Pass the BlockDeviceState to the nand_init() function rather than having it look it up via drive_get() itself. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
1120 lines
32 KiB
C
1120 lines
32 KiB
C
/*
|
|
* PXA270-based Clamshell PDA platforms.
|
|
*
|
|
* Copyright (c) 2006 Openedhand Ltd.
|
|
* Written by Andrzej Zaborowski <balrog@zabor.org>
|
|
*
|
|
* This code is licensed under the GNU GPL v2.
|
|
*/
|
|
|
|
#include "hw.h"
|
|
#include "pxa.h"
|
|
#include "arm-misc.h"
|
|
#include "sysemu.h"
|
|
#include "pcmcia.h"
|
|
#include "i2c.h"
|
|
#include "ssi.h"
|
|
#include "flash.h"
|
|
#include "qemu-timer.h"
|
|
#include "devices.h"
|
|
#include "sharpsl.h"
|
|
#include "console.h"
|
|
#include "block.h"
|
|
#include "audio/audio.h"
|
|
#include "boards.h"
|
|
#include "blockdev.h"
|
|
#include "sysbus.h"
|
|
|
|
#undef REG_FMT
|
|
#define REG_FMT "0x%02lx"
|
|
|
|
/* Spitz Flash */
|
|
#define FLASH_BASE 0x0c000000
|
|
#define FLASH_ECCLPLB 0x00 /* Line parity 7 - 0 bit */
|
|
#define FLASH_ECCLPUB 0x04 /* Line parity 15 - 8 bit */
|
|
#define FLASH_ECCCP 0x08 /* Column parity 5 - 0 bit */
|
|
#define FLASH_ECCCNTR 0x0c /* ECC byte counter */
|
|
#define FLASH_ECCCLRR 0x10 /* Clear ECC */
|
|
#define FLASH_FLASHIO 0x14 /* Flash I/O */
|
|
#define FLASH_FLASHCTL 0x18 /* Flash Control */
|
|
|
|
#define FLASHCTL_CE0 (1 << 0)
|
|
#define FLASHCTL_CLE (1 << 1)
|
|
#define FLASHCTL_ALE (1 << 2)
|
|
#define FLASHCTL_WP (1 << 3)
|
|
#define FLASHCTL_CE1 (1 << 4)
|
|
#define FLASHCTL_RYBY (1 << 5)
|
|
#define FLASHCTL_NCE (FLASHCTL_CE0 | FLASHCTL_CE1)
|
|
|
|
typedef struct {
|
|
SysBusDevice busdev;
|
|
NANDFlashState *nand;
|
|
uint8_t ctl;
|
|
uint8_t manf_id;
|
|
uint8_t chip_id;
|
|
ECCState ecc;
|
|
} SLNANDState;
|
|
|
|
static uint32_t sl_readb(void *opaque, target_phys_addr_t addr)
|
|
{
|
|
SLNANDState *s = (SLNANDState *) opaque;
|
|
int ryby;
|
|
|
|
switch (addr) {
|
|
#define BSHR(byte, from, to) ((s->ecc.lp[byte] >> (from - to)) & (1 << to))
|
|
case FLASH_ECCLPLB:
|
|
return BSHR(0, 4, 0) | BSHR(0, 5, 2) | BSHR(0, 6, 4) | BSHR(0, 7, 6) |
|
|
BSHR(1, 4, 1) | BSHR(1, 5, 3) | BSHR(1, 6, 5) | BSHR(1, 7, 7);
|
|
|
|
#define BSHL(byte, from, to) ((s->ecc.lp[byte] << (to - from)) & (1 << to))
|
|
case FLASH_ECCLPUB:
|
|
return BSHL(0, 0, 0) | BSHL(0, 1, 2) | BSHL(0, 2, 4) | BSHL(0, 3, 6) |
|
|
BSHL(1, 0, 1) | BSHL(1, 1, 3) | BSHL(1, 2, 5) | BSHL(1, 3, 7);
|
|
|
|
case FLASH_ECCCP:
|
|
return s->ecc.cp;
|
|
|
|
case FLASH_ECCCNTR:
|
|
return s->ecc.count & 0xff;
|
|
|
|
case FLASH_FLASHCTL:
|
|
nand_getpins(s->nand, &ryby);
|
|
if (ryby)
|
|
return s->ctl | FLASHCTL_RYBY;
|
|
else
|
|
return s->ctl;
|
|
|
|
case FLASH_FLASHIO:
|
|
return ecc_digest(&s->ecc, nand_getio(s->nand));
|
|
|
|
default:
|
|
zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t sl_readl(void *opaque, target_phys_addr_t addr)
|
|
{
|
|
SLNANDState *s = (SLNANDState *) opaque;
|
|
|
|
if (addr == FLASH_FLASHIO)
|
|
return ecc_digest(&s->ecc, nand_getio(s->nand)) |
|
|
(ecc_digest(&s->ecc, nand_getio(s->nand)) << 16);
|
|
|
|
return sl_readb(opaque, addr);
|
|
}
|
|
|
|
static void sl_writeb(void *opaque, target_phys_addr_t addr,
|
|
uint32_t value)
|
|
{
|
|
SLNANDState *s = (SLNANDState *) opaque;
|
|
|
|
switch (addr) {
|
|
case FLASH_ECCCLRR:
|
|
/* Value is ignored. */
|
|
ecc_reset(&s->ecc);
|
|
break;
|
|
|
|
case FLASH_FLASHCTL:
|
|
s->ctl = value & 0xff & ~FLASHCTL_RYBY;
|
|
nand_setpins(s->nand,
|
|
s->ctl & FLASHCTL_CLE,
|
|
s->ctl & FLASHCTL_ALE,
|
|
s->ctl & FLASHCTL_NCE,
|
|
s->ctl & FLASHCTL_WP,
|
|
0);
|
|
break;
|
|
|
|
case FLASH_FLASHIO:
|
|
nand_setio(s->nand, ecc_digest(&s->ecc, value & 0xff));
|
|
break;
|
|
|
|
default:
|
|
zaurus_printf("Bad register offset " REG_FMT "\n", (unsigned long)addr);
|
|
}
|
|
}
|
|
|
|
enum {
|
|
FLASH_128M,
|
|
FLASH_1024M,
|
|
};
|
|
|
|
static CPUReadMemoryFunc * const sl_readfn[] = {
|
|
sl_readb,
|
|
sl_readb,
|
|
sl_readl,
|
|
};
|
|
static CPUWriteMemoryFunc * const sl_writefn[] = {
|
|
sl_writeb,
|
|
sl_writeb,
|
|
sl_writeb,
|
|
};
|
|
|
|
static void sl_flash_register(PXA2xxState *cpu, int size)
