qemu-patch-raspberry4/hw/gpio/max7310.c
Corey Minyard 2ac4c5f4d2 i2c: have I2C receive operation return uint8_t
It is never supposed to fail and cannot return an error, so just
have it return the proper type.  Have it return 0xff on nothing
available, since that's what would happen on a real bus.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-27 21:06:08 -06:00

220 lines
5 KiB
C

/*
* MAX7310 8-port GPIO expansion chip.
*
* Copyright (c) 2006 Openedhand Ltd.
* Written by Andrzej Zaborowski <balrog@zabor.org>
*
* This file is licensed under GNU GPL.
*/
#include "qemu/osdep.h"
#include "hw/i2c/i2c.h"
#define TYPE_MAX7310 "max7310"
#define MAX7310(obj) OBJECT_CHECK(MAX7310State, (obj), TYPE_MAX7310)
typedef struct MAX7310State {
I2CSlave parent_obj;
int i2c_command_byte;
int len;
uint8_t level;
uint8_t direction;
uint8_t polarity;
uint8_t status;
uint8_t command;
qemu_irq handler[8];
qemu_irq *gpio_in;
} MAX7310State;
static void max7310_reset(DeviceState *dev)
{
MAX7310State *s = MAX7310(dev);
s->level &= s->direction;
s->direction = 0xff;
s->polarity = 0xf0;
s->status = 0x01;
s->command = 0x00;
}
static uint8_t max7310_rx(I2CSlave *i2c)
{
MAX7310State *s = MAX7310(i2c);
switch (s->command) {
case 0x00: /* Input port */
return s->level ^ s->polarity;
break;
case 0x01: /* Output port */
return s->level & ~s->direction;
break;
case 0x02: /* Polarity inversion */
return s->polarity;
case 0x03: /* Configuration */
return s->direction;
case 0x04: /* Timeout */
return s->status;
break;
case 0xff: /* Reserved */
return 0xff;
default:
#ifdef VERBOSE
printf("%s: unknown register %02x\n", __func__, s->command);
#endif
break;
}
return 0xff;
}
static int max7310_tx(I2CSlave *i2c, uint8_t data)
{
MAX7310State *s = MAX7310(i2c);
uint8_t diff;
int line;
if (s->len ++ > 1) {
#ifdef VERBOSE
printf("%s: message too long (%i bytes)\n", __func__, s->len);
#endif
return 1;
}
if (s->i2c_command_byte) {
s->command = data;
s->i2c_command_byte = 0;
return 0;
}
switch (s->command) {
case 0x01: /* Output port */
for (diff = (data ^ s->level) & ~s->direction; diff;
diff &= ~(1 << line)) {
line = ctz32(diff);
if (s->handler[line])
qemu_set_irq(s->handler[line], (data >> line) & 1);
}
s->level = (s->level & s->direction) | (data & ~s->direction);
break;
case 0x02: /* Polarity inversion */
s->polarity = data;
break;
case 0x03: /* Configuration */
s->level &= ~(s->direction ^ data);
s->direction = data;
break;
case 0x04: /* Timeout */
s->status = data;
break;
case 0x00: /* Input port - ignore writes */
break;
default:
#ifdef VERBOSE
printf("%s: unknown register %02x\n", __func__, s->command);
#endif
return 1;
}
return 0;
}
static int max7310_event(I2CSlave *i2c, enum i2c_event event)
{
MAX7310State *s = MAX7310(i2c);
s->len = 0;
switch (event) {
case I2C_START_SEND:
s->i2c_command_byte = 1;
break;
case I2C_FINISH:
#ifdef VERBOSE
if (s->len == 1)
printf("%s: message too short (%i bytes)\n", __func__, s->len);
#endif
break;
default:
break;
}
return 0;
}
static const VMStateDescription vmstate_max7310 = {
.name = "max7310",
.version_id = 0,
.minimum_version_id = 0,
.fields = (VMStateField[]) {
VMSTATE_INT32(i2c_command_byte, MAX7310State),
VMSTATE_INT32(len, MAX7310State),
VMSTATE_UINT8(level, MAX7310State),
VMSTATE_UINT8(direction, MAX7310State),
VMSTATE_UINT8(polarity, MAX7310State),
VMSTATE_UINT8(status, MAX7310State),
VMSTATE_UINT8(command, MAX7310State),
VMSTATE_I2C_SLAVE(parent_obj, MAX7310State),
VMSTATE_END_OF_LIST()
}
};
static void max7310_gpio_set(void *opaque, int line, int level)
{
MAX7310State *s = (MAX7310State *) opaque;
if (line >= ARRAY_SIZE(s->handler) || line < 0)
hw_error("bad GPIO line");
if (level)
s->level |= s->direction & (1 << line);
else
s->level &= ~(s->direction & (1 << line));
}
/* MAX7310 is SMBus-compatible (can be used with only SMBus protocols),
* but also accepts sequences that are not SMBus so return an I2C device. */
static void max7310_realize(DeviceState *dev, Error **errp)
{
I2CSlave *i2c = I2C_SLAVE(dev);
MAX7310State *s = MAX7310(dev);
qdev_init_gpio_in(&i2c->qdev, max7310_gpio_set, 8);
qdev_init_gpio_out(&i2c->qdev, s->handler, 8);
}
static void max7310_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
dc->realize = max7310_realize;
k->event = max7310_event;
k->recv = max7310_rx;
k->send = max7310_tx;
dc->reset = max7310_reset;
dc->vmsd = &vmstate_max7310;
}
static const TypeInfo max7310_info = {
.name = TYPE_MAX7310,
.parent = TYPE_I2C_SLAVE,
.instance_size = sizeof(MAX7310State),
.class_init = max7310_class_init,
};
static void max7310_register_types(void)
{
type_register_static(&max7310_info);
}
type_init(max7310_register_types)