62c6ae04cf
Based on the implementation from Hector Martin <hector@marcansoft.com>
Hectors's implementation completely sidestepped the qemu usb system and
used libusb directly for usb device pass through. So I've ripped out
the libusb bits (or left them in disabled, as reference for further
coding) and hooked up the qemu subsystem instead. That work is not
complete yet though, partly due to limitations of the qemu usb
subsystem. Nevertheless I think it is better to continue development
in-tree, especially as the qemu usb bits need a bunch of improvements
too for decent usb 3.0 support.
Current state:
- usb-storage emulation should work ok.
- Devices which need constant polling (HID emulation like usb-tablet)
are known to not work.
- ISO xfers are not implemented yet.
- superspeed ports are not implemented yet.
- usb pass-through is completely untested so far.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
431 lines
15 KiB
Makefile
431 lines
15 KiB
Makefile
#######################################################################
|
|
# QObject
|
|
qobject-obj-y = qint.o qstring.o qdict.o qlist.o qfloat.o qbool.o
|
|
qobject-obj-y += qjson.o json-lexer.o json-streamer.o json-parser.o
|
|
qobject-obj-y += qerror.o error.o qemu-error.o
|
|
|
|
#######################################################################
|
|
# oslib-obj-y is code depending on the OS (win32 vs posix)
|
|
oslib-obj-y = osdep.o
|
|
oslib-obj-$(CONFIG_WIN32) += oslib-win32.o qemu-thread-win32.o
|
|
oslib-obj-$(CONFIG_POSIX) += oslib-posix.o qemu-thread-posix.o
|
|
|
|
#######################################################################
|
|
# coroutines
|
|
coroutine-obj-y = qemu-coroutine.o qemu-coroutine-lock.o qemu-coroutine-io.o
|
|
ifeq ($(CONFIG_UCONTEXT_COROUTINE),y)
|
|
coroutine-obj-$(CONFIG_POSIX) += coroutine-ucontext.o
|
|
else
|
|
coroutine-obj-$(CONFIG_POSIX) += coroutine-gthread.o
|
|
endif
|
|
coroutine-obj-$(CONFIG_WIN32) += coroutine-win32.o
|
|
|
|
#######################################################################
|
|
# block-obj-y is code used by both qemu system emulation and qemu-img
|
|
|
|
block-obj-y = cutils.o cache-utils.o qemu-option.o module.o async.o
|
|
block-obj-y += nbd.o block.o aio.o aes.o qemu-config.o qemu-progress.o qemu-sockets.o
|
|
block-obj-y += $(coroutine-obj-y) $(qobject-obj-y) $(version-obj-y)
|
|
block-obj-$(CONFIG_POSIX) += posix-aio-compat.o
|
|
block-obj-$(CONFIG_LINUX_AIO) += linux-aio.o
|
|
|
|
block-nested-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o dmg.o bochs.o vpc.o vvfat.o
|
|
block-nested-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o qcow2-cache.o
|
|
block-nested-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
|
|
block-nested-y += qed-check.o
|
|
block-nested-y += parallels.o nbd.o blkdebug.o sheepdog.o blkverify.o
|
|
block-nested-$(CONFIG_WIN32) += raw-win32.o
|
|
block-nested-$(CONFIG_POSIX) += raw-posix.o
|
|
block-nested-$(CONFIG_LIBISCSI) += iscsi.o
|
|
block-nested-$(CONFIG_CURL) += curl.o
|
|
block-nested-$(CONFIG_RBD) += rbd.o
|
|
|
|
block-obj-y += $(addprefix block/, $(block-nested-y))
|
|
|
|
net-obj-y = net.o
|
|
net-nested-y = queue.o checksum.o util.o
|
|
net-nested-y += socket.o
|
|
net-nested-y += dump.o
|
|
net-nested-$(CONFIG_POSIX) += tap.o
|
|
net-nested-$(CONFIG_LINUX) += tap-linux.o
|
|
net-nested-$(CONFIG_WIN32) += tap-win32.o
|
|
net-nested-$(CONFIG_BSD) += tap-bsd.o
|
|
net-nested-$(CONFIG_SOLARIS) += tap-solaris.o
|
|
net-nested-$(CONFIG_AIX) += tap-aix.o
|
|
net-nested-$(CONFIG_HAIKU) += tap-haiku.o
|
|
net-nested-$(CONFIG_SLIRP) += slirp.o
|
|
net-nested-$(CONFIG_VDE) += vde.o
|
|
net-obj-y += $(addprefix net/, $(net-nested-y))
|
|
|
|
ifeq ($(CONFIG_VIRTIO)$(CONFIG_VIRTFS)$(CONFIG_PCI),yyy)
