This allows qemu to run the "normal" power on reset boot path through u-boot, where the DDR is trained. An enhancement would be to have the SCU bit stick across qemu reboots, but be unset on initial boot. Proper modelling would be to discard all writes to the phy setting regs at offset 0x100 - 0x400 and to model the phy status regs at offset 0x400. The status regs model would only need to account for offets 0x00, 0x50, 0x68 and 0x7c. Signed-off-by: Joel Stanley <joel@jms.id.au> [ clg: checkpatch fixes ] Message-Id: <20200819100956.2216690-17-clg@kaod.org> Signed-off-by: Cédric Le Goater <clg@kaod.org>
710 lines
22 KiB
C
710 lines
22 KiB
C
/*
|
|
* ASPEED System Control Unit
|
|
*
|
|
* Andrew Jeffery <andrew@aj.id.au>
|
|
*
|
|
* Copyright 2016 IBM Corp.
|
|
*
|
|
* This code is licensed under the GPL version 2 or later. See
|
|
* the COPYING file in the top-level directory.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "hw/misc/aspeed_scu.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "migration/vmstate.h"
|
|
#include "qapi/error.h"
|
|
#include "qapi/visitor.h"
|
|
#include "qemu/bitops.h"
|
|
#include "qemu/log.h"
|
|
#include "qemu/guest-random.h"
|
|
#include "qemu/module.h"
|
|
#include "trace.h"
|
|
|
|
#define TO_REG(offset) ((offset) >> 2)
|
|
|
|
#define PROT_KEY TO_REG(0x00)
|
|
#define SYS_RST_CTRL TO_REG(0x04)
|
|
#define CLK_SEL TO_REG(0x08)
|
|
#define CLK_STOP_CTRL TO_REG(0x0C)
|
|
#define FREQ_CNTR_CTRL TO_REG(0x10)
|
|
#define FREQ_CNTR_EVAL TO_REG(0x14)
|
|
#define IRQ_CTRL TO_REG(0x18)
|
|
#define D2PLL_PARAM TO_REG(0x1C)
|
|
#define MPLL_PARAM TO_REG(0x20)
|
|
#define HPLL_PARAM TO_REG(0x24)
|
|
#define FREQ_CNTR_RANGE TO_REG(0x28)
|
|
#define MISC_CTRL1 TO_REG(0x2C)
|
|
#define PCI_CTRL1 TO_REG(0x30)
|
|
#define PCI_CTRL2 TO_REG(0x34)
|
|
#define PCI_CTRL3 TO_REG(0x38)
|
|
#define SYS_RST_STATUS TO_REG(0x3C)
|
|
#define SOC_SCRATCH1 TO_REG(0x40)
|
|
#define SOC_SCRATCH2 TO_REG(0x44)
|
|
#define MAC_CLK_DELAY TO_REG(0x48)
|
|
#define MISC_CTRL2 TO_REG(0x4C)
|
|
#define VGA_SCRATCH1 TO_REG(0x50)
|
|
#define VGA_SCRATCH2 TO_REG(0x54)
|
|
#define VGA_SCRATCH3 TO_REG(0x58)
|
|
#define VGA_SCRATCH4 TO_REG(0x5C)
|
|
#define VGA_SCRATCH5 TO_REG(0x60)
|
|
#define VGA_SCRATCH6 TO_REG(0x64)
|
|
#define VGA_SCRATCH7 TO_REG(0x68)
|
|
#define VGA_SCRATCH8 TO_REG(0x6C)
|
|
#define HW_STRAP1 TO_REG(0x70)
|
|
#define RNG_CTRL TO_REG(0x74)
|
|
#define RNG_DATA TO_REG(0x78)
|
|
#define SILICON_REV TO_REG(0x7C)
|
|
#define PINMUX_CTRL1 TO_REG(0x80)
|
|
#define PINMUX_CTRL2 TO_REG(0x84)
|
|
#define PINMUX_CTRL3 TO_REG(0x88)
|
|
#define PINMUX_CTRL4 TO_REG(0x8C)
|
|
#define PINMUX_CTRL5 TO_REG(0x90)
