git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
714 lines
19 KiB
C
714 lines
19 KiB
C
/*
|
|
* SMSC 91C111 Ethernet interface emulation
|
|
*
|
|
* Copyright (c) 2005 CodeSourcery, LLC.
|
|
* Written by Paul Brook
|
|
*
|
|
* This code is licenced under the GPL
|
|
*/
|
|
|
|
#include "vl.h"
|
|
/* For crc32 */
|
|
#include <zlib.h>
|
|
|
|
/* Number of 2k memory pages available. */
|
|
#define NUM_PACKETS 4
|
|
|
|
typedef struct {
|
|
uint32_t base;
|
|
VLANClientState *vc;
|
|
uint16_t tcr;
|
|
uint16_t rcr;
|
|
uint16_t cr;
|
|
uint16_t ctr;
|
|
uint16_t gpr;
|
|
uint16_t ptr;
|
|
uint16_t ercv;
|
|
qemu_irq irq;
|
|
int bank;
|
|
int packet_num;
|
|
int tx_alloc;
|
|
/* Bitmask of allocated packets. */
|
|
int allocated;
|
|
int tx_fifo_len;
|
|
int tx_fifo[NUM_PACKETS];
|
|
int rx_fifo_len;
|
|
int rx_fifo[NUM_PACKETS];
|
|
int tx_fifo_done_len;
|
|
int tx_fifo_done[NUM_PACKETS];
|
|
/* Packet buffer memory. */
|
|
uint8_t data[NUM_PACKETS][2048];
|
|
uint8_t int_level;
|
|
uint8_t int_mask;
|
|
uint8_t macaddr[6];
|
|
} smc91c111_state;
|
|
|
|
#define RCR_SOFT_RST 0x8000
|
|
#define RCR_STRIP_CRC 0x0200
|
|
#define RCR_RXEN 0x0100
|
|
|
|
#define TCR_EPH_LOOP 0x2000
|
|
#define TCR_NOCRC 0x0100
|
|
#define TCR_PAD_EN 0x0080
|
|
#define TCR_FORCOL 0x0004
|
|
#define TCR_LOOP 0x0002
|
|
#define TCR_TXEN 0x0001
|
|
|
|
#define INT_MD 0x80
|
|
#define INT_ERCV 0x40
|
|
#define INT_EPH 0x20
|
|
#define INT_RX_OVRN 0x10
|
|
#define INT_ALLOC 0x08
|
|
#define INT_TX_EMPTY 0x04
|
|
#define INT_TX 0x02
|
|
#define INT_RCV 0x01
|
|
|
|
#define CTR_AUTO_RELEASE 0x0800
|
|
#define CTR_RELOAD 0x0002
|
|
#define CTR_STORE 0x0001
|
|
|
|
#define RS_ALGNERR 0x8000
|
|
#define RS_BRODCAST 0x4000
|
|
#define RS_BADCRC 0x2000
|
|
#define RS_ODDFRAME 0x1000
|
|
#define RS_TOOLONG 0x0800
|
|
#define RS_TOOSHORT 0x0400
|
|
#define RS_MULTICAST 0x0001
|
|
|
|
/* Update interrupt status. */
|
|
static void smc91c111_update(smc91c111_state *s)
|
|
{
|
|
int level;
|
|
|
|
if (s->tx_fifo_len == 0)
|
|
s->int_level |= INT_TX_EMPTY;
|
|
if (s->tx_fifo_done_len != 0)
|
|
s->int_level |= INT_TX;
|
|
level = (s->int_level & s->int_mask) != 0;
|
|
qemu_set_irq(s->irq, level);
|
|
}
|
|
|
|
/* Try to allocate a packet. Returns 0x80 on failure. */
|
|
static int smc91c111_allocate_packet(smc91c111_state *s)
|
|
{
|
|
int i;
|
|
if (s->allocated == (1 << NUM_PACKETS) - 1) {
|
|
return 0x80;
|
|
}
|
|
|
|
for (i = 0; i < NUM_PACKETS; i++) {
|
|
if ((s->allocated & (1 << i)) == 0)
|
|
break;
|
|
}
|
|
s->allocated |= 1 << i;
|
|
return i;
|
|
}
|
|
|
|
|
|
/* Process a pending TX allocate. */
|
|
static void smc91c111_tx_alloc(smc91c111_state *s)
|
|
{
|
|
s->tx_alloc = smc91c111_allocate_packet(s);
|
|
if (s->tx_alloc == 0x80)
|
|
return;
|
|
s->int_level |= INT_ALLOC;
|
|
smc91c111_update(s);
|
|
}
|
|
|
|
/* Remove and item from the RX FIFO. */
