Several QOM type names contain ',':
ARM,bitband-memory
etraxfs,pic
etraxfs,serial
etraxfs,timer
fsl,imx25
fsl,imx31
fsl,imx6
fsl,imx6ul
fsl,imx7
grlib,ahbpnp
grlib,apbpnp
grlib,apbuart
grlib,gptimer
grlib,irqmp
qemu,register
SUNW,bpp
SUNW,CS4231
SUNW,DBRI
SUNW,DBRI.prom
SUNW,fdtwo
SUNW,sx
SUNW,tcx
xilinx,zynq_slcr
xlnx,zynqmp
xlnx,zynqmp-pmu-soc
xlnx,zynq-xadc
These are all device types. They can't be plugged with -device /
device_add, except for xlnx,zynqmp-pmu-soc, and I doubt that one
actually works.
They *can* be used with -device / device_add to request help.
Usability is poor, though: you have to double the comma, like this:
$ qemu-system-x86_64 -device SUNW,,fdtwo,help
Trap for the unwary. The fact that this was broken in
device-introspect-test for more than six years until commit e27bd49876
fixed it demonstrates that "the unwary" includes seasoned developers.
One QOM type name contains ' ': "ICH9 SMB". Because having to
remember just one way to quote would be too easy.
Rename the "SUNW,FOO types to "sun-FOO". Summarily replace ',' and '
' by '-' in the other type names.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20210304140229.575481-2-armbru@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
2971 lines
90 KiB
C
2971 lines
90 KiB
C
/*
|
|
* QEMU Floppy disk emulator (Intel 82078)
|
|
*
|
|
* Copyright (c) 2003, 2007 Jocelyn Mayer
|
|
* Copyright (c) 2008 Hervé Poussineau
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
/*
|
|
* The controller is used in Sun4m systems in a slightly different
|
|
* way. There are changes in DOR register and DMA is not available.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "hw/block/fdc.h"
|
|
#include "qapi/error.h"
|
|
#include "qemu/error-report.h"
|
|
#include "qemu/timer.h"
|
|
#include "hw/acpi/aml-build.h"
|
|
#include "hw/irq.h"
|
|
#include "hw/isa/isa.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "hw/qdev-properties-system.h"
|
|
#include "hw/sysbus.h"
|
|
#include "migration/vmstate.h"
|
|
#include "hw/block/block.h"
|
|
#include "sysemu/block-backend.h"
|
|
#include "sysemu/blockdev.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "qemu/log.h"
|
|
#include "qemu/main-loop.h"
|
|
#include "qemu/module.h"
|
|
#include "trace.h"
|
|
#include "qom/object.h"
|
|
|
|
/********************************************************/
|
|
/* debug Floppy devices */
|
|
|
|
#define DEBUG_FLOPPY 0
|
|
|
|
#define FLOPPY_DPRINTF(fmt, ...) \
|
|
do { \
|
|
if (DEBUG_FLOPPY) { \
|
|
fprintf(stderr, "FLOPPY: " fmt , ## __VA_ARGS__); \
|
|
} \
|
|
} while (0)
|
|
|
|
|
|
/********************************************************/
|
|
/* qdev floppy bus */
|
|
|
|
#define TYPE_FLOPPY_BUS "floppy-bus"
|
|
OBJECT_DECLARE_SIMPLE_TYPE(FloppyBus, FLOPPY_BUS)
|
|
|
|
typedef struct FDCtrl FDCtrl;
|
|
typedef struct FDrive FDrive;
|
|
static FDrive *get_drv(FDCtrl *fdctrl, int unit);
|
|
|
|
struct FloppyBus {
|
|
BusState bus;
|
|
FDCtrl *fdc;
|
|
};
|
|
|
|
static const TypeInfo floppy_bus_info = {
|
|
.name = TYPE_FLOPPY_BUS,
|
|
.parent = TYPE_BUS,
|
|
.instance_size = sizeof(FloppyBus),
|
|
};
|
|
|
|
static void floppy_bus_create(FDCtrl *fdc, FloppyBus *bus, DeviceState *dev)
|
|
{
|
|
qbus_create_inplace(bus, sizeof(FloppyBus), TYPE_FLOPPY_BUS, dev, NULL);
|
|
bus->fdc = fdc;
|
|
}
|
|
|
|
|
|
/********************************************************/
|
|
/* Floppy drive emulation */
|
|
|
|
typedef enum FDriveRate {
|
|
FDRIVE_RATE_500K = 0x00, /* 500 Kbps */
|
|
FDRIVE_RATE_300K = 0x01, /* 300 Kbps */
|
|
FDRIVE_RATE_250K = 0x02, /* 250 Kbps */
|
|
FDRIVE_RATE_1M = 0x03, /* 1 Mbps */
|
|
} FDriveRate;
|
|
|
|
typedef enum FDriveSize {
|
|
FDRIVE_SIZE_UNKNOWN,
|
|
FDRIVE_SIZE_350,
|
|
FDRIVE_SIZE_525,
|
|
} FDriveSize;
|
|
|
|
typedef struct FDFormat {
|
|
FloppyDriveType drive;
|
|
uint8_t last_sect;
|
|
uint8_t max_track;
|
|
uint8_t max_head;
|
|
FDriveRate rate;
|
|
} FDFormat;
|
|
|
|
/* In many cases, the total sector size of a format is enough to uniquely
|
|
* identify it. However, there are some total sector collisions between
|
|
* formats of different physical size, and these are noted below by
|
|
* highlighting the total sector size for entries with collisions. */
|
|
static const FDFormat fd_formats[] = {
|
|
/* First entry is default format */
|
|
/* 1.44 MB 3"1/2 floppy disks */
|
|
{ FLOPPY_DRIVE_TYPE_144, 18, 80, 1, FDRIVE_RATE_500K, }, /* 3.5" 2880 */
|
|
{ FLOPPY_DRIVE_TYPE_144, 20, 80, 1, FDRIVE_RATE_500K, }, /* 3.5" 3200 */
|
|
{ FLOPPY_DRIVE_TYPE_144, 21, 80, 1, FDRIVE_RATE_500K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 21, 82, 1, FDRIVE_RATE_500K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 21, 83, 1, FDRIVE_RATE_500K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 22, 80, 1, FDRIVE_RATE_500K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 23, 80, 1, FDRIVE_RATE_500K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 24, 80, 1, FDRIVE_RATE_500K, },
|
|
/* 2.88 MB 3"1/2 floppy disks */
|
|
{ FLOPPY_DRIVE_TYPE_288, 36, 80, 1, FDRIVE_RATE_1M, },
|
|
{ FLOPPY_DRIVE_TYPE_288, 39, 80, 1, FDRIVE_RATE_1M, },
|
|
{ FLOPPY_DRIVE_TYPE_288, 40, 80, 1, FDRIVE_RATE_1M, },
|
|
{ FLOPPY_DRIVE_TYPE_288, 44, 80, 1, FDRIVE_RATE_1M, },
|
|
{ FLOPPY_DRIVE_TYPE_288, 48, 80, 1, FDRIVE_RATE_1M, },
|
|
/* 720 kB 3"1/2 floppy disks */
|
|
{ FLOPPY_DRIVE_TYPE_144, 9, 80, 1, FDRIVE_RATE_250K, }, /* 3.5" 1440 */
|
|
{ FLOPPY_DRIVE_TYPE_144, 10, 80, 1, FDRIVE_RATE_250K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 10, 82, 1, FDRIVE_RATE_250K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 10, 83, 1, FDRIVE_RATE_250K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 13, 80, 1, FDRIVE_RATE_250K, },
|
|
{ FLOPPY_DRIVE_TYPE_144, 14, 80, 1, FDRIVE_RATE_250K, },
|
|
/* 1.2 MB 5"1/4 floppy disks */
|
|
{ FLOPPY_DRIVE_TYPE_120, 15, 80, 1, FDRIVE_RATE_500K, },
|
|
{ FLOPPY_DRIVE_TYPE_120, 18, 80, 1, FDRIVE_RATE_500K, }, /* 5.25" 2880 */
|
|
{ FLOPPY_DRIVE_TYPE_120, 18, 82, 1, FDRIVE_RATE_500K, },
|
|
{ FLOPPY_DRIVE_TYPE_120, 18, 83, 1, FDRIVE_RATE_500K, },
|
|
{ FLOPPY_DRIVE_TYPE_120, 20, 80, 1, FDRIVE_RATE_500K, }, /* 5.25" 3200 */
|
|
/* 720 kB 5"1/4 floppy disks */
|
|
{ FLOPPY_DRIVE_TYPE_120, 9, 80, 1, FDRIVE_RATE_250K, }, /* 5.25" 1440 */
|
|
{ FLOPPY_DRIVE_TYPE_120, 11, 80, 1, FDRIVE_RATE_250K, },
|
|
/* 360 kB 5"1/4 floppy disks */
|
|
{ FLOPPY_DRIVE_TYPE_120, 9, 40, 1, FDRIVE_RATE_300K, }, /* 5.25" 720 */
|
|
{ FLOPPY_DRIVE_TYPE_120, 9, 40, 0, FDRIVE_RATE_300K, },
|
|
{ FLOPPY_DRIVE_TYPE_120, 10, 41, 1, FDRIVE_RATE_300K, },
|
|
{ FLOPPY_DRIVE_TYPE_120, 10, 42, 1, FDRIVE_RATE_300K, },
|
|
/* 320 kB 5"1/4 floppy disks */
|
|
{ FLOPPY_DRIVE_TYPE_120, 8, 40, 1, FDRIVE_RATE_250K, },
|
|
{ FLOPPY_DRIVE_TYPE_120, 8, 40, 0, FDRIVE_RATE_250K, },
|
|
/* 360 kB must match 5"1/4 better than 3"1/2... */
|
|
{ FLOPPY_DRIVE_TYPE_144, 9, 80, 0, FDRIVE_RATE_250K, }, /* 3.5" 720 */
|
|
/* end */
|
|
{ FLOPPY_DRIVE_TYPE_NONE, -1, -1, 0, 0, },
|
|
};
|
|
|
|
static FDriveSize drive_size(FloppyDriveType drive)
|
|
{
|
|
switch (drive) {
|
|
case FLOPPY_DRIVE_TYPE_120:
|
|
return FDRIVE_SIZE_525;
|
|
case FLOPPY_DRIVE_TYPE_144:
|
|
case FLOPPY_DRIVE_TYPE_288:
|
|
return FDRIVE_SIZE_350;
|
|
default:
|
|
return FDRIVE_SIZE_UNKNOWN;
|
|
}
|
|
}
|
|
|
|
#define GET_CUR_DRV(fdctrl) ((fdctrl)->cur_drv)
|
|
#define SET_CUR_DRV(fdctrl, drive) ((fdctrl)->cur_drv = (drive))
|
|
|
|
/* Will always be a fixed parameter for us */
|
|
#define FD_SECTOR_LEN 512
|
|
#define FD_SECTOR_SC 2 /* Sector size code */
|
|
#define FD_RESET_SENSEI_COUNT 4 /* Number of sense interrupts on RESET */
|
|
|
|
/* Floppy disk drive emulation */
|
|
typedef enum FDiskFlags {
|
|
FDISK_DBL_SIDES = 0x01,
|
|
} FDiskFlags;
|
|
|
|
struct FDrive {
|
|
FDCtrl *fdctrl;
|
|
BlockBackend *blk;
|
|
BlockConf *conf;
|
|
/* Drive status */
|
|
FloppyDriveType drive; /* CMOS drive type */
|
|
uint8_t perpendicular; /* 2.88 MB access mode */
|
|
/* Position */
|
|
uint8_t head;
|
|
uint8_t track;
|
|
uint8_t sect;
|
|
/* Media */
|
|
FloppyDriveType disk; /* Current disk type */
|
|
FDiskFlags flags;
|
|
uint8_t last_sect; /* Nb sector per track */
|
|
uint8_t max_track; /* Nb of tracks */
|
|
uint16_t bps; /* Bytes per sector */
|
|
uint8_t ro; /* Is read-only */
|
|
uint8_t media_changed; /* Is media changed */
|
|
uint8_t media_rate; /* Data rate of medium */
|
|
|
|
bool media_validated; /* Have we validated the media? */
|
|
};
|
|
|
|
|
|
static FloppyDriveType get_fallback_drive_type(FDrive *drv);
|
|
|
|
/* Hack: FD_SEEK is expected to work on empty drives. However, QEMU
|
|
* currently goes through some pains to keep seeks within the bounds
|
|
* established by last_sect and max_track. Correcting this is difficult,
|
|
* as refactoring FDC code tends to expose nasty bugs in the Linux kernel.
|
|
*
|
|
* For now: allow empty drives to have large bounds so we can seek around,
|
|
* with the understanding that when a diskette is inserted, the bounds will
|
|
* properly tighten to match the geometry of that inserted medium.