|
|
#define PINMUX_CTRL6 TO_REG(0x94)
|
|
#define WDT_RST_CTRL TO_REG(0x9C)
|
|
#define PINMUX_CTRL7 TO_REG(0xA0)
|
|
#define PINMUX_CTRL8 TO_REG(0xA4)
|
|
#define PINMUX_CTRL9 TO_REG(0xA8)
|
|
#define WAKEUP_EN TO_REG(0xC0)
|
|
#define WAKEUP_CTRL TO_REG(0xC4)
|
|
#define HW_STRAP2 TO_REG(0xD0)
|
|
#define FREE_CNTR4 TO_REG(0xE0)
|
|
#define FREE_CNTR4_EXT TO_REG(0xE4)
|
|
#define CPU2_CTRL TO_REG(0x100)
|
|
#define CPU2_BASE_SEG1 TO_REG(0x104)
|
|
#define CPU2_BASE_SEG2 TO_REG(0x108)
|
|
#define CPU2_BASE_SEG3 TO_REG(0x10C)
|
|
#define CPU2_BASE_SEG4 TO_REG(0x110)
|
|
#define CPU2_BASE_SEG5 TO_REG(0x114)
|
|
#define CPU2_CACHE_CTRL TO_REG(0x118)
|
|
#define CHIP_ID0 TO_REG(0x150)
|
|
#define CHIP_ID1 TO_REG(0x154)
|
|
#define UART_HPLL_CLK TO_REG(0x160)
|
|
#define PCIE_CTRL TO_REG(0x180)
|
|
#define BMC_MMIO_CTRL TO_REG(0x184)
|
|
#define RELOC_DECODE_BASE1 TO_REG(0x188)
|
|
#define RELOC_DECODE_BASE2 TO_REG(0x18C)
|
|
#define MAILBOX_DECODE_BASE TO_REG(0x190)
|
|
#define SRAM_DECODE_BASE1 TO_REG(0x194)
|
|
#define SRAM_DECODE_BASE2 TO_REG(0x198)
|
|
#define BMC_REV TO_REG(0x19C)
|
|
#define BMC_DEV_ID TO_REG(0x1A4)
|
|
|
|
#define AST2600_PROT_KEY TO_REG(0x00)
|
|
#define AST2600_SILICON_REV TO_REG(0x04)
|
|
#define AST2600_SILICON_REV2 TO_REG(0x14)
|
|
#define AST2600_SYS_RST_CTRL TO_REG(0x40)
|
|
#define AST2600_SYS_RST_CTRL_CLR TO_REG(0x44)
|
|
#define AST2600_SYS_RST_CTRL2 TO_REG(0x50)
|
|
#define AST2600_SYS_RST_CTRL2_CLR TO_REG(0x54)
|
|
#define AST2600_CLK_STOP_CTRL TO_REG(0x80)
|
|
#define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84)
|
|
#define AST2600_CLK_STOP_CTRL2 TO_REG(0x90)
|
|
#define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94)
|
|
#define AST2600_SDRAM_HANDSHAKE TO_REG(0x100)
|
|
#define AST2600_HPLL_PARAM TO_REG(0x200)
|
|
#define AST2600_HPLL_EXT TO_REG(0x204)
|
|
#define AST2600_MPLL_EXT TO_REG(0x224)
|
|
#define AST2600_EPLL_EXT TO_REG(0x244)
|
|
#define AST2600_CLK_SEL TO_REG(0x300)
|
|
#define AST2600_CLK_SEL2 TO_REG(0x304)
|
|
#define AST2600_CLK_SEL3 TO_REG(0x310)
|
|
#define AST2600_HW_STRAP1 TO_REG(0x500)
|
|
#define AST2600_HW_STRAP1_CLR TO_REG(0x504)
|
|
#define AST2600_HW_STRAP1_PROT TO_REG(0x508)
|
|
#define AST2600_HW_STRAP2 TO_REG(0x510)
|
|
#define AST2600_HW_STRAP2_CLR TO_REG(0x514)
|
|
#define AST2600_HW_STRAP2_PROT TO_REG(0x518)
|
|
#define AST2600_RNG_CTRL TO_REG(0x524)
|
|
#define AST2600_RNG_DATA TO_REG(0x540)
|
|
#define AST2600_CHIP_ID0 TO_REG(0x5B0)
|
|
#define AST2600_CHIP_ID1 TO_REG(0x5B4)
|
|
|
|
#define AST2600_CLK TO_REG(0x40)
|
|
|
|
#define SCU_IO_REGION_SIZE 0x1000
|
|
|
|
static const uint32_t ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