|
|
# Lots of the fsdev/9pcode is pulled in by vl.c via qemu_fsdev_add.
|
|
# only pull in the actual virtio-9p device if we also enabled virtio.
|
|
CONFIG_REALLY_VIRTFS=y
|
|
fsdev-nested-y = qemu-fsdev.o virtio-9p-marshal.o
|
|
else
|
|
fsdev-nested-y = qemu-fsdev-dummy.o
|
|
endif
|
|
fsdev-obj-$(CONFIG_VIRTFS) += $(addprefix fsdev/, $(fsdev-nested-y))
|
|
|
|
######################################################################
|
|
# Target independent part of system emulation. The long term path is to
|
|
# suppress *all* target specific code in case of system emulation, i.e. a
|
|
# single QEMU executable should support all CPUs and machines.
|
|
|
|
common-obj-y = $(block-obj-y) blockdev.o
|
|
common-obj-y += $(net-obj-y)
|
|
common-obj-y += $(qobject-obj-y)
|
|
common-obj-$(CONFIG_LINUX) += $(fsdev-obj-$(CONFIG_LINUX))
|
|
common-obj-y += readline.o console.o cursor.o
|
|
common-obj-y += $(oslib-obj-y)
|
|
common-obj-$(CONFIG_WIN32) += os-win32.o
|
|
common-obj-$(CONFIG_POSIX) += os-posix.o
|
|
|
|
common-obj-y += tcg-runtime.o host-utils.o main-loop.o
|
|
common-obj-y += irq.o input.o
|
|
common-obj-$(CONFIG_PTIMER) += ptimer.o
|
|
common-obj-$(CONFIG_MAX7310) += max7310.o
|
|
common-obj-$(CONFIG_WM8750) += wm8750.o
|
|
common-obj-$(CONFIG_TWL92230) += twl92230.o
|
|
common-obj-$(CONFIG_TSC2005) += tsc2005.o
|
|
common-obj-$(CONFIG_LM832X) += lm832x.o
|
|
common-obj-$(CONFIG_TMP105) += tmp105.o
|
|
common-obj-$(CONFIG_STELLARIS_INPUT) += stellaris_input.o
|
|
common-obj-$(CONFIG_SSD0303) += ssd0303.o
|
|
common-obj-$(CONFIG_SSD0323) += ssd0323.o
|
|
common-obj-$(CONFIG_ADS7846) += ads7846.o
|
|
common-obj-$(CONFIG_MAX111X) += max111x.o
|
|
common-obj-$(CONFIG_DS1338) += ds1338.o
|
|
common-obj-y += i2c.o smbus.o smbus_eeprom.o
|
|
common-obj-y += eeprom93xx.o
|
|
common-obj-y += scsi-disk.o cdrom.o
|
|
common-obj-y += scsi-generic.o scsi-bus.o
|
|
common-obj-y += hid.o
|
|
common-obj-y += usb.o usb-hub.o usb-$(HOST_USB).o usb-hid.o usb-msd.o usb-wacom.o
|
|
common-obj-y += usb-serial.o usb-net.o usb-bus.o usb-desc.o usb-audio.o
|
|
common-obj-$(CONFIG_SSI) += ssi.o
|
|
common-obj-$(CONFIG_SSI_SD) += ssi-sd.o
|
|
common-obj-$(CONFIG_SD) += sd.o
|
|
common-obj-y += bt.o bt-host.o bt-vhci.o bt-l2cap.o bt-sdp.o bt-hci.o bt-hid.o usb-bt.o
|
|
common-obj-y += bt-hci-csr.o
|
|
common-obj-y += buffered_file.o migration.o migration-tcp.o
|
|
common-obj-y += qemu-char.o #aio.o
|
|
