haraldwolff/qemu-patch-raspberry4
1
0
Fork 0
Code Issues Pull requests Packages Projects Releases Wiki Activity
qemu-patch-raspberry4/hw/arm/aspeed.c
Cédric Le Goater 93bf276d5f aspeed: remove useless comment on controller segment size 
The flash devices used for the FMC controller (BMC firmware) are well
defined for each Aspeed machine and are all smaller than the default
mapping window size, at least for CE0 which is the chip the SoC boots
from.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 1486648058-520-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-02-10 17:40:29 +00:00

309 lines
10 KiB
C
Raw Blame History

/*
* OpenPOWER Palmetto BMC
*
* Andrew Jeffery <andrew@aj.id.au>
*
* Copyright 2016 IBM Corp.
*
* This code is licensed under the GPL version 2 or later. See
* the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "exec/address-spaces.h"
#include "hw/arm/arm.h"
#include "hw/arm/aspeed_soc.h"
#include "hw/boards.h"
#include "qemu/log.h"
#include "sysemu/block-backend.h"
#include "sysemu/blockdev.h"
#include "hw/loader.h"
#include "qemu/error-report.h"
static struct arm_boot_info aspeed_board_binfo = {
.board_id = -1, /* device-tree-only board */
.nb_cpus = 1,
};
typedef struct AspeedBoardState {
AspeedSoCState soc;
MemoryRegion ram;
} AspeedBoardState;
typedef struct AspeedBoardConfig {
const char *soc_name;
uint32_t hw_strap1;
const char *fmc_model;
const char *spi_model;
uint32_t num_cs;
} AspeedBoardConfig;
enum {
PALMETTO_BMC,
AST2500_EVB,
ROMULUS_BMC,
};
/* Palmetto hardware value: 0x120CE416 */
#define PALMETTO_BMC_HW_STRAP1 ( \
SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_256MB) | \
SCU_AST2400_HW_STRAP_DRAM_CONFIG(2 /* DDR3 with CL=6, CWL=5 */) | \
SCU_AST2400_HW_STRAP_ACPI_DIS | \
SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) | \
SCU_HW_STRAP_VGA_CLASS_CODE | \
SCU_HW_STRAP_LPC_RESET_PIN | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) | \
SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \
SCU_HW_STRAP_SPI_WIDTH | \
SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) | \
SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))
/* AST2500 evb hardware value: 0xF100C2E6 */
#define AST2500_EVB_HW_STRAP1 (( \
AST2500_HW_STRAP1_DEFAULTS | \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
SCU_HW_STRAP_MAC1_RGMII | \
SCU_HW_STRAP_MAC0_RGMII) & \
~SCU_HW_STRAP_2ND_BOOT_WDT)
/* Romulus hardware value: 0xF10AD206 */
#define ROMULUS_BMC_HW_STRAP1 ( \
AST2500_HW_STRAP1_DEFAULTS | \
SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE | \
SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE | \
SCU_AST2500_HW_STRAP_UART_DEBUG | \
SCU_AST2500_HW_STRAP_DDR4_ENABLE | \
SCU_AST2500_HW_STRAP_ACPI_ENABLE | \
SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
static const AspeedBoardConfig aspeed_boards[] = {
[PALMETTO_BMC] = {
.soc_name = "ast2400-a1",
.hw_strap1 = PALMETTO_BMC_HW_STRAP1,
.fmc_model = "n25q256a",
.spi_model = "mx25l25635e",
.num_cs = 1,
},
[AST2500_EVB] = {
.soc_name = "ast2500-a1",
.hw_strap1 = AST2500_EVB_HW_STRAP1,
.fmc_model = "n25q256a",
.spi_model = "mx25l25635e",
.num_cs = 1,
},
[ROMULUS_BMC] = {
.soc_name = "ast2500-a1",
.hw_strap1 = ROMULUS_BMC_HW_STRAP1,
.fmc_model = "n25q256a",
.spi_model = "mx66l1g45g",
.num_cs = 2,
},
};
#define FIRMWARE_ADDR 0x0
static void write_boot_rom(DriveInfo *dinfo, hwaddr addr, size_t rom_size,
Error **errp)
{
BlockBackend *blk = blk_by_legacy_dinfo(dinfo);
uint8_t *storage;
int64_t size;
/* The block backend size should have already been 'validated' by
* the creation of the m25p80 object.