|
|
static void smc91c111_pop_rx_fifo(smc91c111_state *s)
|
|
{
|
|
int i;
|
|
|
|
s->rx_fifo_len--;
|
|
if (s->rx_fifo_len) {
|
|
for (i = 0; i < s->rx_fifo_len; i++)
|
|
s->rx_fifo[i] = s->rx_fifo[i + 1];
|
|
s->int_level |= INT_RCV;
|
|
} else {
|
|
s->int_level &= ~INT_RCV;
|
|
}
|
|
smc91c111_update(s);
|
|
}
|
|
|
|
/* Remove an item from the TX completion FIFO. */
|
|
static void smc91c111_pop_tx_fifo_done(smc91c111_state *s)
|
|
{
|
|
int i;
|
|
|
|
if (s->tx_fifo_done_len == 0)
|
|
return;
|
|
s->tx_fifo_done_len--;
|
|
for (i = 0; i < s->tx_fifo_done_len; i++)
|
|
s->tx_fifo_done[i] = s->tx_fifo_done[i + 1];
|
|
}
|
|
|
|
/* Release the memory allocated to a packet. */
|
|
static void smc91c111_release_packet(smc91c111_state *s, int packet)
|
|
{
|
|
s->allocated &= ~(1 << packet);
|
|
if (s->tx_alloc == 0x80)
|
|
smc91c111_tx_alloc(s);
|
|
}
|
|
|
|
/* Flush the TX FIFO. */
|
|
static void smc91c111_do_tx(smc91c111_state *s)
|
|
{
|
|
int i;
|
|
int len;
|
|
int control;
|
|
int add_crc;
|
|
int packetnum;
|
|
uint8_t *p;
|
|
|
|
if ((s->tcr & TCR_TXEN) == 0)
|
|
return;
|
|
if (s->tx_fifo_len == 0)
|
|
return;
|
|
for (i = 0; i < s->tx_fifo_len; i++) {
|
|
packetnum = s->tx_fifo[i];
|
|
p = &s->data[packetnum][0];
|
|
/* Set status word. */
|
|
*(p++) = 0x01;
|
|
*(p++) = 0x40;
|
|
len = *(p++);
|
|
len |= ((int)*(p++)) << 8;
|
|
len -= 6;
|
|
control = p[len + 1];
|
|
if (control & 0x20)
|
|
len++;
|
|
/* ??? This overwrites the data following the buffer.
|
|
Don't know what real hardware does. */
|
|
if (len < 64 && (s->tcr & TCR_PAD_EN)) {
|
|
memset(p + len, 0, 64 - len);
|
|
len = 64;
|
|
}
|
|
#if 0
|
|
/* The card is supposed to append the CRC to the frame. However
|
|
none of the other network traffic has the CRC appended.
|
|
Suspect this is low level ethernet detail we don't need to worry
|
|
about. */
|
|
add_crc = (control & 0x10) || (s->tcr & TCR_NOCRC) == 0;
|
|
if (add_crc) {
|
|
uint32_t crc;
|
|
|
|
crc = crc32(~0, p, len);
|
|
memcpy(p + len, &crc, 4);
|
|
len += 4;
|
|
}
|
|
#else
|
|
add_crc = 0;
|
|
#endif
|
|
if (s->ctr & CTR_AUTO_RELEASE)
|
|
/* Race? */
|
|
smc91c111_release_packet(s, packetnum);
|
|
else if (s->tx_fifo_done_len < NUM_PACKETS)
|
|
s->tx_fifo_done[s->tx_fifo_done_len++] = packetnum;
|
|
qemu_send_packet(s->vc, p, len);
|
|
}
|
|
s->tx_fifo_len = 0;
|
|
smc91c111_update(s);
|
|
}
|
|
|
|
/* Add a packet to the TX FIFO. */
|
|
static void smc91c111_queue_tx(smc91c111_state *s, int packet)
|
|
{
|
|
if (s->tx_fifo_len == NUM_PACKETS)
|
|
return;
|
|
s->tx_fifo[s->tx_fifo_len++] = packet;
|
|
smc91c111_do_tx(s);
|
|
}
|
|
|
|
static void smc91c111_reset(smc91c111_state *s)
|
|
{
|
|
s->bank = 0;
|
|
s->tx_fifo_len = 0;
|
|
s->tx_fifo_done_len = 0;
|
|
s->rx_fifo_len = 0;
|
|
s->allocated = 0;
|
|
s->packet_num = 0;
|
|
s->tx_alloc = 0;
|
|
s->tcr = 0;
|
|
