051 has both compat=1.1 and compat=0.10 tests (once it uses lazy_refcounts, once it tests that setting them does not work). For the compat=0.10 tests, it already explicitly creates a suitable image. So let's just ignore the user-specified compat level for the lazy_refcounts test and explicitly create a compat=1.1 image there, too. Signed-off-by: Max Reitz <mreitz@redhat.com> Message-id: 20171123020832.8165-12-mreitz@redhat.com Signed-off-by: Max Reitz <mreitz@redhat.com>
436 lines
19 KiB
Plaintext
436 lines
19 KiB
Plaintext
QA output created by 051
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base
|
|
|
|
=== Unknown option ===
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=on,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=1234,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,unknown_opt=foo,if=none,id=drive0: Block format 'qcow2' does not support the option 'unknown_opt'
|
|
|
|
|
|
=== Unknown protocol option ===
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=: Block protocol 'file' doesn't support the option 'unknown_opt'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=on: Block protocol 'file' doesn't support the option 'unknown_opt'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=1234: Block protocol 'file' doesn't support the option 'unknown_opt'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,file.unknown_opt=foo: Block protocol 'file' doesn't support the option 'unknown_opt'
|
|
|
|
|
|
=== Invalid format ===
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=foo
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=foo: Unknown driver 'foo'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,driver=foo
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=foo: Unknown driver 'foo'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,format=qcow2: Cannot specify both 'driver' and 'format'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=qcow2,format=qcow2: Cannot specify both 'driver' and 'format'
|
|
|
|
|
|
=== Device without drive ===
|
|
|
|
Testing: -device VIRTIO_SCSI -device scsi-hd
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) QEMU_PROG: -device scsi-hd: drive property not set
|
|
|
|
|
|
=== Overriding backing file ===
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,driver=qcow2,backing.file.filename=TEST_DIR/t.qcow2.orig,if=none,id=drive0 -nodefaults
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) info block
|
|
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
|
|
Removable device: not locked, tray closed
|
|
Cache mode: writeback
|
|
Backing file: TEST_DIR/t.qcow2.orig (chain depth: 1)
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,driver=raw,backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=file,file.backing.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,file.backing.driver=qcow2,file.backing.file.filename=TEST_DIR/t.qcow2.orig: Driver doesn't support backing files
|
|
|
|
|
|
=== Enable and disable lazy refcounting on the command line, plus some invalid values ===
|
|
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=: Parameter 'lazy-refcounts' expects 'on' or 'off'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=42: Parameter 'lazy-refcounts' expects 'on' or 'off'
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=foo: Parameter 'lazy-refcounts' expects 'on' or 'off'
|
|
|
|
|
|
=== With version 2 images enabling lazy refcounts must fail ===
|
|
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=on: Lazy refcounts require a qcow2 image with at least qemu 1.1 compatibility level
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,format=qcow2,lazy-refcounts=off
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
|
|
=== No medium ===
|
|
|
|
Testing: -drive if=virtio
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) QEMU_PROG: -drive if=virtio: Device needs media, but drive is empty
|
|
|
|
|
|
=== Read-only ===
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,if=virtio,readonly=on
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
|
|
=== Cache modes ===
|
|
|
|
Testing: -drive driver=null-co,cache=none
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive driver=null-co,cache=directsync
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive driver=null-co,cache=writeback
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive driver=null-co,cache=writethrough
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive driver=null-co,cache=unsafe
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive driver=null-co,cache=invalid_value
|
|
QEMU_PROG: -drive driver=null-co,cache=invalid_value: invalid cache option
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,cache=writeback,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) info block
|
|
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
|
|
Removable device: not locked, tray closed
|
|
Cache mode: writeback
|
|
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
|
|
(qemu) info block file
|
|
|
|
file: TEST_DIR/t.qcow2 (file)
|
|
Cache mode: writeback
|
|
(qemu) info block backing
|
|
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
|
|
Cache mode: writeback, ignore flushes
|
|
(qemu) info block backing-file
|
|
|
|
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
|
|
Cache mode: writeback, ignore flushes
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,cache=writethrough,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) info block
|
|
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
|
|
Removable device: not locked, tray closed
|
|
Cache mode: writethrough
|
|
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
|
|
(qemu) info block file
|
|
|
|
file: TEST_DIR/t.qcow2 (file)
|
|
Cache mode: writeback
|
|
(qemu) info block backing
|
|
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
|
|
Cache mode: writeback, ignore flushes
|
|
(qemu) info block backing-file
|
|
|
|
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
|
|
Cache mode: writeback, ignore flushes
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,cache=unsafe,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) info block
|
|
drive0 (NODE_NAME): TEST_DIR/t.qcow2 (qcow2)
|
|
Removable device: not locked, tray closed
|
|
Cache mode: writeback, ignore flushes
|
|
Backing file: TEST_DIR/t.qcow2.base (chain depth: 1)
|
|
(qemu) info block file
|
|
|
|
file: TEST_DIR/t.qcow2 (file)
|
|
Cache mode: writeback, ignore flushes
|
|
(qemu) info block backing
|
|
backing: TEST_DIR/t.qcow2.base (qcow2, read-only)
|
|
Cache mode: writeback, ignore flushes
|
|
(qemu) info block backing-file
|
|
|
|
backing-file: TEST_DIR/t.qcow2.base (file, read-only)
|
|
Cache mode: writeback, ignore flushes
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0 -nodefaults