common-obj-y += msmouse.o ps2.o
|
|
common-obj-y += qdev.o qdev-properties.o
|
|
common-obj-y += block-migration.o iohandler.o
|
|
common-obj-y += pflib.o
|
|
common-obj-y += bitmap.o bitops.o
|
|
|
|
common-obj-$(CONFIG_BRLAPI) += baum.o
|
|
common-obj-$(CONFIG_POSIX) += migration-exec.o migration-unix.o migration-fd.o
|
|
common-obj-$(CONFIG_WIN32) += version.o
|
|
|
|
common-obj-$(CONFIG_SPICE) += ui/spice-core.o ui/spice-input.o ui/spice-display.o spice-qemu-char.o
|
|
|
|
audio-obj-y = audio.o noaudio.o wavaudio.o mixeng.o
|
|
audio-obj-$(CONFIG_SDL) += sdlaudio.o
|
|
audio-obj-$(CONFIG_OSS) += ossaudio.o
|
|
audio-obj-$(CONFIG_SPICE) += spiceaudio.o
|
|
audio-obj-$(CONFIG_COREAUDIO) += coreaudio.o
|
|
audio-obj-$(CONFIG_ALSA) += alsaaudio.o
|
|
audio-obj-$(CONFIG_DSOUND) += dsoundaudio.o
|
|
audio-obj-$(CONFIG_FMOD) += fmodaudio.o
|
|
audio-obj-$(CONFIG_ESD) += esdaudio.o
|
|
audio-obj-$(CONFIG_PA) += paaudio.o
|
|
audio-obj-$(CONFIG_WINWAVE) += winwaveaudio.o
|
|
audio-obj-$(CONFIG_AUDIO_PT_INT) += audio_pt_int.o
|
|
audio-obj-$(CONFIG_AUDIO_WIN_INT) += audio_win_int.o
|
|
audio-obj-y += wavcapture.o
|
|
common-obj-y += $(addprefix audio/, $(audio-obj-y))
|
|
|
|
ui-obj-y += keymaps.o
|
|
ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
|
|
ui-obj-$(CONFIG_COCOA) += cocoa.o
|
|
ui-obj-$(CONFIG_CURSES) += curses.o
|
|
vnc-obj-y += vnc.o d3des.o
|
|
vnc-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
|
|
vnc-obj-y += vnc-enc-tight.o vnc-palette.o
|
|
vnc-obj-y += vnc-enc-zrle.o
|
|
vnc-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
|
|
vnc-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
|
|
ifdef CONFIG_VNC_THREAD
|
|
vnc-obj-y += vnc-jobs-async.o
|
|
else
|
|
vnc-obj-y += vnc-jobs-sync.o
|
|
endif
|
|
common-obj-y += $(addprefix ui/, $(ui-obj-y))
|
|
common-obj-$(CONFIG_VNC) += $(addprefix ui/, $(vnc-obj-y))
|
|
|
|
common-obj-y += iov.o acl.o
|
|
common-obj-$(CONFIG_POSIX) += compatfd.o
|
|
common-obj-y += notify.o event_notifier.o
|
|
common-obj-y += qemu-timer.o qemu-timer-common.o
|
|
|
|
slirp-obj-y = cksum.o if.o ip_icmp.o ip_input.o ip_output.o
|
|
slirp-obj-y += slirp.o mbuf.o misc.o sbuf.o socket.o tcp_input.o tcp_output.o
|
|
slirp-obj-y += tcp_subr.o tcp_timer.o udp.o bootp.o tftp.o arp_table.o
|
|
common-obj-$(CONFIG_SLIRP) += $(addprefix slirp/, $(slirp-obj-y))
|
|
|
|
# xen backend driver support
|
|
common-obj-$(CONFIG_XEN_BACKEND) += xen_backend.o xen_devconfig.o