|
|
[SYS_RST_CTRL] = 0xFFCFFEDCU,
|
|
[CLK_SEL] = 0xF3F40000U,
|
|
[CLK_STOP_CTRL] = 0x19FC3E8BU,
|
|
[D2PLL_PARAM] = 0x00026108U,
|
|
[MPLL_PARAM] = 0x00030291U,
|
|
[HPLL_PARAM] = 0x00000291U,
|
|
[MISC_CTRL1] = 0x00000010U,
|
|
[PCI_CTRL1] = 0x20001A03U,
|
|
[PCI_CTRL2] = 0x20001A03U,
|
|
[PCI_CTRL3] = 0x04000030U,
|
|
[SYS_RST_STATUS] = 0x00000001U,
|
|
[SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */
|
|
[MISC_CTRL2] = 0x00000023U,
|
|
[RNG_CTRL] = 0x0000000EU,
|
|
[PINMUX_CTRL2] = 0x0000F000U,
|
|
[PINMUX_CTRL3] = 0x01000000U,
|
|
[PINMUX_CTRL4] = 0x000000FFU,
|
|
[PINMUX_CTRL5] = 0x0000A000U,
|
|
[WDT_RST_CTRL] = 0x003FFFF3U,
|
|
[PINMUX_CTRL8] = 0xFFFF0000U,
|
|
[PINMUX_CTRL9] = 0x000FFFFFU,
|
|
[FREE_CNTR4] = 0x000000FFU,
|
|
[FREE_CNTR4_EXT] = 0x000000FFU,
|
|
[CPU2_BASE_SEG1] = 0x80000000U,
|
|
[CPU2_BASE_SEG4] = 0x1E600000U,
|
|
[CPU2_BASE_SEG5] = 0xC0000000U,
|
|
[UART_HPLL_CLK] = 0x00001903U,
|
|
[PCIE_CTRL] = 0x0000007BU,
|
|
[BMC_DEV_ID] = 0x00002402U
|
|
};
|
|
|
|
/* SCU70 bit 23: 0 24Mhz. bit 11:9: 0b001 AXI:ABH ratio 2:1 */
|
|
/* AST2500 revision A1 */
|
|
|
|
static const uint32_t ast2500_a1_resets[ASPEED_SCU_NR_REGS] = {
|
|
[SYS_RST_CTRL] = 0xFFCFFEDCU,
|
|
[CLK_SEL] = 0xF3F40000U,
|
|
[CLK_STOP_CTRL] = 0x19FC3E8BU,
|
|
[D2PLL_PARAM] = 0x00026108U,
|
|
[MPLL_PARAM] = 0x00030291U,
|
|
[HPLL_PARAM] = 0x93000400U,
|
|
[MISC_CTRL1] = 0x00000010U,
|
|
[PCI_CTRL1] = 0x20001A03U,
|
|
[PCI_CTRL2] = 0x20001A03U,
|
|
[PCI_CTRL3] = 0x04000030U,
|
|
[SYS_RST_STATUS] = 0x00000001U,
|
|
[SOC_SCRATCH1] = 0x000000C0U, /* SoC completed DRAM init */
|
|
[MISC_CTRL2] = 0x00000023U,
|
|
[RNG_CTRL] = 0x0000000EU,
|
|
[PINMUX_CTRL2] = 0x0000F000U,
|
|
[PINMUX_CTRL3] = 0x03000000U,
|
|
[PINMUX_CTRL4] = 0x00000000U,
|
|
[PINMUX_CTRL5] = 0x0000A000U,
|
|
[WDT_RST_CTRL] = 0x023FFFF3U,
|
|
[PINMUX_CTRL8] = 0xFFFF0000U,
|
|
[PINMUX_CTRL9] = 0x000FFFFFU,
|
|
[FREE_CNTR4] = 0x000000FFU,
|
|
[FREE_CNTR4_EXT] = 0x000000FFU,
|
|
[CPU2_BASE_SEG1] = 0x80000000U,
|
|
[CPU2_BASE_SEG4] = 0x1E600000U,
|
|
[CPU2_BASE_SEG5] = 0xC0000000U,
|
|
[CHIP_ID0] = 0x1234ABCDU,
|
|
[CHIP_ID1] = 0x88884444U,
|
|
[UART_HPLL_CLK] = 0x00001903U,
|
|
[PCIE_CTRL] = 0x0000007BU,
|
|
[BMC_DEV_ID] = 0x00002402U
|
|
};
|
|
|
|
static uint32_t aspeed_scu_get_random(void)
|
|
{
|
|
uint32_t num;
|
|
qemu_guest_getrandom_nofail(&num, sizeof(num));
|
|
return num;
|
|
}
|
|
|
|
uint32_t aspeed_scu_get_apb_freq(AspeedSCUState *s)
|
|
{
|
|
AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(s);
|
|
uint32_t hpll = asc->calc_hpll(s, s->regs[HPLL_PARAM]);
|
|
|
|
return hpll / (SCU_CLK_GET_PCLK_DIV(s->regs[CLK_SEL]) + 1)
