Currently, blk_is_read_only() tells whether a given BlockBackend can only be used in read-only mode because its root node is read-only. Some callers actually try to answer a slightly different question: Is the BlockBackend configured to be writable, by taking write permissions on the root node? This can differ, for example, for CD-ROM devices which don't take write permissions, but may be backed by a writable image file. scsi-cd allows write requests to the drive if blk_is_read_only() returns false. However, the write request will immediately run into an assertion failure because the write permission is missing. This patch introduces separate functions for both questions. blk_supports_write_perm() answers the question whether the block node/image file can support writable devices, whereas blk_is_writable() tells whether the BlockBackend is currently configured to be writable. All calls of blk_is_read_only() are converted to one of the two new functions. Fixes: https://bugs.launchpad.net/bugs/1906693 Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20210118123448.307825-2-kwolf@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
1024 lines
33 KiB
C
1024 lines
33 KiB
C
/*
|
|
* CFI parallel flash with AMD command set emulation
|
|
*
|
|
* Copyright (c) 2005 Jocelyn Mayer
|
|
*
|
|
* This library is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU Lesser General Public
|
|
* License as published by the Free Software Foundation; either
|
|
* version 2.1 of the License, or (at your option) any later version.
|
|
*
|
|
* This library is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* Lesser General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU Lesser General Public
|
|
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
/*
|
|
* For now, this code can emulate flashes of 1, 2 or 4 bytes width.
|
|
* Supported commands/modes are:
|
|
* - flash read
|
|
* - flash write
|
|
* - flash ID read
|
|
* - sector erase
|
|
* - chip erase
|
|
* - unlock bypass command
|
|
* - CFI queries
|
|
*
|
|
* It does not support flash interleaving.
|
|
* It does not implement software data protection as found in many real chips
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "hw/block/block.h"
|
|
#include "hw/block/flash.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "hw/qdev-properties-system.h"
|
|
#include "qapi/error.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qemu/bitmap.h"
|
|
#include "qemu/timer.h"
|
|
#include "sysemu/block-backend.h"
|
|
#include "qemu/host-utils.h"
|
|
#include "qemu/module.h"
|
|
#include "hw/sysbus.h"
|
|
#include "migration/vmstate.h"
|
|
#include "trace.h"
|
|
|
|
#define PFLASH_DEBUG false
|
|
#define DPRINTF(fmt, ...) \
|
|
do { \
|
|
if (PFLASH_DEBUG) { \
|
|
fprintf(stderr, "PFLASH: " fmt, ## __VA_ARGS__); \
|
|
} \
|
|
} while (0)
|
|
|
|
#define PFLASH_LAZY_ROMD_THRESHOLD 42
|
|
|
|
/*
|
|
* The size of the cfi_table indirectly depends on this and the start of the
|
|
* PRI table directly depends on it. 4 is the maximum size (and also what
|
|
* seems common) without changing the PRT table address.
|
|
*/
|
|
#define PFLASH_MAX_ERASE_REGIONS 4
|
|
|
|
/* Special write cycles for CFI queries. */
|
|
enum {
|
|
WCYCLE_CFI = 7,
|
|
WCYCLE_AUTOSELECT_CFI = 8,
|
|
};
|
|
|
|
struct PFlashCFI02 {
|
|
/*< private >*/
|
|
SysBusDevice parent_obj;
|
|
/*< public >*/
|
|
|
|
BlockBackend *blk;
|
|
uint32_t uniform_nb_blocs;
|
|
uint32_t uniform_sector_len;
|
|
uint32_t total_sectors;
|
|
uint32_t nb_blocs[PFLASH_MAX_ERASE_REGIONS];
|
|
uint32_t sector_len[PFLASH_MAX_ERASE_REGIONS];
|
|
uint32_t chip_len;
|
|
uint8_t mappings;
|
|
uint8_t width;
|
|
uint8_t be;
|
|
int wcycle; /* if 0, the flash is read normally */
|
|
int bypass;
|
|
int ro;
|
|
uint8_t cmd;
|
|
uint8_t status;
|
|
/* FIXME: implement array device properties */
|
|
uint16_t ident0;
|
|
uint16_t ident1;
|
|
uint16_t ident2;
|
|
uint16_t ident3;
|
|
uint16_t unlock_addr0;
|
|
uint16_t unlock_addr1;
|
|
uint8_t cfi_table[0x4d];
|
|
QEMUTimer timer;
|
|
/* The device replicates the flash memory across its memory space. Emulate
|
|
* that by having a container (.mem) filled with an array of aliases
|
|
* (.mem_mappings) pointing to the flash memory (.orig_mem).
|
|
*/
|
|
MemoryRegion mem;
|
|
MemoryRegion *mem_mappings; /* array; one per mapping */
|
|
MemoryRegion orig_mem;
|
|
int rom_mode;
|
|
int read_counter; /* used for lazy switch-back to rom mode */
|
|
int sectors_to_erase;
|
|
uint64_t erase_time_remaining;
|
|
unsigned long *sector_erase_map;
|
|
char *name;
|
|
void *storage;
|
|
};
|
|
|
|
/*
|
|
* Toggle status bit DQ7.
|
|
*/
|
|
static inline void toggle_dq7(PFlashCFI02 *pfl)
|
|
{
|
|
pfl->status ^= 0x80;
|
|
}
|
|
|
|
/*
|
|
* Set status bit DQ7 to bit 7 of value.
|
|
*/
|
|
static inline void set_dq7(PFlashCFI02 *pfl, uint8_t value)
|
|
{
|
|
pfl->status &= 0x7F;
|
|
pfl->status |= value & 0x80;
|
|
}
|
|
|
|
/*
|
|
* Toggle status bit DQ6.