|
|
common-obj-$(CONFIG_XEN_BACKEND) += xen_console.o xenfb.o xen_disk.o xen_nic.o
|
|
|
|
######################################################################
|
|
# libuser
|
|
|
|
user-obj-y =
|
|
user-obj-y += envlist.o path.o
|
|
user-obj-y += tcg-runtime.o host-utils.o
|
|
user-obj-y += cutils.o cache-utils.o
|
|
user-obj-y += $(trace-obj-y)
|
|
|
|
######################################################################
|
|
# libhw
|
|
|
|
hw-obj-y =
|
|
hw-obj-y += vl.o loader.o
|
|
hw-obj-$(CONFIG_VIRTIO) += virtio-console.o
|
|
hw-obj-y += usb-libhw.o
|
|
hw-obj-$(CONFIG_VIRTIO_PCI) += virtio-pci.o
|
|
hw-obj-y += fw_cfg.o
|
|
hw-obj-$(CONFIG_PCI) += pci.o pci_bridge.o
|
|
hw-obj-$(CONFIG_PCI) += msix.o msi.o
|
|
hw-obj-$(CONFIG_PCI) += pci_host.o pcie_host.o
|
|
hw-obj-$(CONFIG_PCI) += ioh3420.o xio3130_upstream.o xio3130_downstream.o
|
|
hw-obj-y += watchdog.o
|
|
hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
|
|
hw-obj-$(CONFIG_ECC) += ecc.o
|
|
hw-obj-$(CONFIG_NAND) += nand.o
|
|
hw-obj-$(CONFIG_PFLASH_CFI01) += pflash_cfi01.o
|
|
hw-obj-$(CONFIG_PFLASH_CFI02) += pflash_cfi02.o
|
|
|
|
hw-obj-$(CONFIG_M48T59) += m48t59.o
|
|
hw-obj-$(CONFIG_ESCC) += escc.o
|
|
hw-obj-$(CONFIG_EMPTY_SLOT) += empty_slot.o
|
|
|
|
hw-obj-$(CONFIG_SERIAL) += serial.o
|
|
hw-obj-$(CONFIG_PARALLEL) += parallel.o
|
|
hw-obj-$(CONFIG_I8254) += i8254.o
|
|
hw-obj-$(CONFIG_PCSPK) += pcspk.o
|
|
hw-obj-$(CONFIG_PCKBD) += pckbd.o
|
|
hw-obj-$(CONFIG_USB_UHCI) += usb-uhci.o
|
|
hw-obj-$(CONFIG_USB_OHCI) += usb-ohci.o
|
|
hw-obj-$(CONFIG_USB_EHCI) += usb-ehci.o
|
|
hw-obj-$(CONFIG_USB_XHCI) += usb-xhci.o
|
|
hw-obj-$(CONFIG_FDC) += fdc.o
|
|
hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
|
|
hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
|
|
hw-obj-$(CONFIG_DMA) += dma.o
|
|
hw-obj-$(CONFIG_HPET) += hpet.o
|
|
hw-obj-$(CONFIG_APPLESMC) += applesmc.o
|
|
hw-obj-$(CONFIG_SMARTCARD) += usb-ccid.o ccid-card-passthru.o
|
|
hw-obj-$(CONFIG_SMARTCARD_NSS) += ccid-card-emulated.o
|
|
hw-obj-$(CONFIG_USB_REDIR) += usb-redir.o
|
|
hw-obj-$(CONFIG_I8259) += i8259.o
|
|
|
|
# PPC devices
|
|
hw-obj-$(CONFIG_PREP_PCI) += prep_pci.o
|
|
# Mac shared devices
|
|
hw-obj-$(CONFIG_MACIO) += macio.o
|
|
hw-obj-$(CONFIG_CUDA) += cuda.o
|
|
hw-obj-$(CONFIG_ADB) += adb.o
|
|
hw-obj-$(CONFIG_MAC_NVRAM) += mac_nvram.o
|
|
hw-obj-$(CONFIG_MAC_DBDMA) += mac_dbdma.o
|
|
# OldWorld PowerMac
|
|