|
|
{
|
|
DeviceState *dev;
|
|
|
|
dev = qdev_create(NULL, "sl-nand");
|
|
|
|
qdev_prop_set_uint8(dev, "manf_id", NAND_MFR_SAMSUNG);
|
|
if (size == FLASH_128M)
|
|
qdev_prop_set_uint8(dev, "chip_id", 0x73);
|
|
else if (size == FLASH_1024M)
|
|
qdev_prop_set_uint8(dev, "chip_id", 0xf1);
|
|
|
|
qdev_init_nofail(dev);
|
|
sysbus_mmio_map(sysbus_from_qdev(dev), 0, FLASH_BASE);
|
|
}
|
|
|
|
static int sl_nand_init(SysBusDevice *dev) {
|
|
int iomemtype;
|
|
SLNANDState *s;
|
|
DriveInfo *nand;
|
|
|
|
s = FROM_SYSBUS(SLNANDState, dev);
|
|
|
|
s->ctl = 0;
|
|
nand = drive_get(IF_MTD, 0, 0);
|
|
s->nand = nand_init(nand ? nand->bdrv : NULL, s->manf_id, s->chip_id);
|
|
|
|
iomemtype = cpu_register_io_memory(sl_readfn,
|
|
sl_writefn, s, DEVICE_NATIVE_ENDIAN);
|
|
|
|
sysbus_init_mmio(dev, 0x40, iomemtype);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Spitz Keyboard */
|
|
|
|
#define SPITZ_KEY_STROBE_NUM 11
|
|
#define SPITZ_KEY_SENSE_NUM 7
|
|
|
|
static const int spitz_gpio_key_sense[SPITZ_KEY_SENSE_NUM] = {
|
|
12, 17, 91, 34, 36, 38, 39
|
|
};
|
|
|
|
static const int spitz_gpio_key_strobe[SPITZ_KEY_STROBE_NUM] = {
|
|
88, 23, 24, 25, 26, 27, 52, 103, 107, 108, 114
|
|
};
|
|
|
|
/* Eighth additional row maps the special keys */
|
|
static int spitz_keymap[SPITZ_KEY_SENSE_NUM + 1][SPITZ_KEY_STROBE_NUM] = {
|
|
{ 0x1d, 0x02, 0x04, 0x06, 0x07, 0x08, 0x0a, 0x0b, 0x0e, 0x3f, 0x40 },
|
|
{ -1 , 0x03, 0x05, 0x13, 0x15, 0x09, 0x17, 0x18, 0x19, 0x41, 0x42 },
|
|
{ 0x0f, 0x10, 0x12, 0x14, 0x22, 0x16, 0x24, 0x25, -1 , -1 , -1 },
|
|
{ 0x3c, 0x11, 0x1f, 0x21, 0x2f, 0x23, 0x32, 0x26, -1 , 0x36, -1 },
|
|
{ 0x3b, 0x1e, 0x20, 0x2e, 0x30, 0x31, 0x34, -1 , 0x1c, 0x2a, -1 },
|
|
{ 0x44, 0x2c, 0x2d, 0x0c, 0x39, 0x33, -1 , 0x48, -1 , -1 , 0x38 },
|
|
{ 0x37, 0x3d, -1 , 0x45, 0x57, 0x58, 0x4b, 0x50, 0x4d, -1 , -1 },
|
|
{ 0x52, 0x43, 0x01, 0x47, 0x49, -1 , -1 , -1 , -1 , -1 , -1 },
|
|
};
|
|
|
|
#define SPITZ_GPIO_AK_INT 13 /* Remote control */
|
|
#define SPITZ_GPIO_SYNC 16 /* Sync button */
|
|
#define SPITZ_GPIO_ON_KEY 95 /* Power button */
|
|
#define SPITZ_GPIO_SWA 97 /* Lid */
|
|
#define SPITZ_GPIO_SWB 96 /* Tablet mode */
|
|
|
|
/* The special buttons are mapped to unused keys */
|
|
static const int spitz_gpiomap[5] = {
|
|
SPITZ_GPIO_AK_INT, SPITZ_GPIO_SYNC, SPITZ_GPIO_ON_KEY,
|
|
SPITZ_GPIO_SWA, SPITZ_GPIO_SWB,
|
|
};
|
|
|
|
typedef struct {
|
|
SysBusDevice busdev;
|
|
qemu_irq sense[SPITZ_KEY_SENSE_NUM];
|
|
qemu_irq gpiomap[5];
|
|
int keymap[0x80];
|
|
uint16_t keyrow[SPITZ_KEY_SENSE_NUM];
|
|
uint16_t strobe_state;
|
|
uint16_t sense_state;
|
|
|
|
uint16_t pre_map[0x100];
|
|
uint16_t modifiers;
|
|
uint16_t imodifiers;
|
|
uint8_t fifo[16];
|
|
int fifopos, fifolen;
|
|
QEMUTimer *kbdtimer;
|
|
} SpitzKeyboardState;
|
|
|
|
static void spitz_keyboard_sense_update(SpitzKeyboardState *s)
|
|
{
|
|
int i;
|
|
uint16_t strobe, sense = 0;
|
|
for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++) {
|
|
strobe = s->keyrow[i] & s->strobe_state;
|
|
if (strobe) {
|
|
sense |= 1 << i;
|
|
if (!(s->sense_state & (1 << i)))
|
|
qemu_irq_raise(s->sense[i]);
|
|
} else if (s->sense_state & (1 << i))
|
|
qemu_irq_lower(s->sense[i]);
|
|
}
|
|
|
|
s->sense_state = sense;
|
|
}
|
|
|
|
static void spitz_keyboard_strobe(void *opaque, int line, int level)
|
|
{
|
|
SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;
|
|
|
|
if (level)
|
|
s->strobe_state |= 1 << line;
|
|
else
|
|
s->strobe_state &= ~(1 << line);
|
|
spitz_keyboard_sense_update(s);
|
|
}
|
|
|
|
static void spitz_keyboard_keydown(SpitzKeyboardState *s, int keycode)
|
|
{
|
|
int spitz_keycode = s->keymap[keycode & 0x7f];
|
|
if (spitz_keycode == -1)
|
|
return;
|
|
|
|
/* Handle the additional keys */
|
|
if ((spitz_keycode >> 4) == SPITZ_KEY_SENSE_NUM) {
|
|
qemu_set_irq(s->gpiomap[spitz_keycode & 0xf], (keycode < 0x80));
|
|
return;
|
|
}
|
|
|
|
if (keycode & 0x80)
|
|
s->keyrow[spitz_keycode >> 4] &= ~(1 << (spitz_keycode & 0xf));
|
|
else
|
|
s->keyrow[spitz_keycode >> 4] |= 1 << (spitz_keycode & 0xf);
|
|
|
|
