qemu-patch-raspberry4/block/linux-aio.c
Stefano Garzarella d7ddd0a161 linux-aio: limit the batch size using aio-max-batch parameter
When there are multiple queues attached to the same AIO context,
some requests may experience high latency, since in the worst case
the AIO engine queue is only flushed when it is full (MAX_EVENTS) or
there are no more queues plugged.

Commit 2558cb8dd4 ("linux-aio: increasing MAX_EVENTS to a larger
hardcoded value") changed MAX_EVENTS from 128 to 1024, to increase
the number of in-flight requests. But this change also increased
the potential maximum batch to 1024 elements.

When there is a single queue attached to the AIO context, the issue
is mitigated from laio_io_unplug() that will flush the queue every
time is invoked since there can't be others queue plugged.

Let's use the new `aio-max-batch` IOThread parameter to mitigate
this issue, limiting the number of requests in a batch.

We also define a default value (32): this value is obtained running
some benchmarks and it represents a good tradeoff between the latency
increase while a request is queued and the cost of the io_submit(2)
system call.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20210721094211.69853-4-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2021-07-21 13:47:50 +01:00

467 lines
13 KiB
C

/*
* Linux native AIO support.
*
* Copyright (C) 2009 IBM, Corp.
* Copyright (C) 2009 Red Hat, Inc.
*
* This work is licensed under the terms of the GNU GPL, version 2 or later.
* See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "block/aio.h"
#include "qemu/queue.h"
#include "block/block.h"
#include "block/raw-aio.h"
#include "qemu/event_notifier.h"
#include "qemu/coroutine.h"
#include "qapi/error.h"
#include <libaio.h>
/*
* Queue size (per-device).
*
* XXX: eventually we need to communicate this to the guest and/or make it
* tunable by the guest. If we get more outstanding requests at a time
* than this we will get EAGAIN from io_submit which is communicated to
* the guest as an I/O error.
*/
#define MAX_EVENTS 1024
/* Maximum number of requests in a batch. (default value) */
#define DEFAULT_MAX_BATCH 32
struct qemu_laiocb {
Coroutine *co;
LinuxAioState *ctx;
struct iocb iocb;
ssize_t ret;
size_t nbytes;
QEMUIOVector *qiov;
bool is_read;
QSIMPLEQ_ENTRY(qemu_laiocb) next;
};
typedef struct {
int plugged;
unsigned int in_queue;
unsigned int in_flight;
bool blocked;
QSIMPLEQ_HEAD(, qemu_laiocb) pending;
} LaioQueue;
struct LinuxAioState {
AioContext *aio_context;
io_context_t ctx;
EventNotifier e;
/* io queue for submit at batch. Protected by AioContext lock. */
LaioQueue io_q;
/* I/O completion processing. Only runs in I/O thread. */
QEMUBH *completion_bh;
int event_idx;
int event_max;
};
static void ioq_submit(LinuxAioState *s);
static inline ssize_t io_event_ret(struct io_event *ev)
{
return (ssize_t)(((uint64_t)ev->res2 << 32) | ev->res);
}
/*
* Completes an AIO request.
*/
static void qemu_laio_process_completion(struct qemu_laiocb *laiocb)
{
int ret;
ret = laiocb->ret;
if (ret != -ECANCELED) {
if (ret == laiocb->nbytes) {
ret = 0;
} else if (ret >= 0) {
/* Short reads mean EOF, pad with zeros. */
if (laiocb->is_read) {
qemu_iovec_memset(laiocb->qiov, ret, 0,
laiocb->qiov->size - ret);
} else {
ret = -ENOSPC;
}
}
}
laiocb->ret = ret;
/*
* If the coroutine is already entered it must be in ioq_submit() and
* will notice laio->ret has been filled in when it eventually runs
* later. Coroutines cannot be entered recursively so avoid doing
* that!
*/
if (!qemu_coroutine_entered(laiocb->co)) {
aio_co_wake(laiocb->co);
}
}
/**
* aio_ring buffer which is shared between userspace and kernel.
*
* This copied from linux/fs/aio.c, common header does not exist
* but AIO exists for ages so we assume ABI is stable.
*/
struct aio_ring {
unsigned id; /* kernel internal index number */
unsigned nr; /* number of io_events */
unsigned head; /* Written to by userland or by kernel. */
unsigned tail;
unsigned magic;
unsigned compat_features;
unsigned incompat_features;
unsigned header_length; /* size of aio_ring */
struct io_event io_events[];
};
/**
