The QXL_IO_LOG command allows the guest to send log messages to the host via a buffer in the QXLRam struct. QEMU prints these to the console if the qxl 'guestdebug' option is set to non-zero. It will also feed them to the trace subsystem if any backends are built-in. In both cases the log_buf data will get treated as being as a nul terminated string, by the printf '%s' format specifier and / or other code reading the buffer. QEMU does nothing to guarantee that the log_buf really is nul terminated, so there is potential for out of bounds array access. This would affect any QEMU which has the log, syslog or ftrace trace backends built into QEMU. It can only be triggered if the 'qxl_io_log' trace event is enabled, however, so they are not vulnerable without specific administrative action to enable this. It would also affect QEMU if the 'guestdebug' parameter is set to a non-zero value, which again is not the default and requires explicit admin opt-in. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-id: 20190123120016.4538-2-berrange@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
140 lines
8.8 KiB
Plaintext
140 lines
8.8 KiB
Plaintext
# See docs/devel/tracing.txt for syntax documentation.
|
|
|
|
# hw/display/jazz_led.c
|
|
jazz_led_read(uint64_t addr, uint8_t val) "read addr=0x%"PRIx64": 0x%x"
|
|
jazz_led_write(uint64_t addr, uint8_t new) "write addr=0x%"PRIx64": 0x%x"
|
|
|
|
# hw/display/xenfb.c
|
|
xenfb_mouse_event(void *opaque, int dx, int dy, int dz, int button_state, int abs_pointer_wanted) "%p x %d y %d z %d bs 0x%x abs %d"
|
|
xenfb_key_event(void *opaque, int scancode, int button_state) "%p scancode %d bs 0x%x"
|
|
xenfb_input_connected(void *xendev, int abs_pointer_wanted) "%p abs %d"
|
|
|
|
# hw/display/g364fb.c
|
|
g364fb_read(uint64_t addr, uint32_t val) "read addr=0x%"PRIx64": 0x%x"
|
|
g364fb_write(uint64_t addr, uint32_t new) "write addr=0x%"PRIx64": 0x%x"
|
|
|
|
# hw/display/milkymist-tmu2.c
|
|
milkymist_tmu2_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
milkymist_tmu2_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
milkymist_tmu2_start(void) "Start TMU"
|
|
milkymist_tmu2_pulse_irq(void) "Pulse IRQ"
|
|
|
|
# hw/display/milkymist-vgafb.c
|
|
milkymist_vgafb_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
milkymist_vgafb_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x"
|
|
|
|
# hw/display/vmware_vga.c
|
|
vmware_value_read(uint32_t index, uint32_t value) "index %d, value 0x%x"
|
|
vmware_value_write(uint32_t index, uint32_t value) "index %d, value 0x%x"
|
|
vmware_palette_read(uint32_t index, uint32_t value) "index %d, value 0x%x"
|
|
vmware_palette_write(uint32_t index, uint32_t value) "index %d, value 0x%x"
|
|
vmware_scratch_read(uint32_t index, uint32_t value) "index %d, value 0x%x"
|
|
vmware_scratch_write(uint32_t index, uint32_t value) "index %d, value 0x%x"
|
|
vmware_setmode(uint32_t w, uint32_t h, uint32_t bpp) "%dx%d @ %d bpp"
|
|
|
|
# hw/display/virtio-gpu.c
|
|
virtio_gpu_features(bool virgl) "virgl %d"
|
|
virtio_gpu_cmd_get_display_info(void) ""
|
|
virtio_gpu_cmd_set_scanout(uint32_t id, uint32_t res, uint32_t w, uint32_t h, uint32_t x, uint32_t y) "id %d, res 0x%x, w %d, h %d, x %d, y %d"
|
|
virtio_gpu_cmd_res_create_2d(uint32_t res, uint32_t fmt, uint32_t w, uint32_t h) "res 0x%x, fmt 0x%x, w %d, h %d"
|
|
virtio_gpu_cmd_res_create_3d(uint32_t res, uint32_t fmt, uint32_t w, uint32_t h, uint32_t d) "res 0x%x, fmt 0x%x, w %d, h %d, d %d"
|
|
virtio_gpu_cmd_res_unref(uint32_t res) "res 0x%x"
|
|
