qemu-patch-raspberry4/hw/pci-host
Benjamin Herrenschmidt 4f9924c4d4 ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge
These changes introduces models for the PCIe Host Bridge (PHB4) of the
POWER9 processor. It includes the PowerBus logic interface (PBCQ),
IOMMU support, a single PCIe Gen.4 Root Complex, and support for MSI
and LSI interrupt sources as found on a POWER9 system using the XIVE
interrupt controller.

POWER9 processor comes with 3 PHB4 PEC (PCI Express Controller) and
each PEC can have several PHBs. By default,

  * PEC0 provides 1 PHB  (PHB0)
  * PEC1 provides 2 PHBs (PHB1 and PHB2)
  * PEC2 provides 3 PHBs (PHB3, PHB4 and PHB5)

Each PEC has a set  "global" registers and some "per-stack" (per-PHB)
registers. Those are organized in two XSCOM ranges, the "Nest" range
and the "PCI" range, each range contains both some "PEC" registers and
some "per-stack" registers.

No default device layout is provided and PCI devices can be added on
any of the available PCIe Root Port (pcie.0 .. 2 of a Power9 chip)
with address 0x0 as the firwware (skiboot) only accepts a single
device per root port. To run a simple system with a network and a
storage adapters, use a command line options such as :

  -device e1000e,netdev=net0,mac=C0:FF:EE:00:00:02,bus=pcie.0,addr=0x0
  -netdev bridge,id=net0,helper=/usr/libexec/qemu-bridge-helper,br=virbr0,id=hostnet0

  -device megasas,id=scsi0,bus=pcie.1,addr=0x0
  -drive file=$disk,if=none,id=drive-scsi0-0-0-0,format=qcow2,cache=none
  -device scsi-hd,bus=scsi0.0,channel=0,scsi-id=0,lun=0,drive=drive-scsi0-0-0-0,id=scsi0-0-0-0,bootindex=2

If more are needed, include a bridge.

Multi chip is supported, each chip adding its set of PHB4 controllers
and its PCI busses. The model doesn't emulate the EEH error handling.

This model is not ready for hotplug yet.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[ clg: - numerous cleanups
       - commit log
       - fix for broken LSI support
       - PHB pic printinfo
       - large QOM rework ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20200127144506.11132-2-clg@kaod.org>
[dwg: Use device_class_set_props()]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2020-02-02 14:07:57 +11:00
..
bonito.c hw: replace hw/i386/pc.h with a header just for the i8259 2019-12-17 19:33:49 +01:00
designware.c hw/pci-host/designware: Remove unuseful FALLTHROUGH comment 2020-01-24 20:59:08 +01:00
gpex.c Include hw/qdev-properties.h less 2019-08-16 13:31:53 +02:00
grackle.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
i440fx.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
Kconfig hw/pci-host: Add Kconfig entry to select the IGD Passthrough Host Bridge 2019-12-18 02:34:12 +01:00
Makefile.objs ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge 2020-02-02 14:07:57 +11:00
pam.c Clean up inclusion of sysemu/sysemu.h 2019-08-16 13:31:53 +02:00
pnv_phb4.c ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge 2020-02-02 14:07:57 +11:00
pnv_phb4_pec.c ppc/pnv: Add models for POWER9 PHB4 PCIe Host bridge 2020-02-02 14:07:57 +11:00
ppce500.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
prep.c hw/core/loader: Let load_elf() populate a field with CPU-specific flags 2020-01-29 19:28:52 +01:00
q35.c * Register qdev properties as class properties (Marc-André) 2020-01-27 09:44:04 +00:00
sabre.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
trace-events trace-events: Shorten file names in comments 2019-03-22 16:18:07 +00:00
uninorth.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
versatile.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00
xen_igd_pt.c hw/pci-host/i440fx: Extract the IGD passthrough host bridge device 2019-12-18 02:34:12 +01:00
xilinx-pcie.c qdev: set properties with device_class_set_props() 2020-01-24 20:59:15 +01:00