple(bus, devfn, "PIIX4 IDE");
pci_ide_create_devs(dev, hd_table);
}
static PCIDeviceInfo piix_ide_info[] = {
{
.qdev.name = "PIIX3 IDE",
.qdev.size = sizeof(PCIIDEState),
.init = pci_piix3_ide_initfn,
},{
.qdev.name = "PIIX4 IDE",
.qdev.size = sizeof(PCIIDEState),
.init = pci_piix4_ide_initfn,
},{
/* end of list */
}
};
static void piix_ide_register(void)
{
pci_qdev_register_many(piix_ide_info);
}
device_init(piix_ide_register);