|
|
/ asc->apb_divider;
|
|
}
|
|
|
|
static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(opaque);
|
|
int reg = TO_REG(offset);
|
|
|
|
if (reg >= ASPEED_SCU_NR_REGS) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return 0;
|
|
}
|
|
|
|
switch (reg) {
|
|
case RNG_DATA:
|
|
/* On hardware, RNG_DATA works regardless of
|
|
* the state of the enable bit in RNG_CTRL
|
|
*/
|
|
s->regs[RNG_DATA] = aspeed_scu_get_random();
|
|
break;
|
|
case WAKEUP_EN:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Read of write-only offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
break;
|
|
}
|
|
|
|
return s->regs[reg];
|
|
}
|
|
|
|
static void aspeed_ast2400_scu_write(void *opaque, hwaddr offset,
|
|
uint64_t data, unsigned size)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(opaque);
|
|
int reg = TO_REG(offset);
|
|
|
|
if (reg >= ASPEED_SCU_NR_REGS) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
|
|
!s->regs[PROT_KEY]) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
|
|
}
|
|
|
|
trace_aspeed_scu_write(offset, size, data);
|
|
|
|
switch (reg) {
|
|
case PROT_KEY:
|
|
s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0;
|
|
return;
|
|
case SILICON_REV:
|
|
case FREQ_CNTR_EVAL:
|
|
case VGA_SCRATCH1 ... VGA_SCRATCH8:
|
|
case RNG_DATA:
|
|
case FREE_CNTR4:
|
|
case FREE_CNTR4_EXT:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
s->regs[reg] = data;
|
|
}
|
|
|
|
static void aspeed_ast2500_scu_write(void *opaque, hwaddr offset,
|
|
uint64_t data, unsigned size)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(opaque);
|
|
int reg = TO_REG(offset);
|
|
|
|
if (reg >= ASPEED_SCU_NR_REGS) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
if (reg > PROT_KEY && reg < CPU2_BASE_SEG1 &&
|
|
!s->regs[PROT_KEY]) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
|
|
return;
|
|
}
|
|
|
|
trace_aspeed_scu_write(offset, size, data);
|
|
|
|
switch (reg) {
|
|
case PROT_KEY:
|
|
s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0;
|
|
return;
|
|
case HW_STRAP1:
|
|
s->regs[HW_STRAP1] |= data;
|
|
return;
|
|
case SILICON_REV:
|
|
s->regs[HW_STRAP1] &= ~data;
|
|
return;
|
|
case FREQ_CNTR_EVAL:
|
|
case VGA_SCRATCH1 ... VGA_SCRATCH8:
|
|
case RNG_DATA:
|
|
case FREE_CNTR4:
|
|
case FREE_CNTR4_EXT:
|
|
case CHIP_ID0:
|
|
case CHIP_ID1:
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
s->regs[reg] = data;
|
|
}
|
|
|
|
static const MemoryRegionOps aspeed_ast2400_scu_ops = {
|
|
.read = aspeed_scu_read,
|
|
.write = aspeed_ast2400_scu_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
.valid = {
|
|
.min_access_size = 1,
|
|
.max_access_size = 4,
|
|
},
|
|
};
|