* io_getevents_peek:
* @ctx: AIO context
* @events: pointer on events array, output value
* Returns the number of completed events and sets a pointer
* on events array. This function does not update the internal
* ring buffer, only reads head and tail. When @events has been
* processed io_getevents_commit() must be called.
*/
static inline unsigned int io_getevents_peek(io_context_t ctx,
struct io_event **events)
{
struct aio_ring *ring = (struct aio_ring *)ctx;
unsigned int head = ring->head, tail = ring->tail;
unsigned int nr;
nr = tail >= head ? tail - head : ring->nr - head;
*events = ring->io_events + head;
/* To avoid speculative loads of s->events[i] before observing tail.
Paired with smp_wmb() inside linux/fs/aio.c: aio_complete(). */
smp_rmb();
return nr;
}
/**
* io_getevents_commit:
* @ctx: AIO context
* @nr: the number of events on which head should be advanced
*
* Advances head of a ring buffer.
*/
static inline void io_getevents_commit(io_context_t ctx, unsigned int nr)
{
struct aio_ring *ring = (struct aio_ring *)ctx;
if (nr) {
ring->head = (ring->head + nr) % ring->nr;
}
}
/**
* io_getevents_advance_and_peek:
* @ctx: AIO context
* @events: pointer on events array, output value
* @nr: the number of events on which head should be advanced
*
* Advances head of a ring buffer and returns number of elements left.
*/
static inline unsigned int
io_getevents_advance_and_peek(io_context_t ctx,
struct io_event **events,
unsigned int nr)
{
io_getevents_commit(ctx, nr);
return io_getevents_peek(ctx, events);
}
/**
* qemu_laio_process_completions:
* @s: AIO state
*
* Fetches completed I/O requests and invokes their callbacks.
*
* The function is somewhat tricky because it supports nested event loops, for
* example when a request callback invokes aio_poll(). In order to do this,
* indices are kept in LinuxAioState. Function schedules BH completion so it
* can be called again in a nested event loop. When there are no events left
* to complete the BH is being canceled.
*/
static void qemu_laio_process_completions(LinuxAioState *s)
{
struct io_event *events;
/* Reschedule so nested event loops see currently pending completions */
qemu_bh_schedule(s->completion_bh);
while ((s->event_max = io_getevents_advance_and_peek(s->ctx, &events,
s->event_idx))) {
for (s->event_idx = 0; s->event_idx < s->event_max; ) {
struct iocb *iocb = events[s->event_idx].obj;
struct qemu_laiocb *laiocb =
container_of(iocb, struct qemu_laiocb, iocb);
laiocb->ret = io_event_ret(&events[s->event_idx]);
/* Change counters one-by-one because we can be nested. */
s->io_q.in_flight--;
s->event_idx++;
qemu_laio_process_completion(laiocb);
}
}
qemu_bh_cancel(s->completion_bh);
/* If we are nested we have to notify the level above that we are done
* by setting event_max to zero, upper level will then jump out of it's
* own `for` loop. If we are the last all counters droped to zero. */
s->event_max = 0;
s->event_idx = 0;
}
static void qemu_laio_process_completions_and_submit(LinuxAioState *s)
{
aio_context_acquire(s->aio_context);
qemu_laio_process_completions(s);
if (!s->io_q.plugged && !QSIMPLEQ_EMPTY(&s->io_q.pending)) {
ioq_submit(s);
}
aio_context_release(s->aio_context);
}
static void qemu_laio_completion_bh(void *opaque)
{
LinuxAioState *s = opaque;
qemu_laio_process_completions_and_submit(s);
}
static void qemu_laio_completion_cb(EventNotifier *e)
{
LinuxAioState *s = container_of(e, LinuxAioState, e);
if (event_notifier_test_and_clear(&s->e)) {
qemu_laio_process_completions_and_submit(s);
}
}
static bool qemu_laio_poll_cb(void *opaque)
{
EventNotifier *e = opaque;
LinuxAioState *s = container_of(e, LinuxAioState, e);
struct io_event *events;
if (!io_getevents_peek(s->ctx, &events)) {
return false;
}
qemu_laio_process_completions_and_submit(s);
return true;
}
static void ioq_init(LaioQueue *io_q)
{
QSIMPLEQ_INIT(&io_q->pending);
io_q->plugged = 0;
io_q->in_queue = 0;
io_q->in_flight = 0;
io_q->blocked = false;
}
static void ioq_submit(LinuxAioState *s)
{
int ret, len;
struct qemu_laiocb *aiocb;
struct iocb *iocbs[MAX_EVENTS];
QSIMPLEQ_HEAD(, qemu_laiocb) completed;
do {