|
|
*/
|
|
static void fd_empty_seek_hack(FDrive *drv)
|
|
{
|
|
drv->last_sect = 0xFF;
|
|
drv->max_track = 0xFF;
|
|
}
|
|
|
|
static void fd_init(FDrive *drv)
|
|
{
|
|
/* Drive */
|
|
drv->perpendicular = 0;
|
|
/* Disk */
|
|
drv->disk = FLOPPY_DRIVE_TYPE_NONE;
|
|
drv->last_sect = 0;
|
|
drv->max_track = 0;
|
|
drv->ro = true;
|
|
drv->media_changed = 1;
|
|
}
|
|
|
|
#define NUM_SIDES(drv) ((drv)->flags & FDISK_DBL_SIDES ? 2 : 1)
|
|
|
|
static int fd_sector_calc(uint8_t head, uint8_t track, uint8_t sect,
|
|
uint8_t last_sect, uint8_t num_sides)
|
|
{
|
|
return (((track * num_sides) + head) * last_sect) + sect - 1;
|
|
}
|
|
|
|
/* Returns current position, in sectors, for given drive */
|
|
static int fd_sector(FDrive *drv)
|
|
{
|
|
return fd_sector_calc(drv->head, drv->track, drv->sect, drv->last_sect,
|
|
NUM_SIDES(drv));
|
|
}
|
|
|
|
/* Returns current position, in bytes, for given drive */
|
|
static int fd_offset(FDrive *drv)
|
|
{
|
|
g_assert(fd_sector(drv) < INT_MAX >> BDRV_SECTOR_BITS);
|
|
return fd_sector(drv) << BDRV_SECTOR_BITS;
|
|
}
|
|
|
|
/* Seek to a new position:
|
|
* returns 0 if already on right track
|
|
* returns 1 if track changed
|
|
* returns 2 if track is invalid
|
|
* returns 3 if sector is invalid
|
|
* returns 4 if seek is disabled
|
|
*/
|
|
static int fd_seek(FDrive *drv, uint8_t head, uint8_t track, uint8_t sect,
|
|
int enable_seek)
|
|
{
|
|
uint32_t sector;
|
|
int ret;
|
|
|
|
if (track > drv->max_track ||
|
|
(head != 0 && (drv->flags & FDISK_DBL_SIDES) == 0)) {
|
|
FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n",
|
|
head, track, sect, 1,
|
|
(drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1,
|
|
drv->max_track, drv->last_sect);
|
|
return 2;
|
|
}
|
|
if (sect > drv->last_sect) {
|
|
FLOPPY_DPRINTF("try to read %d %02x %02x (max=%d %d %02x %02x)\n",
|
|
head, track, sect, 1,
|
|
(drv->flags & FDISK_DBL_SIDES) == 0 ? 0 : 1,
|
|
drv->max_track, drv->last_sect);
|
|
return 3;
|
|
}
|
|
sector = fd_sector_calc(head, track, sect, drv->last_sect, NUM_SIDES(drv));
|
|
ret = 0;
|
|
if (sector != fd_sector(drv)) {
|
|
#if 0
|
|
if (!enable_seek) {
|
|
FLOPPY_DPRINTF("error: no implicit seek %d %02x %02x"
|
|
" (max=%d %02x %02x)\n",
|
|
head, track, sect, 1, drv->max_track,
|
|
drv->last_sect);
|
|
return 4;
|
|
}
|
|
#endif
|
|
drv->head = head;
|
|
if (drv->track != track) {
|
|
if (drv->blk != NULL && blk_is_inserted(drv->blk)) {
|
|
drv->media_changed = 0;
|
|
}
|
|
ret = 1;
|
|
}
|
|
drv->track = track;
|
|
drv->sect = sect;
|
|
}
|
|
|
|
if (drv->blk == NULL || !blk_is_inserted(drv->blk)) {
|
|
ret = 2;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Set drive back to track 0 */
|
|
static void fd_recalibrate(FDrive *drv)
|
|
{
|
|
FLOPPY_DPRINTF("recalibrate\n");
|
|
fd_seek(drv, 0, 0, 1, 1);
|
|
}
|
|
|
|
/**
|
|
* Determine geometry based on inserted diskette.
|
|
* Will not operate on an empty drive.
|
|
*
|
|
* @return: 0 on success, -1 if the drive is empty.
|
|
*/
|
|
static int pick_geometry(FDrive *drv)
|
|
{
|
|
BlockBackend *blk = drv->blk;
|
|
const FDFormat *parse;
|
|
uint64_t nb_sectors, size;
|
|
int i;
|
|
int match, size_match, type_match;
|
|
bool magic = drv->drive == FLOPPY_DRIVE_TYPE_AUTO;
|
|
|
|
/* We can only pick a geometry if we have a diskette. */
|
|
if (!drv->blk || !blk_is_inserted(drv->blk) ||
|
|
drv->drive == FLOPPY_DRIVE_TYPE_NONE)
|
|
{
|
|
return -1;
|
|
}
|
|
|
|
/* We need to determine the likely geometry of the inserted medium.
|
|
* In order of preference, we look for:
|
|
* (1) The same drive type and number of sectors,
|
|
* (2) The same diskette size and number of sectors,
|
|
* (3) The same drive type.
|
|
*
|
|
* In all cases, matches that occur higher in the drive table will take
|
|
* precedence over matches that occur later in the table.
|
|
*/
|
|
blk_get_geometry(blk, &nb_sectors);
|
|
match = size_match = type_match = -1;
|
|
for (i = 0; ; i++) {
|
|
parse = &fd_formats[i];
|
|
if (parse->drive == FLOPPY_DRIVE_TYPE_NONE) {
|
|
break;
|
|
}
|
|
size = (parse->max_head + 1) * parse->max_track * parse->last_sect;
|
|
if (nb_sectors == size) {
|
|
if (magic || parse->drive == drv->drive) {
|
|
/* (1) perfect match -- nb_sectors and drive type */
|
|
goto out;
|
|
} else if (drive_size(parse->drive) == drive_size(drv->drive)) {
|
|
/* (2) size match -- nb_sectors and physical medium size */
|
|
match = (match == -1) ? i : match;
|
|
} else {
|
|
/* This is suspicious -- Did the user misconfigure? */
|
|
size_match = (size_match == -1) ? i : size_match;
|
|
}
|
|
} else if (type_match == -1) {
|
|
if ((parse->drive == drv->drive) ||
|
|
(magic && (parse->drive == get_fallback_drive_type(drv)))) {
|
|
/* (3) type match -- nb_sectors mismatch, but matches the type
|
|
* specified explicitly by the user, or matches the fallback
|
|
* default type when using the drive autodetect mechanism */
|
|
type_match = i;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* No exact match found */
|
|
if (match == -1) {
|
|
if (size_match != -1) {
|
|
parse = &fd_formats[size_match];
|
|
FLOPPY_DPRINTF("User requested floppy drive type '%s', "
|
|
"but inserted medium appears to be a "
|
|
"%"PRId64" sector '%s' type\n",
|
|
FloppyDriveType_str(drv->drive),
|
|
nb_sectors,
|
|
FloppyDriveType_str(parse->drive));
|
|
}
|
|
assert(type_match != -1 && "misconfigured fd_format");
|
|
match = type_match;
|
|
}
|
|
parse = &(fd_formats[match]);
|
|
|
|
out:
|
|
if (parse->max_head == 0) {
|
|
drv->flags &= ~FDISK_DBL_SIDES;
|
|
} else {
|
|
drv->flags |= FDISK_DBL_SIDES;
|
|
}
|
|
drv->max_track = parse->max_track;
|
|
drv->last_sect = parse->last_sect;
|
|
drv->disk = parse->drive;
|
|
drv->media_rate = parse->rate;
|
|
return 0;
|
|
}
|
|
|
|
static void pick_drive_type(FDrive *drv)
|
|
{
|
|
if (drv->drive != FLOPPY_DRIVE_TYPE_AUTO) {
|
|
return;
|
|
}
|
|
|
|
if (pick_geometry(drv) == 0) {
|
|
drv->drive = drv->disk;
|
|
} else {
|
|
drv->drive = get_fallback_drive_type(drv);
|
|
}
|
|
|
|
g_assert(drv->drive != FLOPPY_DRIVE_TYPE_AUTO);
|
|
}
|
|
|
|
/* Revalidate a disk drive after a disk change */
|
|
static void fd_revalidate(FDrive *drv)
|
|
{
|
|
int rc;
|
|
|
|
FLOPPY_DPRINTF("revalidate\n");
|
|
if (drv->blk != NULL) {
|
|
drv->ro = !blk_is_writable(drv->blk);
|
|
if (!blk_is_inserted(drv->blk)) {
|
|
FLOPPY_DPRINTF("No disk in drive\n");
|
|
drv->disk = FLOPPY_DRIVE_TYPE_NONE;
|
|
fd_empty_seek_hack(drv);
|
|
} else if (!drv->media_validated) {
|
|
rc = pick_geometry(drv);
|
|
if (rc) {
|
|
FLOPPY_DPRINTF("Could not validate floppy drive media");
|
|
} else {
|
|
drv->media_validated = true;
|
|
FLOPPY_DPRINTF("Floppy disk (%d h %d t %d s) %s\n",
|
|
(drv->flags & FDISK_DBL_SIDES) ? 2 : 1,
|
|
drv->max_track, drv->last_sect,
|
|
drv->ro ? "ro" : "rw");
|
|
}
|
|
}
|
|
} else {
|
|
FLOPPY_DPRINTF("No drive connected\n");
|
|
drv->last_sect = 0;
|
|
drv->max_track = 0;
|
|
drv->flags &= ~FDISK_DBL_SIDES;
|
|
drv->drive = FLOPPY_DRIVE_TYPE_NONE;
|
|
drv->disk = FLOPPY_DRIVE_TYPE_NONE;
|
|
}
|
|
}
|
|
|
|
static void fd_change_cb(void *opaque, bool load, Error **errp)
|
|
{
|
|
FDrive *drive = opaque;
|
|
|
|
if (!load) {
|
|
blk_set_perm(drive->blk, 0, BLK_PERM_ALL, &error_abort);
|
|
} else {
|
|
if (!blkconf_apply_backend_options(drive->conf,
|
|
!blk_supports_write_perm(drive->blk),
|
|
false, errp)) {
|
|
return;
|
|
}
|
|
}
|
|
|
|
drive->media_changed = 1;
|
|
drive->media_validated = false;
|
|
fd_revalidate(drive);
|
|
}
|
|
|
|
static const BlockDevOps fd_block_ops = {
|
|
.change_media_cb = fd_change_cb,
|
|
};
|
|
|
|
|
|
#define TYPE_FLOPPY_DRIVE "floppy"
|
|
OBJECT_DECLARE_SIMPLE_TYPE(FloppyDrive, FLOPPY_DRIVE)
|
|
|
|
struct FloppyDrive {
|
|
DeviceState qdev;
|
|
uint32_t unit;
|
|
BlockConf conf;
|
|
FloppyDriveType type;
|
|
};
|
|
|
|
static Property floppy_drive_properties[] = {
|
|
DEFINE_PROP_UINT32("unit", FloppyDrive, unit, -1),
|
|
DEFINE_BLOCK_PROPERTIES(FloppyDrive, conf),
|
|
DEFINE_PROP_SIGNED("drive-type", FloppyDrive, type,
|
|
FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void floppy_drive_realize(DeviceState *qdev, Error **errp)
|
|
{
|
|
FloppyDrive *dev = FLOPPY_DRIVE(qdev);
|
|
FloppyBus *bus = FLOPPY_BUS(qdev->parent_bus);
|
|
FDrive *drive;
|
|
bool read_only;
|
|
int ret;
|
|
|
|
if (dev->unit == -1) {
|
|