hw-obj-$(CONFIG_HEATHROW_PIC) += heathrow_pic.o
|
|
hw-obj-$(CONFIG_GRACKLE_PCI) += grackle_pci.o
|
|
# NewWorld PowerMac
|
|
hw-obj-$(CONFIG_UNIN_PCI) += unin_pci.o
|
|
hw-obj-$(CONFIG_DEC_PCI) += dec_pci.o
|
|
# PowerPC E500 boards
|
|
hw-obj-$(CONFIG_PPCE500_PCI) += ppce500_pci.o
|
|
|
|
# MIPS devices
|
|
hw-obj-$(CONFIG_PIIX4) += piix4.o
|
|
hw-obj-$(CONFIG_G364FB) += g364fb.o
|
|
|
|
# PCI watchdog devices
|
|
hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
|
|
|
|
hw-obj-$(CONFIG_PCI) += pcie.o pcie_aer.o pcie_port.o
|
|
|
|
# PCI network cards
|
|
hw-obj-$(CONFIG_NE2000_PCI) += ne2000.o
|
|
hw-obj-$(CONFIG_EEPRO100_PCI) += eepro100.o
|
|
hw-obj-$(CONFIG_PCNET_PCI) += pcnet-pci.o
|
|
hw-obj-$(CONFIG_PCNET_COMMON) += pcnet.o
|
|
hw-obj-$(CONFIG_E1000_PCI) += e1000.o
|
|
hw-obj-$(CONFIG_RTL8139_PCI) += rtl8139.o
|
|
|
|
hw-obj-$(CONFIG_SMC91C111) += smc91c111.o
|
|
hw-obj-$(CONFIG_LAN9118) += lan9118.o
|
|
hw-obj-$(CONFIG_NE2000_ISA) += ne2000-isa.o
|
|
hw-obj-$(CONFIG_OPENCORES_ETH) += opencores_eth.o
|
|
|
|
# IDE
|
|
hw-obj-$(CONFIG_IDE_CORE) += ide/core.o ide/atapi.o
|
|
hw-obj-$(CONFIG_IDE_QDEV) += ide/qdev.o
|
|
hw-obj-$(CONFIG_IDE_PCI) += ide/pci.o
|
|
hw-obj-$(CONFIG_IDE_ISA) += ide/isa.o
|
|
hw-obj-$(CONFIG_IDE_PIIX) += ide/piix.o
|
|
hw-obj-$(CONFIG_IDE_CMD646) += ide/cmd646.o
|
|
hw-obj-$(CONFIG_IDE_MACIO) += ide/macio.o
|
|
hw-obj-$(CONFIG_IDE_VIA) += ide/via.o
|
|
hw-obj-$(CONFIG_AHCI) += ide/ahci.o
|
|
hw-obj-$(CONFIG_AHCI) += ide/ich.o
|
|
|
|
# SCSI layer
|
|
hw-obj-$(CONFIG_LSI_SCSI_PCI) += lsi53c895a.o
|
|
hw-obj-$(CONFIG_ESP) += esp.o
|
|
|
|
hw-obj-y += dma-helpers.o sysbus.o isa-bus.o
|
|
hw-obj-y += qdev-addr.o container.o
|
|
|
|
# VGA
|
|
hw-obj-$(CONFIG_VGA_PCI) += vga-pci.o
|
|
hw-obj-$(CONFIG_VGA_ISA) += vga-isa.o
|
|
hw-obj-$(CONFIG_VGA_ISA_MM) += vga-isa-mm.o
|
|
hw-obj-$(CONFIG_VMWARE_VGA) += vmware_vga.o
|
|
hw-obj-$(CONFIG_VMMOUSE) += vmmouse.o
|
|
|
|
hw-obj-$(CONFIG_RC4030) += rc4030.o
|
|
hw-obj-$(CONFIG_DP8393X) += dp8393x.o
|
|
hw-obj-$(CONFIG_DS1225Y) += ds1225y.o
|
|
hw-obj-$(CONFIG_MIPSNET) += mipsnet.o
|
|
|
|
# Sound
|
|
sound-obj-y =
|
|
sound-obj-$(CONFIG_SB16) += sb16.o
|
|
sound-obj-$(CONFIG_ES1370) += es1370.o
|
|
sound-obj-$(CONFIG_AC97) += ac97.o
|
|
sound-obj-$(CONFIG_ADLIB) += fmopl.o adlib.o
|
|
sound-obj-$(CONFIG_GUS) += gus.o gusemu_hal.o gusemu_mixer.o
|
|
sound-obj-$(CONFIG_CS4231A) += cs4231a.o
|
|
sound-obj-$(CONFIG_HDA) += intel-hda.o hda-audio.o