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,cache=invalid_value,backing.file.filename=TEST_DIR/t.qcow2.base,backing.cache.no-flush=on,backing.node-name=backing,backing.file.node-name=backing-file,file.node-name=file,if=none,id=drive0: invalid cache option
|
|
|
|
|
|
=== Specifying the protocol layer ===
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,file.driver=file
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
|
|
=== Leaving out required options ===
|
|
|
|
Testing: -drive driver=file
|
|
QEMU_PROG: -drive driver=file: The 'file' block driver requires a file name
|
|
|
|
Testing: -drive driver=file,filename=
|
|
QEMU_PROG: -drive driver=file,filename=: The 'file' block driver requires a file name
|
|
|
|
Testing: -drive driver=nbd
|
|
QEMU_PROG: -drive driver=nbd: NBD server address missing
|
|
|
|
Testing: -drive driver=raw
|
|
QEMU_PROG: -drive driver=raw: A block device must be specified for "file"
|
|
|
|
Testing: -drive file.driver=file
|
|
QEMU_PROG: -drive file.driver=file: The 'file' block driver requires a file name
|
|
|
|
Testing: -drive file.driver=nbd
|
|
QEMU_PROG: -drive file.driver=nbd: NBD server address missing
|
|
|
|
Testing: -drive file.driver=raw
|
|
QEMU_PROG: -drive file.driver=raw: A block device must be specified for "file"
|
|
|
|
Testing: -drive foo=bar
|
|
QEMU_PROG: -drive foo=bar: Must specify either driver or file
|
|
|
|
|
|
=== Specifying both an option and its legacy alias ===
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=1234,throttling.iops-total=5678: 'throttling.iops-total' and its alias 'iops' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd=1234,throttling.iops-read=5678: 'throttling.iops-read' and its alias 'iops_rd' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr=1234,throttling.iops-write=5678: 'throttling.iops-write' and its alias 'iops_wr' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1234,throttling.bps-total=5678: 'throttling.bps-total' and its alias 'bps' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=1234,throttling.bps-read=5678: 'throttling.bps-read' and its alias 'bps_rd' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr=1234,throttling.bps-write=5678: 'throttling.bps-write' and its alias 'bps_wr' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_max=1234,throttling.iops-total-max=5678: 'throttling.iops-total-max' and its alias 'iops_max' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_rd_max=1234,throttling.iops-read-max=5678: 'throttling.iops-read-max' and its alias 'iops_rd_max' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_wr_max=1234,throttling.iops-write-max=5678: 'throttling.iops-write-max' and its alias 'iops_wr_max' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_max=1234,throttling.bps-total-max=5678: 'throttling.bps-total-max' and its alias 'bps_max' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=1234,throttling.bps-read-max=5678: 'throttling.bps-read-max' and its alias 'bps_rd_max' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_wr_max=1234,throttling.bps-write-max=5678: 'throttling.bps-write-max' and its alias 'bps_wr_max' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops_size=1234,throttling.iops-size=5678: 'throttling.iops-size' and its alias 'iops_size' can't be used at the same time
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,readonly=on,read-only=off: 'read-only' and its alias 'readonly' can't be used at the same time
|
|
|
|
|
|
=== Catching negative/large throttling values ===
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,iops=-1
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,iops=-1: bps/iops/max values must be within [0, 1000000000000000]
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps=-2
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=-2: bps/iops/max values must be within [0, 1000000000000000]
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd=-3
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd=-3: bps/iops/max values must be within [0, 1000000000000000]
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps_rd_max=-3: bps/iops/max values must be within [0, 1000000000000000]
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.iops-total=-4: bps/iops/max values must be within [0, 1000000000000000]
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,throttling.bps-total=-5: bps/iops/max values must be within [0, 1000000000000000]
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps=0
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps=1
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000000
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=1000000000000001: bps/iops/max values must be within [0, 1000000000000000]
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999
|
|
QEMU_PROG: -drive file=TEST_DIR/t.qcow2,bps=9999999999999999: bps/iops/max values must be within [0, 1000000000000000]
|
|
|
|
|
|
=== Parsing protocol from file name ===
|
|
|
|
Testing: -hda foo:bar
|
|
QEMU_PROG: -hda foo:bar: Unknown protocol 'foo'
|
|
|
|
Testing: -drive file=foo:bar
|
|
QEMU_PROG: -drive file=foo:bar: Unknown protocol 'foo'
|
|
|
|
Testing: -drive file.filename=foo:bar
|
|
QEMU_PROG: -drive file.filename=foo:bar: Could not open 'foo:bar': No such file or directory
|
|
|
|
Testing: -hda file:TEST_DIR/t.qcow2
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=file:TEST_DIR/t.qcow2
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) quit
|
|
|
|
Testing: -drive file.filename=file:TEST_DIR/t.qcow2
|
|
QEMU_PROG: -drive file.filename=file:TEST_DIR/t.qcow2: Could not open 'file:TEST_DIR/t.qcow2': No such file or directory
|
|
|
|
|
|
=== Snapshot mode ===
|
|
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,snapshot=on,if=none,id=drive0
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
Testing: -drive file.filename=TEST_DIR/t.qcow2,driver=qcow2,if=none,id=drive0 -snapshot
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=file:TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=file:TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,if=none,id=drive0 -snapshot
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
read 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=off,if=none,id=drive0
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x22 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) quit
|
|
|
|
read 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
Testing: -drive file=TEST_DIR/t.qcow2,snapshot=on,if=none,id=drive0
|
|
QEMU X.Y.Z monitor - type 'help' for more information
|
|
(qemu) qemu-io drive0 "write -P 0x33 0 4k"
|
|
wrote 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
(qemu) commit drive0
|
|
(qemu) quit
|
|
|
|
read 4096/4096 bytes at offset 0
|
|
4 KiB, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec)
|
|
*** done
|