The tracetool parser only picks up PRI*64 and other format string macros when enclosed between double quoted strings. Lift this restriction by extracting everything after the closing ')' as the format string: cpu_set_apic_base(uint64_t val) "%016"PRIx64 ^^ ^^ One trick here: it turns out that backslashes in the format string like "\n" were being interpreted by echo(1). Fix this by using the POSIX printf(1) command instead. Although it normally does not make sense to include backslashes in trace event format strings, an injected newline causes tracetool to emit a broken header file and I want to eliminate cases where broken output is emitted, even if the input was bad. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
230 lines
8.3 KiB
Plaintext
230 lines
8.3 KiB
Plaintext
= Tracing =
|
|
|
|
== Introduction ==
|
|
|
|
This document describes the tracing infrastructure in QEMU and how to use it
|
|
for debugging, profiling, and observing execution.
|
|
|
|
== Quickstart ==
|
|
|
|
1. Build with the 'simple' trace backend:
|
|
|
|
./configure --trace-backend=simple
|
|
make
|
|
|
|
2. Create a file with the events you want to trace:
|
|
|
|
echo bdrv_aio_readv > /tmp/events
|
|
echo bdrv_aio_writev >> /tmp/events
|
|
|
|
3. Run the virtual machine to produce a trace file:
|
|
|
|
qemu -trace events=/tmp/events ... # your normal QEMU invocation
|
|
|
|
4. Pretty-print the binary trace file:
|
|
|
|
./simpletrace.py trace-events trace-*
|
|
|
|
== Trace events ==
|
|
|
|
There is a set of static trace events declared in the "trace-events" source
|
|
file. Each trace event declaration names the event, its arguments, and the
|
|
format string which can be used for pretty-printing:
|
|
|
|
qemu_malloc(size_t size, void *ptr) "size %zu ptr %p"
|
|
qemu_free(void *ptr) "ptr %p"
|
|
|
|
The "trace-events" file is processed by the "tracetool" script during build to
|
|
generate code for the trace events. Trace events are invoked directly from
|
|
source code like this:
|
|
|
|
#include "trace.h" /* needed for trace event prototype */
|
|
|
|
void *qemu_malloc(size_t size)
|
|
{
|
|
void *ptr;
|
|
if (!size && !allow_zero_malloc()) {
|
|
abort();
|
|
}
|
|
ptr = oom_check(malloc(size ? size : 1));
|
|
trace_qemu_malloc(size, ptr); /* <-- trace event */
|
|
return ptr;
|
|
}
|
|
|
|
=== Declaring trace events ===
|
|
|
|
The "tracetool" script produces the trace.h header file which is included by
|
|
every source file that uses trace events. Since many source files include
|
|
trace.h, it uses a minimum of types and other header files included to keep the
|
|
namespace clean and compile times and dependencies down.
|
|
|
|
Trace events should use types as follows:
|
|
|
|
* Use stdint.h types for fixed-size types. Most offsets and guest memory
|
|
addresses are best represented with uint32_t or uint64_t. Use fixed-size
|
|
types over primitive types whose size may change depending on the host
|
|
(32-bit versus 64-bit) so trace events don't truncate values or break
|
|
the build.
|
|
|
|
* Use void * for pointers to structs or for arrays. The trace.h header
|
|
cannot include all user-defined struct declarations and it is therefore
|
|
necessary to use void * for pointers to structs.
|
|
|
|
Pointers (including char *) cannot be dereferenced easily (or at all) in
|
|
some trace backends. If pointers are used, ensure they are meaningful by
|
|
themselves and do not assume the data they point to will be traced. Do
|
|
not pass in string arguments.
|
|
|
|
* For everything else, use primitive scalar types (char, int, long) with the
|
|
appropriate signedness.
|
|
|
|
Format strings should reflect the types defined in the trace event. Take
|
|
special care to use PRId64 and PRIu64 for int64_t and uint64_t types,
|
|
respectively. This ensures portability between 32- and 64-bit platforms.
|
|
|
|
=== Hints for adding new trace events ===
|
|
|
|
1. Trace state changes in the code. Interesting points in the code usually
|
|
involve a state change like starting, stopping, allocating, freeing. State
|
|
changes are good trace events because they can be used to understand the
|
|
execution of the system.
|
|
|
|
2. Trace guest operations. Guest I/O accesses like reading device registers
|
|
are good trace events because they can be used to understand guest
|
|
interactions.
|
|
|
|
3. Use correlator fields so the context of an individual line of trace output
|
|
can be understood. For example, trace the pointer returned by malloc and
|
|
used as an argument to free. This way mallocs and frees can be matched up.
|
|
Trace events with no context are not very useful.
|
|
|
|
4. Name trace events after their function. If there are multiple trace events
|
|
in one function, append a unique distinguisher at the end of the name.