virtio_gpu_cmd_res_back_attach(uint32_t res) "res 0x%x"
|
|
virtio_gpu_cmd_res_back_detach(uint32_t res) "res 0x%x"
|
|
virtio_gpu_cmd_res_xfer_toh_2d(uint32_t res) "res 0x%x"
|
|
virtio_gpu_cmd_res_xfer_toh_3d(uint32_t res) "res 0x%x"
|
|
virtio_gpu_cmd_res_xfer_fromh_3d(uint32_t res) "res 0x%x"
|
|
virtio_gpu_cmd_res_flush(uint32_t res, uint32_t w, uint32_t h, uint32_t x, uint32_t y) "res 0x%x, w %d, h %d, x %d, y %d"
|
|
virtio_gpu_cmd_ctx_create(uint32_t ctx, const char *name) "ctx 0x%x, name %s"
|
|
virtio_gpu_cmd_ctx_destroy(uint32_t ctx) "ctx 0x%x"
|
|
virtio_gpu_cmd_ctx_res_attach(uint32_t ctx, uint32_t res) "ctx 0x%x, res 0x%x"
|
|
virtio_gpu_cmd_ctx_res_detach(uint32_t ctx, uint32_t res) "ctx 0x%x, res 0x%x"
|
|
virtio_gpu_cmd_ctx_submit(uint32_t ctx, uint32_t size) "ctx 0x%x, size %d"
|
|
virtio_gpu_update_cursor(uint32_t scanout, uint32_t x, uint32_t y, const char *type, uint32_t res) "scanout %d, x %d, y %d, %s, res 0x%x"
|
|
virtio_gpu_fence_ctrl(uint64_t fence, uint32_t type) "fence 0x%" PRIx64 ", type 0x%x"
|
|
virtio_gpu_fence_resp(uint64_t fence) "fence 0x%" PRIx64
|
|
|
|
# hw/display/qxl.c
|
|
disable qxl_interface_set_mm_time(int qid, uint32_t mm_time) "%d %d"
|
|
disable qxl_io_write_vga(int qid, const char *mode, uint32_t addr, uint32_t val) "%d %s addr=%u val=%u"
|
|
qxl_create_guest_primary(int qid, uint32_t width, uint32_t height, uint64_t mem, uint32_t format, uint32_t position) "%d %ux%u mem=0x%" PRIx64 " %u,%u"
|
|
qxl_create_guest_primary_rest(int qid, int32_t stride, uint32_t type, uint32_t flags) "%d %d,%d,%d"
|
|
qxl_destroy_primary(int qid) "%d"
|
|
qxl_enter_vga_mode(int qid) "%d"
|
|
qxl_exit_vga_mode(int qid) "%d"
|
|
qxl_hard_reset(int qid, int64_t loadvm) "%d loadvm=%"PRId64
|
|
qxl_interface_async_complete_io(int qid, uint32_t current_async, void *cookie) "%d current=%d cookie=%p"
|
|
qxl_interface_attach_worker(int qid) "%d"
|
|
qxl_interface_get_init_info(int qid) "%d"
|
|
qxl_interface_set_compression_level(int qid, int64_t level) "%d %"PRId64
|
|
qxl_interface_update_area_complete(int qid, uint32_t surface_id, uint32_t dirty_left, uint32_t dirty_right, uint32_t dirty_top, uint32_t dirty_bottom) "%d surface=%d [%d,%d,%d,%d]"
|
|
qxl_interface_update_area_complete_rest(int qid, uint32_t num_updated_rects) "%d #=%d"
|
|
qxl_interface_update_area_complete_overflow(int qid, int max) "%d max=%d"
|
|
qxl_interface_update_area_complete_schedule_bh(int qid, uint32_t num_dirty) "%d #dirty=%d"
|
|
qxl_io_destroy_primary_ignored(int qid, const char *mode) "%d %s"
|
|
qxl_io_log(int qid, const char *log_buf) "%d %s"
|
|
qxl_io_read_unexpected(int qid) "%d"
|
|
qxl_io_unexpected_vga_mode(int qid, uint64_t addr, uint64_t val, const char *desc) "%d 0x%"PRIx64"=%"PRIu64" (%s)"
|
|
qxl_io_write(int qid, const char *mode, uint64_t addr, const char *aname, uint64_t val, unsigned size, int async) "%d %s addr=%"PRIu64 " (%s) val=%"PRIu64" size=%u async=%d"
|
|
qxl_memslot_add_guest(int qid, uint32_t slot_id, uint64_t guest_start, uint64_t guest_end) "%d %u: guest phys 0x%"PRIx64 " - 0x%" PRIx64
|
|
qxl_post_load(int qid, const char *mode) "%d %s"
|
|
qxl_pre_load(int qid) "%d"
|
|
qxl_pre_save(int qid) "%d"
|
|
qxl_reset_surfaces(int qid) "%d"
|
|
qxl_ring_command_check(int qid, const char *mode) "%d %s"
|
|
qxl_ring_command_get(int qid, const char *mode) "%d %s"
|
|
qxl_ring_command_req_notification(int qid) "%d"
|
|
qxl_ring_cursor_check(int qid, const char *mode) "%d %s"
|
|
qxl_ring_cursor_get(int qid, const char *mode) "%d %s"
|
|
qxl_ring_cursor_req_notification(int qid) "%d"
|
|