for (dev->unit = 0; dev->unit < MAX_FD; dev->unit++) {
|
|
drive = get_drv(bus->fdc, dev->unit);
|
|
if (!drive->blk) {
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (dev->unit >= MAX_FD) {
|
|
error_setg(errp, "Can't create floppy unit %d, bus supports "
|
|
"only %d units", dev->unit, MAX_FD);
|
|
return;
|
|
}
|
|
|
|
drive = get_drv(bus->fdc, dev->unit);
|
|
if (drive->blk) {
|
|
error_setg(errp, "Floppy unit %d is in use", dev->unit);
|
|
return;
|
|
}
|
|
|
|
if (!dev->conf.blk) {
|
|
/* Anonymous BlockBackend for an empty drive */
|
|
dev->conf.blk = blk_new(qemu_get_aio_context(), 0, BLK_PERM_ALL);
|
|
ret = blk_attach_dev(dev->conf.blk, qdev);
|
|
assert(ret == 0);
|
|
|
|
/* Don't take write permissions on an empty drive to allow attaching a
|
|
* read-only node later */
|
|
read_only = true;
|
|
} else {
|
|
read_only = !blk_bs(dev->conf.blk) ||
|
|
!blk_supports_write_perm(dev->conf.blk);
|
|
}
|
|
|
|
if (!blkconf_blocksizes(&dev->conf, errp)) {
|
|
return;
|
|
}
|
|
|
|
if (dev->conf.logical_block_size != 512 ||
|
|
dev->conf.physical_block_size != 512)
|
|
{
|
|
error_setg(errp, "Physical and logical block size must "
|
|
"be 512 for floppy");
|
|
return;
|
|
}
|
|
|
|
/* rerror/werror aren't supported by fdc and therefore not even registered
|
|
* with qdev. So set the defaults manually before they are used in
|
|
* blkconf_apply_backend_options(). */
|
|
dev->conf.rerror = BLOCKDEV_ON_ERROR_AUTO;
|
|
dev->conf.werror = BLOCKDEV_ON_ERROR_AUTO;
|
|
|
|
if (!blkconf_apply_backend_options(&dev->conf, read_only, false, errp)) {
|
|
return;
|
|
}
|
|
|
|
/* 'enospc' is the default for -drive, 'report' is what blk_new() gives us
|
|
* for empty drives. */
|
|
if (blk_get_on_error(dev->conf.blk, 0) != BLOCKDEV_ON_ERROR_ENOSPC &&
|
|
blk_get_on_error(dev->conf.blk, 0) != BLOCKDEV_ON_ERROR_REPORT) {
|
|
error_setg(errp, "fdc doesn't support drive option werror");
|
|
return;
|
|
}
|
|
if (blk_get_on_error(dev->conf.blk, 1) != BLOCKDEV_ON_ERROR_REPORT) {
|
|
error_setg(errp, "fdc doesn't support drive option rerror");
|
|
return;
|
|
}
|
|
|
|
drive->conf = &dev->conf;
|
|
drive->blk = dev->conf.blk;
|
|
drive->fdctrl = bus->fdc;
|
|
|
|
fd_init(drive);
|
|
blk_set_dev_ops(drive->blk, &fd_block_ops, drive);
|
|
|
|
/* Keep 'type' qdev property and FDrive->drive in sync */
|
|
drive->drive = dev->type;
|
|
pick_drive_type(drive);
|
|
dev->type = drive->drive;
|
|
|
|
fd_revalidate(drive);
|
|
}
|
|
|
|
static void floppy_drive_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *k = DEVICE_CLASS(klass);
|
|
k->realize = floppy_drive_realize;
|
|
set_bit(DEVICE_CATEGORY_STORAGE, k->categories);
|
|
k->bus_type = TYPE_FLOPPY_BUS;
|
|
device_class_set_props(k, floppy_drive_properties);
|
|
k->desc = "virtual floppy drive";
|
|
}
|
|
|
|
static const TypeInfo floppy_drive_info = {
|
|
.name = TYPE_FLOPPY_DRIVE,
|
|
.parent = TYPE_DEVICE,
|
|
.instance_size = sizeof(FloppyDrive),
|
|
.class_init = floppy_drive_class_init,
|
|
};
|
|
|
|
/********************************************************/
|
|
/* Intel 82078 floppy disk controller emulation */
|
|
|
|
static void fdctrl_reset(FDCtrl *fdctrl, int do_irq);
|
|
static void fdctrl_to_command_phase(FDCtrl *fdctrl);
|
|
static int fdctrl_transfer_handler (void *opaque, int nchan,
|
|
int dma_pos, int dma_len);
|
|
static void fdctrl_raise_irq(FDCtrl *fdctrl);
|
|
static FDrive *get_cur_drv(FDCtrl *fdctrl);
|
|
|
|
static uint32_t fdctrl_read_statusA(FDCtrl *fdctrl);
|
|
static uint32_t fdctrl_read_statusB(FDCtrl *fdctrl);
|
|
static uint32_t fdctrl_read_dor(FDCtrl *fdctrl);
|
|
static void fdctrl_write_dor(FDCtrl *fdctrl, uint32_t value);
|
|
static uint32_t fdctrl_read_tape(FDCtrl *fdctrl);
|
|
static void fdctrl_write_tape(FDCtrl *fdctrl, uint32_t value);
|
|
static uint32_t fdctrl_read_main_status(FDCtrl *fdctrl);
|
|
static void fdctrl_write_rate(FDCtrl *fdctrl, uint32_t value);
|
|
static uint32_t fdctrl_read_data(FDCtrl *fdctrl);
|
|
static void fdctrl_write_data(FDCtrl *fdctrl, uint32_t value);
|
|
static uint32_t fdctrl_read_dir(FDCtrl *fdctrl);
|
|
static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value);
|
|
|
|
enum {
|
|
FD_DIR_WRITE = 0,
|
|
FD_DIR_READ = 1,
|
|
FD_DIR_SCANE = 2,
|
|
FD_DIR_SCANL = 3,
|
|
FD_DIR_SCANH = 4,
|
|
FD_DIR_VERIFY = 5,
|
|
};
|
|
|
|
enum {
|
|
FD_STATE_MULTI = 0x01, /* multi track flag */
|
|
FD_STATE_FORMAT = 0x02, /* format flag */
|
|
};
|
|
|
|
enum {
|
|
FD_REG_SRA = 0x00,
|
|
FD_REG_SRB = 0x01,
|
|
FD_REG_DOR = 0x02,
|
|
FD_REG_TDR = 0x03,
|
|
FD_REG_MSR = 0x04,
|
|
FD_REG_DSR = 0x04,
|
|
FD_REG_FIFO = 0x05,
|
|
FD_REG_DIR = 0x07,
|
|
FD_REG_CCR = 0x07,
|
|
};
|
|
|
|
enum {
|
|
FD_CMD_READ_TRACK = 0x02,
|
|
FD_CMD_SPECIFY = 0x03,
|
|
FD_CMD_SENSE_DRIVE_STATUS = 0x04,
|
|
FD_CMD_WRITE = 0x05,
|
|
FD_CMD_READ = 0x06,
|
|
FD_CMD_RECALIBRATE = 0x07,
|
|
FD_CMD_SENSE_INTERRUPT_STATUS = 0x08,
|
|
FD_CMD_WRITE_DELETED = 0x09,
|
|
FD_CMD_READ_ID = 0x0a,
|
|
FD_CMD_READ_DELETED = 0x0c,
|
|
FD_CMD_FORMAT_TRACK = 0x0d,
|
|
FD_CMD_DUMPREG = 0x0e,
|
|
FD_CMD_SEEK = 0x0f,
|
|
FD_CMD_VERSION = 0x10,
|
|
FD_CMD_SCAN_EQUAL = 0x11,
|
|
FD_CMD_PERPENDICULAR_MODE = 0x12,
|
|
FD_CMD_CONFIGURE = 0x13,
|
|
FD_CMD_LOCK = 0x14,
|
|
FD_CMD_VERIFY = 0x16,
|
|
FD_CMD_POWERDOWN_MODE = 0x17,
|
|
FD_CMD_PART_ID = 0x18,
|
|
FD_CMD_SCAN_LOW_OR_EQUAL = 0x19,
|
|
FD_CMD_SCAN_HIGH_OR_EQUAL = 0x1d,
|
|
FD_CMD_SAVE = 0x2e,
|
|
FD_CMD_OPTION = 0x33,
|
|
FD_CMD_RESTORE = 0x4e,
|
|
FD_CMD_DRIVE_SPECIFICATION_COMMAND = 0x8e,
|
|
FD_CMD_RELATIVE_SEEK_OUT = 0x8f,
|
|
FD_CMD_FORMAT_AND_WRITE = 0xcd,
|
|
FD_CMD_RELATIVE_SEEK_IN = 0xcf,
|
|
};
|
|
|
|
enum {
|
|
FD_CONFIG_PRETRK = 0xff, /* Pre-compensation set to track 0 */
|
|
FD_CONFIG_FIFOTHR = 0x0f, /* FIFO threshold set to 1 byte */
|
|
FD_CONFIG_POLL = 0x10, /* Poll enabled */
|
|
FD_CONFIG_EFIFO = 0x20, /* FIFO disabled */
|
|
FD_CONFIG_EIS = 0x40, /* No implied seeks */
|
|
};
|
|
|
|
enum {
|
|
FD_SR0_DS0 = 0x01,
|
|
FD_SR0_DS1 = 0x02,
|
|
FD_SR0_HEAD = 0x04,
|
|
FD_SR0_EQPMT = 0x10,
|
|
FD_SR0_SEEK = 0x20,
|
|
FD_SR0_ABNTERM = 0x40,
|
|
FD_SR0_INVCMD = 0x80,
|
|
FD_SR0_RDYCHG = 0xc0,
|
|
};
|
|
|
|
enum {
|
|
FD_SR1_MA = 0x01, /* Missing address mark */
|
|
FD_SR1_NW = 0x02, /* Not writable */
|
|
FD_SR1_EC = 0x80, /* End of cylinder */
|
|
};
|
|
|
|
enum {
|
|
FD_SR2_SNS = 0x04, /* Scan not satisfied */
|
|
FD_SR2_SEH = 0x08, /* Scan equal hit */
|
|
};
|
|
|
|
enum {
|
|
FD_SRA_DIR = 0x01,
|
|
FD_SRA_nWP = 0x02,
|
|
FD_SRA_nINDX = 0x04,
|
|
FD_SRA_HDSEL = 0x08,
|
|
FD_SRA_nTRK0 = 0x10,
|
|
FD_SRA_STEP = 0x20,
|
|
FD_SRA_nDRV2 = 0x40,
|
|
FD_SRA_INTPEND = 0x80,
|
|
};
|
|
|
|
enum {
|
|
FD_SRB_MTR0 = 0x01,
|
|
FD_SRB_MTR1 = 0x02,
|
|
FD_SRB_WGATE = 0x04,
|
|
FD_SRB_RDATA = 0x08,
|
|
FD_SRB_WDATA = 0x10,
|
|
FD_SRB_DR0 = 0x20,
|
|
};
|
|
|
|
enum {
|
|
#if MAX_FD == 4
|
|
FD_DOR_SELMASK = 0x03,
|
|
#else
|
|
FD_DOR_SELMASK = 0x01,
|
|
#endif
|
|
FD_DOR_nRESET = 0x04,
|
|
FD_DOR_DMAEN = 0x08,
|
|
FD_DOR_MOTEN0 = 0x10,
|
|
FD_DOR_MOTEN1 = 0x20,
|
|
FD_DOR_MOTEN2 = 0x40,
|
|
FD_DOR_MOTEN3 = 0x80,
|
|
};
|
|
|
|
enum {
|
|
#if MAX_FD == 4
|
|
FD_TDR_BOOTSEL = 0x0c,
|
|
#else
|
|
FD_TDR_BOOTSEL = 0x04,
|
|
#endif
|
|
};
|
|
|
|
enum {
|
|
FD_DSR_DRATEMASK= 0x03,
|
|
FD_DSR_PWRDOWN = 0x40,
|
|
FD_DSR_SWRESET = 0x80,
|
|
};
|
|
|
|
enum {
|
|
FD_MSR_DRV0BUSY = 0x01,
|
|
FD_MSR_DRV1BUSY = 0x02,
|
|
FD_MSR_DRV2BUSY = 0x04,
|
|
FD_MSR_DRV3BUSY = 0x08,
|
|
FD_MSR_CMDBUSY = 0x10,
|
|
FD_MSR_NONDMA = 0x20,
|
|
FD_MSR_DIO = 0x40,
|
|
FD_MSR_RQM = 0x80,
|
|
};
|
|
|
|
enum {
|
|
FD_DIR_DSKCHG = 0x80,
|
|
};
|
|
|
|
/*
|
|
* See chapter 5.0 "Controller phases" of the spec:
|
|
*
|
|
* Command phase:
|
|
* The host writes a command and its parameters into the FIFO. The command
|
|
* phase is completed when all parameters for the command have been supplied,
|
|
* and execution phase is entered.
|
|
*
|
|
* Execution phase:
|
|
* Data transfers, either DMA or non-DMA. For non-DMA transfers, the FIFO
|
|
* contains the payload now, otherwise it's unused. When all bytes of the
|
|
* required data have been transferred, the state is switched to either result
|
|
* phase (if the command produces status bytes) or directly back into the
|
|
* command phase for the next command.
|
|
*
|
|
* Result phase:
|
|
* The host reads out the FIFO, which contains one or more result bytes now.