|
|
*/
|
|
static inline void toggle_dq6(PFlashCFI02 *pfl)
|
|
{
|
|
pfl->status ^= 0x40;
|
|
}
|
|
|
|
/*
|
|
* Turn on DQ3.
|
|
*/
|
|
static inline void assert_dq3(PFlashCFI02 *pfl)
|
|
{
|
|
pfl->status |= 0x08;
|
|
}
|
|
|
|
/*
|
|
* Turn off DQ3.
|
|
*/
|
|
static inline void reset_dq3(PFlashCFI02 *pfl)
|
|
{
|
|
pfl->status &= ~0x08;
|
|
}
|
|
|
|
/*
|
|
* Toggle status bit DQ2.
|
|
*/
|
|
static inline void toggle_dq2(PFlashCFI02 *pfl)
|
|
{
|
|
pfl->status ^= 0x04;
|
|
}
|
|
|
|
/*
|
|
* Set up replicated mappings of the same region.
|
|
*/
|
|
static void pflash_setup_mappings(PFlashCFI02 *pfl)
|
|
{
|
|
unsigned i;
|
|
hwaddr size = memory_region_size(&pfl->orig_mem);
|
|
|
|
memory_region_init(&pfl->mem, OBJECT(pfl), "pflash", pfl->mappings * size);
|
|
pfl->mem_mappings = g_new(MemoryRegion, pfl->mappings);
|
|
for (i = 0; i < pfl->mappings; ++i) {
|
|
memory_region_init_alias(&pfl->mem_mappings[i], OBJECT(pfl),
|
|
"pflash-alias", &pfl->orig_mem, 0, size);
|
|
memory_region_add_subregion(&pfl->mem, i * size, &pfl->mem_mappings[i]);
|
|
}
|
|
}
|
|
|
|
static void pflash_register_memory(PFlashCFI02 *pfl, int rom_mode)
|
|
{
|
|
memory_region_rom_device_set_romd(&pfl->orig_mem, rom_mode);
|
|
pfl->rom_mode = rom_mode;
|
|
}
|
|
|
|
static size_t pflash_regions_count(PFlashCFI02 *pfl)
|
|
{
|
|
return pfl->cfi_table[0x2c];
|
|
}
|
|
|
|
/*
|
|
* Returns the time it takes to erase the number of sectors scheduled for
|
|
* erasure based on CFI address 0x21 which is "Typical timeout per individual
|
|
* block erase 2^N ms."
|
|
*/
|
|
static uint64_t pflash_erase_time(PFlashCFI02 *pfl)
|
|
{
|
|
/*
|
|
* If there are no sectors to erase (which can happen if all of the sectors
|
|
* to be erased are protected), then erase takes 100 us. Protected sectors
|
|
* aren't supported so this should never happen.
|
|
*/
|
|
return ((1ULL << pfl->cfi_table[0x21]) * pfl->sectors_to_erase) * SCALE_US;
|
|
}
|
|
|
|
/*
|
|
* Returns true if the device is currently in erase suspend mode.
|
|
*/
|
|
static inline bool pflash_erase_suspend_mode(PFlashCFI02 *pfl)
|
|
{
|
|
return pfl->erase_time_remaining > 0;
|
|
}
|
|
|
|
static void pflash_timer(void *opaque)
|
|
{
|
|
PFlashCFI02 *pfl = opaque;
|
|
|
|
trace_pflash_timer_expired(pfl->cmd);
|
|
if (pfl->cmd == 0x30) {
|
|
/*
|
|
* Sector erase. If DQ3 is 0 when the timer expires, then the 50
|
|
* us erase timeout has expired so we need to start the timer for the
|
|
* sector erase algorithm. Otherwise, the erase completed and we should
|
|
* go back to read array mode.
|
|
*/
|
|
if ((pfl->status & 0x08) == 0) {
|
|
assert_dq3(pfl);
|
|
uint64_t timeout = pflash_erase_time(pfl);
|
|
timer_mod(&pfl->timer,
|
|
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + timeout);
|
|
DPRINTF("%s: erase timeout fired; erasing %d sectors\n",
|
|
__func__, pfl->sectors_to_erase);
|
|
return;
|
|
}
|
|
DPRINTF("%s: sector erase complete\n", __func__);
|
|
bitmap_zero(pfl->sector_erase_map, pfl->total_sectors);
|
|
pfl->sectors_to_erase = 0;
|
|
reset_dq3(pfl);
|
|
}
|
|
|
|
/* Reset flash */
|
|
toggle_dq7(pfl);
|
|
if (pfl->bypass) {
|
|
pfl->wcycle = 2;
|
|
} else {
|
|
pflash_register_memory(pfl, 1);
|
|
pfl->wcycle = 0;
|
|
}
|
|
pfl->cmd = 0;
|
|
}
|
|
|
|
/*
|
|
* Read data from flash.
|
|
*/
|
|
static uint64_t pflash_data_read(PFlashCFI02 *pfl, hwaddr offset,
|
|
unsigned int width)
|
|
{
|
|
uint8_t *p = (uint8_t *)pfl->storage + offset;
|
|
uint64_t ret = pfl->be ? ldn_be_p(p, width) : ldn_le_p(p, width);
|
|
trace_pflash_data_read(offset, width, ret);
|
|
return ret;
|
|
}
|
|
|
|
typedef struct {
|
|
uint32_t len;
|
|
uint32_t num;
|
|
} SectorInfo;
|
|
|
|
/*
|
|
* offset should be a byte offset of the QEMU device and _not_ a device
|
|
* offset.