|
|
|
static const MemoryRegionOps aspeed_ast2500_scu_ops = {
|
|
.read = aspeed_scu_read,
|
|
.write = aspeed_ast2500_scu_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
.valid.min_access_size = 4,
|
|
.valid.max_access_size = 4,
|
|
.valid.unaligned = false,
|
|
};
|
|
|
|
static uint32_t aspeed_scu_get_clkin(AspeedSCUState *s)
|
|
{
|
|
if (s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN) {
|
|
return 25000000;
|
|
} else if (s->hw_strap1 & SCU_HW_STRAP_CLK_48M_IN) {
|
|
return 48000000;
|
|
} else {
|
|
return 24000000;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Strapped frequencies for the AST2400 in MHz. They depend on the
|
|
* clkin frequency.
|
|
*/
|
|
static const uint32_t hpll_ast2400_freqs[][4] = {
|
|
{ 384, 360, 336, 408 }, /* 24MHz or 48MHz */
|
|
{ 400, 375, 350, 425 }, /* 25MHz */
|
|
};
|
|
|
|
static uint32_t aspeed_2400_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg)
|
|
{
|
|
uint8_t freq_select;
|
|
bool clk_25m_in;
|
|
uint32_t clkin = aspeed_scu_get_clkin(s);
|
|
|
|
if (hpll_reg & SCU_AST2400_H_PLL_OFF) {
|
|
return 0;
|
|
}
|
|
|
|
if (hpll_reg & SCU_AST2400_H_PLL_PROGRAMMED) {
|
|
uint32_t multiplier = 1;
|
|
|
|
if (!(hpll_reg & SCU_AST2400_H_PLL_BYPASS_EN)) {
|
|
uint32_t n = (hpll_reg >> 5) & 0x3f;
|
|
uint32_t od = (hpll_reg >> 4) & 0x1;
|
|
uint32_t d = hpll_reg & 0xf;
|
|
|
|
multiplier = (2 - od) * ((n + 2) / (d + 1));
|
|
}
|
|
|
|
return clkin * multiplier;
|
|
}
|
|
|
|
/* HW strapping */
|
|
clk_25m_in = !!(s->hw_strap1 & SCU_HW_STRAP_CLK_25M_IN);
|
|
freq_select = SCU_AST2400_HW_STRAP_GET_H_PLL_CLK(s->hw_strap1);
|
|
|
|
return hpll_ast2400_freqs[clk_25m_in][freq_select] * 1000000;
|
|
}
|
|
|
|
static uint32_t aspeed_2500_scu_calc_hpll(AspeedSCUState *s, uint32_t hpll_reg)
|
|
{
|
|
uint32_t multiplier = 1;
|
|
uint32_t clkin = aspeed_scu_get_clkin(s);
|
|
|
|
if (hpll_reg & SCU_H_PLL_OFF) {
|
|
return 0;
|
|
}
|
|
|
|
if (!(hpll_reg & SCU_H_PLL_BYPASS_EN)) {
|
|
uint32_t p = (hpll_reg >> 13) & 0x3f;
|
|
uint32_t m = (hpll_reg >> 5) & 0xff;
|
|
uint32_t n = hpll_reg & 0x1f;
|
|
|
|
multiplier = ((m + 1) / (n + 1)) / (p + 1);
|
|
}
|
|
|
|
return clkin * multiplier;
|
|
}
|
|
|
|
static void aspeed_scu_reset(DeviceState *dev)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(dev);
|
|
AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
|
|
|
|
memcpy(s->regs, asc->resets, asc->nr_regs * 4);
|
|
s->regs[SILICON_REV] = s->silicon_rev;
|
|
s->regs[HW_STRAP1] = s->hw_strap1;
|
|
s->regs[HW_STRAP2] = s->hw_strap2;
|
|
s->regs[PROT_KEY] = s->hw_prot_key;
|
|
}
|
|
|
|
static uint32_t aspeed_silicon_revs[] = {
|
|
AST2400_A0_SILICON_REV,
|
|