|
|
|
|
adlib.o fmopl.o: QEMU_CFLAGS += -DBUILD_Y8950=0
|
|
hw-obj-$(CONFIG_SOUND) += $(sound-obj-y)
|
|
|
|
9pfs-nested-$(CONFIG_VIRTFS) = virtio-9p.o
|
|
9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-local.o virtio-9p-xattr.o
|
|
9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-xattr-user.o virtio-9p-posix-acl.o
|
|
9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-coth.o cofs.o codir.o cofile.o
|
|
9pfs-nested-$(CONFIG_VIRTFS) += coxattr.o virtio-9p-synth.o
|
|
9pfs-nested-$(CONFIG_OPEN_BY_HANDLE) += virtio-9p-handle.o
|
|
9pfs-nested-$(CONFIG_VIRTFS) += virtio-9p-proxy.o
|
|
|
|
hw-obj-$(CONFIG_REALLY_VIRTFS) += $(addprefix 9pfs/, $(9pfs-nested-y))
|
|
$(addprefix 9pfs/, $(9pfs-nested-y)): QEMU_CFLAGS+=$(GLIB_CFLAGS)
|
|
|
|
|
|
######################################################################
|
|
# libdis
|
|
# NOTE: the disassembler code is only needed for debugging
|
|
|
|
libdis-y =
|
|
libdis-$(CONFIG_ALPHA_DIS) += alpha-dis.o
|
|
libdis-$(CONFIG_ARM_DIS) += arm-dis.o
|
|
libdis-$(CONFIG_CRIS_DIS) += cris-dis.o
|
|
libdis-$(CONFIG_HPPA_DIS) += hppa-dis.o
|
|
libdis-$(CONFIG_I386_DIS) += i386-dis.o
|
|
libdis-$(CONFIG_IA64_DIS) += ia64-dis.o
|
|
libdis-$(CONFIG_M68K_DIS) += m68k-dis.o
|
|
libdis-$(CONFIG_MICROBLAZE_DIS) += microblaze-dis.o
|
|
libdis-$(CONFIG_MIPS_DIS) += mips-dis.o
|
|
libdis-$(CONFIG_PPC_DIS) += ppc-dis.o
|
|
libdis-$(CONFIG_S390_DIS) += s390-dis.o
|
|
libdis-$(CONFIG_SH4_DIS) += sh4-dis.o
|
|
libdis-$(CONFIG_SPARC_DIS) += sparc-dis.o
|
|
|
|
######################################################################
|
|
# trace
|
|
|
|
ifeq ($(TRACE_BACKEND),dtrace)
|
|
trace.h: trace.h-timestamp trace-dtrace.h
|
|
else
|
|
trace.h: trace.h-timestamp
|
|
endif
|
|
trace.h-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -h < $< > $@," GEN trace.h")
|
|
@cmp -s $@ trace.h || cp $@ trace.h
|
|
|
|
trace.c: trace.c-timestamp
|
|
trace.c-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -c < $< > $@," GEN trace.c")
|
|
@cmp -s $@ trace.c || cp $@ trace.c
|
|
|
|
trace.o: trace.c $(GENERATED_HEADERS)
|
|
|
|
trace-dtrace.h: trace-dtrace.dtrace
|
|
$(call quiet-command,dtrace -o $@ -h -s $<, " GEN trace-dtrace.h")
|
|
|
|
# Normal practice is to name DTrace probe file with a '.d' extension
|
|
# but that gets picked up by QEMU's Makefile as an external dependency
|
|
# rule file. So we use '.dtrace' instead
|
|