|
|
*/
|
|
enum {
|
|
/* Only for migration: reconstruct phase from registers like qemu 2.3 */
|
|
FD_PHASE_RECONSTRUCT = 0,
|
|
|
|
FD_PHASE_COMMAND = 1,
|
|
FD_PHASE_EXECUTION = 2,
|
|
FD_PHASE_RESULT = 3,
|
|
};
|
|
|
|
#define FD_MULTI_TRACK(state) ((state) & FD_STATE_MULTI)
|
|
#define FD_FORMAT_CMD(state) ((state) & FD_STATE_FORMAT)
|
|
|
|
struct FDCtrl {
|
|
MemoryRegion iomem;
|
|
qemu_irq irq;
|
|
/* Controller state */
|
|
QEMUTimer *result_timer;
|
|
int dma_chann;
|
|
uint8_t phase;
|
|
IsaDma *dma;
|
|
/* Controller's identification */
|
|
uint8_t version;
|
|
/* HW */
|
|
uint8_t sra;
|
|
uint8_t srb;
|
|
uint8_t dor;
|
|
uint8_t dor_vmstate; /* only used as temp during vmstate */
|
|
uint8_t tdr;
|
|
uint8_t dsr;
|
|
uint8_t msr;
|
|
uint8_t cur_drv;
|
|
uint8_t status0;
|
|
uint8_t status1;
|
|
uint8_t status2;
|
|
/* Command FIFO */
|
|
uint8_t *fifo;
|
|
int32_t fifo_size;
|
|
uint32_t data_pos;
|
|
uint32_t data_len;
|
|
uint8_t data_state;
|
|
uint8_t data_dir;
|
|
uint8_t eot; /* last wanted sector */
|
|
/* States kept only to be returned back */
|
|
/* precompensation */
|
|
uint8_t precomp_trk;
|
|
uint8_t config;
|
|
uint8_t lock;
|
|
/* Power down config (also with status regB access mode */
|
|
uint8_t pwrd;
|
|
/* Floppy drives */
|
|
FloppyBus bus;
|
|
uint8_t num_floppies;
|
|
FDrive drives[MAX_FD];
|
|
struct {
|
|
FloppyDriveType type;
|
|
} qdev_for_drives[MAX_FD];
|
|
int reset_sensei;
|
|
FloppyDriveType fallback; /* type=auto failure fallback */
|
|
/* Timers state */
|
|
uint8_t timer0;
|
|
uint8_t timer1;
|
|
PortioList portio_list;
|
|
};
|
|
|
|
static FloppyDriveType get_fallback_drive_type(FDrive *drv)
|
|
{
|
|
return drv->fdctrl->fallback;
|
|
}
|
|
|
|
#define TYPE_SYSBUS_FDC "base-sysbus-fdc"
|
|
OBJECT_DECLARE_SIMPLE_TYPE(FDCtrlSysBus, SYSBUS_FDC)
|
|
|
|
struct FDCtrlSysBus {
|
|
/*< private >*/
|
|
SysBusDevice parent_obj;
|
|
/*< public >*/
|
|
|
|
struct FDCtrl state;
|
|
};
|
|
|
|
OBJECT_DECLARE_SIMPLE_TYPE(FDCtrlISABus, ISA_FDC)
|
|
|
|
struct FDCtrlISABus {
|
|
ISADevice parent_obj;
|
|
|
|
uint32_t iobase;
|
|
uint32_t irq;
|
|
uint32_t dma;
|
|
struct FDCtrl state;
|
|
int32_t bootindexA;
|
|
int32_t bootindexB;
|
|
};
|
|
|
|
static uint32_t fdctrl_read (void *opaque, uint32_t reg)
|
|
{
|
|
FDCtrl *fdctrl = opaque;
|
|
uint32_t retval;
|
|
|
|
reg &= 7;
|
|
switch (reg) {
|
|
case FD_REG_SRA:
|
|
retval = fdctrl_read_statusA(fdctrl);
|
|
break;
|
|
case FD_REG_SRB:
|
|
retval = fdctrl_read_statusB(fdctrl);
|
|
break;
|
|
case FD_REG_DOR:
|
|
retval = fdctrl_read_dor(fdctrl);
|
|
break;
|
|
case FD_REG_TDR:
|
|
retval = fdctrl_read_tape(fdctrl);
|
|
break;
|
|
case FD_REG_MSR:
|
|
retval = fdctrl_read_main_status(fdctrl);
|
|
break;
|
|
case FD_REG_FIFO:
|
|
retval = fdctrl_read_data(fdctrl);
|
|
break;
|
|
case FD_REG_DIR:
|
|
retval = fdctrl_read_dir(fdctrl);
|
|
break;
|
|
default:
|
|
retval = (uint32_t)(-1);
|
|
break;
|
|
}
|
|
trace_fdc_ioport_read(reg, retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void fdctrl_write (void *opaque, uint32_t reg, uint32_t value)
|
|
{
|
|
FDCtrl *fdctrl = opaque;
|
|
|
|
reg &= 7;
|
|
trace_fdc_ioport_write(reg, value);
|
|
switch (reg) {
|
|
case FD_REG_DOR:
|
|
fdctrl_write_dor(fdctrl, value);
|
|
break;
|
|
case FD_REG_TDR:
|
|
fdctrl_write_tape(fdctrl, value);
|
|
break;
|
|
case FD_REG_DSR:
|
|
fdctrl_write_rate(fdctrl, value);
|
|
break;
|
|
case FD_REG_FIFO:
|
|
fdctrl_write_data(fdctrl, value);
|
|
break;
|
|
case FD_REG_CCR:
|
|
fdctrl_write_ccr(fdctrl, value);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static uint64_t fdctrl_read_mem (void *opaque, hwaddr reg,
|
|
unsigned ize)
|
|
{
|
|
return fdctrl_read(opaque, (uint32_t)reg);
|
|
}
|
|
|
|
static void fdctrl_write_mem (void *opaque, hwaddr reg,
|
|
uint64_t value, unsigned size)
|
|
{
|
|
fdctrl_write(opaque, (uint32_t)reg, value);
|
|
}
|
|
|
|
static const MemoryRegionOps fdctrl_mem_ops = {
|
|
.read = fdctrl_read_mem,
|
|
.write = fdctrl_write_mem,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
};
|
|
|
|
static const MemoryRegionOps fdctrl_mem_strict_ops = {
|
|
.read = fdctrl_read_mem,
|
|
.write = fdctrl_write_mem,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.valid = {
|
|
.min_access_size = 1,
|
|
.max_access_size = 1,
|
|
},
|
|
};
|
|
|
|
static bool fdrive_media_changed_needed(void *opaque)
|
|
{
|
|
FDrive *drive = opaque;
|
|
|
|
return (drive->blk != NULL && drive->media_changed != 1);
|
|
}
|
|
|
|
static const VMStateDescription vmstate_fdrive_media_changed = {
|
|
.name = "fdrive/media_changed",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.needed = fdrive_media_changed_needed,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT8(media_changed, FDrive),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static const VMStateDescription vmstate_fdrive_media_rate = {
|
|
.name = "fdrive/media_rate",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT8(media_rate, FDrive),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static bool fdrive_perpendicular_needed(void *opaque)
|
|
{
|
|
FDrive *drive = opaque;
|
|
|
|
return drive->perpendicular != 0;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_fdrive_perpendicular = {
|
|
.name = "fdrive/perpendicular",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.needed = fdrive_perpendicular_needed,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT8(perpendicular, FDrive),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static int fdrive_post_load(void *opaque, int version_id)
|
|
{
|
|
fd_revalidate(opaque);
|
|
return 0;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_fdrive = {
|
|
.name = "fdrive",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.post_load = fdrive_post_load,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT8(head, FDrive),
|
|
VMSTATE_UINT8(track, FDrive),
|
|
VMSTATE_UINT8(sect, FDrive),
|
|
VMSTATE_END_OF_LIST()
|
|
},
|
|
.subsections = (const VMStateDescription*[]) {
|
|
&vmstate_fdrive_media_changed,
|
|
&vmstate_fdrive_media_rate,
|
|
&vmstate_fdrive_perpendicular,
|
|
NULL
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Reconstructs the phase from register values according to the logic that was
|
|
* implemented in qemu 2.3. This is the default value that is used if the phase
|
|
* subsection is not present on migration.
|
|
*
|
|
* Don't change this function to reflect newer qemu versions, it is part of
|
|
* the migration ABI.
|
|
*/
|
|
static int reconstruct_phase(FDCtrl *fdctrl)
|
|
{
|
|
if (fdctrl->msr & FD_MSR_NONDMA) {
|
|
return FD_PHASE_EXECUTION;
|
|
} else if ((fdctrl->msr & FD_MSR_RQM) == 0) {
|
|
/* qemu 2.3 disabled RQM only during DMA transfers */
|
|
return FD_PHASE_EXECUTION;
|
|
} else if (fdctrl->msr & FD_MSR_DIO) {
|
|
return FD_PHASE_RESULT;
|
|
} else {
|
|
return FD_PHASE_COMMAND;
|
|
}
|
|
}
|
|
|
|
static int fdc_pre_save(void *opaque)
|
|
{
|
|
FDCtrl *s = opaque;
|
|
|
|
s->dor_vmstate = s->dor | GET_CUR_DRV(s);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fdc_pre_load(void *opaque)
|
|
{
|
|
FDCtrl *s = opaque;
|
|
s->phase = FD_PHASE_RECONSTRUCT;
|
|
return 0;
|
|
}
|
|
|
|
static int fdc_post_load(void *opaque, int version_id)
|
|
{
|
|
FDCtrl *s = opaque;
|
|
|
|
SET_CUR_DRV(s, s->dor_vmstate & FD_DOR_SELMASK);
|
|
s->dor = s->dor_vmstate & ~FD_DOR_SELMASK;
|
|
|
|
if (s->phase == FD_PHASE_RECONSTRUCT) {
|
|
s->phase = reconstruct_phase(s);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool fdc_reset_sensei_needed(void *opaque)
|
|
{
|
|
FDCtrl *s = opaque;
|
|
|
|
return s->reset_sensei != 0;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_fdc_reset_sensei = {
|
|
.name = "fdc/reset_sensei",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.needed = fdc_reset_sensei_needed,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_INT32(reset_sensei, FDCtrl),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static bool fdc_result_timer_needed(void *opaque)
|
|
{
|
|
FDCtrl *s = opaque;
|
|
|
|
return timer_pending(s->result_timer);
|
|
}
|
|
|
|
static const VMStateDescription vmstate_fdc_result_timer = {
|
|
.name = "fdc/result_timer",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.needed = fdc_result_timer_needed,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_TIMER_PTR(result_timer, FDCtrl),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static bool fdc_phase_needed(void *opaque)
|
|
{
|
|
FDCtrl *fdctrl = opaque;
|
|
|
|
return reconstruct_phase(fdctrl) != fdctrl->phase;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_fdc_phase = {
|
|
.name = "fdc/phase",
|
|
.version_id = 1,
|
|
.minimum_version_id = 1,
|
|
.needed = fdc_phase_needed,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_UINT8(phase, FDCtrl),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static const VMStateDescription vmstate_fdc = {
|
|
.name = "fdc",
|
|
.version_id = 2,
|
|
.minimum_version_id = 2,
|
|
.pre_save = fdc_pre_save,
|
|
.pre_load = fdc_pre_load,
|
|
.post_load = fdc_post_load,
|
|
.fields = (VMStateField[]) {
|
|
/* Controller State */
|
|
VMSTATE_UINT8(sra, FDCtrl),
|
|
VMSTATE_UINT8(srb, FDCtrl),
|
|
VMSTATE_UINT8(dor_vmstate, FDCtrl),
|
|
VMSTATE_UINT8(tdr, FDCtrl),
|
|
VMSTATE_UINT8(dsr, FDCtrl),
|
|
VMSTATE_UINT8(msr, FDCtrl),
|
|
VMSTATE_UINT8(status0, FDCtrl),
|
|
VMSTATE_UINT8(status1, FDCtrl),
|
|
VMSTATE_UINT8(status2, FDCtrl),
|
|
/* Command FIFO */
|
|
VMSTATE_VARRAY_INT32(fifo, FDCtrl, fifo_size, 0, vmstate_info_uint8,
|
|
uint8_t),
|
|
VMSTATE_UINT32(data_pos, FDCtrl),
|
|
VMSTATE_UINT32(data_len, FDCtrl),
|
|
VMSTATE_UINT8(data_state, FDCtrl),
|
|
VMSTATE_UINT8(data_dir, FDCtrl),
|
|
VMSTATE_UINT8(eot, FDCtrl),
|
|
/* States kept only to be returned back */
|
|
VMSTATE_UINT8(timer0, FDCtrl),
|
|
VMSTATE_UINT8(timer1, FDCtrl),
|
|
VMSTATE_UINT8(precomp_trk, FDCtrl),
|
|
VMSTATE_UINT8(config, FDCtrl),
|
|
VMSTATE_UINT8(lock, FDCtrl),
|
|
VMSTATE_UINT8(pwrd, FDCtrl),
|
|
VMSTATE_UINT8_EQUAL(num_floppies, FDCtrl, NULL),
|
|
VMSTATE_STRUCT_ARRAY(drives, FDCtrl, MAX_FD, 1,
|
|
vmstate_fdrive, FDrive),
|
|
VMSTATE_END_OF_LIST()
|
|
},
|
|
.subsections = (const VMStateDescription*[]) {
|
|
&vmstate_fdc_reset_sensei,
|
|
&vmstate_fdc_result_timer,
|
|
&vmstate_fdc_phase,
|
|
NULL
|
|
}
|
|
};
|
|
|
|
static void fdctrl_external_reset_sysbus(DeviceState *d)
|
|
{
|
|
FDCtrlSysBus *sys = SYSBUS_FDC(d);
|
|
FDCtrl *s = &sys->state;
|
|
|
|
fdctrl_reset(s, 0);
|
|
}
|
|
|
|
static void fdctrl_external_reset_isa(DeviceState *d)
|
|
{
|
|
FDCtrlISABus *isa = ISA_FDC(d);
|
|
FDCtrl *s = &isa->state;
|
|
|
|
fdctrl_reset(s, 0);
|
|
}
|
|
|
|
static void fdctrl_handle_tc(void *opaque, int irq, int level)
|
|
{
|
|
//FDCtrl *s = opaque;
|
|
|
|
if (level) {
|
|
// XXX
|
|
FLOPPY_DPRINTF("TC pulsed\n");
|
|
}
|
|
}
|
|
|
|
/* Change IRQ state */
|
|
static void fdctrl_reset_irq(FDCtrl *fdctrl)
|
|
{
|
|
fdctrl->status0 = 0;
|
|
if (!(fdctrl->sra & FD_SRA_INTPEND))
|
|
return;
|
|
FLOPPY_DPRINTF("Reset interrupt\n");
|
|
qemu_set_irq(fdctrl->irq, 0);
|
|
fdctrl->sra &= ~FD_SRA_INTPEND;
|
|
}
|
|
|
|
static void fdctrl_raise_irq(FDCtrl *fdctrl)
|
|
{
|
|
if (!(fdctrl->sra & FD_SRA_INTPEND)) {
|
|
qemu_set_irq(fdctrl->irq, 1);
|
|
fdctrl->sra |= FD_SRA_INTPEND;
|
|
}
|
|
|
|
fdctrl->reset_sensei = 0;
|
|
FLOPPY_DPRINTF("Set interrupt status to 0x%02x\n", fdctrl->status0);
|
|
}
|
|
|
|
/* Reset controller */
|
|
static void fdctrl_reset(FDCtrl *fdctrl, int do_irq)
|
|
{
|
|
int i;
|
|
|
|
FLOPPY_DPRINTF("reset controller\n");
|
|
fdctrl_reset_irq(fdctrl);
|
|
/* Initialise controller */
|
|
fdctrl->sra = 0;
|
|
fdctrl->srb = 0xc0;
|
|
if (!fdctrl->drives[1].blk) {
|
|
fdctrl->sra |= FD_SRA_nDRV2;
|
|
}
|
|
fdctrl->cur_drv = 0;
|
|
fdctrl->dor = FD_DOR_nRESET;
|
|
fdctrl->dor |= (fdctrl->dma_chann != -1) ? FD_DOR_DMAEN : 0;
|
|
fdctrl->msr = FD_MSR_RQM;
|
|
fdctrl->reset_sensei = 0;
|
|
timer_del(fdctrl->result_timer);
|
|
/* FIFO state */
|
|
fdctrl->data_pos = 0;
|
|
fdctrl->data_len = 0;
|
|
fdctrl->data_state = 0;
|
|
fdctrl->data_dir = FD_DIR_WRITE;
|
|