spitz_keyboard_sense_update(s);
|
|
}
|
|
|
|
#define SHIFT (1 << 7)
|
|
#define CTRL (1 << 8)
|
|
#define FN (1 << 9)
|
|
|
|
#define QUEUE_KEY(c) s->fifo[(s->fifopos + s->fifolen ++) & 0xf] = c
|
|
|
|
static void spitz_keyboard_handler(void *opaque, int keycode)
|
|
{
|
|
SpitzKeyboardState *s = opaque;
|
|
uint16_t code;
|
|
int mapcode;
|
|
switch (keycode) {
|
|
case 0x2a: /* Left Shift */
|
|
s->modifiers |= 1;
|
|
break;
|
|
case 0xaa:
|
|
s->modifiers &= ~1;
|
|
break;
|
|
case 0x36: /* Right Shift */
|
|
s->modifiers |= 2;
|
|
break;
|
|
case 0xb6:
|
|
s->modifiers &= ~2;
|
|
break;
|
|
case 0x1d: /* Control */
|
|
s->modifiers |= 4;
|
|
break;
|
|
case 0x9d:
|
|
s->modifiers &= ~4;
|
|
break;
|
|
case 0x38: /* Alt */
|
|
s->modifiers |= 8;
|
|
break;
|
|
case 0xb8:
|
|
s->modifiers &= ~8;
|
|
break;
|
|
}
|
|
|
|
code = s->pre_map[mapcode = ((s->modifiers & 3) ?
|
|
(keycode | SHIFT) :
|
|
(keycode & ~SHIFT))];
|
|
|
|
if (code != mapcode) {
|
|
#if 0
|
|
if ((code & SHIFT) && !(s->modifiers & 1))
|
|
QUEUE_KEY(0x2a | (keycode & 0x80));
|
|
if ((code & CTRL ) && !(s->modifiers & 4))
|
|
QUEUE_KEY(0x1d | (keycode & 0x80));
|
|
if ((code & FN ) && !(s->modifiers & 8))
|
|
QUEUE_KEY(0x38 | (keycode & 0x80));
|
|
if ((code & FN ) && (s->modifiers & 1))
|
|
QUEUE_KEY(0x2a | (~keycode & 0x80));
|
|
if ((code & FN ) && (s->modifiers & 2))
|
|
QUEUE_KEY(0x36 | (~keycode & 0x80));
|
|
#else
|
|
if (keycode & 0x80) {
|
|
if ((s->imodifiers & 1 ) && !(s->modifiers & 1))
|
|
QUEUE_KEY(0x2a | 0x80);
|
|
if ((s->imodifiers & 4 ) && !(s->modifiers & 4))
|
|
QUEUE_KEY(0x1d | 0x80);
|
|
if ((s->imodifiers & 8 ) && !(s->modifiers & 8))
|
|
QUEUE_KEY(0x38 | 0x80);
|
|
if ((s->imodifiers & 0x10) && (s->modifiers & 1))
|
|
QUEUE_KEY(0x2a);
|
|
if ((s->imodifiers & 0x20) && (s->modifiers & 2))
|
|
QUEUE_KEY(0x36);
|
|
s->imodifiers = 0;
|
|
} else {
|
|
if ((code & SHIFT) && !((s->modifiers | s->imodifiers) & 1)) {
|
|
QUEUE_KEY(0x2a);
|
|
s->imodifiers |= 1;
|
|
}
|
|
if ((code & CTRL ) && !((s->modifiers | s->imodifiers) & 4)) {
|
|
QUEUE_KEY(0x1d);
|
|
s->imodifiers |= 4;
|
|
}
|
|
if ((code & FN ) && !((s->modifiers | s->imodifiers) & 8)) {
|
|
QUEUE_KEY(0x38);
|
|
s->imodifiers |= 8;
|
|
}
|
|
if ((code & FN ) && (s->modifiers & 1) &&
|
|
!(s->imodifiers & 0x10)) {
|
|
QUEUE_KEY(0x2a | 0x80);
|
|
s->imodifiers |= 0x10;
|
|
}
|
|
if ((code & FN ) && (s->modifiers & 2) &&
|
|
!(s->imodifiers & 0x20)) {
|
|
QUEUE_KEY(0x36 | 0x80);
|
|
s->imodifiers |= 0x20;
|
|
}
|
|
}
|
|
#endif
|
|
}
|
|
|
|
QUEUE_KEY((code & 0x7f) | (keycode & 0x80));
|
|
}
|
|
|
|
static void spitz_keyboard_tick(void *opaque)
|
|
{
|
|
SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;
|
|
|
|
if (s->fifolen) {
|
|
spitz_keyboard_keydown(s, s->fifo[s->fifopos ++]);
|
|
s->fifolen --;
|
|
if (s->fifopos >= 16)
|
|
s->fifopos = 0;
|
|
}
|
|
|
|
qemu_mod_timer(s->kbdtimer, qemu_get_clock_ns(vm_clock) +
|
|
get_ticks_per_sec() / 32);
|
|
}
|
|
|
|
static void spitz_keyboard_pre_map(SpitzKeyboardState *s)
|
|
{
|
|
int i;
|
|
for (i = 0; i < 0x100; i ++)
|
|
s->pre_map[i] = i;
|
|
s->pre_map[0x02 | SHIFT ] = 0x02 | SHIFT; /* exclam */
|
|
s->pre_map[0x28 | SHIFT ] = 0x03 | SHIFT; /* quotedbl */
|
|
s->pre_map[0x04 | SHIFT ] = 0x04 | SHIFT; /* numbersign */
|
|
s->pre_map[0x05 | SHIFT ] = 0x05 | SHIFT; /* dollar */
|
|
s->pre_map[0x06 | SHIFT ] = 0x06 | SHIFT; /* percent */
|
|
s->pre_map[0x08 | SHIFT ] = 0x07 | SHIFT; /* ampersand */
|
|
s->pre_map[0x28 ] = 0x08 | SHIFT; /* apostrophe */
|
|
s->pre_map[0x0a | SHIFT ] = 0x09 | SHIFT; /* parenleft */
|
|
s->pre_map[0x0b | SHIFT ] = 0x0a | SHIFT; /* parenright */
|
|
s->pre_map[0x29 | SHIFT ] = 0x0b | SHIFT; /* asciitilde */
|
|
s->pre_map[0x03 | SHIFT ] = 0x0c | SHIFT; /* at */
|
|
s->pre_map[0xd3 ] = 0x0e | FN; /* Delete */
|
|
s->pre_map[0x3a ] = 0x0f | FN; /* Caps_Lock */
|
|
s->pre_map[0x07 | SHIFT ] = 0x11 | FN; /* asciicircum */
|
|
s->pre_map[0x0d ] = 0x12 | FN; /* equal */
|
|
s->pre_map[0x0d | SHIFT ] = 0x13 | FN; /* plus */
|
|
s->pre_map[0x1a ] = 0x14 | FN; /* bracketleft */
|
|