*/
size = blk_getlength(blk);
if (size <= 0) {
error_setg(errp, "failed to get flash size");
return;
}
if (rom_size > size) {
rom_size = size;
}
storage = g_new0(uint8_t, rom_size);
if (blk_pread(blk, 0, storage, rom_size) < 0) {
error_setg(errp, "failed to read the initial flash content");
return;
}
rom_add_blob_fixed("aspeed.boot_rom", storage, rom_size, addr);
g_free(storage);
}
static void aspeed_board_init_flashes(AspeedSMCState *s, const char *flashtype,
Error **errp)
{
int i ;
for (i = 0; i < s->num_cs; ++i) {
AspeedSMCFlash *fl = &s->flashes[i];
DriveInfo *dinfo = drive_get_next(IF_MTD);
qemu_irq cs_line;
fl->flash = ssi_create_slave_no_init(s->spi, flashtype);
if (dinfo) {
qdev_prop_set_drive(fl->flash, "drive", blk_by_legacy_dinfo(dinfo),
errp);
}
qdev_init_nofail(fl->flash);
cs_line = qdev_get_gpio_in_named(fl->flash, SSI_GPIO_CS, 0);
sysbus_connect_irq(SYS_BUS_DEVICE(s), i + 1, cs_line);
}
}
static void aspeed_board_init(MachineState *machine,
const AspeedBoardConfig *cfg)
{
AspeedBoardState *bmc;
AspeedSoCClass *sc;
DriveInfo *drive0 = drive_get(IF_MTD, 0, 0);
bmc = g_new0(AspeedBoardState, 1);
object_initialize(&bmc->soc, (sizeof(bmc->soc)), cfg->soc_name);
object_property_add_child(OBJECT(machine), "soc", OBJECT(&bmc->soc),
&error_abort);
sc = ASPEED_SOC_GET_CLASS(&bmc->soc);
object_property_set_int(OBJECT(&bmc->soc), ram_size, "ram-size",
&error_abort);
object_property_set_int(OBJECT(&bmc->soc), cfg->hw_strap1, "hw-strap1",
&error_abort);
object_property_set_int(OBJECT(&bmc->soc), cfg->num_cs, "num-cs",
&error_abort);
object_property_set_bool(OBJECT(&bmc->soc), true, "realized",
&error_abort);
/*
* Allocate RAM after the memory controller has checked the size
* was valid. If not, a default value is used.
*/
ram_size = object_property_get_int(OBJECT(&bmc->soc), "ram-size",
&error_abort);
memory_region_allocate_system_memory(&bmc->ram, NULL, "ram", ram_size);
memory_region_add_subregion(get_system_memory(), sc->info->sdram_base,
&bmc->ram);
object_property_add_const_link(OBJECT(&bmc->soc), "ram", OBJECT(&bmc->ram),
&error_abort);
aspeed_board_init_flashes(&bmc->soc.fmc, cfg->fmc_model, &error_abort);
aspeed_board_init_flashes(&bmc->soc.spi[0], cfg->spi_model, &error_abort);
/* Install first FMC flash content as a boot rom. */
if (drive0) {
AspeedSMCFlash *fl = &bmc->soc.fmc.flashes[0];
MemoryRegion *boot_rom = g_new(MemoryRegion, 1);
/*
* create a ROM region using the default mapping window size of
* the flash module. The window size is 64MB for the AST2400
* SoC and 128MB for the AST2500 SoC, which is twice as big as
* needed by the flash modules of the Aspeed machines.
*/
memory_region_init_rom(boot_rom, OBJECT(bmc), "aspeed.boot_rom",
fl->size, &error_abort);
memory_region_add_subregion(get_system_memory(), FIRMWARE_ADDR,
boot_rom);
write_boot_rom(drive0, FIRMWARE_ADDR, fl->size, &error_abort);
}
aspeed_board_binfo.kernel_filename = machine->kernel_filename;
aspeed_board_binfo.initrd_filename = machine->initrd_filename;
aspeed_board_binfo.kernel_cmdline = machine->kernel_cmdline;
aspeed_board_binfo.ram_size = ram_size;
aspeed_board_binfo.loader_start = sc->info->sdram_base;
arm_load_kernel(ARM_CPU(first_cpu), &aspeed_board_binfo);
}
static void palmetto_bmc_init(MachineState *machine)
{
aspeed_board_init(machine, &aspeed_boards[PALMETTO_BMC]);
}
static void palmetto_bmc_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "OpenPOWER Palmetto BMC (ARM926EJ-S)";
mc->init = palmetto_bmc_init;
mc->max_cpus = 1;
mc->no_sdcard = 1;
mc->no_floppy = 1;
mc->no_cdrom = 1;
mc->no_parallel = 1;
}
static const TypeInfo palmetto_bmc_type = {
.name = MACHINE_TYPE_NAME("palmetto-bmc"),
.parent = TYPE_MACHINE,
.class_init = palmetto_bmc_class_init,
};
static void ast2500_evb_init(MachineState *machine)
{
aspeed_board_init(machine, &aspeed_boards[AST2500_EVB]);
}
static void ast2500_evb_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "Aspeed AST2500 EVB (ARM1176)";
mc->init = ast2500_evb_init;
mc->max_cpus = 1;
mc->no_sdcard = 1;
mc->no_floppy = 1;
mc->no_cdrom = 1;
mc->no_parallel = 1;
}
static const TypeInfo ast2500_evb_type = {
.name = MACHINE_TYPE_NAME("ast2500-evb"),
.parent = TYPE_MACHINE,
.class_init = ast2500_evb_class_init,
};
static void romulus_bmc_init(MachineState *machine)
{
aspeed_board_init(machine, &aspeed_boards[ROMULUS_BMC]);
}
static void romulus_bmc_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
mc->desc = "OpenPOWER Romulus BMC (ARM1176)";
mc->init = romulus_bmc_init;
mc->max_cpus = 1;
mc->no_sdcard = 1;
mc->no_floppy = 1;
mc->no_cdrom = 1;
mc->no_parallel = 1;
}
static const TypeInfo romulus_bmc_type = {
.name = MACHINE_TYPE_NAME("romulus-bmc"),
.parent = TYPE_MACHINE,
.class_init = romulus_bmc_class_init,
};
static void aspeed_machine_init(void)
{
type_register_static(&palmetto_bmc_type);
type_register_static(&ast2500_evb_type);
type_register_static(&romulus_bmc_type);
}
type_init(aspeed_machine_init)
Reference in a new issue View git blame Copy permalink