for (i = 0; i < MAX_FD; i++)
|
|
fd_recalibrate(&fdctrl->drives[i]);
|
|
fdctrl_to_command_phase(fdctrl);
|
|
if (do_irq) {
|
|
fdctrl->status0 |= FD_SR0_RDYCHG;
|
|
fdctrl_raise_irq(fdctrl);
|
|
fdctrl->reset_sensei = FD_RESET_SENSEI_COUNT;
|
|
}
|
|
}
|
|
|
|
static inline FDrive *drv0(FDCtrl *fdctrl)
|
|
{
|
|
return &fdctrl->drives[(fdctrl->tdr & FD_TDR_BOOTSEL) >> 2];
|
|
}
|
|
|
|
static inline FDrive *drv1(FDCtrl *fdctrl)
|
|
{
|
|
if ((fdctrl->tdr & FD_TDR_BOOTSEL) < (1 << 2))
|
|
return &fdctrl->drives[1];
|
|
else
|
|
return &fdctrl->drives[0];
|
|
}
|
|
|
|
#if MAX_FD == 4
|
|
static inline FDrive *drv2(FDCtrl *fdctrl)
|
|
{
|
|
if ((fdctrl->tdr & FD_TDR_BOOTSEL) < (2 << 2))
|
|
return &fdctrl->drives[2];
|
|
else
|
|
return &fdctrl->drives[1];
|
|
}
|
|
|
|
static inline FDrive *drv3(FDCtrl *fdctrl)
|
|
{
|
|
if ((fdctrl->tdr & FD_TDR_BOOTSEL) < (3 << 2))
|
|
return &fdctrl->drives[3];
|
|
else
|
|
return &fdctrl->drives[2];
|
|
}
|
|
#endif
|
|
|
|
static FDrive *get_drv(FDCtrl *fdctrl, int unit)
|
|
{
|
|
switch (unit) {
|
|
case 0: return drv0(fdctrl);
|
|
case 1: return drv1(fdctrl);
|
|
#if MAX_FD == 4
|
|
case 2: return drv2(fdctrl);
|
|
case 3: return drv3(fdctrl);
|
|
#endif
|
|
default: return NULL;
|
|
}
|
|
}
|
|
|
|
static FDrive *get_cur_drv(FDCtrl *fdctrl)
|
|
{
|
|
return get_drv(fdctrl, fdctrl->cur_drv);
|
|
}
|
|
|
|
/* Status A register : 0x00 (read-only) */
|
|
static uint32_t fdctrl_read_statusA(FDCtrl *fdctrl)
|
|
{
|
|
uint32_t retval = fdctrl->sra;
|
|
|
|
FLOPPY_DPRINTF("status register A: 0x%02x\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* Status B register : 0x01 (read-only) */
|
|
static uint32_t fdctrl_read_statusB(FDCtrl *fdctrl)
|
|
{
|
|
uint32_t retval = fdctrl->srb;
|
|
|
|
FLOPPY_DPRINTF("status register B: 0x%02x\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* Digital output register : 0x02 */
|
|
static uint32_t fdctrl_read_dor(FDCtrl *fdctrl)
|
|
{
|
|
uint32_t retval = fdctrl->dor;
|
|
|
|
/* Selected drive */
|
|
retval |= fdctrl->cur_drv;
|
|
FLOPPY_DPRINTF("digital output register: 0x%02x\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void fdctrl_write_dor(FDCtrl *fdctrl, uint32_t value)
|
|
{
|
|
FLOPPY_DPRINTF("digital output register set to 0x%02x\n", value);
|
|
|
|
/* Motors */
|
|
if (value & FD_DOR_MOTEN0)
|
|
fdctrl->srb |= FD_SRB_MTR0;
|
|
else
|
|
fdctrl->srb &= ~FD_SRB_MTR0;
|
|
if (value & FD_DOR_MOTEN1)
|
|
fdctrl->srb |= FD_SRB_MTR1;
|
|
else
|
|
fdctrl->srb &= ~FD_SRB_MTR1;
|
|
|
|
/* Drive */
|
|
if (value & 1)
|
|
fdctrl->srb |= FD_SRB_DR0;
|
|
else
|
|
fdctrl->srb &= ~FD_SRB_DR0;
|
|
|
|
/* Reset */
|
|
if (!(value & FD_DOR_nRESET)) {
|
|
if (fdctrl->dor & FD_DOR_nRESET) {
|
|
FLOPPY_DPRINTF("controller enter RESET state\n");
|
|
}
|
|
} else {
|
|
if (!(fdctrl->dor & FD_DOR_nRESET)) {
|
|
FLOPPY_DPRINTF("controller out of RESET state\n");
|
|
fdctrl_reset(fdctrl, 1);
|
|
fdctrl->dsr &= ~FD_DSR_PWRDOWN;
|
|
}
|
|
}
|
|
/* Selected drive */
|
|
fdctrl->cur_drv = value & FD_DOR_SELMASK;
|
|
|
|
fdctrl->dor = value;
|
|
}
|
|
|
|
/* Tape drive register : 0x03 */
|
|
static uint32_t fdctrl_read_tape(FDCtrl *fdctrl)
|
|
{
|
|
uint32_t retval = fdctrl->tdr;
|
|
|
|
FLOPPY_DPRINTF("tape drive register: 0x%02x\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void fdctrl_write_tape(FDCtrl *fdctrl, uint32_t value)
|
|
{
|
|
/* Reset mode */
|
|
if (!(fdctrl->dor & FD_DOR_nRESET)) {
|
|
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
|
|
return;
|
|
}
|
|
FLOPPY_DPRINTF("tape drive register set to 0x%02x\n", value);
|
|
/* Disk boot selection indicator */
|
|
fdctrl->tdr = value & FD_TDR_BOOTSEL;
|
|
/* Tape indicators: never allow */
|
|
}
|
|
|
|
/* Main status register : 0x04 (read) */
|
|
static uint32_t fdctrl_read_main_status(FDCtrl *fdctrl)
|
|
{
|
|
uint32_t retval = fdctrl->msr;
|
|
|
|
fdctrl->dsr &= ~FD_DSR_PWRDOWN;
|
|
fdctrl->dor |= FD_DOR_nRESET;
|
|
|
|
FLOPPY_DPRINTF("main status register: 0x%02x\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* Data select rate register : 0x04 (write) */
|
|
static void fdctrl_write_rate(FDCtrl *fdctrl, uint32_t value)
|
|
{
|
|
/* Reset mode */
|
|
if (!(fdctrl->dor & FD_DOR_nRESET)) {
|
|
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
|
|
return;
|
|
}
|
|
FLOPPY_DPRINTF("select rate register set to 0x%02x\n", value);
|
|
/* Reset: autoclear */
|
|
if (value & FD_DSR_SWRESET) {
|
|
fdctrl->dor &= ~FD_DOR_nRESET;
|
|
fdctrl_reset(fdctrl, 1);
|
|
fdctrl->dor |= FD_DOR_nRESET;
|
|
}
|
|
if (value & FD_DSR_PWRDOWN) {
|
|
fdctrl_reset(fdctrl, 1);
|
|
}
|
|
fdctrl->dsr = value;
|
|
}
|
|
|
|
/* Configuration control register: 0x07 (write) */
|
|
static void fdctrl_write_ccr(FDCtrl *fdctrl, uint32_t value)
|
|
{
|
|
/* Reset mode */
|
|
if (!(fdctrl->dor & FD_DOR_nRESET)) {
|
|
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
|
|
return;
|
|
}
|
|
FLOPPY_DPRINTF("configuration control register set to 0x%02x\n", value);
|
|
|
|
/* Only the rate selection bits used in AT mode, and we
|
|
* store those in the DSR.
|
|
*/
|
|
fdctrl->dsr = (fdctrl->dsr & ~FD_DSR_DRATEMASK) |
|
|
(value & FD_DSR_DRATEMASK);
|
|
}
|
|
|
|
static int fdctrl_media_changed(FDrive *drv)
|
|
{
|
|
return drv->media_changed;
|
|
}
|
|
|
|
/* Digital input register : 0x07 (read-only) */
|
|
static uint32_t fdctrl_read_dir(FDCtrl *fdctrl)
|
|
{
|
|
uint32_t retval = 0;
|
|
|
|
if (fdctrl_media_changed(get_cur_drv(fdctrl))) {
|
|
retval |= FD_DIR_DSKCHG;
|
|
}
|
|
if (retval != 0) {
|
|
FLOPPY_DPRINTF("Floppy digital input register: 0x%02x\n", retval);
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* Clear the FIFO and update the state for receiving the next command */
|
|
static void fdctrl_to_command_phase(FDCtrl *fdctrl)
|
|
{
|
|
fdctrl->phase = FD_PHASE_COMMAND;
|
|
fdctrl->data_dir = FD_DIR_WRITE;
|
|
fdctrl->data_pos = 0;
|
|
fdctrl->data_len = 1; /* Accept command byte, adjust for params later */
|
|
fdctrl->msr &= ~(FD_MSR_CMDBUSY | FD_MSR_DIO);
|
|
fdctrl->msr |= FD_MSR_RQM;
|
|
}
|
|
|
|
/* Update the state to allow the guest to read out the command status.
|
|
* @fifo_len is the number of result bytes to be read out. */
|
|
static void fdctrl_to_result_phase(FDCtrl *fdctrl, int fifo_len)
|
|
{
|
|
fdctrl->phase = FD_PHASE_RESULT;
|
|
fdctrl->data_dir = FD_DIR_READ;
|
|
fdctrl->data_len = fifo_len;
|
|
fdctrl->data_pos = 0;
|
|
fdctrl->msr |= FD_MSR_CMDBUSY | FD_MSR_RQM | FD_MSR_DIO;
|
|
}
|
|
|
|
/* Set an error: unimplemented/unknown command */
|
|
static void fdctrl_unimplemented(FDCtrl *fdctrl, int direction)
|
|
{
|
|
qemu_log_mask(LOG_UNIMP, "fdc: unimplemented command 0x%02x\n",
|
|
fdctrl->fifo[0]);
|
|
fdctrl->fifo[0] = FD_SR0_INVCMD;
|
|
fdctrl_to_result_phase(fdctrl, 1);
|
|
}
|
|
|
|
/* Seek to next sector
|
|
* returns 0 when end of track reached (for DBL_SIDES on head 1)
|
|
* otherwise returns 1
|
|
*/
|
|
static int fdctrl_seek_to_next_sect(FDCtrl *fdctrl, FDrive *cur_drv)
|
|
{
|
|
FLOPPY_DPRINTF("seek to next sector (%d %02x %02x => %d)\n",
|
|
cur_drv->head, cur_drv->track, cur_drv->sect,
|
|
fd_sector(cur_drv));
|
|
/* XXX: cur_drv->sect >= cur_drv->last_sect should be an
|
|
error in fact */
|
|
uint8_t new_head = cur_drv->head;
|
|
uint8_t new_track = cur_drv->track;
|
|
uint8_t new_sect = cur_drv->sect;
|
|
|
|
int ret = 1;
|
|
|
|
if (new_sect >= cur_drv->last_sect ||
|
|
new_sect == fdctrl->eot) {
|
|
new_sect = 1;
|
|
if (FD_MULTI_TRACK(fdctrl->data_state)) {
|
|
if (new_head == 0 &&
|
|
(cur_drv->flags & FDISK_DBL_SIDES) != 0) {
|
|
new_head = 1;
|
|
} else {
|
|
new_head = 0;
|
|
new_track++;
|
|
fdctrl->status0 |= FD_SR0_SEEK;
|
|
if ((cur_drv->flags & FDISK_DBL_SIDES) == 0) {
|
|
ret = 0;
|
|
}
|
|
}
|
|
} else {
|
|
fdctrl->status0 |= FD_SR0_SEEK;
|
|
new_track++;
|
|
ret = 0;
|
|
}
|
|
if (ret == 1) {
|
|
FLOPPY_DPRINTF("seek to next track (%d %02x %02x => %d)\n",
|
|
new_head, new_track, new_sect, fd_sector(cur_drv));
|
|
}
|
|
} else {
|
|
new_sect++;
|
|
}
|
|
fd_seek(cur_drv, new_head, new_track, new_sect, 1);
|
|
return ret;
|
|
}
|
|
|
|
/* Callback for transfer end (stop or abort) */
|
|
static void fdctrl_stop_transfer(FDCtrl *fdctrl, uint8_t status0,
|
|
uint8_t status1, uint8_t status2)
|
|
{
|
|
FDrive *cur_drv;
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
|
|
fdctrl->status0 &= ~(FD_SR0_DS0 | FD_SR0_DS1 | FD_SR0_HEAD);
|
|
fdctrl->status0 |= GET_CUR_DRV(fdctrl);
|
|
if (cur_drv->head) {
|
|
fdctrl->status0 |= FD_SR0_HEAD;
|
|
}
|
|
fdctrl->status0 |= status0;
|
|
|
|
FLOPPY_DPRINTF("transfer status: %02x %02x %02x (%02x)\n",
|
|
status0, status1, status2, fdctrl->status0);
|
|
fdctrl->fifo[0] = fdctrl->status0;
|
|
fdctrl->fifo[1] = status1;
|
|
fdctrl->fifo[2] = status2;
|
|
fdctrl->fifo[3] = cur_drv->track;
|
|
fdctrl->fifo[4] = cur_drv->head;
|
|
fdctrl->fifo[5] = cur_drv->sect;
|
|
fdctrl->fifo[6] = FD_SECTOR_SC;
|
|
fdctrl->data_dir = FD_DIR_READ;
|
|
if (fdctrl->dma_chann != -1 && !(fdctrl->msr & FD_MSR_NONDMA)) {
|
|
IsaDmaClass *k = ISADMA_GET_CLASS(fdctrl->dma);
|
|
k->release_DREQ(fdctrl->dma, fdctrl->dma_chann);
|
|
}
|
|
fdctrl->msr |= FD_MSR_RQM | FD_MSR_DIO;
|
|
fdctrl->msr &= ~FD_MSR_NONDMA;
|
|
|
|
fdctrl_to_result_phase(fdctrl, 7);
|
|
fdctrl_raise_irq(fdctrl);
|
|
}
|
|
|
|
/* Prepare a data transfer (either DMA or FIFO) */
|
|
static void fdctrl_start_transfer(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv;
|
|
uint8_t kh, kt, ks;
|
|
|
|
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
kt = fdctrl->fifo[2];
|
|
kh = fdctrl->fifo[3];
|
|
ks = fdctrl->fifo[4];
|
|
FLOPPY_DPRINTF("Start transfer at %d %d %02x %02x (%d)\n",
|
|
GET_CUR_DRV(fdctrl), kh, kt, ks,
|
|
fd_sector_calc(kh, kt, ks, cur_drv->last_sect,
|
|
NUM_SIDES(cur_drv)));
|
|
switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & FD_CONFIG_EIS)) {
|
|
case 2:
|
|
/* sect too big */
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00);
|
|
fdctrl->fifo[3] = kt;
|
|
fdctrl->fifo[4] = kh;
|
|
fdctrl->fifo[5] = ks;
|
|
return;
|
|
case 3:
|
|
/* track too big */
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, FD_SR1_EC, 0x00);
|
|
fdctrl->fifo[3] = kt;
|
|
fdctrl->fifo[4] = kh;
|
|
fdctrl->fifo[5] = ks;
|
|
return;
|
|
case 4:
|
|
/* No seek enabled */
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00);
|
|
fdctrl->fifo[3] = kt;
|
|
fdctrl->fifo[4] = kh;
|
|
fdctrl->fifo[5] = ks;
|
|
return;
|
|
case 1:
|
|
fdctrl->status0 |= FD_SR0_SEEK;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Check the data rate. If the programmed data rate does not match
|
|
* the currently inserted medium, the operation has to fail. */
|
|
if ((fdctrl->dsr & FD_DSR_DRATEMASK) != cur_drv->media_rate) {
|
|
FLOPPY_DPRINTF("data rate mismatch (fdc=%d, media=%d)\n",
|
|
fdctrl->dsr & FD_DSR_DRATEMASK, cur_drv->media_rate);
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, FD_SR1_MA, 0x00);
|
|
fdctrl->fifo[3] = kt;
|
|
fdctrl->fifo[4] = kh;
|
|
fdctrl->fifo[5] = ks;
|
|
return;
|
|
}
|
|
|
|
/* Set the FIFO state */
|
|
fdctrl->data_dir = direction;
|
|
fdctrl->data_pos = 0;
|
|
assert(fdctrl->msr & FD_MSR_CMDBUSY);
|
|
if (fdctrl->fifo[0] & 0x80)
|
|
fdctrl->data_state |= FD_STATE_MULTI;
|
|
else
|
|
fdctrl->data_state &= ~FD_STATE_MULTI;
|
|
if (fdctrl->fifo[5] == 0) {
|
|
fdctrl->data_len = fdctrl->fifo[8];
|
|
} else {
|
|
int tmp;
|
|
fdctrl->data_len = 128 << (fdctrl->fifo[5] > 7 ? 7 : fdctrl->fifo[5]);
|
|
tmp = (fdctrl->fifo[6] - ks + 1);
|
|
if (fdctrl->fifo[0] & 0x80)
|
|
tmp += fdctrl->fifo[6];
|
|
fdctrl->data_len *= tmp;
|
|
}
|
|
fdctrl->eot = fdctrl->fifo[6];
|
|
if (fdctrl->dor & FD_DOR_DMAEN) {
|
|
/* DMA transfer is enabled. */
|
|
IsaDmaClass *k = ISADMA_GET_CLASS(fdctrl->dma);
|
|
|
|
FLOPPY_DPRINTF("direction=%d (%d - %d)\n",
|
|
direction, (128 << fdctrl->fifo[5]) *
|
|
(cur_drv->last_sect - ks + 1), fdctrl->data_len);
|
|
|
|
/* No access is allowed until DMA transfer has completed */
|
|
fdctrl->msr &= ~FD_MSR_RQM;
|
|
if (direction != FD_DIR_VERIFY) {
|
|
/*
|
|
* Now, we just have to wait for the DMA controller to
|
|
* recall us...