qxl_ring_res_push(int qid, const char *mode, uint32_t surface_count, uint32_t free_res, void *last_release, const char *notify) "%d %s s#=%d res#=%d last=%p notify=%s"
|
|
qxl_ring_res_push_rest(int qid, uint32_t ring_has, uint32_t ring_size, uint32_t prod, uint32_t cons) "%d ring %d/%d [%d,%d]"
|
|
qxl_ring_res_put(int qid, uint32_t free_res) "%d #res=%d"
|
|
qxl_set_mode(int qid, int modenr, uint32_t x_res, uint32_t y_res, uint32_t bits, uint64_t devmem) "%d mode=%d [ x=%d y=%d @ bpp=%d devmem=0x%" PRIx64 " ]"
|
|
qxl_soft_reset(int qid) "%d"
|
|
qxl_spice_destroy_surfaces_complete(int qid) "%d"
|
|
qxl_spice_destroy_surfaces(int qid, int async) "%d async=%d"
|
|
qxl_spice_destroy_surface_wait_complete(int qid, uint32_t id) "%d sid=%d"
|
|
qxl_spice_destroy_surface_wait(int qid, uint32_t id, int async) "%d sid=%d async=%d"
|
|
qxl_spice_flush_surfaces_async(int qid, uint32_t surface_count, uint32_t num_free_res) "%d s#=%d, res#=%d"
|
|
qxl_spice_monitors_config(int qid) "%d"
|
|
qxl_spice_loadvm_commands(int qid, void *ext, uint32_t count) "%d ext=%p count=%d"
|
|
qxl_spice_oom(int qid) "%d"
|
|
qxl_spice_reset_cursor(int qid) "%d"
|
|
qxl_spice_reset_image_cache(int qid) "%d"
|
|
qxl_spice_reset_memslots(int qid) "%d"
|
|
qxl_spice_update_area(int qid, uint32_t surface_id, uint32_t left, uint32_t right, uint32_t top, uint32_t bottom) "%d sid=%d [%d,%d,%d,%d]"
|
|
qxl_spice_update_area_rest(int qid, uint32_t num_dirty_rects, uint32_t clear_dirty_region) "%d #d=%d clear=%d"
|
|
qxl_surfaces_dirty(int qid, uint64_t offset, uint64_t size) "%d offset=0x%"PRIx64" size=0x%"PRIx64
|
|
qxl_send_events(int qid, uint32_t events) "%d %d"
|
|
qxl_send_events_vm_stopped(int qid, uint32_t events) "%d %d"
|
|
qxl_set_guest_bug(int qid) "%d"
|
|
qxl_interrupt_client_monitors_config(int qid, int num_heads, void *heads) "%d %d %p"
|
|
qxl_client_monitors_config_unsupported_by_guest(int qid, uint32_t int_mask, void *client_monitors_config) "%d 0x%X %p"
|
|
qxl_client_monitors_config_unsupported_by_device(int qid, int revision) "%d revision=%d"
|
|
qxl_client_monitors_config_capped(int qid, int requested, int limit) "%d %d %d"
|
|
qxl_client_monitors_config_crc(int qid, unsigned size, uint32_t crc32) "%d %u %u"
|
|
qxl_set_client_capabilities_unsupported_by_revision(int qid, int revision) "%d revision=%d"
|
|
|
|
# hw/display/qxl-render.c
|
|
qxl_render_blit(int32_t stride, int32_t left, int32_t right, int32_t top, int32_t bottom) "stride=%d [%d, %d, %d, %d]"
|
|
qxl_render_guest_primary_resized(int32_t width, int32_t height, int32_t stride, int32_t bytes_pp, int32_t bits_pp) "%dx%d, stride %d, bpp %d, depth %d"
|
|
qxl_render_update_area_done(void *cookie) "%p"
|
|
|
|
# hw/display/vga.c
|
|
vga_std_read_io(uint32_t addr, uint32_t val) "addr 0x%x, val 0x%x"
|
|
vga_std_write_io(uint32_t addr, uint32_t val) "addr 0x%x, val 0x%x"
|
|
vga_vbe_read(uint32_t index, uint32_t val) "index 0x%x, val 0x%x"
|
|
vga_vbe_write(uint32_t index, uint32_t val) "index 0x%x, val 0x%x"
|
|
|
|
# hw/display/cirrus_vga.c
|
|
vga_cirrus_read_io(uint32_t addr, uint32_t val) "addr 0x%x, val 0x%x"
|
|
vga_cirrus_write_io(uint32_t addr, uint32_t val) "addr 0x%x, val 0x%x"
|
|
vga_cirrus_read_blt(uint32_t offset, uint32_t val) "offset 0x%x, val 0x%x"
|
|
vga_cirrus_write_blt(uint32_t offset, uint32_t val) "offset 0x%x, val 0x%x"
|
|
|
|
# hw/display/sii9022.c
|
|
sii9022_read_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x"
|
|
sii9022_write_reg(uint8_t addr, uint8_t val) "addr 0x%02x, val 0x%02x"
|
|
sii9022_switch_mode(const char *mode) "mode: %s"
|