qemu-patch-raspberry4/hw/timer/altera_timer.c
Peter Maydell b01422622b ptimer: Rename ptimer_init() to ptimer_init_with_bh()
Currently the ptimer design uses a QEMU bottom-half as its
mechanism for calling back into the device model using the
ptimer when the timer has expired. Unfortunately this design
is fatally flawed, because it means that there is a lag
between the ptimer updating its own state and the device
callback function updating device state, and guest accesses
to device registers between the two can return inconsistent
device state.

We want to replace the bottom-half design with one where
the guest device's callback is called either immediately
(when the ptimer triggers by timeout) or when the device
model code closes a transaction-begin/end section (when the
ptimer triggers because the device model changed the
ptimer's count value or other state). As the first step,
rename ptimer_init() to ptimer_init_with_bh(), to free up
the ptimer_init() name for the new API. We can then convert
all the ptimer users away from ptimer_init_with_bh() before
removing it entirely.

(Commit created with
 git grep -l ptimer_init | xargs sed -i -e 's/ptimer_init/ptimer_init_with_bh/'
and three overlong lines folded by hand.)

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191008171740.9679-2-peter.maydell@linaro.org
2019-10-15 18:09:02 +01:00

240 lines
6.1 KiB
C

/*
* QEMU model of the Altera timer.
*
* Copyright (c) 2012 Chris Wulff <crwulff@gmail.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2.1 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see
* <http://www.gnu.org/licenses/lgpl-2.1.html>
*/
#include "qemu/osdep.h"
#include "qemu/main-loop.h"
#include "qemu/module.h"
#include "qapi/error.h"
#include "hw/sysbus.h"
#include "hw/irq.h"
#include "hw/ptimer.h"
#include "hw/qdev-properties.h"
#define R_STATUS 0
#define R_CONTROL 1
#define R_PERIODL 2
#define R_PERIODH 3
#define R_SNAPL 4
#define R_SNAPH 5
#define R_MAX 6
#define STATUS_TO 0x0001
#define STATUS_RUN 0x0002
#define CONTROL_ITO 0x0001
#define CONTROL_CONT 0x0002
#define CONTROL_START 0x0004
#define CONTROL_STOP 0x0008
#define TYPE_ALTERA_TIMER "ALTR.timer"
#define ALTERA_TIMER(obj) \
OBJECT_CHECK(AlteraTimer, (obj), TYPE_ALTERA_TIMER)
typedef struct AlteraTimer {
SysBusDevice busdev;
MemoryRegion mmio;
qemu_irq irq;
uint32_t freq_hz;
QEMUBH *bh;
ptimer_state *ptimer;
uint32_t regs[R_MAX];
} AlteraTimer;
static int timer_irq_state(AlteraTimer *t)
{
bool irq = (t->regs[R_STATUS] & STATUS_TO) &&
(t->regs[R_CONTROL] & CONTROL_ITO);
return irq;
}
static uint64_t timer_read(void *opaque, hwaddr addr,
unsigned int size)
{
AlteraTimer *t = opaque;
uint64_t r = 0;
addr >>= 2;
switch (addr) {
case R_CONTROL:
r = t->regs[R_CONTROL] & (CONTROL_ITO | CONTROL_CONT);
break;
default:
if (addr < ARRAY_SIZE(t->regs)) {
r = t->regs[addr];
}
break;
}
return r;
}
static void timer_write(void *opaque, hwaddr addr,
uint64_t value, unsigned int size)
{
AlteraTimer *t = opaque;
uint64_t tvalue;
uint32_t count = 0;
int irqState = timer_irq_state(t);
addr >>= 2;
switch (addr) {
