Allow user supplied files to be inserted into the fw_cfg device before starting the guest. Since fw_cfg_add_file() already disallows duplicate fw_cfg file names, qemu will exit with an error message if the user supplies multiple blobs with the same fw_cfg file name, or if a blob name collides with a fw_cfg name programmatically added from within the QEMU source code. A warning message will be printed if the fw_cfg item name does not begin with the prefix "opt/", which is recommended for external, user provided blobs. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
227 lines
9.2 KiB
Plaintext
227 lines
9.2 KiB
Plaintext
QEMU Firmware Configuration (fw_cfg) Device
|
|
===========================================
|
|
|
|
= Guest-side Hardware Interface =
|
|
|
|
This hardware interface allows the guest to retrieve various data items
|
|
(blobs) that can influence how the firmware configures itself, or may
|
|
contain tables to be installed for the guest OS. Examples include device
|
|
boot order, ACPI and SMBIOS tables, virtual machine UUID, SMP and NUMA
|
|
information, kernel/initrd images for direct (Linux) kernel booting, etc.
|
|
|
|
== Selector (Control) Register ==
|
|
|
|
* Write only
|
|
* Location: platform dependent (IOport or MMIO)
|
|
* Width: 16-bit
|
|
* Endianness: little-endian (if IOport), or big-endian (if MMIO)
|
|
|
|
A write to this register sets the index of a firmware configuration
|
|
item which can subsequently be accessed via the data register.
|
|
|
|
Setting the selector register will cause the data offset to be set
|
|
to zero. The data offset impacts which data is accessed via the data
|
|
register, and is explained below.
|
|
|
|
Bit14 of the selector register indicates whether the configuration
|
|
setting is being written. A value of 0 means the item is only being
|
|
read, and all write access to the data port will be ignored. A value
|
|
of 1 means the item's data can be overwritten by writes to the data
|
|
register. In other words, configuration write mode is enabled when
|
|
the selector value is between 0x4000-0x7fff or 0xc000-0xffff.
|
|
|
|
NOTE: As of QEMU v2.4, writes to the fw_cfg data register are no
|
|
longer supported, and will be ignored (treated as no-ops)!
|
|
|
|
Bit15 of the selector register indicates whether the configuration
|
|
setting is architecture specific. A value of 0 means the item is a
|
|
generic configuration item. A value of 1 means the item is specific
|
|
to a particular architecture. In other words, generic configuration
|
|
items are accessed with a selector value between 0x0000-0x7fff, and
|
|
architecture specific configuration items are accessed with a selector
|
|
value between 0x8000-0xffff.
|
|
|
|
== Data Register ==
|
|
|
|
* Read/Write (writes ignored as of QEMU v2.4)
|
|
* Location: platform dependent (IOport [*] or MMIO)
|
|
* Width: 8-bit (if IOport), 8/16/32/64-bit (if MMIO)
|
|
* Endianness: string-preserving
|
|
|
|
[*] On platforms where the data register is exposed as an IOport, its
|
|
port number will always be one greater than the port number of the
|
|
selector register. In other words, the two ports overlap, and can not
|
|
be mapped separately.
|
|
|
|
The data register allows access to an array of bytes for each firmware
|
|
configuration data item. The specific item is selected by writing to
|
|
the selector register, as described above.
|
|
|
|
Initially following a write to the selector register, the data offset
|
|
will be set to zero. Each successful access to the data register will
|
|
increment the data offset by the appropriate access width.
|
|
|
|
Each firmware configuration item has a maximum length of data
|
|
associated with the item. After the data offset has passed the
|
|
end of this maximum data length, then any reads will return a data
|
|
value of 0x00, and all writes will be ignored.
|
|
|
|
An N-byte wide read of the data register will return the next available
|
|
N bytes of the selected firmware configuration item, as a substring, in
|
|
increasing address order, similar to memcpy().
|
|
|
|
== Register Locations ==
|
|
|
|
=== x86, x86_64 Register Locations ===
|
|
|
|
Selector Register IOport: 0x510
|
|
Data Register IOport: 0x511
|
|
|
|
== Firmware Configuration Items ==
|
|
|
|
=== Signature (Key 0x0000, FW_CFG_SIGNATURE) ===
|
|
|
|
The presence of the fw_cfg selector and data registers can be verified
|
|
by selecting the "signature" item using key 0x0000 (FW_CFG_SIGNATURE),
|
|
and reading four bytes from the data register. If the fw_cfg device is
|
|
present, the four bytes read will contain the characters "QEMU".
|
|
|
|
=== Revision (Key 0x0001, FW_CFG_ID) ===
|
|
|
|
A 32-bit little-endian unsigned int, this item is used as an interface
|
|
revision number, and is currently set to 1 by QEMU when fw_cfg is
|
|
initialized.
|
|
|
|
=== File Directory (Key 0x0019, FW_CFG_FILE_DIR) ===
|
|
|
|
Firmware configuration items stored at selector keys 0x0020 or higher
|
|
(FW_CFG_FILE_FIRST or higher) have an associated entry in a directory
|
|
structure, which makes it easier for guest-side firmware to identify
|
|
and retrieve them. The format of this file directory (from fw_cfg.h in
|
|
the QEMU source tree) is shown here, slightly annotated for clarity:
|
|
|
|
struct FWCfgFiles { /* the entire file directory fw_cfg item */
|
|
uint32_t count; /* number of entries, in big-endian format */
|
|
struct FWCfgFile f[]; /* array of file entries, see below */
|
|
};
|
|
|
|
struct FWCfgFile { /* an individual file entry, 64 bytes total */
|
|
uint32_t size; /* size of referenced fw_cfg item, big-endian */
|
|
uint16_t select; /* selector key of fw_cfg item, big-endian */
|
|
uint16_t reserved;
|
|
char name[56]; /* fw_cfg item name, NUL-terminated ascii */
|
|
};
|
|
|
|
=== All Other Data Items ===
|
|
|
|
Please consult the QEMU source for the most up-to-date and authoritative
|
|
list of selector keys and their respective items' purpose and format.