|
|
*/
|
|
static SectorInfo pflash_sector_info(PFlashCFI02 *pfl, hwaddr offset)
|
|
{
|
|
assert(offset < pfl->chip_len);
|
|
hwaddr addr = 0;
|
|
uint32_t sector_num = 0;
|
|
for (int i = 0; i < pflash_regions_count(pfl); ++i) {
|
|
uint64_t region_size = (uint64_t)pfl->nb_blocs[i] * pfl->sector_len[i];
|
|
if (addr <= offset && offset < addr + region_size) {
|
|
return (SectorInfo) {
|
|
.len = pfl->sector_len[i],
|
|
.num = sector_num + (offset - addr) / pfl->sector_len[i],
|
|
};
|
|
}
|
|
sector_num += pfl->nb_blocs[i];
|
|
addr += region_size;
|
|
}
|
|
abort();
|
|
}
|
|
|
|
/*
|
|
* Returns true if the offset refers to a flash sector that is currently being
|
|
* erased.
|
|
*/
|
|
static bool pflash_sector_is_erasing(PFlashCFI02 *pfl, hwaddr offset)
|
|
{
|
|
long sector_num = pflash_sector_info(pfl, offset).num;
|
|
return test_bit(sector_num, pfl->sector_erase_map);
|
|
}
|
|
|
|
static uint64_t pflash_read(void *opaque, hwaddr offset, unsigned int width)
|
|
{
|
|
PFlashCFI02 *pfl = opaque;
|
|
hwaddr boff;
|
|
uint64_t ret;
|
|
|
|
/* Lazy reset to ROMD mode after a certain amount of read accesses */
|
|
if (!pfl->rom_mode && pfl->wcycle == 0 &&
|
|
++pfl->read_counter > PFLASH_LAZY_ROMD_THRESHOLD) {
|
|
pflash_register_memory(pfl, 1);
|
|
}
|
|
offset &= pfl->chip_len - 1;
|
|
boff = offset & 0xFF;
|
|
if (pfl->width == 2) {
|
|
boff = boff >> 1;
|
|
} else if (pfl->width == 4) {
|
|
boff = boff >> 2;
|
|
}
|
|
switch (pfl->cmd) {
|
|
default:
|
|
/* This should never happen : reset state & treat it as a read*/
|
|
DPRINTF("%s: unknown command state: %x\n", __func__, pfl->cmd);
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
/* fall through to the read code */
|
|
case 0x80: /* Erase (unlock) */
|
|
/* We accept reads during second unlock sequence... */
|
|
case 0x00:
|
|
if (pflash_erase_suspend_mode(pfl) &&
|
|
pflash_sector_is_erasing(pfl, offset)) {
|
|
/* Toggle bit 2, but not 6. */
|
|
toggle_dq2(pfl);
|
|
/* Status register read */
|
|
ret = pfl->status;
|
|
DPRINTF("%s: status %" PRIx64 "\n", __func__, ret);
|
|
break;
|
|
}
|
|
/* Flash area read */
|
|
ret = pflash_data_read(pfl, offset, width);
|
|
break;
|
|
case 0x90: /* flash ID read */
|
|
switch (boff) {
|
|
case 0x00:
|
|
case 0x01:
|
|
ret = boff & 0x01 ? pfl->ident1 : pfl->ident0;
|
|
break;
|
|
case 0x02:
|
|
ret = 0x00; /* Pretend all sectors are unprotected */
|
|
break;
|
|
case 0x0E:
|
|
case 0x0F:
|
|
ret = boff & 0x01 ? pfl->ident3 : pfl->ident2;
|
|
if (ret != (uint8_t)-1) {
|
|
break;
|
|
}
|
|
/* Fall through to data read. */
|
|
default:
|
|
ret = pflash_data_read(pfl, offset, width);
|
|
}
|
|
DPRINTF("%s: ID " TARGET_FMT_plx " %" PRIx64 "\n", __func__, boff, ret);
|
|
break;
|
|
case 0x10: /* Chip Erase */
|
|
case 0x30: /* Sector Erase */
|
|
/* Toggle bit 2 during erase, but not program. */
|
|
toggle_dq2(pfl);
|
|
/* fall through */
|
|
case 0xA0: /* Program */
|
|
/* Toggle bit 6 */
|
|
toggle_dq6(pfl);
|
|
/* Status register read */
|
|
ret = pfl->status;
|
|
DPRINTF("%s: status %" PRIx64 "\n", __func__, ret);
|
|
break;
|
|
case 0x98:
|
|
/* CFI query mode */
|
|
if (boff < sizeof(pfl->cfi_table)) {
|
|
ret = pfl->cfi_table[boff];
|
|
} else {
|
|
ret = 0;
|
|
}
|
|
break;
|
|
}
|
|
trace_pflash_io_read(offset, width, ret, pfl->cmd, pfl->wcycle);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* update flash content on disk */
|
|
static void pflash_update(PFlashCFI02 *pfl, int offset, int size)
|
|
{
|
|
int offset_end;
|
|
int ret;
|
|
if (pfl->blk) {
|
|
offset_end = offset + size;
|
|
/* widen to sector boundaries */
|
|
offset = QEMU_ALIGN_DOWN(offset, BDRV_SECTOR_SIZE);
|
|
offset_end = QEMU_ALIGN_UP(offset_end, BDRV_SECTOR_SIZE);
|
|
ret = blk_pwrite(pfl->blk, offset, pfl->storage + offset,
|
|
offset_end - offset, 0);
|
|
if (ret < 0) {
|
|
/* TODO set error bit in status */
|
|
error_report("Could not update PFLASH: %s", strerror(-ret));
|
|
}
|
|
}
|
|
}
|
|
|
|
static void pflash_sector_erase(PFlashCFI02 *pfl, hwaddr offset)
|
|
{
|
|
SectorInfo sector_info = pflash_sector_info(pfl, offset);
|
|
uint64_t sector_len = sector_info.len;
|
|
offset &= ~(sector_len - 1);
|
|
DPRINTF("%s: start sector erase at %0*" PRIx64 "-%0*" PRIx64 "\n",