if (s->io_q.in_flight >= MAX_EVENTS) {
break;
}
len = 0;
QSIMPLEQ_FOREACH(aiocb, &s->io_q.pending, next) {
iocbs[len++] = &aiocb->iocb;
if (s->io_q.in_flight + len >= MAX_EVENTS) {
break;
}
}
ret = io_submit(s->ctx, len, iocbs);
if (ret == -EAGAIN) {
break;
}
if (ret < 0) {
/* Fail the first request, retry the rest */
aiocb = QSIMPLEQ_FIRST(&s->io_q.pending);
QSIMPLEQ_REMOVE_HEAD(&s->io_q.pending, next);
s->io_q.in_queue--;
aiocb->ret = ret;
qemu_laio_process_completion(aiocb);
continue;
}
s->io_q.in_flight += ret;
s->io_q.in_queue -= ret;
aiocb = container_of(iocbs[ret - 1], struct qemu_laiocb, iocb);
QSIMPLEQ_SPLIT_AFTER(&s->io_q.pending, aiocb, next, &completed);
} while (ret == len && !QSIMPLEQ_EMPTY(&s->io_q.pending));
s->io_q.blocked = (s->io_q.in_queue > 0);
if (s->io_q.in_flight) {
/* We can try to complete something just right away if there are
* still requests in-flight. */
qemu_laio_process_completions(s);
/*
* Even we have completed everything (in_flight == 0), the queue can
* have still pended requests (in_queue > 0). We do not attempt to
* repeat submission to avoid IO hang. The reason is simple: s->e is
* still set and completion callback will be called shortly and all
* pended requests will be submitted from there.
*/
}
}
void laio_io_plug(BlockDriverState *bs, LinuxAioState *s)
{
s->io_q.plugged++;
}
void laio_io_unplug(BlockDriverState *bs, LinuxAioState *s)
{
assert(s->io_q.plugged);
if (--s->io_q.plugged == 0 &&
!s->io_q.blocked && !QSIMPLEQ_EMPTY(&s->io_q.pending)) {
ioq_submit(s);
}
}
static int laio_do_submit(int fd, struct qemu_laiocb *laiocb, off_t offset,
int type)
{
LinuxAioState *s = laiocb->ctx;
struct iocb *iocbs = &laiocb->iocb;
QEMUIOVector *qiov = laiocb->qiov;
int64_t max_batch = s->aio_context->aio_max_batch ?: DEFAULT_MAX_BATCH;
/* limit the batch with the number of available events */
max_batch = MIN_NON_ZERO(MAX_EVENTS - s->io_q.in_flight, max_batch);
switch (type) {
case QEMU_AIO_WRITE:
io_prep_pwritev(iocbs, fd, qiov->iov, qiov->niov, offset);
break;
case QEMU_AIO_READ:
io_prep_preadv(iocbs, fd, qiov->iov, qiov->niov, offset);
break;
/* Currently Linux kernel does not support other operations */
default:
fprintf(stderr, "%s: invalid AIO request type 0x%x.\n",
__func__, type);
return -EIO;
}
io_set_eventfd(&laiocb->iocb, event_notifier_get_fd(&s->e));
QSIMPLEQ_INSERT_TAIL(&s->io_q.pending, laiocb, next);
s->io_q.in_queue++;
if (!s->io_q.blocked &&
(!s->io_q.plugged ||
s->io_q.in_queue >= max_batch)) {
ioq_submit(s);
}
return 0;
}
int coroutine_fn laio_co_submit(BlockDriverState *bs, LinuxAioState *s, int fd,
uint64_t offset, QEMUIOVector *qiov, int type)
{
int ret;
struct qemu_laiocb laiocb = {
.co = qemu_coroutine_self(),
.nbytes = qiov->size,
.ctx = s,
.ret = -EINPROGRESS,
.is_read = (type == QEMU_AIO_READ),
.qiov = qiov,
};
ret = laio_do_submit(fd, &laiocb, offset, type);
if (ret < 0) {
return ret;
}
if (laiocb.ret == -EINPROGRESS) {
qemu_coroutine_yield();
}
return laiocb.ret;
}
void laio_detach_aio_context(LinuxAioState *s, AioContext *old_context)
{
aio_set_event_notifier(old_context, &s->e, false, NULL, NULL);
qemu_bh_delete(s->completion_bh);
s->aio_context = NULL;
}
void laio_attach_aio_context(LinuxAioState *s, AioContext *new_context)
{
s->aio_context = new_context;
s->completion_bh = aio_bh_new(new_context, qemu_laio_completion_bh, s);
aio_set_event_notifier(new_context, &s->e, false,
qemu_laio_completion_cb,
qemu_laio_poll_cb);
}
LinuxAioState *laio_init(Error **errp)
{
int rc;
LinuxAioState *s;
s = g_malloc0(sizeof(*s));
rc = event_notifier_init(&s->e, false);
if (rc < 0) {
error_setg_errno(errp, -rc, "failed to to initialize event notifier");
goto out_free_state;
}
rc = io_setup(MAX_EVENTS, &s->ctx);
if (rc < 0) {
error_setg_errno(errp, -rc, "failed to create linux AIO context");
goto out_close_efd;
}
ioq_init(&s->io_q);
return s;
out_close_efd:
event_notifier_cleanup(&s->e);
out_free_state:
g_free(s);
return NULL;
}
void laio_cleanup(LinuxAioState *s)
{
event_notifier_cleanup(&s->e);
if (io_destroy(s->ctx) != 0) {
fprintf(stderr, "%s: destroy AIO context %p failed\n",
__func__, &s->ctx);
}
g_free(s);
}