s->pre_map[0x1b ] = 0x15 | FN; /* bracketright */
|
|
s->pre_map[0x1a | SHIFT ] = 0x16 | FN; /* braceleft */
|
|
s->pre_map[0x1b | SHIFT ] = 0x17 | FN; /* braceright */
|
|
s->pre_map[0x27 ] = 0x22 | FN; /* semicolon */
|
|
s->pre_map[0x27 | SHIFT ] = 0x23 | FN; /* colon */
|
|
s->pre_map[0x09 | SHIFT ] = 0x24 | FN; /* asterisk */
|
|
s->pre_map[0x2b ] = 0x25 | FN; /* backslash */
|
|
s->pre_map[0x2b | SHIFT ] = 0x26 | FN; /* bar */
|
|
s->pre_map[0x0c | SHIFT ] = 0x30 | FN; /* underscore */
|
|
s->pre_map[0x33 | SHIFT ] = 0x33 | FN; /* less */
|
|
s->pre_map[0x35 ] = 0x33 | SHIFT; /* slash */
|
|
s->pre_map[0x34 | SHIFT ] = 0x34 | FN; /* greater */
|
|
s->pre_map[0x35 | SHIFT ] = 0x34 | SHIFT; /* question */
|
|
s->pre_map[0x49 ] = 0x48 | FN; /* Page_Up */
|
|
s->pre_map[0x51 ] = 0x50 | FN; /* Page_Down */
|
|
|
|
s->modifiers = 0;
|
|
s->imodifiers = 0;
|
|
s->fifopos = 0;
|
|
s->fifolen = 0;
|
|
}
|
|
|
|
#undef SHIFT
|
|
#undef CTRL
|
|
#undef FN
|
|
|
|
static int spitz_keyboard_post_load(void *opaque, int version_id)
|
|
{
|
|
SpitzKeyboardState *s = (SpitzKeyboardState *) opaque;
|
|
|
|
/* Release all pressed keys */
|
|
memset(s->keyrow, 0, sizeof(s->keyrow));
|
|
spitz_keyboard_sense_update(s);
|
|
s->modifiers = 0;
|
|
s->imodifiers = 0;
|
|
s->fifopos = 0;
|
|
s->fifolen = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spitz_keyboard_register(PXA2xxState *cpu)
|
|
{
|
|
int i;
|
|
DeviceState *dev;
|
|
SpitzKeyboardState *s;
|
|
|
|
dev = sysbus_create_simple("spitz-keyboard", -1, NULL);
|
|
s = FROM_SYSBUS(SpitzKeyboardState, sysbus_from_qdev(dev));
|
|
|
|
for (i = 0; i < SPITZ_KEY_SENSE_NUM; i ++)
|
|
qdev_connect_gpio_out(dev, i, qdev_get_gpio_in(cpu->gpio, spitz_gpio_key_sense[i]));
|
|
|
|
for (i = 0; i < 5; i ++)
|
|
s->gpiomap[i] = qdev_get_gpio_in(cpu->gpio, spitz_gpiomap[i]);
|
|
|
|
if (!graphic_rotate)
|
|
s->gpiomap[4] = qemu_irq_invert(s->gpiomap[4]);
|
|
|
|
for (i = 0; i < 5; i++)
|
|
qemu_set_irq(s->gpiomap[i], 0);
|
|
|
|
for (i = 0; i < SPITZ_KEY_STROBE_NUM; i ++)
|
|
qdev_connect_gpio_out(cpu->gpio, spitz_gpio_key_strobe[i],
|
|
qdev_get_gpio_in(dev, i));
|
|
|
|
qemu_mod_timer(s->kbdtimer, qemu_get_clock_ns(vm_clock));
|
|
|
|
qemu_add_kbd_event_handler(spitz_keyboard_handler, s);
|
|
}
|
|
|
|
static int spitz_keyboard_init(SysBusDevice *dev)
|
|
{
|
|
SpitzKeyboardState *s;
|
|
int i, j;
|
|
|
|
s = FROM_SYSBUS(SpitzKeyboardState, dev);
|
|
|
|
for (i = 0; i < 0x80; i ++)
|
|
s->keymap[i] = -1;
|
|
for (i = 0; i < SPITZ_KEY_SENSE_NUM + 1; i ++)
|
|
for (j = 0; j < SPITZ_KEY_STROBE_NUM; j ++)
|
|
if (spitz_keymap[i][j] != -1)
|
|
s->keymap[spitz_keymap[i][j]] = (i << 4) | j;
|
|
|
|
spitz_keyboard_pre_map(s);
|
|
|
|
s->kbdtimer = qemu_new_timer_ns(vm_clock, spitz_keyboard_tick, s);
|
|
qdev_init_gpio_in(&dev->qdev, spitz_keyboard_strobe, SPITZ_KEY_STROBE_NUM);
|
|
qdev_init_gpio_out(&dev->qdev, s->sense, SPITZ_KEY_SENSE_NUM);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* LCD backlight controller */
|
|
|
|
#define LCDTG_RESCTL 0x00
|
|
#define LCDTG_PHACTRL 0x01
|
|
#define LCDTG_DUTYCTRL 0x02
|
|
#define LCDTG_POWERREG0 0x03
|
|
#define LCDTG_POWERREG1 0x04
|
|
#define LCDTG_GPOR3 0x05
|
|
#define LCDTG_PICTRL 0x06
|
|
#define LCDTG_POLCTRL 0x07
|
|
|
|
typedef struct {
|
|
SSISlave ssidev;
|
|
uint32_t bl_intensity;
|
|
uint32_t bl_power;
|
|
} SpitzLCDTG;
|
|
|
|
static void spitz_bl_update(SpitzLCDTG *s)
|
|
{
|
|
if (s->bl_power && s->bl_intensity)
|
|
zaurus_printf("LCD Backlight now at %i/63\n", s->bl_intensity);
|
|
else
|
|
zaurus_printf("LCD Backlight now off\n");
|
|
}
|
|
|
|
/* FIXME: Implement GPIO properly and remove this hack. */
|
|
static SpitzLCDTG *spitz_lcdtg;
|
|
|
|
static inline void spitz_bl_bit5(void *opaque, int line, int level)
|
|
{
|
|
SpitzLCDTG *s = spitz_lcdtg;
|
|
int prev = s->bl_intensity;
|
|
|
|
if (level)
|
|
s->bl_intensity &= ~0x20;
|
|
else
|
|
s->bl_intensity |= 0x20;
|
|
|
|
if (s->bl_power && prev != s->bl_intensity)
|
|
spitz_bl_update(s);
|
|
}
|
|
|
|
static inline void spitz_bl_power(void *opaque, int line, int level)
|
|
{
|
|
SpitzLCDTG *s = spitz_lcdtg;