|
|
__func__, pfl->width * 2, offset,
|
|
pfl->width * 2, offset + sector_len - 1);
|
|
if (!pfl->ro) {
|
|
uint8_t *p = pfl->storage;
|
|
memset(p + offset, 0xff, sector_len);
|
|
pflash_update(pfl, offset, sector_len);
|
|
}
|
|
set_dq7(pfl, 0x00);
|
|
++pfl->sectors_to_erase;
|
|
set_bit(sector_info.num, pfl->sector_erase_map);
|
|
/* Set (or reset) the 50 us timer for additional erase commands. */
|
|
timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 50000);
|
|
}
|
|
|
|
static void pflash_write(void *opaque, hwaddr offset, uint64_t value,
|
|
unsigned int width)
|
|
{
|
|
PFlashCFI02 *pfl = opaque;
|
|
hwaddr boff;
|
|
uint8_t *p;
|
|
uint8_t cmd;
|
|
|
|
trace_pflash_io_write(offset, width, value, pfl->wcycle);
|
|
cmd = value;
|
|
if (pfl->cmd != 0xA0) {
|
|
/* Reset does nothing during chip erase and sector erase. */
|
|
if (cmd == 0xF0 && pfl->cmd != 0x10 && pfl->cmd != 0x30) {
|
|
if (pfl->wcycle == WCYCLE_AUTOSELECT_CFI) {
|
|
/* Return to autoselect mode. */
|
|
pfl->wcycle = 3;
|
|
pfl->cmd = 0x90;
|
|
return;
|
|
}
|
|
goto reset_flash;
|
|
}
|
|
}
|
|
offset &= pfl->chip_len - 1;
|
|
|
|
boff = offset;
|
|
if (pfl->width == 2) {
|
|
boff = boff >> 1;
|
|
} else if (pfl->width == 4) {
|
|
boff = boff >> 2;
|
|
}
|
|
/* Only the least-significant 11 bits are used in most cases. */
|
|
boff &= 0x7FF;
|
|
switch (pfl->wcycle) {
|
|
case 0:
|
|
/* Set the device in I/O access mode if required */
|
|
if (pfl->rom_mode)
|
|
pflash_register_memory(pfl, 0);
|
|
pfl->read_counter = 0;
|
|
/* We're in read mode */
|
|
check_unlock0:
|
|
if (boff == 0x55 && cmd == 0x98) {
|
|
/* Enter CFI query mode */
|
|
pfl->wcycle = WCYCLE_CFI;
|
|
pfl->cmd = 0x98;
|
|
return;
|
|
}
|
|
/* Handle erase resume in erase suspend mode, otherwise reset. */
|
|
if (cmd == 0x30) { /* Erase Resume */
|
|
if (pflash_erase_suspend_mode(pfl)) {
|
|
/* Resume the erase. */
|
|
timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
pfl->erase_time_remaining);
|
|
pfl->erase_time_remaining = 0;
|
|
pfl->wcycle = 6;
|
|
pfl->cmd = 0x30;
|
|
set_dq7(pfl, 0x00);
|
|
assert_dq3(pfl);
|
|
return;
|
|
}
|
|
goto reset_flash;
|
|
}
|
|
/* Ignore erase suspend. */
|
|
if (cmd == 0xB0) { /* Erase Suspend */
|
|
return;
|
|
}
|
|
if (boff != pfl->unlock_addr0 || cmd != 0xAA) {
|
|
DPRINTF("%s: unlock0 failed " TARGET_FMT_plx " %02x %04x\n",
|
|
__func__, boff, cmd, pfl->unlock_addr0);
|
|
goto reset_flash;
|
|
}
|
|
DPRINTF("%s: unlock sequence started\n", __func__);
|
|
break;
|
|
case 1:
|
|
/* We started an unlock sequence */
|
|
check_unlock1:
|
|
if (boff != pfl->unlock_addr1 || cmd != 0x55) {
|
|
DPRINTF("%s: unlock1 failed " TARGET_FMT_plx " %02x\n", __func__,
|
|
boff, cmd);
|
|
goto reset_flash;
|
|
}
|
|
DPRINTF("%s: unlock sequence done\n", __func__);
|
|
break;
|
|
case 2:
|
|
/* We finished an unlock sequence */
|
|
if (!pfl->bypass && boff != pfl->unlock_addr0) {
|
|
DPRINTF("%s: command failed " TARGET_FMT_plx " %02x\n", __func__,
|
|
boff, cmd);
|
|
goto reset_flash;
|
|
}
|
|
switch (cmd) {
|
|
case 0x20:
|
|
pfl->bypass = 1;
|
|
goto do_bypass;
|
|
case 0x80: /* Erase */
|
|
case 0x90: /* Autoselect */
|
|
case 0xA0: /* Program */
|
|
pfl->cmd = cmd;
|
|
DPRINTF("%s: starting command %02x\n", __func__, cmd);
|
|
break;
|
|
default:
|
|
DPRINTF("%s: unknown command %02x\n", __func__, cmd);
|
|
goto reset_flash;
|
|
}
|
|
break;
|
|
case 3:
|
|
switch (pfl->cmd) {
|
|
case 0x80: /* Erase */
|
|
/* We need another unlock sequence */
|
|
goto check_unlock0;
|
|
case 0xA0: /* Program */
|
|
if (pflash_erase_suspend_mode(pfl) &&
|
|
pflash_sector_is_erasing(pfl, offset)) {
|
|
/* Ignore writes to erasing sectors. */
|
|
if (pfl->bypass) {
|
|
goto do_bypass;
|
|
}
|
|
goto reset_flash;
|
|
}
|
|
trace_pflash_data_write(offset, width, value, 0);
|
|
if (!pfl->ro) {
|
|
p = (uint8_t *)pfl->storage + offset;
|
|
if (pfl->be) {
|
|
uint64_t current = ldn_be_p(p, width);
|
|
stn_be_p(p, width, current & value);
|
|
} else {
|
|
uint64_t current = ldn_le_p(p, width);
|
|
stn_le_p(p, width, current & value);
|
|
}
|
|
pflash_update(pfl, offset, width);
|
|
}
|
|
/*
|
|
* While programming, status bit DQ7 should hold the opposite
|
|
* value from how it was programmed.