|
|
*/
|
|
k->hold_DREQ(fdctrl->dma, fdctrl->dma_chann);
|
|
k->schedule(fdctrl->dma);
|
|
} else {
|
|
/* Start transfer */
|
|
fdctrl_transfer_handler(fdctrl, fdctrl->dma_chann, 0,
|
|
fdctrl->data_len);
|
|
}
|
|
return;
|
|
}
|
|
FLOPPY_DPRINTF("start non-DMA transfer\n");
|
|
fdctrl->msr |= FD_MSR_NONDMA | FD_MSR_RQM;
|
|
if (direction != FD_DIR_WRITE)
|
|
fdctrl->msr |= FD_MSR_DIO;
|
|
/* IO based transfer: calculate len */
|
|
fdctrl_raise_irq(fdctrl);
|
|
}
|
|
|
|
/* Prepare a transfer of deleted data */
|
|
static void fdctrl_start_transfer_del(FDCtrl *fdctrl, int direction)
|
|
{
|
|
qemu_log_mask(LOG_UNIMP, "fdctrl_start_transfer_del() unimplemented\n");
|
|
|
|
/* We don't handle deleted data,
|
|
* so we don't return *ANYTHING*
|
|
*/
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM | FD_SR0_SEEK, 0x00, 0x00);
|
|
}
|
|
|
|
/* handlers for DMA transfers */
|
|
static int fdctrl_transfer_handler (void *opaque, int nchan,
|
|
int dma_pos, int dma_len)
|
|
{
|
|
FDCtrl *fdctrl;
|
|
FDrive *cur_drv;
|
|
int len, start_pos, rel_pos;
|
|
uint8_t status0 = 0x00, status1 = 0x00, status2 = 0x00;
|
|
IsaDmaClass *k;
|
|
|
|
fdctrl = opaque;
|
|
if (fdctrl->msr & FD_MSR_RQM) {
|
|
FLOPPY_DPRINTF("Not in DMA transfer mode !\n");
|
|
return 0;
|
|
}
|
|
k = ISADMA_GET_CLASS(fdctrl->dma);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
if (fdctrl->data_dir == FD_DIR_SCANE || fdctrl->data_dir == FD_DIR_SCANL ||
|
|
fdctrl->data_dir == FD_DIR_SCANH)
|
|
status2 = FD_SR2_SNS;
|
|
if (dma_len > fdctrl->data_len)
|
|
dma_len = fdctrl->data_len;
|
|
if (cur_drv->blk == NULL) {
|
|
if (fdctrl->data_dir == FD_DIR_WRITE)
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM | FD_SR0_SEEK, 0x00, 0x00);
|
|
else
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00);
|
|
len = 0;
|
|
goto transfer_error;
|
|
}
|
|
rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
|
|
for (start_pos = fdctrl->data_pos; fdctrl->data_pos < dma_len;) {
|
|
len = dma_len - fdctrl->data_pos;
|
|
if (len + rel_pos > FD_SECTOR_LEN)
|
|
len = FD_SECTOR_LEN - rel_pos;
|
|
FLOPPY_DPRINTF("copy %d bytes (%d %d %d) %d pos %d %02x "
|
|
"(%d-0x%08x 0x%08x)\n", len, dma_len, fdctrl->data_pos,
|
|
fdctrl->data_len, GET_CUR_DRV(fdctrl), cur_drv->head,
|
|
cur_drv->track, cur_drv->sect, fd_sector(cur_drv),
|
|
fd_sector(cur_drv) * FD_SECTOR_LEN);
|
|
if (fdctrl->data_dir != FD_DIR_WRITE ||
|
|
len < FD_SECTOR_LEN || rel_pos != 0) {
|
|
/* READ & SCAN commands and realign to a sector for WRITE */
|
|
if (blk_pread(cur_drv->blk, fd_offset(cur_drv),
|
|
fdctrl->fifo, BDRV_SECTOR_SIZE) < 0) {
|
|
FLOPPY_DPRINTF("Floppy: error getting sector %d\n",
|
|
fd_sector(cur_drv));
|
|
/* Sure, image size is too small... */
|
|
memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
|
|
}
|
|
}
|
|
switch (fdctrl->data_dir) {
|
|
case FD_DIR_READ:
|
|
/* READ commands */
|
|
k->write_memory(fdctrl->dma, nchan, fdctrl->fifo + rel_pos,
|
|
fdctrl->data_pos, len);
|
|
break;
|
|
case FD_DIR_WRITE:
|
|
/* WRITE commands */
|
|
if (cur_drv->ro) {
|
|
/* Handle readonly medium early, no need to do DMA, touch the
|
|
* LED or attempt any writes. A real floppy doesn't attempt
|
|
* to write to readonly media either. */
|
|
fdctrl_stop_transfer(fdctrl,
|
|
FD_SR0_ABNTERM | FD_SR0_SEEK, FD_SR1_NW,
|
|
0x00);
|
|
goto transfer_error;
|
|
}
|
|
|
|
k->read_memory(fdctrl->dma, nchan, fdctrl->fifo + rel_pos,
|
|
fdctrl->data_pos, len);
|
|
if (blk_pwrite(cur_drv->blk, fd_offset(cur_drv),
|
|
fdctrl->fifo, BDRV_SECTOR_SIZE, 0) < 0) {
|
|
FLOPPY_DPRINTF("error writing sector %d\n",
|
|
fd_sector(cur_drv));
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM | FD_SR0_SEEK, 0x00, 0x00);
|
|
goto transfer_error;
|
|
}
|
|
break;
|
|
case FD_DIR_VERIFY:
|
|
/* VERIFY commands */
|
|
break;
|
|
default:
|
|
/* SCAN commands */
|
|
{
|
|
uint8_t tmpbuf[FD_SECTOR_LEN];
|
|
int ret;
|
|
k->read_memory(fdctrl->dma, nchan, tmpbuf, fdctrl->data_pos,
|
|
len);
|
|
ret = memcmp(tmpbuf, fdctrl->fifo + rel_pos, len);
|
|
if (ret == 0) {
|
|
status2 = FD_SR2_SEH;
|
|
goto end_transfer;
|
|
}
|
|
if ((ret < 0 && fdctrl->data_dir == FD_DIR_SCANL) ||
|
|
(ret > 0 && fdctrl->data_dir == FD_DIR_SCANH)) {
|
|
status2 = 0x00;
|
|
goto end_transfer;
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
fdctrl->data_pos += len;
|
|
rel_pos = fdctrl->data_pos % FD_SECTOR_LEN;
|
|
if (rel_pos == 0) {
|
|
/* Seek to next sector */
|
|
if (!fdctrl_seek_to_next_sect(fdctrl, cur_drv))
|
|
break;
|
|
}
|
|
}
|
|
end_transfer:
|
|
len = fdctrl->data_pos - start_pos;
|
|
FLOPPY_DPRINTF("end transfer %d %d %d\n",
|
|
fdctrl->data_pos, len, fdctrl->data_len);
|
|
if (fdctrl->data_dir == FD_DIR_SCANE ||
|
|
fdctrl->data_dir == FD_DIR_SCANL ||
|
|
fdctrl->data_dir == FD_DIR_SCANH)
|
|
status2 = FD_SR2_SEH;
|
|
fdctrl->data_len -= len;
|
|
fdctrl_stop_transfer(fdctrl, status0, status1, status2);
|
|
transfer_error:
|
|
|
|
return len;
|
|
}
|
|
|
|
/* Data register : 0x05 */
|
|
static uint32_t fdctrl_read_data(FDCtrl *fdctrl)
|
|
{
|
|
FDrive *cur_drv;
|
|
uint32_t retval = 0;
|
|
uint32_t pos;
|
|
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
fdctrl->dsr &= ~FD_DSR_PWRDOWN;
|
|
if (!(fdctrl->msr & FD_MSR_RQM) || !(fdctrl->msr & FD_MSR_DIO)) {
|
|
FLOPPY_DPRINTF("error: controller not ready for reading\n");
|
|
return 0;
|
|
}
|
|
|
|
/* If data_len spans multiple sectors, the current position in the FIFO
|
|
* wraps around while fdctrl->data_pos is the real position in the whole
|
|
* request. */
|
|
pos = fdctrl->data_pos;
|
|
pos %= FD_SECTOR_LEN;
|
|
|
|
switch (fdctrl->phase) {
|
|
case FD_PHASE_EXECUTION:
|
|
assert(fdctrl->msr & FD_MSR_NONDMA);
|
|
if (pos == 0) {
|
|
if (fdctrl->data_pos != 0)
|
|
if (!fdctrl_seek_to_next_sect(fdctrl, cur_drv)) {
|
|
FLOPPY_DPRINTF("error seeking to next sector %d\n",
|
|
fd_sector(cur_drv));
|
|
return 0;
|
|
}
|
|
if (blk_pread(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo,
|
|
BDRV_SECTOR_SIZE)
|
|
< 0) {
|
|
FLOPPY_DPRINTF("error getting sector %d\n",
|
|
fd_sector(cur_drv));
|
|
/* Sure, image size is too small... */
|
|
memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
|
|
}
|
|
}
|
|
|
|
if (++fdctrl->data_pos == fdctrl->data_len) {
|
|
fdctrl->msr &= ~FD_MSR_RQM;
|
|
fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
|
|
}
|
|
break;
|
|
|
|
case FD_PHASE_RESULT:
|
|
assert(!(fdctrl->msr & FD_MSR_NONDMA));
|
|
if (++fdctrl->data_pos == fdctrl->data_len) {
|
|
fdctrl->msr &= ~FD_MSR_RQM;
|
|
fdctrl_to_command_phase(fdctrl);
|
|
fdctrl_reset_irq(fdctrl);
|
|
}
|
|
break;
|
|
|
|
case FD_PHASE_COMMAND:
|
|
default:
|
|
abort();
|
|
}
|
|
|
|
retval = fdctrl->fifo[pos];
|
|
FLOPPY_DPRINTF("data register: 0x%02x\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void fdctrl_format_sector(FDCtrl *fdctrl)
|
|
{
|
|
FDrive *cur_drv;
|
|
uint8_t kh, kt, ks;
|
|
|
|
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
kt = fdctrl->fifo[6];
|
|
kh = fdctrl->fifo[7];
|
|
ks = fdctrl->fifo[8];
|
|
FLOPPY_DPRINTF("format sector at %d %d %02x %02x (%d)\n",
|
|
GET_CUR_DRV(fdctrl), kh, kt, ks,
|
|
fd_sector_calc(kh, kt, ks, cur_drv->last_sect,
|
|
NUM_SIDES(cur_drv)));
|
|
switch (fd_seek(cur_drv, kh, kt, ks, fdctrl->config & FD_CONFIG_EIS)) {
|
|
case 2:
|
|
/* sect too big */
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00);
|
|
fdctrl->fifo[3] = kt;
|
|
fdctrl->fifo[4] = kh;
|
|
fdctrl->fifo[5] = ks;
|
|
return;
|
|
case 3:
|
|