AST2400_A1_SILICON_REV,
|
|
AST2500_A0_SILICON_REV,
|
|
AST2500_A1_SILICON_REV,
|
|
AST2600_A0_SILICON_REV,
|
|
AST2600_A1_SILICON_REV,
|
|
};
|
|
|
|
bool is_supported_silicon_rev(uint32_t silicon_rev)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(aspeed_silicon_revs); i++) {
|
|
if (silicon_rev == aspeed_silicon_revs[i]) {
|
|
return true;
|
|
}
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static void aspeed_scu_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
AspeedSCUState *s = ASPEED_SCU(dev);
|
|
AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
|
|
|
|
if (!is_supported_silicon_rev(s->silicon_rev)) {
|
|
error_setg(errp, "Unknown silicon revision: 0x%" PRIx32,
|
|
s->silicon_rev);
|
|
return;
|
|
}
|
|
|
|
memory_region_init_io(&s->iomem, OBJECT(s), asc->ops, s,
|
|
TYPE_ASPEED_SCU, SCU_IO_REGION_SIZE);
|
|
|
|
sysbus_init_mmio(sbd, &s->iomem);
|
|
}
|
|
|
|
static const VMStateDescription vmstate_aspeed_scu = {
|
|
.name = "aspeed.scu",
|
|
.version_id = 2,
|
|
.minimum_version_id = 2,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT32_ARRAY(regs, AspeedSCUState, ASPEED_AST2600_SCU_NR_REGS),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static Property aspeed_scu_properties[] = {
|
|
DEFINE_PROP_UINT32("silicon-rev", AspeedSCUState, silicon_rev, 0),
|
|
DEFINE_PROP_UINT32("hw-strap1", AspeedSCUState, hw_strap1, 0),
|
|
DEFINE_PROP_UINT32("hw-strap2", AspeedSCUState, hw_strap2, 0),
|
|
DEFINE_PROP_UINT32("hw-prot-key", AspeedSCUState, hw_prot_key, 0),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void aspeed_scu_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
dc->realize = aspeed_scu_realize;
|
|
dc->reset = aspeed_scu_reset;
|
|
dc->desc = "ASPEED System Control Unit";
|
|
dc->vmsd = &vmstate_aspeed_scu;
|
|
device_class_set_props(dc, aspeed_scu_properties);
|
|
}
|
|
|
|
static const TypeInfo aspeed_scu_info = {
|
|
.name = TYPE_ASPEED_SCU,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(AspeedSCUState),
|
|
.class_init = aspeed_scu_class_init,
|
|
.class_size = sizeof(AspeedSCUClass),
|
|
.abstract = true,
|
|
};
|
|
|
|
static void aspeed_2400_scu_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
|
|
|
|
dc->desc = "ASPEED 2400 System Control Unit";
|
|
asc->resets = ast2400_a0_resets;
|
|
asc->calc_hpll = aspeed_2400_scu_calc_hpll;
|
|
asc->apb_divider = 2;
|
|
asc->nr_regs = ASPEED_SCU_NR_REGS;
|
|
asc->ops = &aspeed_ast2400_scu_ops;
|
|
}
|
|
|
|
static const TypeInfo aspeed_2400_scu_info = {
|
|
.name = TYPE_ASPEED_2400_SCU,
|
|
.parent = TYPE_ASPEED_SCU,
|
|
.instance_size = sizeof(AspeedSCUState),
|
|
.class_init = aspeed_2400_scu_class_init,