s->rcr = 0;
|
|
s->cr = 0xa0b1;
|
|
s->ctr = 0x1210;
|
|
s->ptr = 0;
|
|
s->ercv = 0x1f;
|
|
s->int_level = INT_TX_EMPTY;
|
|
s->int_mask = 0;
|
|
smc91c111_update(s);
|
|
}
|
|
|
|
#define SET_LOW(name, val) s->name = (s->name & 0xff00) | val
|
|
#define SET_HIGH(name, val) s->name = (s->name & 0xff) | (val << 8)
|
|
|
|
static void smc91c111_writeb(void *opaque, target_phys_addr_t offset,
|
|
uint32_t value)
|
|
{
|
|
smc91c111_state *s = (smc91c111_state *)opaque;
|
|
|
|
offset -= s->base;
|
|
if (offset == 14) {
|
|
s->bank = value;
|
|
return;
|
|
}
|
|
if (offset == 15)
|
|
return;
|
|
switch (s->bank) {
|
|
case 0:
|
|
switch (offset) {
|
|
case 0: /* TCR */
|
|
SET_LOW(tcr, value);
|
|
return;
|
|
case 1:
|
|
SET_HIGH(tcr, value);
|
|
return;
|
|
case 4: /* RCR */
|
|
SET_LOW(rcr, value);
|
|
return;
|
|
case 5:
|
|
SET_HIGH(rcr, value);
|
|
if (s->rcr & RCR_SOFT_RST)
|
|
smc91c111_reset(s);
|
|
return;
|
|
case 10: case 11: /* RPCR */
|
|
/* Ignored */
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
switch (offset) {
|
|
case 0: /* CONFIG */
|
|
SET_LOW(cr, value);
|
|
return;
|
|
case 1:
|
|
SET_HIGH(cr,value);
|
|
return;
|
|
case 2: case 3: /* BASE */
|
|
case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
|
|
/* Not implemented. */
|
|
return;
|
|
case 10: /* Genral Purpose */
|
|
SET_LOW(gpr, value);
|
|
return;
|
|
case 11:
|
|
SET_HIGH(gpr, value);
|
|
return;
|
|
case 12: /* Control */
|
|
if (value & 1)
|
|
fprintf(stderr, "smc91c111:EEPROM store not implemented\n");
|
|
if (value & 2)
|
|
fprintf(stderr, "smc91c111:EEPROM reload not implemented\n");
|
|
value &= ~3;
|
|
SET_LOW(ctr, value);
|
|
return;
|
|
case 13:
|
|
SET_HIGH(ctr, value);
|
|
return;
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
switch (offset) {
|
|
case 0: /* MMU Command */
|
|
switch (value >> 5) {
|
|
case 0: /* no-op */
|
|
break;
|
|
case 1: /* Allocate for TX. */
|
|
s->tx_alloc = 0x80;
|
|
s->int_level &= ~INT_ALLOC;
|
|
smc91c111_update(s);
|
|
smc91c111_tx_alloc(s);
|
|
break;
|
|
case 2: /* Reset MMU. */
|
|
s->allocated = 0;
|
|
s->tx_fifo_len = 0;
|
|
s->tx_fifo_done_len = 0;
|
|
s->rx_fifo_len = 0;
|
|
s->tx_alloc = 0;
|
|
break;
|
|
case 3: /* Remove from RX FIFO. */
|
|
smc91c111_pop_rx_fifo(s);
|
|
break;
|
|
case 4: /* Remove from RX FIFO and release. */
|
|
if (s->rx_fifo_len > 0) {
|
|
smc91c111_release_packet(s, s->rx_fifo[0]);
|
|
}
|
|
smc91c111_pop_rx_fifo(s);
|
|
break;
|
|
case 5: /* Release. */
|
|
smc91c111_release_packet(s, s->packet_num);
|
|
break;
|
|
case 6: /* Add to TX FIFO. */
|
|
smc91c111_queue_tx(s, s->packet_num);
|
|
break;
|
|
case 7: /* Reset TX FIFO. */
|
|
s->tx_fifo_len = 0;
|
|
s->tx_fifo_done_len = 0;
|
|
break;
|
|
}
|
|
return;
|
|
case 1:
|
|
/* Ignore. */
|
|
return;
|
|
case 2: /* Packet Number Register */
|
|
s->packet_num = value;
|
|
return;
|
|