|
|
|
|
=== Ranges ===
|
|
|
|
Theoretically, there may be up to 0x4000 generic firmware configuration
|
|
items, and up to 0x4000 architecturally specific ones.
|
|
|
|
Selector Reg. Range Usage
|
|
--------------- -----------
|
|
0x0000 - 0x3fff Generic (0x0000 - 0x3fff, RO)
|
|
0x4000 - 0x7fff Generic (0x0000 - 0x3fff, RW, ignored in QEMU v2.4+)
|
|
0x8000 - 0xbfff Arch. Specific (0x0000 - 0x3fff, RO)
|
|
0xc000 - 0xffff Arch. Specific (0x0000 - 0x3fff, RW, ignored in v2.4+)
|
|
|
|
In practice, the number of allowed firmware configuration items is given
|
|
by the value of FW_CFG_MAX_ENTRY (see fw_cfg.h).
|
|
|
|
= Host-side API =
|
|
|
|
The following functions are available to the QEMU programmer for adding
|
|
data to a fw_cfg device during guest initialization (see fw_cfg.h for
|
|
each function's complete prototype):
|
|
|
|
== fw_cfg_add_bytes() ==
|
|
|
|
Given a selector key value, starting pointer, and size, create an item
|
|
as a raw "blob" of the given size, available by selecting the given key.
|
|
The data referenced by the starting pointer is only linked, NOT copied,
|
|
into the data structure of the fw_cfg device.
|
|
|
|
== fw_cfg_add_string() ==
|
|
|
|
Instead of a starting pointer and size, this function accepts a pointer
|
|
to a NUL-terminated ascii string, and inserts a newly allocated copy of
|
|
the string (including the NUL terminator) into the fw_cfg device data
|
|
structure.
|
|
|
|
== fw_cfg_add_iXX() ==
|
|
|
|
Insert an XX-bit item, where XX may be 16, 32, or 64. These functions
|
|
will convert a 16-, 32-, or 64-bit integer to little-endian, then add
|
|
a dynamically allocated copy of the appropriately sized item to fw_cfg
|
|
under the given selector key value.
|
|
|
|
== fw_cfg_add_file() ==
|
|
|
|
Given a filename (i.e., fw_cfg item name), starting pointer, and size,
|
|
create an item as a raw "blob" of the given size. Unlike fw_cfg_add_bytes()
|
|
above, the next available selector key (above 0x0020, FW_CFG_FILE_FIRST)
|
|
will be used, and a new entry will be added to the file directory structure
|
|
(at key 0x0019), containing the item name, blob size, and automatically
|
|
assigned selector key value. The data referenced by the starting pointer
|
|
is only linked, NOT copied, into the fw_cfg data structure.
|
|
|
|
== fw_cfg_add_file_callback() ==
|
|
|
|
Like fw_cfg_add_file(), but additionally sets pointers to a callback
|
|
function (and opaque argument), which will be executed host-side by
|
|
QEMU each time a byte is read by the guest from this particular item.
|
|
|
|
NOTE: The callback function is given the opaque argument set by
|
|
fw_cfg_add_file_callback(), but also the current data offset,
|
|
allowing it the option of only acting upon specific offset values
|
|
(e.g., 0, before the first data byte of the selected item is
|
|
returned to the guest).
|
|
|
|
== fw_cfg_modify_file() ==
|
|
|
|
Given a filename (i.e., fw_cfg item name), starting pointer, and size,
|
|
completely replace the configuration item referenced by the given item
|
|
name with the new given blob. If an existing blob is found, its
|
|
callback information is removed, and a pointer to the old data is
|
|
returned to allow the caller to free it, helping avoid memory leaks.
|
|
If a configuration item does not already exist under the given item
|
|
name, a new item will be created as with fw_cfg_add_file(), and NULL
|
|
is returned to the caller. In any case, the data referenced by the
|
|
starting pointer is only linked, NOT copied, into the fw_cfg data
|
|
structure.
|
|
|
|
== fw_cfg_add_callback() ==
|
|
|
|
Like fw_cfg_add_bytes(), but additionally sets pointers to a callback
|
|
function (and opaque argument), which will be executed host-side by
|
|
QEMU each time a guest-side write operation to this particular item
|
|
completes fully overwriting the item's data.
|
|
|
|
NOTE: This function is deprecated, and will be completely removed
|
|
starting with QEMU v2.4.
|
|
|
|
== Externally Provided Items ==
|
|
|
|
As of v2.4, "file" fw_cfg items (i.e., items with selector keys above
|
|
FW_CFG_FILE_FIRST, and with a corresponding entry in the fw_cfg file
|
|
directory structure) may be inserted via the QEMU command line, using
|
|
the following syntax:
|
|
|
|
-fw_cfg [name=]<item_name>,file=<path>
|
|
|
|
where <item_name> is the fw_cfg item name, and <path> is the location
|
|
on the host file system of a file containing the data to be inserted.
|
|
|
|
NOTE: Users *SHOULD* choose item names beginning with the prefix "opt/"
|
|
when using the "-fw_cfg" command line option, to avoid conflicting with
|
|
item names used internally by QEMU. For instance:
|
|
|
|
-fw_cfg name=opt/my_item_name,file=./my_blob.bin
|
|
|
|
Similarly, QEMU developers *SHOULD NOT* use item names prefixed with
|
|
"opt/" when inserting items programmatically, e.g. via fw_cfg_add_file().
|