|
|
s->bl_power = !!level;
|
|
spitz_bl_update(s);
|
|
}
|
|
|
|
static uint32_t spitz_lcdtg_transfer(SSISlave *dev, uint32_t value)
|
|
{
|
|
SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev);
|
|
int addr;
|
|
addr = value >> 5;
|
|
value &= 0x1f;
|
|
|
|
switch (addr) {
|
|
case LCDTG_RESCTL:
|
|
if (value)
|
|
zaurus_printf("LCD in QVGA mode\n");
|
|
else
|
|
zaurus_printf("LCD in VGA mode\n");
|
|
break;
|
|
|
|
case LCDTG_DUTYCTRL:
|
|
s->bl_intensity &= ~0x1f;
|
|
s->bl_intensity |= value;
|
|
if (s->bl_power)
|
|
spitz_bl_update(s);
|
|
break;
|
|
|
|
case LCDTG_POWERREG0:
|
|
/* Set common voltage to M62332FP */
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int spitz_lcdtg_init(SSISlave *dev)
|
|
{
|
|
SpitzLCDTG *s = FROM_SSI_SLAVE(SpitzLCDTG, dev);
|
|
|
|
spitz_lcdtg = s;
|
|
s->bl_power = 0;
|
|
s->bl_intensity = 0x20;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* SSP devices */
|
|
|
|
#define CORGI_SSP_PORT 2
|
|
|
|
#define SPITZ_GPIO_LCDCON_CS 53
|
|
#define SPITZ_GPIO_ADS7846_CS 14
|
|
#define SPITZ_GPIO_MAX1111_CS 20
|
|
#define SPITZ_GPIO_TP_INT 11
|
|
|
|
static DeviceState *max1111;
|
|
|
|
/* "Demux" the signal based on current chipselect */
|
|
typedef struct {
|
|
SSISlave ssidev;
|
|
SSIBus *bus[3];
|
|
uint32_t enable[3];
|
|
} CorgiSSPState;
|
|
|
|
static uint32_t corgi_ssp_transfer(SSISlave *dev, uint32_t value)
|
|
{
|
|
CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev);
|
|
int i;
|
|
|
|
for (i = 0; i < 3; i++) {
|
|
if (s->enable[i]) {
|
|
return ssi_transfer(s->bus[i], value);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void corgi_ssp_gpio_cs(void *opaque, int line, int level)
|
|
{
|
|
CorgiSSPState *s = (CorgiSSPState *)opaque;
|
|
assert(line >= 0 && line < 3);
|
|
s->enable[line] = !level;
|
|
}
|
|
|
|
#define MAX1111_BATT_VOLT 1
|
|
#define MAX1111_BATT_TEMP 2
|
|
#define MAX1111_ACIN_VOLT 3
|
|
|
|
#define SPITZ_BATTERY_TEMP 0xe0 /* About 2.9V */
|
|
#define SPITZ_BATTERY_VOLT 0xd0 /* About 4.0V */
|
|
#define SPITZ_CHARGEON_ACIN 0x80 /* About 5.0V */
|
|
|
|
static void spitz_adc_temp_on(void *opaque, int line, int level)
|
|
{
|
|
if (!max1111)
|
|
return;
|
|
|
|
if (level)
|
|
max111x_set_input(max1111, MAX1111_BATT_TEMP, SPITZ_BATTERY_TEMP);
|
|
else
|
|
max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
|
|
}
|
|
|
|
static int corgi_ssp_init(SSISlave *dev)
|
|
{
|
|
CorgiSSPState *s = FROM_SSI_SLAVE(CorgiSSPState, dev);
|
|
|
|
qdev_init_gpio_in(&dev->qdev, corgi_ssp_gpio_cs, 3);
|
|
s->bus[0] = ssi_create_bus(&dev->qdev, "ssi0");
|
|
s->bus[1] = ssi_create_bus(&dev->qdev, "ssi1");
|
|
s->bus[2] = ssi_create_bus(&dev->qdev, "ssi2");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void spitz_ssp_attach(PXA2xxState *cpu)
|
|
{
|
|
DeviceState *mux;
|
|
DeviceState *dev;
|
|
void *bus;
|
|
|
|
mux = ssi_create_slave(cpu->ssp[CORGI_SSP_PORT - 1], "corgi-ssp");
|
|
|
|
bus = qdev_get_child_bus(mux, "ssi0");
|
|
ssi_create_slave(bus, "spitz-lcdtg");
|
|
|
|
bus = qdev_get_child_bus(mux, "ssi1");
|
|
dev = ssi_create_slave(bus, "ads7846");
|
|
qdev_connect_gpio_out(dev, 0,
|
|
qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_TP_INT));
|
|
|
|
bus = qdev_get_child_bus(mux, "ssi2");
|
|
max1111 = ssi_create_slave(bus, "max1111");
|
|
max111x_set_input(max1111, MAX1111_BATT_VOLT, SPITZ_BATTERY_VOLT);
|
|
max111x_set_input(max1111, MAX1111_BATT_TEMP, 0);
|
|
max111x_set_input(max1111, MAX1111_ACIN_VOLT, SPITZ_CHARGEON_ACIN);
|
|
|
|
qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_LCDCON_CS,
|
|
qdev_get_gpio_in(mux, 0));
|
|
qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ADS7846_CS,
|
|
qdev_get_gpio_in(mux, 1));
|
|
qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_MAX1111_CS,
|
|
qdev_get_gpio_in(mux, 2));
|
|
}
|
|
|
|
/* CF Microdrive */
|
|
|
|
static void spitz_microdrive_attach(PXA2xxState *cpu, int slot)
|
|
{
|
|
PCMCIACardState *md;
|
|
BlockDriverState *bs;
|
|
DriveInfo *dinfo;
|
|
|
|
dinfo = drive_get(IF_IDE, 0, 0);
|
|
if (!dinfo)
|
|
return;
|
|
bs = dinfo->bdrv;
|
|