|
|
*/
|
|
set_dq7(pfl, ~value);
|
|
/* Let's pretend write is immediate */
|
|
if (pfl->bypass)
|
|
goto do_bypass;
|
|
goto reset_flash;
|
|
case 0x90: /* Autoselect */
|
|
if (pfl->bypass && cmd == 0x00) {
|
|
/* Unlock bypass reset */
|
|
goto reset_flash;
|
|
}
|
|
/*
|
|
* We can enter CFI query mode from autoselect mode, but we must
|
|
* return to autoselect mode after a reset.
|
|
*/
|
|
if (boff == 0x55 && cmd == 0x98) {
|
|
/* Enter autoselect CFI query mode */
|
|
pfl->wcycle = WCYCLE_AUTOSELECT_CFI;
|
|
pfl->cmd = 0x98;
|
|
return;
|
|
}
|
|
/* fall through */
|
|
default:
|
|
DPRINTF("%s: invalid write for command %02x\n",
|
|
__func__, pfl->cmd);
|
|
goto reset_flash;
|
|
}
|
|
case 4:
|
|
switch (pfl->cmd) {
|
|
case 0xA0: /* Program */
|
|
/* Ignore writes while flash data write is occurring */
|
|
/* As we suppose write is immediate, this should never happen */
|
|
return;
|
|
case 0x80: /* Erase */
|
|
goto check_unlock1;
|
|
default:
|
|
/* Should never happen */
|
|
DPRINTF("%s: invalid command state %02x (wc 4)\n",
|
|
__func__, pfl->cmd);
|
|
goto reset_flash;
|
|
}
|
|
break;
|
|
case 5:
|
|
if (pflash_erase_suspend_mode(pfl)) {
|
|
/* Erasing is not supported in erase suspend mode. */
|
|
goto reset_flash;
|
|
}
|
|
switch (cmd) {
|
|
case 0x10: /* Chip Erase */
|
|
if (boff != pfl->unlock_addr0) {
|
|
DPRINTF("%s: chip erase: invalid address " TARGET_FMT_plx "\n",
|
|
__func__, offset);
|
|
goto reset_flash;
|
|
}
|
|
/* Chip erase */
|
|
DPRINTF("%s: start chip erase\n", __func__);
|
|
if (!pfl->ro) {
|
|
memset(pfl->storage, 0xff, pfl->chip_len);
|
|
pflash_update(pfl, 0, pfl->chip_len);
|
|
}
|
|
set_dq7(pfl, 0x00);
|
|
/* Wait the time specified at CFI address 0x22. */
|
|
timer_mod(&pfl->timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
(1ULL << pfl->cfi_table[0x22]) * SCALE_MS);
|
|
break;
|
|
case 0x30: /* Sector erase */
|
|
pflash_sector_erase(pfl, offset);
|
|
break;
|
|
default:
|
|
DPRINTF("%s: invalid command %02x (wc 5)\n", __func__, cmd);
|
|
goto reset_flash;
|
|
}
|
|
pfl->cmd = cmd;
|
|
break;
|
|
case 6:
|
|
switch (pfl->cmd) {
|
|
case 0x10: /* Chip Erase */
|
|
/* Ignore writes during chip erase */
|
|
return;
|
|
case 0x30: /* Sector erase */
|
|
if (cmd == 0xB0) {
|
|
/*
|
|
* If erase suspend happens during the erase timeout (so DQ3 is
|
|
* 0), then the device suspends erasing immediately. Set the
|
|
* remaining time to be the total time to erase. Otherwise,
|
|
* there is a maximum amount of time it can take to enter
|
|
* suspend mode. Let's ignore that and suspend immediately and
|
|
* set the remaining time to the actual time remaining on the
|
|
* timer.
|
|
*/
|
|
if ((pfl->status & 0x08) == 0) {
|
|
pfl->erase_time_remaining = pflash_erase_time(pfl);
|
|
} else {
|
|
int64_t delta = timer_expire_time_ns(&pfl->timer) -
|
|
qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
|
|
/* Make sure we have a positive time remaining. */
|
|
pfl->erase_time_remaining = delta <= 0 ? 1 : delta;
|
|
}
|
|
reset_dq3(pfl);
|
|
timer_del(&pfl->timer);
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
return;
|
|
}
|
|
/*
|
|
* If DQ3 is 0, additional sector erase commands can be
|
|
* written and anything else (other than an erase suspend) resets
|
|
* the device.