trace-dtrace.dtrace: trace-dtrace.dtrace-timestamp
|
|
trace-dtrace.dtrace-timestamp: $(SRC_PATH)/trace-events $(BUILD_DIR)/config-host.mak
|
|
$(call quiet-command,sh $(SRC_PATH)/scripts/tracetool --$(TRACE_BACKEND) -d < $< > $@," GEN trace-dtrace.dtrace")
|
|
@cmp -s $@ trace-dtrace.dtrace || cp $@ trace-dtrace.dtrace
|
|
|
|
trace-dtrace.o: trace-dtrace.dtrace $(GENERATED_HEADERS)
|
|
$(call quiet-command,dtrace -o $@ -G -s $<, " GEN trace-dtrace.o")
|
|
|
|
ifeq ($(LIBTOOL),)
|
|
trace-dtrace.lo: trace-dtrace.dtrace
|
|
@echo "missing libtool. please install and rerun configure."; exit 1
|
|
else
|
|
trace-dtrace.lo: trace-dtrace.dtrace
|
|
$(call quiet-command,$(LIBTOOL) --mode=compile --tag=CC dtrace -o $@ -G -s $<, " lt GEN trace-dtrace.o")
|
|
endif
|
|
|
|
trace/simple.o: trace/simple.c $(GENERATED_HEADERS)
|
|
|
|
trace-obj-$(CONFIG_TRACE_DTRACE) += trace-dtrace.o
|
|
ifneq ($(TRACE_BACKEND),dtrace)
|
|
trace-obj-y = trace.o
|
|
endif
|
|
|
|
trace-nested-$(CONFIG_TRACE_DEFAULT) += default.o
|
|
|
|
trace-nested-$(CONFIG_TRACE_SIMPLE) += simple.o
|
|
trace-obj-$(CONFIG_TRACE_SIMPLE) += qemu-timer-common.o
|
|
|
|
trace-nested-$(CONFIG_TRACE_STDERR) += stderr.o
|
|
|
|
trace-nested-y += control.o
|
|
|
|
trace-obj-y += $(addprefix trace/, $(trace-nested-y))
|
|
|
|
$(trace-obj-y): $(GENERATED_HEADERS)
|
|
|
|
######################################################################
|
|
# smartcard
|
|
|
|
libcacard-y = cac.o event.o vcard.o vreader.o vcard_emul_nss.o vcard_emul_type.o card_7816.o
|
|
|
|
######################################################################
|
|
# qapi
|
|
|
|
qapi-nested-y = qapi-visit-core.o qmp-input-visitor.o qmp-output-visitor.o qapi-dealloc-visitor.o
|
|
qapi-nested-y += qmp-registry.o qmp-dispatch.o
|
|
qapi-obj-y = $(addprefix qapi/, $(qapi-nested-y))
|
|
|
|
common-obj-y += qmp-marshal.o qapi-visit.o qapi-types.o $(qapi-obj-y)
|
|
common-obj-y += qmp.o hmp.o
|
|
|
|
######################################################################
|
|
# guest agent
|
|
|
|
qga-nested-y = guest-agent-commands.o guest-agent-command-state.o
|
|
qga-obj-y = $(addprefix qga/, $(qga-nested-y))
|
|
qga-obj-y += qemu-ga.o qemu-sockets.o module.o qemu-option.o
|
|
qga-obj-$(CONFIG_WIN32) += oslib-win32.o
|
|
qga-obj-$(CONFIG_POSIX) += oslib-posix.o
|
|
|
|
vl.o: QEMU_CFLAGS+=$(GPROF_CFLAGS)
|
|
|
|
vl.o: QEMU_CFLAGS+=$(SDL_CFLAGS)
|
|
|
|
QEMU_CFLAGS+=$(GLIB_CFLAGS)
|
|
|