/* track too big */
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, FD_SR1_EC, 0x00);
|
|
fdctrl->fifo[3] = kt;
|
|
fdctrl->fifo[4] = kh;
|
|
fdctrl->fifo[5] = ks;
|
|
return;
|
|
case 4:
|
|
/* No seek enabled */
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, 0x00, 0x00);
|
|
fdctrl->fifo[3] = kt;
|
|
fdctrl->fifo[4] = kh;
|
|
fdctrl->fifo[5] = ks;
|
|
return;
|
|
case 1:
|
|
fdctrl->status0 |= FD_SR0_SEEK;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
|
|
if (cur_drv->blk == NULL ||
|
|
blk_pwrite(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo,
|
|
BDRV_SECTOR_SIZE, 0) < 0) {
|
|
FLOPPY_DPRINTF("error formatting sector %d\n", fd_sector(cur_drv));
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM | FD_SR0_SEEK, 0x00, 0x00);
|
|
} else {
|
|
if (cur_drv->sect == cur_drv->last_sect) {
|
|
fdctrl->data_state &= ~FD_STATE_FORMAT;
|
|
/* Last sector done */
|
|
fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
|
|
} else {
|
|
/* More to do */
|
|
fdctrl->data_pos = 0;
|
|
fdctrl->data_len = 4;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void fdctrl_handle_lock(FDCtrl *fdctrl, int direction)
|
|
{
|
|
fdctrl->lock = (fdctrl->fifo[0] & 0x80) ? 1 : 0;
|
|
fdctrl->fifo[0] = fdctrl->lock << 4;
|
|
fdctrl_to_result_phase(fdctrl, 1);
|
|
}
|
|
|
|
static void fdctrl_handle_dumpreg(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv = get_cur_drv(fdctrl);
|
|
|
|
/* Drives position */
|
|
fdctrl->fifo[0] = drv0(fdctrl)->track;
|
|
fdctrl->fifo[1] = drv1(fdctrl)->track;
|
|
#if MAX_FD == 4
|
|
fdctrl->fifo[2] = drv2(fdctrl)->track;
|
|
fdctrl->fifo[3] = drv3(fdctrl)->track;
|
|
#else
|
|
fdctrl->fifo[2] = 0;
|
|
fdctrl->fifo[3] = 0;
|
|
#endif
|
|
/* timers */
|
|
fdctrl->fifo[4] = fdctrl->timer0;
|
|
fdctrl->fifo[5] = (fdctrl->timer1 << 1) | (fdctrl->dor & FD_DOR_DMAEN ? 1 : 0);
|
|
fdctrl->fifo[6] = cur_drv->last_sect;
|
|
fdctrl->fifo[7] = (fdctrl->lock << 7) |
|
|
(cur_drv->perpendicular << 2);
|
|
fdctrl->fifo[8] = fdctrl->config;
|
|
fdctrl->fifo[9] = fdctrl->precomp_trk;
|
|
fdctrl_to_result_phase(fdctrl, 10);
|
|
}
|
|
|
|
static void fdctrl_handle_version(FDCtrl *fdctrl, int direction)
|
|
{
|
|
/* Controller's version */
|
|
fdctrl->fifo[0] = fdctrl->version;
|
|
fdctrl_to_result_phase(fdctrl, 1);
|
|
}
|
|
|
|
static void fdctrl_handle_partid(FDCtrl *fdctrl, int direction)
|
|
{
|
|
fdctrl->fifo[0] = 0x41; /* Stepping 1 */
|
|
fdctrl_to_result_phase(fdctrl, 1);
|
|
}
|
|
|
|
static void fdctrl_handle_restore(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv = get_cur_drv(fdctrl);
|
|
|
|
/* Drives position */
|
|
drv0(fdctrl)->track = fdctrl->fifo[3];
|
|
drv1(fdctrl)->track = fdctrl->fifo[4];
|
|
#if MAX_FD == 4
|
|
drv2(fdctrl)->track = fdctrl->fifo[5];
|
|
drv3(fdctrl)->track = fdctrl->fifo[6];
|
|
#endif
|
|
/* timers */
|
|
fdctrl->timer0 = fdctrl->fifo[7];
|
|
fdctrl->timer1 = fdctrl->fifo[8];
|
|
cur_drv->last_sect = fdctrl->fifo[9];
|
|
fdctrl->lock = fdctrl->fifo[10] >> 7;
|
|
cur_drv->perpendicular = (fdctrl->fifo[10] >> 2) & 0xF;
|
|
fdctrl->config = fdctrl->fifo[11];
|
|
fdctrl->precomp_trk = fdctrl->fifo[12];
|
|
fdctrl->pwrd = fdctrl->fifo[13];
|
|
fdctrl_to_command_phase(fdctrl);
|
|
}
|
|
|
|
static void fdctrl_handle_save(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv = get_cur_drv(fdctrl);
|
|
|
|
fdctrl->fifo[0] = 0;
|
|
fdctrl->fifo[1] = 0;
|
|
/* Drives position */
|
|
fdctrl->fifo[2] = drv0(fdctrl)->track;
|
|
fdctrl->fifo[3] = drv1(fdctrl)->track;
|
|
#if MAX_FD == 4
|
|
fdctrl->fifo[4] = drv2(fdctrl)->track;
|
|
fdctrl->fifo[5] = drv3(fdctrl)->track;
|
|
#else
|
|
fdctrl->fifo[4] = 0;
|
|
fdctrl->fifo[5] = 0;
|
|
#endif
|
|
/* timers */
|
|
fdctrl->fifo[6] = fdctrl->timer0;
|
|
fdctrl->fifo[7] = fdctrl->timer1;
|
|
fdctrl->fifo[8] = cur_drv->last_sect;
|
|
fdctrl->fifo[9] = (fdctrl->lock << 7) |
|
|
(cur_drv->perpendicular << 2);
|
|
fdctrl->fifo[10] = fdctrl->config;
|
|
fdctrl->fifo[11] = fdctrl->precomp_trk;
|
|
fdctrl->fifo[12] = fdctrl->pwrd;
|
|
fdctrl->fifo[13] = 0;
|
|
fdctrl->fifo[14] = 0;
|
|
fdctrl_to_result_phase(fdctrl, 15);
|
|
}
|
|
|
|
static void fdctrl_handle_readid(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv = get_cur_drv(fdctrl);
|
|
|
|
cur_drv->head = (fdctrl->fifo[1] >> 2) & 1;
|
|
timer_mod(fdctrl->result_timer, qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
|
|
(NANOSECONDS_PER_SECOND / 50));
|
|
}
|
|
|
|
static void fdctrl_handle_format_track(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv;
|
|
|
|
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
fdctrl->data_state |= FD_STATE_FORMAT;
|
|
if (fdctrl->fifo[0] & 0x80)
|
|
fdctrl->data_state |= FD_STATE_MULTI;
|
|
else
|
|
fdctrl->data_state &= ~FD_STATE_MULTI;
|
|
cur_drv->bps =
|
|
fdctrl->fifo[2] > 7 ? 16384 : 128 << fdctrl->fifo[2];
|
|
#if 0
|
|
cur_drv->last_sect =
|
|
cur_drv->flags & FDISK_DBL_SIDES ? fdctrl->fifo[3] :
|
|
fdctrl->fifo[3] / 2;
|
|
#else
|
|
cur_drv->last_sect = fdctrl->fifo[3];
|
|
#endif
|
|
/* TODO: implement format using DMA expected by the Bochs BIOS
|
|
* and Linux fdformat (read 3 bytes per sector via DMA and fill
|
|
* the sector with the specified fill byte
|
|
*/
|
|
fdctrl->data_state &= ~FD_STATE_FORMAT;
|
|
fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
|
|
}
|
|
|
|
static void fdctrl_handle_specify(FDCtrl *fdctrl, int direction)
|
|
{
|
|
fdctrl->timer0 = (fdctrl->fifo[1] >> 4) & 0xF;
|
|
fdctrl->timer1 = fdctrl->fifo[2] >> 1;
|
|
if (fdctrl->fifo[2] & 1)
|
|
fdctrl->dor &= ~FD_DOR_DMAEN;
|
|
else
|
|
fdctrl->dor |= FD_DOR_DMAEN;
|
|
/* No result back */
|
|
fdctrl_to_command_phase(fdctrl);
|
|
}
|
|
|
|
static void fdctrl_handle_sense_drive_status(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv;
|
|
|
|
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
cur_drv->head = (fdctrl->fifo[1] >> 2) & 1;
|
|
/* 1 Byte status back */
|
|
fdctrl->fifo[0] = (cur_drv->ro << 6) |
|
|
(cur_drv->track == 0 ? 0x10 : 0x00) |
|
|
(cur_drv->head << 2) |
|
|
GET_CUR_DRV(fdctrl) |
|
|
0x28;
|
|
fdctrl_to_result_phase(fdctrl, 1);
|
|
}
|
|
|
|
static void fdctrl_handle_recalibrate(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv;
|
|
|
|
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
fd_recalibrate(cur_drv);
|
|
fdctrl_to_command_phase(fdctrl);
|
|
/* Raise Interrupt */
|
|
fdctrl->status0 |= FD_SR0_SEEK;
|
|
fdctrl_raise_irq(fdctrl);
|
|
}
|
|
|
|
static void fdctrl_handle_sense_interrupt_status(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv = get_cur_drv(fdctrl);
|
|
|
|
if (fdctrl->reset_sensei > 0) {
|
|
fdctrl->fifo[0] =
|
|
FD_SR0_RDYCHG + FD_RESET_SENSEI_COUNT - fdctrl->reset_sensei;
|
|
fdctrl->reset_sensei--;
|
|
} else if (!(fdctrl->sra & FD_SRA_INTPEND)) {
|
|
fdctrl->fifo[0] = FD_SR0_INVCMD;
|
|
fdctrl_to_result_phase(fdctrl, 1);
|
|
return;
|
|
} else {
|
|
fdctrl->fifo[0] =
|
|
(fdctrl->status0 & ~(FD_SR0_HEAD | FD_SR0_DS1 | FD_SR0_DS0))
|
|
| GET_CUR_DRV(fdctrl);
|
|
}
|
|
|
|
fdctrl->fifo[1] = cur_drv->track;
|
|
fdctrl_to_result_phase(fdctrl, 2);
|
|
fdctrl_reset_irq(fdctrl);
|
|
fdctrl->status0 = FD_SR0_RDYCHG;
|
|
}
|
|
|
|
static void fdctrl_handle_seek(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv;
|
|
|
|
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
fdctrl_to_command_phase(fdctrl);
|
|
/* The seek command just sends step pulses to the drive and doesn't care if
|
|
* there is a medium inserted of if it's banging the head against the drive.