|
|
|
|
5. If specific trace events are going to be called a huge number of times, this
|
|
might have a noticeable performance impact even when the trace events are
|
|
programmatically disabled. In this case you should declare the trace event
|
|
with the "disable" property, which will effectively disable it at compile
|
|
time (using the "nop" backend).
|
|
|
|
== Generic interface and monitor commands ==
|
|
|
|
You can programmatically query and control the dynamic state of trace events
|
|
through a backend-agnostic interface:
|
|
|
|
* trace_print_events
|
|
|
|
* trace_event_set_state
|
|
Enables or disables trace events at runtime inside QEMU.
|
|
The function returns "true" if the state of the event has been successfully
|
|
changed, or "false" otherwise:
|
|
|
|
#include "trace/control.h"
|
|
|
|
trace_event_set_state("virtio_irq", true); /* enable */
|
|
[...]
|
|
trace_event_set_state("virtio_irq", false); /* disable */
|
|
|
|
Note that some of the backends do not provide an implementation for this
|
|
interface, in which case QEMU will just print a warning.
|
|
|
|
This functionality is also provided through monitor commands:
|
|
|
|
* info trace-events
|
|
View available trace events and their state. State 1 means enabled, state 0
|
|
means disabled.
|
|
|
|
* trace-event NAME on|off
|
|
Enable/disable a given trace event.
|
|
|
|
The "-trace events=<file>" command line argument can be used to enable the
|
|
events listed in <file> from the very beginning of the program. This file must
|
|
contain one event name per line.
|
|
|
|
== Trace backends ==
|
|
|
|
The "tracetool" script automates tedious trace event code generation and also
|
|
keeps the trace event declarations independent of the trace backend. The trace
|
|
events are not tightly coupled to a specific trace backend, such as LTTng or
|
|
SystemTap. Support for trace backends can be added by extending the "tracetool"
|
|
script.
|
|
|
|
The trace backend is chosen at configure time and only one trace backend can
|
|
be built into the binary:
|
|
|
|
./configure --trace-backend=simple
|
|
|
|
For a list of supported trace backends, try ./configure --help or see below.
|
|
|
|
The following subsections describe the supported trace backends.
|
|
|
|
=== Nop ===
|
|
|
|
The "nop" backend generates empty trace event functions so that the compiler
|
|
can optimize out trace events completely. This is the default and imposes no
|
|
performance penalty.
|
|
|
|
Note that regardless of the selected trace backend, events with the "disable"
|
|
property will be generated with the "nop" backend.
|
|
|
|
=== Stderr ===
|
|
|
|
The "stderr" backend sends trace events directly to standard error. This
|
|
effectively turns trace events into debug printfs.
|
|
|
|
This is the simplest backend and can be used together with existing code that
|
|
uses DPRINTF().
|
|
|
|
=== Simpletrace ===
|
|
|
|
The "simple" backend supports common use cases and comes as part of the QEMU
|
|
source tree. It may not be as powerful as platform-specific or third-party
|
|
trace backends but it is portable. This is the recommended trace backend
|
|
unless you have specific needs for more advanced backends.
|
|
|
|
==== Monitor commands ====
|
|
|
|
* info trace
|
|
Display the contents of trace buffer. This command dumps the trace buffer
|
|
with simple formatting. For full pretty-printing, use the simpletrace.py
|
|
script on a binary trace file.
|
|
|
|
The trace buffer is written into until full. The full trace buffer is
|
|
flushed and emptied. This means the 'info trace' will display few or no
|
|
entries if the buffer has just been flushed.
|
|
|
|
* trace-file on|off|flush|set <path>
|
|
Enable/disable/flush the trace file or set the trace file name.
|
|
|
|
==== Analyzing trace files ====
|
|
|
|
The "simple" backend produces binary trace files that can be formatted with the
|
|
simpletrace.py script. The script takes the "trace-events" file and the binary
|
|
trace:
|
|
|
|
./simpletrace.py trace-events trace-12345
|
|
|
|
You must ensure that the same "trace-events" file was used to build QEMU,
|
|
otherwise trace event declarations may have changed and output will not be
|
|
consistent.
|
|
|
|
=== LTTng Userspace Tracer ===
|
|
|
|
The "ust" backend uses the LTTng Userspace Tracer library. There are no
|
|
monitor commands built into QEMU, instead UST utilities should be used to list,
|
|
enable/disable, and dump traces.
|
|
|
|
=== SystemTap ===
|
|
|
|
The "dtrace" backend uses DTrace sdt probes but has only been tested with
|
|
SystemTap. When SystemTap support is detected a .stp file with wrapper probes
|
|
is generated to make use in scripts more convenient. This step can also be
|
|
performed manually after a build in order to change the binary name in the .stp
|
|
probes:
|
|
|
|
scripts/tracetool --dtrace --stap \
|
|
--binary path/to/qemu-binary \
|
|
--target-type system \
|
|
--target-arch x86_64 \
|
|
<trace-events >qemu.stp
|