if (bdrv_is_inserted(bs) && !bdrv_is_removable(bs)) {
|
|
md = dscm1xxxx_init(dinfo);
|
|
pxa2xx_pcmcia_attach(cpu->pcmcia[slot], md);
|
|
}
|
|
}
|
|
|
|
/* Wm8750 and Max7310 on I2C */
|
|
|
|
#define AKITA_MAX_ADDR 0x18
|
|
#define SPITZ_WM_ADDRL 0x1b
|
|
#define SPITZ_WM_ADDRH 0x1a
|
|
|
|
#define SPITZ_GPIO_WM 5
|
|
|
|
static void spitz_wm8750_addr(void *opaque, int line, int level)
|
|
{
|
|
i2c_slave *wm = (i2c_slave *) opaque;
|
|
if (level)
|
|
i2c_set_slave_address(wm, SPITZ_WM_ADDRH);
|
|
else
|
|
i2c_set_slave_address(wm, SPITZ_WM_ADDRL);
|
|
}
|
|
|
|
static void spitz_i2c_setup(PXA2xxState *cpu)
|
|
{
|
|
/* Attach the CPU on one end of our I2C bus. */
|
|
i2c_bus *bus = pxa2xx_i2c_bus(cpu->i2c[0]);
|
|
|
|
DeviceState *wm;
|
|
|
|
/* Attach a WM8750 to the bus */
|
|
wm = i2c_create_slave(bus, "wm8750", 0);
|
|
|
|
spitz_wm8750_addr(wm, 0, 0);
|
|
qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_WM,
|
|
qemu_allocate_irqs(spitz_wm8750_addr, wm, 1)[0]);
|
|
/* .. and to the sound interface. */
|
|
cpu->i2s->opaque = wm;
|
|
cpu->i2s->codec_out = wm8750_dac_dat;
|
|
cpu->i2s->codec_in = wm8750_adc_dat;
|
|
wm8750_data_req_set(wm, cpu->i2s->data_req, cpu->i2s);
|
|
}
|
|
|
|
static void spitz_akita_i2c_setup(PXA2xxState *cpu)
|
|
{
|
|
/* Attach a Max7310 to Akita I2C bus. */
|
|
i2c_create_slave(pxa2xx_i2c_bus(cpu->i2c[0]), "max7310",
|
|
AKITA_MAX_ADDR);
|
|
}
|
|
|
|
/* Other peripherals */
|
|
|
|
static void spitz_out_switch(void *opaque, int line, int level)
|
|
{
|
|
switch (line) {
|
|
case 0:
|
|
zaurus_printf("Charging %s.\n", level ? "off" : "on");
|
|
break;
|
|
case 1:
|
|
zaurus_printf("Discharging %s.\n", level ? "on" : "off");
|
|
break;
|
|
case 2:
|
|
zaurus_printf("Green LED %s.\n", level ? "on" : "off");
|
|
break;
|
|
case 3:
|
|
zaurus_printf("Orange LED %s.\n", level ? "on" : "off");
|
|
break;
|
|
case 4:
|
|
spitz_bl_bit5(opaque, line, level);
|
|
break;
|
|
case 5:
|
|
spitz_bl_power(opaque, line, level);
|
|
break;
|
|
case 6:
|
|
spitz_adc_temp_on(opaque, line, level);
|
|
break;
|
|
}
|
|
}
|
|
|
|
#define SPITZ_SCP_LED_GREEN 1
|
|
#define SPITZ_SCP_JK_B 2
|
|
#define SPITZ_SCP_CHRG_ON 3
|
|
#define SPITZ_SCP_MUTE_L 4
|
|
#define SPITZ_SCP_MUTE_R 5
|
|
#define SPITZ_SCP_CF_POWER 6
|
|
#define SPITZ_SCP_LED_ORANGE 7
|
|
#define SPITZ_SCP_JK_A 8
|
|
#define SPITZ_SCP_ADC_TEMP_ON 9
|
|
#define SPITZ_SCP2_IR_ON 1
|
|
#define SPITZ_SCP2_AKIN_PULLUP 2
|
|
#define SPITZ_SCP2_BACKLIGHT_CONT 7
|
|
#define SPITZ_SCP2_BACKLIGHT_ON 8
|
|
#define SPITZ_SCP2_MIC_BIAS 9
|
|
|
|
static void spitz_scoop_gpio_setup(PXA2xxState *cpu,
|
|
DeviceState *scp0, DeviceState *scp1)
|
|
{
|
|
qemu_irq *outsignals = qemu_allocate_irqs(spitz_out_switch, cpu, 8);
|
|
|
|
qdev_connect_gpio_out(scp0, SPITZ_SCP_CHRG_ON, outsignals[0]);
|
|
qdev_connect_gpio_out(scp0, SPITZ_SCP_JK_B, outsignals[1]);
|
|
qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_GREEN, outsignals[2]);
|
|
qdev_connect_gpio_out(scp0, SPITZ_SCP_LED_ORANGE, outsignals[3]);
|
|
|
|
if (scp1) {
|
|
qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_CONT, outsignals[4]);
|
|
qdev_connect_gpio_out(scp1, SPITZ_SCP2_BACKLIGHT_ON, outsignals[5]);
|
|
}
|
|
|
|
qdev_connect_gpio_out(scp0, SPITZ_SCP_ADC_TEMP_ON, outsignals[6]);
|
|
}
|
|
|
|
#define SPITZ_GPIO_HSYNC 22
|
|
#define SPITZ_GPIO_SD_DETECT 9
|
|
#define SPITZ_GPIO_SD_WP 81
|
|
#define SPITZ_GPIO_ON_RESET 89
|
|
#define SPITZ_GPIO_BAT_COVER 90
|
|
#define SPITZ_GPIO_CF1_IRQ 105
|
|
#define SPITZ_GPIO_CF1_CD 94
|
|
#define SPITZ_GPIO_CF2_IRQ 106
|
|
#define SPITZ_GPIO_CF2_CD 93
|
|
|
|
static int spitz_hsync;
|
|
|
|
static void spitz_lcd_hsync_handler(void *opaque, int line, int level)
|
|
{
|
|
PXA2xxState *cpu = (PXA2xxState *) opaque;
|
|
qemu_set_irq(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_HSYNC), spitz_hsync);
|
|
spitz_hsync ^= 1;
|
|
}
|
|
|
|
static void spitz_gpio_setup(PXA2xxState *cpu, int slots)
|
|
{
|
|
qemu_irq lcd_hsync;
|
|
/*
|
|
* Bad hack: We toggle the LCD hsync GPIO on every GPIO status
|
|
* read to satisfy broken guests that poll-wait for hsync.