case 3: case 4: case 5:
|
|
/* Should be readonly, but linux writes to them anyway. Ignore. */
|
|
return;
|
|
case 6: /* Pointer */
|
|
SET_LOW(ptr, value);
|
|
return;
|
|
case 7:
|
|
SET_HIGH(ptr, value);
|
|
return;
|
|
case 8: case 9: case 10: case 11: /* Data */
|
|
{
|
|
int p;
|
|
int n;
|
|
|
|
if (s->ptr & 0x8000)
|
|
n = s->rx_fifo[0];
|
|
else
|
|
n = s->packet_num;
|
|
p = s->ptr & 0x07ff;
|
|
if (s->ptr & 0x4000) {
|
|
s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x7ff);
|
|
} else {
|
|
p += (offset & 3);
|
|
}
|
|
s->data[n][p] = value;
|
|
}
|
|
return;
|
|
case 12: /* Interrupt ACK. */
|
|
s->int_level &= ~(value & 0xd6);
|
|
if (value & INT_TX)
|
|
smc91c111_pop_tx_fifo_done(s);
|
|
smc91c111_update(s);
|
|
return;
|
|
case 13: /* Interrupt mask. */
|
|
s->int_mask = value;
|
|
smc91c111_update(s);
|
|
return;
|
|
}
|
|
break;;
|
|
|
|
case 3:
|
|
switch (offset) {
|
|
case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
|
|
/* Multicast table. */
|
|
/* Not implemented. */
|
|
return;
|
|
case 8: case 9: /* Management Interface. */
|
|
/* Not implemented. */
|
|
return;
|
|
case 12: /* Early receive. */
|
|
s->ercv = value & 0x1f;
|
|
case 13:
|
|
/* Ignore. */
|
|
return;
|
|
}
|
|
break;
|
|
}
|
|
cpu_abort (cpu_single_env, "smc91c111_write: Bad reg %d:%x\n",
|
|
s->bank, offset);
|
|
}
|
|
|
|
static uint32_t smc91c111_readb(void *opaque, target_phys_addr_t offset)
|
|
{
|
|
smc91c111_state *s = (smc91c111_state *)opaque;
|
|
|
|
offset -= s->base;
|
|
if (offset == 14) {
|
|
return s->bank;
|
|
}
|
|
if (offset == 15)
|
|
return 0x33;
|
|
switch (s->bank) {
|
|
case 0:
|
|
switch (offset) {
|
|
case 0: /* TCR */
|
|
return s->tcr & 0xff;
|
|
case 1:
|
|
return s->tcr >> 8;
|
|
case 2: /* EPH Status */
|
|
return 0;
|
|
case 3:
|
|
return 0x40;
|
|
case 4: /* RCR */
|
|
return s->rcr & 0xff;
|
|
case 5:
|
|
return s->rcr >> 8;
|
|
case 6: /* Counter */
|
|
case 7:
|
|
/* Not implemented. */
|
|
return 0;
|
|
case 8: /* Memory size. */
|
|
return NUM_PACKETS;
|
|
case 9: /* Free memory available. */
|
|
{
|
|
int i;
|
|
int n;
|
|
n = 0;
|
|
for (i = 0; i < NUM_PACKETS; i++) {
|
|
if (s->allocated & (1 << i))
|
|
n++;
|
|
}
|
|
return n;
|
|
}
|
|
case 10: case 11: /* RPCR */
|
|
/* Not implemented. */
|
|
return 0;
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
switch (offset) {
|
|
case 0: /* CONFIG */
|
|
return s->cr & 0xff;
|
|
case 1:
|
|
return s->cr >> 8;
|
|
case 2: case 3: /* BASE */
|
|
/* Not implemented. */
|
|
return 0;
|
|
case 4: case 5: case 6: case 7: case 8: case 9: /* IA */
|
|
return s->macaddr[offset - 4];
|
|
case 10: /* General Purpose */
|
|
return s->gpr & 0xff;
|
|
case 11:
|
|
return s->gpr >> 8;
|
|
case 12: /* Control */
|
|
return s->ctr & 0xff;
|
|
case 13:
|
|
return s->ctr >> 8;
|
|
}
|
|
break;
|
|
|
|
case 2:
|
|
switch (offset) {
|
|