|
|
*/
|
|
if ((pfl->status & 0x08) == 0) {
|
|
if (cmd == 0x30) {
|
|
pflash_sector_erase(pfl, offset);
|
|
} else {
|
|
goto reset_flash;
|
|
}
|
|
}
|
|
/* Ignore writes during the actual erase. */
|
|
return;
|
|
default:
|
|
/* Should never happen */
|
|
DPRINTF("%s: invalid command state %02x (wc 6)\n",
|
|
__func__, pfl->cmd);
|
|
goto reset_flash;
|
|
}
|
|
break;
|
|
/* Special values for CFI queries */
|
|
case WCYCLE_CFI:
|
|
case WCYCLE_AUTOSELECT_CFI:
|
|
DPRINTF("%s: invalid write in CFI query mode\n", __func__);
|
|
goto reset_flash;
|
|
default:
|
|
/* Should never happen */
|
|
DPRINTF("%s: invalid write state (wc 7)\n", __func__);
|
|
goto reset_flash;
|
|
}
|
|
pfl->wcycle++;
|
|
|
|
return;
|
|
|
|
/* Reset flash */
|
|
reset_flash:
|
|
trace_pflash_reset();
|
|
pfl->bypass = 0;
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
return;
|
|
|
|
do_bypass:
|
|
pfl->wcycle = 2;
|
|
pfl->cmd = 0;
|
|
}
|
|
|
|
static const MemoryRegionOps pflash_cfi02_ops = {
|
|
.read = pflash_read,
|
|
.write = pflash_write,
|
|
.valid.min_access_size = 1,
|
|
.valid.max_access_size = 4,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static void pflash_cfi02_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
ERRP_GUARD();
|
|
PFlashCFI02 *pfl = PFLASH_CFI02(dev);
|
|
int ret;
|
|
|
|
if (pfl->uniform_sector_len == 0 && pfl->sector_len[0] == 0) {
|
|
error_setg(errp, "attribute \"sector-length\" not specified or zero.");
|
|
return;
|
|
}
|
|
if (pfl->uniform_nb_blocs == 0 && pfl->nb_blocs[0] == 0) {
|
|
error_setg(errp, "attribute \"num-blocks\" not specified or zero.");
|
|
return;
|
|
}
|
|
if (pfl->name == NULL) {
|
|
error_setg(errp, "attribute \"name\" not specified.");
|
|
return;
|
|
}
|
|
|
|
int nb_regions;
|
|
pfl->chip_len = 0;
|
|
pfl->total_sectors = 0;
|
|
for (nb_regions = 0; nb_regions < PFLASH_MAX_ERASE_REGIONS; ++nb_regions) {
|
|
if (pfl->nb_blocs[nb_regions] == 0) {
|
|
break;
|
|
}
|
|
pfl->total_sectors += pfl->nb_blocs[nb_regions];
|
|
uint64_t sector_len_per_device = pfl->sector_len[nb_regions];
|
|
|
|
/*
|
|
* The size of each flash sector must be a power of 2 and it must be
|
|
* aligned at the same power of 2.
|
|
*/
|
|
if (sector_len_per_device & 0xff ||
|
|
sector_len_per_device >= (1 << 24) ||
|
|
!is_power_of_2(sector_len_per_device))
|
|
{
|
|
error_setg(errp, "unsupported configuration: "
|
|
"sector length[%d] per device = %" PRIx64 ".",
|
|
nb_regions, sector_len_per_device);
|
|
return;
|
|
}
|
|
if (pfl->chip_len & (sector_len_per_device - 1)) {
|
|
error_setg(errp, "unsupported configuration: "
|
|
"flash region %d not correctly aligned.",
|
|
nb_regions);
|
|
return;
|
|
}
|
|
|
|
pfl->chip_len += (uint64_t)pfl->sector_len[nb_regions] *
|
|
pfl->nb_blocs[nb_regions];
|
|
}
|
|
|
|
uint64_t uniform_len = (uint64_t)pfl->uniform_nb_blocs *
|
|
pfl->uniform_sector_len;
|
|
if (nb_regions == 0) {
|
|
nb_regions = 1;
|
|
pfl->nb_blocs[0] = pfl->uniform_nb_blocs;
|
|
pfl->sector_len[0] = pfl->uniform_sector_len;
|
|
pfl->chip_len = uniform_len;
|
|
pfl->total_sectors = pfl->uniform_nb_blocs;
|
|
} else if (uniform_len != 0 && uniform_len != pfl->chip_len) {
|
|
error_setg(errp, "\"num-blocks\"*\"sector-length\" "
|
|
"different from \"num-blocks0\"*\'sector-length0\" + ... + "
|
|
"\"num-blocks3\"*\"sector-length3\"");
|
|
return;
|
|
}
|
|
|
|
memory_region_init_rom_device(&pfl->orig_mem, OBJECT(pfl),
|
|
&pflash_cfi02_ops, pfl, pfl->name,
|
|
pfl->chip_len, errp);
|
|
if (*errp) {
|
|
return;
|
|
}
|
|
|
|
pfl->storage = memory_region_get_ram_ptr(&pfl->orig_mem);
|
|
|
|
if (pfl->blk) {
|
|
uint64_t perm;
|
|
pfl->ro = !blk_supports_write_perm(pfl->blk);
|
|
perm = BLK_PERM_CONSISTENT_READ | (pfl->ro ? 0 : BLK_PERM_WRITE);
|
|
ret = blk_set_perm(pfl->blk, perm, BLK_PERM_ALL, errp);
|
|
if (ret < 0) {
|
|
return;
|
|
}
|
|