|
|
* Simulating a real hsync event would be less practical and
|
|
* wouldn't guarantee that a guest ever exits the loop.
|
|
*/
|
|
spitz_hsync = 0;
|
|
lcd_hsync = qemu_allocate_irqs(spitz_lcd_hsync_handler, cpu, 1)[0];
|
|
pxa2xx_gpio_read_notifier(cpu->gpio, lcd_hsync);
|
|
pxa2xx_lcd_vsync_notifier(cpu->lcd, lcd_hsync);
|
|
|
|
/* MMC/SD host */
|
|
pxa2xx_mmci_handlers(cpu->mmc,
|
|
qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_WP),
|
|
qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_SD_DETECT));
|
|
|
|
/* Battery lock always closed */
|
|
qemu_irq_raise(qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_BAT_COVER));
|
|
|
|
/* Handle reset */
|
|
qdev_connect_gpio_out(cpu->gpio, SPITZ_GPIO_ON_RESET, cpu->reset);
|
|
|
|
/* PCMCIA signals: card's IRQ and Card-Detect */
|
|
if (slots >= 1)
|
|
pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[0],
|
|
qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_IRQ),
|
|
qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF1_CD));
|
|
if (slots >= 2)
|
|
pxa2xx_pcmcia_set_irq_cb(cpu->pcmcia[1],
|
|
qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_IRQ),
|
|
qdev_get_gpio_in(cpu->gpio, SPITZ_GPIO_CF2_CD));
|
|
}
|
|
|
|
/* Board init. */
|
|
enum spitz_model_e { spitz, akita, borzoi, terrier };
|
|
|
|
#define SPITZ_RAM 0x04000000
|
|
#define SPITZ_ROM 0x00800000
|
|
|
|
static struct arm_boot_info spitz_binfo = {
|
|
.loader_start = PXA2XX_SDRAM_BASE,
|
|
.ram_size = 0x04000000,
|
|
};
|
|
|
|
static void spitz_common_init(ram_addr_t ram_size,
|
|
const char *kernel_filename,
|
|
const char *kernel_cmdline, const char *initrd_filename,
|
|
const char *cpu_model, enum spitz_model_e model, int arm_id)
|
|
{
|
|
PXA2xxState *cpu;
|
|
DeviceState *scp0, *scp1 = NULL;
|
|
|
|
if (!cpu_model)
|
|
cpu_model = (model == terrier) ? "pxa270-c5" : "pxa270-c0";
|
|
|
|
/* Setup CPU & memory */
|
|
cpu = pxa270_init(spitz_binfo.ram_size, cpu_model);
|
|
|
|
sl_flash_register(cpu, (model == spitz) ? FLASH_128M : FLASH_1024M);
|
|
|
|
cpu_register_physical_memory(0, SPITZ_ROM,
|
|
qemu_ram_alloc(NULL, "spitz.rom", SPITZ_ROM) | IO_MEM_ROM);
|
|
|
|
/* Setup peripherals */
|
|
spitz_keyboard_register(cpu);
|
|
|
|
spitz_ssp_attach(cpu);
|
|
|
|
scp0 = sysbus_create_simple("scoop", 0x10800000, NULL);
|
|
if (model != akita) {
|
|
scp1 = sysbus_create_simple("scoop", 0x08800040, NULL);
|
|
}
|
|
|
|
spitz_scoop_gpio_setup(cpu, scp0, scp1);
|
|
|
|
spitz_gpio_setup(cpu, (model == akita) ? 1 : 2);
|
|
|
|
spitz_i2c_setup(cpu);
|
|
|
|
if (model == akita)
|
|
spitz_akita_i2c_setup(cpu);
|
|
|
|
if (model == terrier)
|
|
/* A 6.0 GB microdrive is permanently sitting in CF slot 1. */
|
|
spitz_microdrive_attach(cpu, 1);
|
|
else if (model != akita)
|
|
/* A 4.0 GB microdrive is permanently sitting in CF slot 0. */
|
|
spitz_microdrive_attach(cpu, 0);
|
|
|
|
spitz_binfo.kernel_filename = kernel_filename;
|
|
spitz_binfo.kernel_cmdline = kernel_cmdline;
|
|
spitz_binfo.initrd_filename = initrd_filename;
|
|
spitz_binfo.board_id = arm_id;
|
|
arm_load_kernel(cpu->env, &spitz_binfo);
|
|
sl_bootparam_write(SL_PXA_PARAM_BASE);
|
|
}
|
|
|
|
static void spitz_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
spitz_common_init(ram_size, kernel_filename,
|
|
kernel_cmdline, initrd_filename, cpu_model, spitz, 0x2c9);
|
|
}
|
|
|
|
static void borzoi_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
spitz_common_init(ram_size, kernel_filename,
|
|
kernel_cmdline, initrd_filename, cpu_model, borzoi, 0x33f);
|
|
}
|
|
|
|
static void akita_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
spitz_common_init(ram_size, kernel_filename,
|
|
kernel_cmdline, initrd_filename, cpu_model, akita, 0x2e8);
|
|
}
|
|
|
|
static void terrier_init(ram_addr_t ram_size,
|
|
const char *boot_device,
|
|
const char *kernel_filename, const char *kernel_cmdline,
|
|
const char *initrd_filename, const char *cpu_model)
|
|
{
|
|