|
|
};
|
|
|
|
static void aspeed_2500_scu_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
|
|
|
|
dc->desc = "ASPEED 2500 System Control Unit";
|
|
asc->resets = ast2500_a1_resets;
|
|
asc->calc_hpll = aspeed_2500_scu_calc_hpll;
|
|
asc->apb_divider = 4;
|
|
asc->nr_regs = ASPEED_SCU_NR_REGS;
|
|
asc->ops = &aspeed_ast2500_scu_ops;
|
|
}
|
|
|
|
static const TypeInfo aspeed_2500_scu_info = {
|
|
.name = TYPE_ASPEED_2500_SCU,
|
|
.parent = TYPE_ASPEED_SCU,
|
|
.instance_size = sizeof(AspeedSCUState),
|
|
.class_init = aspeed_2500_scu_class_init,
|
|
};
|
|
|
|
static uint64_t aspeed_ast2600_scu_read(void *opaque, hwaddr offset,
|
|
unsigned size)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(opaque);
|
|
int reg = TO_REG(offset);
|
|
|
|
if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Out-of-bounds read at offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return 0;
|
|
}
|
|
|
|
switch (reg) {
|
|
case AST2600_HPLL_EXT:
|
|
case AST2600_EPLL_EXT:
|
|
case AST2600_MPLL_EXT:
|
|
/* PLLs are always "locked" */
|
|
return s->regs[reg] | BIT(31);
|
|
case AST2600_RNG_DATA:
|
|
/*
|
|
* On hardware, RNG_DATA works regardless of the state of the
|
|
* enable bit in RNG_CTRL
|
|
*
|
|
* TODO: Check this is true for ast2600
|
|
*/
|
|
s->regs[AST2600_RNG_DATA] = aspeed_scu_get_random();
|
|
break;
|
|
}
|
|
|
|
return s->regs[reg];
|
|
}
|
|
|
|
static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset,
|
|
uint64_t data64, unsigned size)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(opaque);
|
|
int reg = TO_REG(offset);
|
|
/* Truncate here so bitwise operations below behave as expected */
|
|
uint32_t data = data64;
|
|
|
|
if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Out-of-bounds write at offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
if (reg > PROT_KEY && !s->regs[PROT_KEY]) {
|
|
qemu_log_mask(LOG_GUEST_ERROR, "%s: SCU is locked!\n", __func__);
|
|
}
|
|
|
|
trace_aspeed_scu_write(offset, size, data);
|
|
|
|
switch (reg) {
|
|
case AST2600_PROT_KEY:
|
|
s->regs[reg] = (data == ASPEED_SCU_PROT_KEY) ? 1 : 0;
|
|
return;
|
|
case AST2600_HW_STRAP1:
|
|
case AST2600_HW_STRAP2:
|
|
if (s->regs[reg + 2]) {
|
|
return;
|
|
}
|
|
/* fall through */
|
|
case AST2600_SYS_RST_CTRL:
|
|
case AST2600_SYS_RST_CTRL2:
|
|
case AST2600_CLK_STOP_CTRL:
|
|
case AST2600_CLK_STOP_CTRL2:
|
|
/* W1S (Write 1 to set) registers */
|
|
s->regs[reg] |= data;
|
|
return;
|
|
case AST2600_SYS_RST_CTRL_CLR:
|
|
case AST2600_SYS_RST_CTRL2_CLR:
|
|
case AST2600_CLK_STOP_CTRL_CLR:
|
|
case AST2600_CLK_STOP_CTRL2_CLR:
|
|
case AST2600_HW_STRAP1_CLR:
|
|
case AST2600_HW_STRAP2_CLR:
|
|
/*
|
|
* W1C (Write 1 to clear) registers are offset by one address from
|
|
* the data register
|
|
*/
|
|
s->regs[reg - 1] &= ~data;
|
|
return;
|
|
|
|
case AST2600_RNG_DATA:
|
|
case AST2600_SILICON_REV:
|
|
case AST2600_SILICON_REV2:
|
|
case AST2600_CHIP_ID0:
|
|
case AST2600_CHIP_ID1:
|
|
/* Add read only registers here */
|
|
qemu_log_mask(LOG_GUEST_ERROR,
|
|
"%s: Write to read-only offset 0x%" HWADDR_PRIx "\n",
|
|
__func__, offset);
|
|
return;
|
|
}
|
|
|
|
s->regs[reg] = data;
|
|
}
|
|
|
|
static const MemoryRegionOps aspeed_ast2600_scu_ops = {
|
|
.read = aspeed_ast2600_scu_read,
|
|
.write = aspeed_ast2600_scu_write,
|
|
.endianness = DEVICE_LITTLE_ENDIAN,
|
|
.valid.min_access_size = 4,
|
|
.valid.max_access_size = 4,
|
|
.valid.unaligned = false,
|
|
};
|
|
|
|
static const uint32_t ast2600_a1_resets[ASPEED_AST2600_SCU_NR_REGS] = {
|
|
[AST2600_SYS_RST_CTRL] = 0xF7C3FED8,
|
|
[AST2600_SYS_RST_CTRL2] = 0xFFFFFFFC,
|
|
[AST2600_CLK_STOP_CTRL] = 0xFFFF7F8A,
|
|
[AST2600_CLK_STOP_CTRL2] = 0xFFF0FFF0,
|
|
[AST2600_SDRAM_HANDSHAKE] = 0x00000000,
|
|
[AST2600_HPLL_PARAM] = 0x1000405F,
|
|
[AST2600_CHIP_ID0] = 0x1234ABCD,
|
|
[AST2600_CHIP_ID1] = 0x88884444,
|
|
|
|
};
|
|
|
|
static void aspeed_ast2600_scu_reset(DeviceState *dev)
|
|
{
|
|
AspeedSCUState *s = ASPEED_SCU(dev);
|
|
AspeedSCUClass *asc = ASPEED_SCU_GET_CLASS(dev);
|
|
|
|
memcpy(s->regs, asc->resets, asc->nr_regs * 4);
|
|
|
|
s->regs[AST2600_SILICON_REV] = s->silicon_rev;
|
|
s->regs[AST2600_SILICON_REV2] = s->silicon_rev;
|
|
s->regs[AST2600_HW_STRAP1] = s->hw_strap1;
|
|
s->regs[AST2600_HW_STRAP2] = s->hw_strap2;
|
|
s->regs[PROT_KEY] = s->hw_prot_key;
|
|
}
|
|
|
|
static void aspeed_2600_scu_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
AspeedSCUClass *asc = ASPEED_SCU_CLASS(klass);
|
|
|
|
dc->desc = "ASPEED 2600 System Control Unit";
|
|
dc->reset = aspeed_ast2600_scu_reset;
|
|
asc->resets = ast2600_a1_resets;
|
|
asc->calc_hpll = aspeed_2500_scu_calc_hpll; /* No change since AST2500 */
|
|
asc->apb_divider = 4;
|
|
asc->nr_regs = ASPEED_AST2600_SCU_NR_REGS;
|
|
asc->ops = &aspeed_ast2600_scu_ops;
|
|
}
|
|
|
|
static const TypeInfo aspeed_2600_scu_info = {
|
|
.name = TYPE_ASPEED_2600_SCU,
|
|
.parent = TYPE_ASPEED_SCU,
|
|
.instance_size = sizeof(AspeedSCUState),
|
|
.class_init = aspeed_2600_scu_class_init,
|
|
};
|
|
|
|
static void aspeed_scu_register_types(void)
|
|
{
|
|
type_register_static(&aspeed_scu_info);
|
|
type_register_static(&aspeed_2400_scu_info);
|
|
type_register_static(&aspeed_2500_scu_info);
|
|
type_register_static(&aspeed_2600_scu_info);
|
|
}
|
|
|
|
type_init(aspeed_scu_register_types);
|