} else {
|
|
pfl->ro = 0;
|
|
}
|
|
|
|
if (pfl->blk) {
|
|
if (!blk_check_size_and_read_all(pfl->blk, pfl->storage,
|
|
pfl->chip_len, errp)) {
|
|
vmstate_unregister_ram(&pfl->orig_mem, DEVICE(pfl));
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Only 11 bits are used in the comparison. */
|
|
pfl->unlock_addr0 &= 0x7FF;
|
|
pfl->unlock_addr1 &= 0x7FF;
|
|
|
|
/* Allocate memory for a bitmap for sectors being erased. */
|
|
pfl->sector_erase_map = bitmap_new(pfl->total_sectors);
|
|
|
|
pflash_setup_mappings(pfl);
|
|
pfl->rom_mode = 1;
|
|
sysbus_init_mmio(SYS_BUS_DEVICE(dev), &pfl->mem);
|
|
|
|
timer_init_ns(&pfl->timer, QEMU_CLOCK_VIRTUAL, pflash_timer, pfl);
|
|
pfl->wcycle = 0;
|
|
pfl->cmd = 0;
|
|
pfl->status = 0;
|
|
|
|
/* Hardcoded CFI table (mostly from SG29 Spansion flash) */
|
|
const uint16_t pri_ofs = 0x40;
|
|
/* Standard "QRY" string */
|
|
pfl->cfi_table[0x10] = 'Q';
|
|
pfl->cfi_table[0x11] = 'R';
|
|
pfl->cfi_table[0x12] = 'Y';
|
|
/* Command set (AMD/Fujitsu) */
|
|
pfl->cfi_table[0x13] = 0x02;
|
|
pfl->cfi_table[0x14] = 0x00;
|
|
/* Primary extended table address */
|
|
pfl->cfi_table[0x15] = pri_ofs;
|
|
pfl->cfi_table[0x16] = pri_ofs >> 8;
|
|
/* Alternate command set (none) */
|
|
pfl->cfi_table[0x17] = 0x00;
|
|
pfl->cfi_table[0x18] = 0x00;
|
|
/* Alternate extended table (none) */
|
|
pfl->cfi_table[0x19] = 0x00;
|
|
pfl->cfi_table[0x1A] = 0x00;
|
|
/* Vcc min */
|
|
pfl->cfi_table[0x1B] = 0x27;
|
|
/* Vcc max */
|
|
pfl->cfi_table[0x1C] = 0x36;
|
|
/* Vpp min (no Vpp pin) */
|
|
pfl->cfi_table[0x1D] = 0x00;
|
|
/* Vpp max (no Vpp pin) */
|
|
pfl->cfi_table[0x1E] = 0x00;
|
|
/* Timeout per single byte/word write (128 ms) */
|
|
pfl->cfi_table[0x1F] = 0x07;
|
|
/* Timeout for min size buffer write (NA) */
|
|
pfl->cfi_table[0x20] = 0x00;
|
|
/* Typical timeout for block erase (512 ms) */
|
|
pfl->cfi_table[0x21] = 0x09;
|
|
/* Typical timeout for full chip erase (4096 ms) */
|
|
pfl->cfi_table[0x22] = 0x0C;
|
|
/* Reserved */
|
|
pfl->cfi_table[0x23] = 0x01;
|
|
/* Max timeout for buffer write (NA) */
|
|
pfl->cfi_table[0x24] = 0x00;
|
|
/* Max timeout for block erase */
|
|
pfl->cfi_table[0x25] = 0x0A;
|
|
/* Max timeout for chip erase */
|
|
pfl->cfi_table[0x26] = 0x0D;
|
|
/* Device size */
|
|
pfl->cfi_table[0x27] = ctz32(pfl->chip_len);
|
|
/* Flash device interface (8 & 16 bits) */
|
|
pfl->cfi_table[0x28] = 0x02;
|
|
pfl->cfi_table[0x29] = 0x00;
|
|
/* Max number of bytes in multi-bytes write */
|
|
/* XXX: disable buffered write as it's not supported */
|
|
// pfl->cfi_table[0x2A] = 0x05;
|
|
pfl->cfi_table[0x2A] = 0x00;
|
|
pfl->cfi_table[0x2B] = 0x00;
|
|
/* Number of erase block regions */
|
|
pfl->cfi_table[0x2c] = nb_regions;
|
|
/* Erase block regions */
|
|
for (int i = 0; i < nb_regions; ++i) {
|
|
uint32_t sector_len_per_device = pfl->sector_len[i];
|
|
pfl->cfi_table[0x2d + 4 * i] = pfl->nb_blocs[i] - 1;
|
|
pfl->cfi_table[0x2e + 4 * i] = (pfl->nb_blocs[i] - 1) >> 8;
|
|
pfl->cfi_table[0x2f + 4 * i] = sector_len_per_device >> 8;
|
|
pfl->cfi_table[0x30 + 4 * i] = sector_len_per_device >> 16;
|
|
}
|
|
assert(0x2c + 4 * nb_regions < pri_ofs);
|
|
|
|
/* Extended */
|
|
pfl->cfi_table[0x00 + pri_ofs] = 'P';
|
|
pfl->cfi_table[0x01 + pri_ofs] = 'R';
|
|
pfl->cfi_table[0x02 + pri_ofs] = 'I';
|
|
|
|
/* Extended version 1.0 */
|
|
pfl->cfi_table[0x03 + pri_ofs] = '1';
|
|
pfl->cfi_table[0x04 + pri_ofs] = '0';
|
|
|
|
/* Address sensitive unlock required. */
|
|
pfl->cfi_table[0x05 + pri_ofs] = 0x00;
|
|
/* Erase suspend to read/write. */
|
|
pfl->cfi_table[0x06 + pri_ofs] = 0x02;
|
|
/* Sector protect not supported. */
|
|
pfl->cfi_table[0x07 + pri_ofs] = 0x00;
|
|
/* Temporary sector unprotect not supported. */
|
|
pfl->cfi_table[0x08 + pri_ofs] = 0x00;
|
|
|
|
/* Sector protect/unprotect scheme. */
|
|
pfl->cfi_table[0x09 + pri_ofs] = 0x00;