case R_STATUS:
/* The timeout bit is cleared by writing the status register. */
t->regs[R_STATUS] &= ~STATUS_TO;
break;
case R_CONTROL:
t->regs[R_CONTROL] = value & (CONTROL_ITO | CONTROL_CONT);
if ((value & CONTROL_START) &&
!(t->regs[R_STATUS] & STATUS_RUN)) {
ptimer_run(t->ptimer, 1);
t->regs[R_STATUS] |= STATUS_RUN;
}
if ((value & CONTROL_STOP) && (t->regs[R_STATUS] & STATUS_RUN)) {
ptimer_stop(t->ptimer);
t->regs[R_STATUS] &= ~STATUS_RUN;
}
break;
case R_PERIODL:
case R_PERIODH:
t->regs[addr] = value & 0xFFFF;
if (t->regs[R_STATUS] & STATUS_RUN) {
ptimer_stop(t->ptimer);
t->regs[R_STATUS] &= ~STATUS_RUN;
}
tvalue = (t->regs[R_PERIODH] << 16) | t->regs[R_PERIODL];
ptimer_set_limit(t->ptimer, tvalue + 1, 1);
break;
case R_SNAPL:
case R_SNAPH:
count = ptimer_get_count(t->ptimer);
t->regs[R_SNAPL] = count & 0xFFFF;
t->regs[R_SNAPH] = count >> 16;
break;
default:
break;
}
if (irqState != timer_irq_state(t)) {
qemu_set_irq(t->irq, timer_irq_state(t));
}
}
static const MemoryRegionOps timer_ops = {
.read = timer_read,
.write = timer_write,
.endianness = DEVICE_NATIVE_ENDIAN,
.valid = {
.min_access_size = 1,
.max_access_size = 4
}
};
static void timer_hit(void *opaque)
{
AlteraTimer *t = opaque;
const uint64_t tvalue = (t->regs[R_PERIODH] << 16) | t->regs[R_PERIODL];
t->regs[R_STATUS] |= STATUS_TO;
ptimer_set_limit(t->ptimer, tvalue + 1, 1);
if (!(t->regs[R_CONTROL] & CONTROL_CONT)) {
t->regs[R_STATUS] &= ~STATUS_RUN;
ptimer_set_count(t->ptimer, tvalue);
} else {
ptimer_run(t->ptimer, 1);
}
qemu_set_irq(t->irq, timer_irq_state(t));
}
static void altera_timer_realize(DeviceState *dev, Error **errp)
{
AlteraTimer *t = ALTERA_TIMER(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
if (t->freq_hz == 0) {
error_setg(errp, "\"clock-frequency\" property must be provided.");
return;
}
t->bh = qemu_bh_new(timer_hit, t);
t->ptimer = ptimer_init_with_bh(t->bh, PTIMER_POLICY_DEFAULT);
ptimer_set_freq(t->ptimer, t->freq_hz);
memory_region_init_io(&t->mmio, OBJECT(t), &timer_ops, t,
TYPE_ALTERA_TIMER, R_MAX * sizeof(uint32_t));
sysbus_init_mmio(sbd, &t->mmio);
}
static void altera_timer_init(Object *obj)
{
AlteraTimer *t = ALTERA_TIMER(obj);
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
sysbus_init_irq(sbd, &t->irq);
}
static void altera_timer_reset(DeviceState *dev)
{
AlteraTimer *t = ALTERA_TIMER(dev);
ptimer_stop(t->ptimer);
ptimer_set_limit(t->ptimer, 0xffffffff, 1);
memset(t->regs, 0, sizeof(t->regs));
}
static Property altera_timer_properties[] = {
DEFINE_PROP_UINT32("clock-frequency", AlteraTimer, freq_hz, 0),
DEFINE_PROP_END_OF_LIST(),
};
static void altera_timer_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = altera_timer_realize;
dc->props = altera_timer_properties;
dc->reset = altera_timer_reset;
}
static const TypeInfo altera_timer_info = {
.name = TYPE_ALTERA_TIMER,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(AlteraTimer),
.instance_init = altera_timer_init,
.class_init = altera_timer_class_init,
};
static void altera_timer_register(void)
{
type_register_static(&altera_timer_info);
}
type_init(altera_timer_register)