spitz_common_init(ram_size, kernel_filename,
|
|
kernel_cmdline, initrd_filename, cpu_model, terrier, 0x33f);
|
|
}
|
|
|
|
static QEMUMachine akitapda_machine = {
|
|
.name = "akita",
|
|
.desc = "Akita PDA (PXA270)",
|
|
.init = akita_init,
|
|
};
|
|
|
|
static QEMUMachine spitzpda_machine = {
|
|
.name = "spitz",
|
|
.desc = "Spitz PDA (PXA270)",
|
|
.init = spitz_init,
|
|
};
|
|
|
|
static QEMUMachine borzoipda_machine = {
|
|
.name = "borzoi",
|
|
.desc = "Borzoi PDA (PXA270)",
|
|
.init = borzoi_init,
|
|
};
|
|
|
|
static QEMUMachine terrierpda_machine = {
|
|
.name = "terrier",
|
|
.desc = "Terrier PDA (PXA270)",
|
|
.init = terrier_init,
|
|
};
|
|
|
|
static void spitz_machine_init(void)
|
|
{
|
|
qemu_register_machine(&akitapda_machine);
|
|
qemu_register_machine(&spitzpda_machine);
|
|
qemu_register_machine(&borzoipda_machine);
|
|
qemu_register_machine(&terrierpda_machine);
|
|
}
|
|
|
|
machine_init(spitz_machine_init);
|
|
|
|
static bool is_version_0(void *opaque, int version_id)
|
|
{
|
|
return version_id == 0;
|
|
}
|
|
|
|
static VMStateDescription vmstate_sl_nand_info = {
|
|
.name = "sl-nand",
|
|
.version_id = 0,
|
|
.minimum_version_id = 0,
|
|
.minimum_version_id_old = 0,
|
|
.fields = (VMStateField []) {
|
|
VMSTATE_UINT8(ctl, SLNANDState),
|
|
VMSTATE_STRUCT(ecc, SLNANDState, 0, vmstate_ecc_state, ECCState),
|
|
VMSTATE_END_OF_LIST(),
|
|
},
|
|
};
|
|
|
|
static SysBusDeviceInfo sl_nand_info = {
|
|
.init = sl_nand_init,
|
|
.qdev.name = "sl-nand",
|
|
.qdev.size = sizeof(SLNANDState),
|
|
.qdev.vmsd = &vmstate_sl_nand_info,
|
|
.qdev.props = (Property []) {
|
|
DEFINE_PROP_UINT8("manf_id", SLNANDState, manf_id, NAND_MFR_SAMSUNG),
|
|
DEFINE_PROP_UINT8("chip_id", SLNANDState, chip_id, 0xf1),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
},
|
|
};
|
|
|
|
static VMStateDescription vmstate_spitz_kbd = {
|
|
.name = "spitz-keyboard",
|
|
.version_id = 1,
|
|
.minimum_version_id = 0,
|
|
.minimum_version_id_old = 0,
|
|
.post_load = spitz_keyboard_post_load,
|
|
.fields = (VMStateField []) {
|
|
VMSTATE_UINT16(sense_state, SpitzKeyboardState),
|
|
VMSTATE_UINT16(strobe_state, SpitzKeyboardState),
|
|
VMSTATE_UNUSED_TEST(is_version_0, 5),
|
|
VMSTATE_END_OF_LIST(),
|
|
},
|
|
};
|
|
|
|
static SysBusDeviceInfo spitz_keyboard_info = {
|
|
.init = spitz_keyboard_init,
|
|
.qdev.name = "spitz-keyboard",
|
|
.qdev.size = sizeof(SpitzKeyboardState),
|
|
.qdev.vmsd = &vmstate_spitz_kbd,
|
|
.qdev.props = (Property []) {
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
},
|
|
};
|
|
|
|
static const VMStateDescription vmstate_corgi_ssp_regs = {
|
|
.name = "corgi-ssp",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.minimum_version_id_old = 1,
|
|
.fields = (VMStateField []) {
|
|
VMSTATE_UINT32_ARRAY(enable, CorgiSSPState, 3),
|
|
VMSTATE_END_OF_LIST(),
|
|
}
|
|
};
|
|
|
|
static SSISlaveInfo corgi_ssp_info = {
|
|
.qdev.name = "corgi-ssp",
|
|
.qdev.size = sizeof(CorgiSSPState),
|
|
.qdev.vmsd = &vmstate_corgi_ssp_regs,
|
|
.init = corgi_ssp_init,
|
|
.transfer = corgi_ssp_transfer
|
|
};
|
|
|
|
static const VMStateDescription vmstate_spitz_lcdtg_regs = {
|
|
.name = "spitz-lcdtg",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.minimum_version_id_old = 1,
|
|
.fields = (VMStateField []) {
|
|
VMSTATE_UINT32(bl_intensity, SpitzLCDTG),
|
|
VMSTATE_UINT32(bl_power, SpitzLCDTG),
|
|
VMSTATE_END_OF_LIST(),
|
|
}
|
|
};
|
|
|
|
static SSISlaveInfo spitz_lcdtg_info = {
|
|
.qdev.name = "spitz-lcdtg",
|
|
.qdev.size = sizeof(SpitzLCDTG),
|
|
.qdev.vmsd = &vmstate_spitz_lcdtg_regs,
|
|
.init = spitz_lcdtg_init,
|
|
.transfer = spitz_lcdtg_transfer
|
|
};
|
|
|
|
static void spitz_register_devices(void)
|
|
{
|
|
ssi_register_slave(&corgi_ssp_info);
|
|
ssi_register_slave(&spitz_lcdtg_info);
|
|
sysbus_register_withprop(&spitz_keyboard_info);
|
|
sysbus_register_withprop(&sl_nand_info);
|
|
}
|
|
|
|
device_init(spitz_register_devices)
|