|
|
|
|
/* Simultaneous operation not supported. */
|
|
pfl->cfi_table[0x0a + pri_ofs] = 0x00;
|
|
/* Burst mode not supported. */
|
|
pfl->cfi_table[0x0b + pri_ofs] = 0x00;
|
|
/* Page mode not supported. */
|
|
pfl->cfi_table[0x0c + pri_ofs] = 0x00;
|
|
assert(0x0c + pri_ofs < ARRAY_SIZE(pfl->cfi_table));
|
|
}
|
|
|
|
static Property pflash_cfi02_properties[] = {
|
|
DEFINE_PROP_DRIVE("drive", PFlashCFI02, blk),
|
|
DEFINE_PROP_UINT32("num-blocks", PFlashCFI02, uniform_nb_blocs, 0),
|
|
DEFINE_PROP_UINT32("sector-length", PFlashCFI02, uniform_sector_len, 0),
|
|
DEFINE_PROP_UINT32("num-blocks0", PFlashCFI02, nb_blocs[0], 0),
|
|
DEFINE_PROP_UINT32("sector-length0", PFlashCFI02, sector_len[0], 0),
|
|
DEFINE_PROP_UINT32("num-blocks1", PFlashCFI02, nb_blocs[1], 0),
|
|
DEFINE_PROP_UINT32("sector-length1", PFlashCFI02, sector_len[1], 0),
|
|
DEFINE_PROP_UINT32("num-blocks2", PFlashCFI02, nb_blocs[2], 0),
|
|
DEFINE_PROP_UINT32("sector-length2", PFlashCFI02, sector_len[2], 0),
|
|
DEFINE_PROP_UINT32("num-blocks3", PFlashCFI02, nb_blocs[3], 0),
|
|
DEFINE_PROP_UINT32("sector-length3", PFlashCFI02, sector_len[3], 0),
|
|
DEFINE_PROP_UINT8("width", PFlashCFI02, width, 0),
|
|
DEFINE_PROP_UINT8("mappings", PFlashCFI02, mappings, 0),
|
|
DEFINE_PROP_UINT8("big-endian", PFlashCFI02, be, 0),
|
|
DEFINE_PROP_UINT16("id0", PFlashCFI02, ident0, 0),
|
|
DEFINE_PROP_UINT16("id1", PFlashCFI02, ident1, 0),
|
|
DEFINE_PROP_UINT16("id2", PFlashCFI02, ident2, 0),
|
|
DEFINE_PROP_UINT16("id3", PFlashCFI02, ident3, 0),
|
|
DEFINE_PROP_UINT16("unlock-addr0", PFlashCFI02, unlock_addr0, 0),
|
|
DEFINE_PROP_UINT16("unlock-addr1", PFlashCFI02, unlock_addr1, 0),
|
|
DEFINE_PROP_STRING("name", PFlashCFI02, name),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void pflash_cfi02_unrealize(DeviceState *dev)
|
|
{
|
|
PFlashCFI02 *pfl = PFLASH_CFI02(dev);
|
|
timer_del(&pfl->timer);
|
|
g_free(pfl->sector_erase_map);
|
|
}
|
|
|
|
static void pflash_cfi02_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
dc->realize = pflash_cfi02_realize;
|
|
dc->unrealize = pflash_cfi02_unrealize;
|
|
device_class_set_props(dc, pflash_cfi02_properties);
|
|
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
|
|
}
|
|
|
|
static const TypeInfo pflash_cfi02_info = {
|
|
.name = TYPE_PFLASH_CFI02,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(PFlashCFI02),
|
|
.class_init = pflash_cfi02_class_init,
|
|
};
|
|
|
|
static void pflash_cfi02_register_types(void)
|
|
{
|
|
type_register_static(&pflash_cfi02_info);
|
|
}
|
|
|
|
type_init(pflash_cfi02_register_types)
|
|
|
|
PFlashCFI02 *pflash_cfi02_register(hwaddr base,
|
|
const char *name,
|
|
hwaddr size,
|
|
BlockBackend *blk,
|
|
uint32_t sector_len,
|
|
int nb_mappings, int width,
|
|
uint16_t id0, uint16_t id1,
|
|
uint16_t id2, uint16_t id3,
|
|
uint16_t unlock_addr0,
|
|
uint16_t unlock_addr1,
|
|
int be)
|
|
{
|
|
DeviceState *dev = qdev_new(TYPE_PFLASH_CFI02);
|
|
|
|
if (blk) {
|
|
qdev_prop_set_drive(dev, "drive", blk);
|
|
}
|
|
assert(QEMU_IS_ALIGNED(size, sector_len));
|
|
qdev_prop_set_uint32(dev, "num-blocks", size / sector_len);
|
|
qdev_prop_set_uint32(dev, "sector-length", sector_len);
|
|
qdev_prop_set_uint8(dev, "width", width);
|
|
qdev_prop_set_uint8(dev, "mappings", nb_mappings);
|
|
qdev_prop_set_uint8(dev, "big-endian", !!be);
|
|
qdev_prop_set_uint16(dev, "id0", id0);
|
|
qdev_prop_set_uint16(dev, "id1", id1);
|
|
qdev_prop_set_uint16(dev, "id2", id2);
|
|
qdev_prop_set_uint16(dev, "id3", id3);
|
|
qdev_prop_set_uint16(dev, "unlock-addr0", unlock_addr0);
|
|
qdev_prop_set_uint16(dev, "unlock-addr1", unlock_addr1);
|
|
qdev_prop_set_string(dev, "name", name);
|
|
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
|
|
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
|
|
return PFLASH_CFI02(dev);
|
|
}
|