case 0: case 1: /* MMUCR Busy bit. */
|
|
return 0;
|
|
case 2: /* Packet Number. */
|
|
return s->packet_num;
|
|
case 3: /* Allocation Result. */
|
|
return s->tx_alloc;
|
|
case 4: /* TX FIFO */
|
|
if (s->tx_fifo_done_len == 0)
|
|
return 0x80;
|
|
else
|
|
return s->tx_fifo_done[0];
|
|
case 5: /* RX FIFO */
|
|
if (s->rx_fifo_len == 0)
|
|
return 0x80;
|
|
else
|
|
return s->rx_fifo[0];
|
|
case 6: /* Pointer */
|
|
return s->ptr & 0xff;
|
|
case 7:
|
|
return (s->ptr >> 8) & 0xf7;
|
|
case 8: case 9: case 10: case 11: /* Data */
|
|
{
|
|
int p;
|
|
int n;
|
|
|
|
if (s->ptr & 0x8000)
|
|
n = s->rx_fifo[0];
|
|
else
|
|
n = s->packet_num;
|
|
p = s->ptr & 0x07ff;
|
|
if (s->ptr & 0x4000) {
|
|
s->ptr = (s->ptr & 0xf800) | ((s->ptr + 1) & 0x07ff);
|
|
} else {
|
|
p += (offset & 3);
|
|
}
|
|
return s->data[n][p];
|
|
}
|
|
case 12: /* Interrupt status. */
|
|
return s->int_level;
|
|
case 13: /* Interrupt mask. */
|
|
return s->int_mask;
|
|
}
|
|
break;
|
|
|
|
case 3:
|
|
switch (offset) {
|
|
case 0: case 1: case 2: case 3: case 4: case 5: case 6: case 7:
|
|
/* Multicast table. */
|
|
/* Not implemented. */
|
|
return 0;
|
|
case 8: /* Management Interface. */
|
|
/* Not implemented. */
|
|
return 0x30;
|
|
case 9:
|
|
return 0x33;
|
|
case 10: /* Revision. */
|
|
return 0x91;
|
|
case 11:
|
|
return 0x33;
|
|
case 12:
|
|
return s->ercv;
|
|
case 13:
|
|
return 0;
|
|
}
|
|
break;
|
|
}
|
|
cpu_abort (cpu_single_env, "smc91c111_read: Bad reg %d:%x\n",
|
|
s->bank, offset);
|
|
return 0;
|
|
}
|
|
|
|
static void smc91c111_writew(void *opaque, target_phys_addr_t offset,
|
|
uint32_t value)
|
|
{
|
|
smc91c111_writeb(opaque, offset, value & 0xff);
|
|
smc91c111_writeb(opaque, offset + 1, value >> 8);
|
|
}
|
|
|
|
static void smc91c111_writel(void *opaque, target_phys_addr_t offset,
|
|
uint32_t value)
|
|
{
|
|
smc91c111_state *s = (smc91c111_state *)opaque;
|
|
/* 32-bit writes to offset 0xc only actually write to the bank select
|
|
register (offset 0xe) */
|
|
if (offset != s->base + 0xc)
|
|
smc91c111_writew(opaque, offset, value & 0xffff);
|
|
smc91c111_writew(opaque, offset + 2, value >> 16);
|
|
}
|
|
|
|
static uint32_t smc91c111_readw(void *opaque, target_phys_addr_t offset)
|
|
{
|
|
uint32_t val;
|
|
val = smc91c111_readb(opaque, offset);
|
|
val |= smc91c111_readb(opaque, offset + 1) << 8;
|
|
return val;
|
|
}
|
|
|
|
static uint32_t smc91c111_readl(void *opaque, target_phys_addr_t offset)
|
|
{
|
|
uint32_t val;
|
|
val = smc91c111_readw(opaque, offset);
|
|
val |= smc91c111_readw(opaque, offset + 2) << 16;
|
|
return val;
|
|
}
|
|
|
|
static int smc91c111_can_receive(void *opaque)
|
|
{
|
|
smc91c111_state *s = (smc91c111_state *)opaque;
|
|
|
|
if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
|
|
return 1;
|
|
if (s->allocated == (1 << NUM_PACKETS) - 1)
|
|
return 0;
|
|
return 1;
|
|
}
|
|
|
|
static void smc91c111_receive(void *opaque, const uint8_t *buf, int size)
|
|
{
|
|
smc91c111_state *s = (smc91c111_state *)opaque;
|
|
int status;
|
|
int packetsize;
|
|
uint32_t crc;
|
|
int packetnum;
|
|
uint8_t *p;
|
|
|
|
if ((s->rcr & RCR_RXEN) == 0 || (s->rcr & RCR_SOFT_RST))
|
|
return;
|
|
/* Short packets are padded with zeros. Receiving a packet
|
|
< 64 bytes long is considered an error condition. */
|
|
if (size < 64)
|
|
packetsize = 64;
|
|
else
|
|
packetsize = (size & ~1);
|
|
packetsize += 6;
|
|
crc = (s->rcr & RCR_STRIP_CRC) == 0;
|
|
if (crc)
|
|
packetsize += 4;
|
|
/* TODO: Flag overrun and receive errors. */
|
|
if (packetsize > 2048)
|
|
return;
|
|
packetnum = smc91c111_allocate_packet(s);
|
|
if (packetnum == 0x80)
|
|
return;
|
|
s->rx_fifo[s->rx_fifo_len++] = packetnum;
|
|
|
|
p = &s->data[packetnum][0];
|
|
/* ??? Multicast packets? */
|
|
status = 0;
|
|
if (size > 1518)
|
|
status |= RS_TOOLONG;
|
|
if (size & 1)
|
|
status |= RS_ODDFRAME;
|
|
*(p++) = status & 0xff;
|
|
*(p++) = status >> 8;
|
|
*(p++) = packetsize & 0xff;
|
|
*(p++) = packetsize >> 8;
|
|
memcpy(p, buf, size & ~1);
|
|
p += (size & ~1);
|
|
/* Pad short packets. */
|
|
if (size < 64) {
|
|
int pad;
|
|
|
|
if (size & 1)
|
|
*(p++) = buf[size - 1];
|
|
pad = 64 - size;
|
|
memset(p, 0, pad);
|
|
p += pad;
|
|
size = 64;
|
|
}
|
|
/* It's not clear if the CRC should go before or after the last byte in
|
|
odd sized packets. Linux disables the CRC, so that's no help.
|
|
The pictures in the documentation show the CRC aligned on a 16-bit
|
|
boundary before the last odd byte, so that's what we do. */
|
|
if (crc) {
|
|
crc = crc32(~0, buf, size);
|
|
*(p++) = crc & 0xff; crc >>= 8;
|
|
*(p++) = crc & 0xff; crc >>= 8;
|
|
*(p++) = crc & 0xff; crc >>= 8;
|
|
*(p++) = crc & 0xff; crc >>= 8;
|
|
}
|
|
if (size & 1) {
|
|
*(p++) = buf[size - 1];
|
|
*(p++) = 0x60;
|
|
} else {
|
|
*(p++) = 0;
|
|
*(p++) = 0x40;
|
|
}
|
|
/* TODO: Raise early RX interrupt? */
|
|
s->int_level |= INT_RCV;
|
|
smc91c111_update(s);
|
|
}
|
|
|
|
static CPUReadMemoryFunc *smc91c111_readfn[] = {
|
|
smc91c111_readb,
|
|
smc91c111_readw,
|
|
smc91c111_readl
|
|
};
|
|
|
|
static CPUWriteMemoryFunc *smc91c111_writefn[] = {
|
|
smc91c111_writeb,
|
|
smc91c111_writew,
|
|
smc91c111_writel
|
|
};
|
|
|
|
void smc91c111_init(NICInfo *nd, uint32_t base, qemu_irq irq)
|
|
{
|
|
smc91c111_state *s;
|
|
int iomemtype;
|
|
|
|
s = (smc91c111_state *)qemu_mallocz(sizeof(smc91c111_state));
|
|
iomemtype = cpu_register_io_memory(0, smc91c111_readfn,
|
|
smc91c111_writefn, s);
|
|
cpu_register_physical_memory(base, 16, iomemtype);
|
|
s->base = base;
|
|
s->irq = irq;
|
|
memcpy(s->macaddr, nd->macaddr, 6);
|
|
|
|
smc91c111_reset(s);
|
|
|
|
s->vc = qemu_new_vlan_client(nd->vlan, smc91c111_receive,
|
|
smc91c111_can_receive, s);
|
|
/* ??? Save/restore. */
|
|
}
|