|
|
*/
|
|
fd_seek(cur_drv, cur_drv->head, fdctrl->fifo[2], cur_drv->sect, 1);
|
|
/* Raise Interrupt */
|
|
fdctrl->status0 |= FD_SR0_SEEK;
|
|
fdctrl_raise_irq(fdctrl);
|
|
}
|
|
|
|
static void fdctrl_handle_perpendicular_mode(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv = get_cur_drv(fdctrl);
|
|
|
|
if (fdctrl->fifo[1] & 0x80)
|
|
cur_drv->perpendicular = fdctrl->fifo[1] & 0x7;
|
|
/* No result back */
|
|
fdctrl_to_command_phase(fdctrl);
|
|
}
|
|
|
|
static void fdctrl_handle_configure(FDCtrl *fdctrl, int direction)
|
|
{
|
|
fdctrl->config = fdctrl->fifo[2];
|
|
fdctrl->precomp_trk = fdctrl->fifo[3];
|
|
/* No result back */
|
|
fdctrl_to_command_phase(fdctrl);
|
|
}
|
|
|
|
static void fdctrl_handle_powerdown_mode(FDCtrl *fdctrl, int direction)
|
|
{
|
|
fdctrl->pwrd = fdctrl->fifo[1];
|
|
fdctrl->fifo[0] = fdctrl->fifo[1];
|
|
fdctrl_to_result_phase(fdctrl, 1);
|
|
}
|
|
|
|
static void fdctrl_handle_option(FDCtrl *fdctrl, int direction)
|
|
{
|
|
/* No result back */
|
|
fdctrl_to_command_phase(fdctrl);
|
|
}
|
|
|
|
static void fdctrl_handle_drive_specification_command(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv = get_cur_drv(fdctrl);
|
|
uint32_t pos;
|
|
|
|
pos = fdctrl->data_pos - 1;
|
|
pos %= FD_SECTOR_LEN;
|
|
if (fdctrl->fifo[pos] & 0x80) {
|
|
/* Command parameters done */
|
|
if (fdctrl->fifo[pos] & 0x40) {
|
|
fdctrl->fifo[0] = fdctrl->fifo[1];
|
|
fdctrl->fifo[2] = 0;
|
|
fdctrl->fifo[3] = 0;
|
|
fdctrl_to_result_phase(fdctrl, 4);
|
|
} else {
|
|
fdctrl_to_command_phase(fdctrl);
|
|
}
|
|
} else if (fdctrl->data_len > 7) {
|
|
/* ERROR */
|
|
fdctrl->fifo[0] = 0x80 |
|
|
(cur_drv->head << 2) | GET_CUR_DRV(fdctrl);
|
|
fdctrl_to_result_phase(fdctrl, 1);
|
|
}
|
|
}
|
|
|
|
static void fdctrl_handle_relative_seek_in(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv;
|
|
|
|
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
if (fdctrl->fifo[2] + cur_drv->track >= cur_drv->max_track) {
|
|
fd_seek(cur_drv, cur_drv->head, cur_drv->max_track - 1,
|
|
cur_drv->sect, 1);
|
|
} else {
|
|
fd_seek(cur_drv, cur_drv->head,
|
|
cur_drv->track + fdctrl->fifo[2], cur_drv->sect, 1);
|
|
}
|
|
fdctrl_to_command_phase(fdctrl);
|
|
/* Raise Interrupt */
|
|
fdctrl->status0 |= FD_SR0_SEEK;
|
|
fdctrl_raise_irq(fdctrl);
|
|
}
|
|
|
|
static void fdctrl_handle_relative_seek_out(FDCtrl *fdctrl, int direction)
|
|
{
|
|
FDrive *cur_drv;
|
|
|
|
SET_CUR_DRV(fdctrl, fdctrl->fifo[1] & FD_DOR_SELMASK);
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
if (fdctrl->fifo[2] > cur_drv->track) {
|
|
fd_seek(cur_drv, cur_drv->head, 0, cur_drv->sect, 1);
|
|
} else {
|
|
fd_seek(cur_drv, cur_drv->head,
|
|
cur_drv->track - fdctrl->fifo[2], cur_drv->sect, 1);
|
|
}
|
|
fdctrl_to_command_phase(fdctrl);
|
|
/* Raise Interrupt */
|
|
fdctrl->status0 |= FD_SR0_SEEK;
|
|
fdctrl_raise_irq(fdctrl);
|
|
}
|
|
|
|
/*
|
|
* Handlers for the execution phase of each command
|
|
*/
|
|
typedef struct FDCtrlCommand {
|
|
uint8_t value;
|
|
uint8_t mask;
|
|
const char* name;
|
|
int parameters;
|
|
void (*handler)(FDCtrl *fdctrl, int direction);
|
|
int direction;
|
|
} FDCtrlCommand;
|
|
|
|
static const FDCtrlCommand handlers[] = {
|
|
{ FD_CMD_READ, 0x1f, "READ", 8, fdctrl_start_transfer, FD_DIR_READ },
|
|
{ FD_CMD_WRITE, 0x3f, "WRITE", 8, fdctrl_start_transfer, FD_DIR_WRITE },
|
|
{ FD_CMD_SEEK, 0xff, "SEEK", 2, fdctrl_handle_seek },
|
|
{ FD_CMD_SENSE_INTERRUPT_STATUS, 0xff, "SENSE INTERRUPT STATUS", 0, fdctrl_handle_sense_interrupt_status },
|
|
{ FD_CMD_RECALIBRATE, 0xff, "RECALIBRATE", 1, fdctrl_handle_recalibrate },
|
|
{ FD_CMD_FORMAT_TRACK, 0xbf, "FORMAT TRACK", 5, fdctrl_handle_format_track },
|
|
{ FD_CMD_READ_TRACK, 0xbf, "READ TRACK", 8, fdctrl_start_transfer, FD_DIR_READ },
|
|
{ FD_CMD_RESTORE, 0xff, "RESTORE", 17, fdctrl_handle_restore }, /* part of READ DELETED DATA */
|
|
{ FD_CMD_SAVE, 0xff, "SAVE", 0, fdctrl_handle_save }, /* part of READ DELETED DATA */
|
|
{ FD_CMD_READ_DELETED, 0x1f, "READ DELETED DATA", 8, fdctrl_start_transfer_del, FD_DIR_READ },
|
|
{ FD_CMD_SCAN_EQUAL, 0x1f, "SCAN EQUAL", 8, fdctrl_start_transfer, FD_DIR_SCANE },
|
|
{ FD_CMD_VERIFY, 0x1f, "VERIFY", 8, fdctrl_start_transfer, FD_DIR_VERIFY },
|
|
{ FD_CMD_SCAN_LOW_OR_EQUAL, 0x1f, "SCAN LOW OR EQUAL", 8, fdctrl_start_transfer, FD_DIR_SCANL },
|
|
{ FD_CMD_SCAN_HIGH_OR_EQUAL, 0x1f, "SCAN HIGH OR EQUAL", 8, fdctrl_start_transfer, FD_DIR_SCANH },
|
|
{ FD_CMD_WRITE_DELETED, 0x3f, "WRITE DELETED DATA", 8, fdctrl_start_transfer_del, FD_DIR_WRITE },
|
|
{ FD_CMD_READ_ID, 0xbf, "READ ID", 1, fdctrl_handle_readid },
|
|
{ FD_CMD_SPECIFY, 0xff, "SPECIFY", 2, fdctrl_handle_specify },
|
|
{ FD_CMD_SENSE_DRIVE_STATUS, 0xff, "SENSE DRIVE STATUS", 1, fdctrl_handle_sense_drive_status },
|
|
{ FD_CMD_PERPENDICULAR_MODE, 0xff, "PERPENDICULAR MODE", 1, fdctrl_handle_perpendicular_mode },
|
|
{ FD_CMD_CONFIGURE, 0xff, "CONFIGURE", 3, fdctrl_handle_configure },
|
|
{ FD_CMD_POWERDOWN_MODE, 0xff, "POWERDOWN MODE", 2, fdctrl_handle_powerdown_mode },
|
|
{ FD_CMD_OPTION, 0xff, "OPTION", 1, fdctrl_handle_option },
|
|
{ FD_CMD_DRIVE_SPECIFICATION_COMMAND, 0xff, "DRIVE SPECIFICATION COMMAND", 5, fdctrl_handle_drive_specification_command },
|
|
{ FD_CMD_RELATIVE_SEEK_OUT, 0xff, "RELATIVE SEEK OUT", 2, fdctrl_handle_relative_seek_out },
|
|
{ FD_CMD_FORMAT_AND_WRITE, 0xff, "FORMAT AND WRITE", 10, fdctrl_unimplemented },
|
|
{ FD_CMD_RELATIVE_SEEK_IN, 0xff, "RELATIVE SEEK IN", 2, fdctrl_handle_relative_seek_in },
|
|
{ FD_CMD_LOCK, 0x7f, "LOCK", 0, fdctrl_handle_lock },
|
|
{ FD_CMD_DUMPREG, 0xff, "DUMPREG", 0, fdctrl_handle_dumpreg },
|
|
{ FD_CMD_VERSION, 0xff, "VERSION", 0, fdctrl_handle_version },
|
|
{ FD_CMD_PART_ID, 0xff, "PART ID", 0, fdctrl_handle_partid },
|
|
{ FD_CMD_WRITE, 0x1f, "WRITE (BeOS)", 8, fdctrl_start_transfer, FD_DIR_WRITE }, /* not in specification ; BeOS 4.5 bug */
|
|
{ 0, 0, "unknown", 0, fdctrl_unimplemented }, /* default handler */
|
|
};
|
|
/* Associate command to an index in the 'handlers' array */
|
|
static uint8_t command_to_handler[256];
|
|
|
|
static const FDCtrlCommand *get_command(uint8_t cmd)
|
|
{
|
|
int idx;
|
|
|
|
idx = command_to_handler[cmd];
|
|
FLOPPY_DPRINTF("%s command\n", handlers[idx].name);
|
|
return &handlers[idx];
|
|
}
|
|
|
|
static void fdctrl_write_data(FDCtrl *fdctrl, uint32_t value)
|
|
{
|
|
FDrive *cur_drv;
|
|
const FDCtrlCommand *cmd;
|
|
uint32_t pos;
|
|
|
|
/* Reset mode */
|
|
if (!(fdctrl->dor & FD_DOR_nRESET)) {
|
|
FLOPPY_DPRINTF("Floppy controller in RESET state !\n");
|
|
return;
|
|
}
|
|
if (!(fdctrl->msr & FD_MSR_RQM) || (fdctrl->msr & FD_MSR_DIO)) {
|
|
FLOPPY_DPRINTF("error: controller not ready for writing\n");
|
|
return;
|
|
}
|
|
fdctrl->dsr &= ~FD_DSR_PWRDOWN;
|
|
|
|
FLOPPY_DPRINTF("%s: %02x\n", __func__, value);
|
|
|
|
/* If data_len spans multiple sectors, the current position in the FIFO
|
|
* wraps around while fdctrl->data_pos is the real position in the whole
|
|
* request. */
|
|
pos = fdctrl->data_pos++;
|
|
pos %= FD_SECTOR_LEN;
|
|
fdctrl->fifo[pos] = value;
|
|
|
|
if (fdctrl->data_pos == fdctrl->data_len) {
|
|
fdctrl->msr &= ~FD_MSR_RQM;
|
|
}
|
|
|
|
switch (fdctrl->phase) {
|
|
case FD_PHASE_EXECUTION:
|
|
/* For DMA requests, RQM should be cleared during execution phase, so
|
|
* we would have errored out above. */
|
|
assert(fdctrl->msr & FD_MSR_NONDMA);
|
|
|
|
/* FIFO data write */
|
|
if (pos == FD_SECTOR_LEN - 1 ||
|
|
fdctrl->data_pos == fdctrl->data_len) {
|
|
cur_drv = get_cur_drv(fdctrl);
|
|
if (blk_pwrite(cur_drv->blk, fd_offset(cur_drv), fdctrl->fifo,
|
|
BDRV_SECTOR_SIZE, 0) < 0) {
|
|
FLOPPY_DPRINTF("error writing sector %d\n",
|
|
fd_sector(cur_drv));
|
|
break;
|
|
}
|
|
if (!fdctrl_seek_to_next_sect(fdctrl, cur_drv)) {
|
|
FLOPPY_DPRINTF("error seeking to next sector %d\n",
|
|
fd_sector(cur_drv));
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Switch to result phase when done with the transfer */
|
|
if (fdctrl->data_pos == fdctrl->data_len) {
|
|
fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
|
|
}
|
|
break;
|
|
|
|
case FD_PHASE_COMMAND:
|
|
assert(!(fdctrl->msr & FD_MSR_NONDMA));
|
|
assert(fdctrl->data_pos < FD_SECTOR_LEN);
|
|
|
|
if (pos == 0) {
|
|
/* The first byte specifies the command. Now we start reading
|
|
* as many parameters as this command requires. */
|
|
cmd = get_command(value);
|
|
fdctrl->data_len = cmd->parameters + 1;
|
|
if (cmd->parameters) {
|
|
fdctrl->msr |= FD_MSR_RQM;
|
|
}
|
|
fdctrl->msr |= FD_MSR_CMDBUSY;
|
|
}
|
|
|
|
if (fdctrl->data_pos == fdctrl->data_len) {
|
|
/* We have all parameters now, execute the command */
|
|
fdctrl->phase = FD_PHASE_EXECUTION;
|
|
|
|
if (fdctrl->data_state & FD_STATE_FORMAT) {
|
|
fdctrl_format_sector(fdctrl);
|
|
break;
|
|
}
|
|
|
|
cmd = get_command(fdctrl->fifo[0]);
|
|
FLOPPY_DPRINTF("Calling handler for '%s'\n", cmd->name);
|
|
cmd->handler(fdctrl, cmd->direction);
|
|
}
|
|
break;
|
|
|
|
case FD_PHASE_RESULT:
|
|
default:
|
|
abort();
|
|
}
|
|
}
|
|
|
|
static void fdctrl_result_timer(void *opaque)
|
|
{
|
|
FDCtrl *fdctrl = opaque;
|
|
FDrive *cur_drv = get_cur_drv(fdctrl);
|
|
|
|
/* Pretend we are spinning.
|
|
* This is needed for Coherent, which uses READ ID to check for
|
|
* sector interleaving.
|
|
*/
|
|
if (cur_drv->last_sect != 0) {
|
|
cur_drv->sect = (cur_drv->sect % cur_drv->last_sect) + 1;
|
|
}
|
|
/* READ_ID can't automatically succeed! */
|
|
if ((fdctrl->dsr & FD_DSR_DRATEMASK) != cur_drv->media_rate) {
|
|
FLOPPY_DPRINTF("read id rate mismatch (fdc=%d, media=%d)\n",
|
|
fdctrl->dsr & FD_DSR_DRATEMASK, cur_drv->media_rate);
|
|
fdctrl_stop_transfer(fdctrl, FD_SR0_ABNTERM, FD_SR1_MA, 0x00);
|
|
} else {
|
|
fdctrl_stop_transfer(fdctrl, 0x00, 0x00, 0x00);
|
|
}
|
|
}
|
|
|
|
/* Init functions */
|
|
|
|
static void fdctrl_init_drives(FloppyBus *bus, DriveInfo **fds)
|
|
{
|
|
DeviceState *dev;
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_FD; i++) {
|
|
if (fds[i]) {
|
|
dev = qdev_new("floppy");
|
|
qdev_prop_set_uint32(dev, "unit", i);
|
|
qdev_prop_set_enum(dev, "drive-type", FLOPPY_DRIVE_TYPE_AUTO);
|
|
qdev_prop_set_drive_err(dev, "drive", blk_by_legacy_dinfo(fds[i]),
|
|
&error_fatal);
|
|
qdev_realize_and_unref(dev, &bus->bus, &error_fatal);
|
|
}
|
|
}
|
|
}
|
|
|
|
void isa_fdc_init_drives(ISADevice *fdc, DriveInfo **fds)
|
|
{
|
|
fdctrl_init_drives(&ISA_FDC(fdc)->state.bus, fds);
|
|
}
|
|
|
|
void fdctrl_init_sysbus(qemu_irq irq, int dma_chann,
|
|
hwaddr mmio_base, DriveInfo **fds)
|
|
{
|
|
FDCtrl *fdctrl;
|
|
DeviceState *dev;
|
|
SysBusDevice *sbd;
|
|
FDCtrlSysBus *sys;
|
|
|
|
dev = qdev_new("sysbus-fdc");
|
|
sys = SYSBUS_FDC(dev);
|
|
fdctrl = &sys->state;
|
|
fdctrl->dma_chann = dma_chann; /* FIXME */
|
|
sbd = SYS_BUS_DEVICE(dev);
|
|
sysbus_realize_and_unref(sbd, &error_fatal);
|
|
sysbus_connect_irq(sbd, 0, irq);
|
|
sysbus_mmio_map(sbd, 0, mmio_base);
|
|
|
|
fdctrl_init_drives(&sys->state.bus, fds);
|
|
}
|
|
|
|
void sun4m_fdctrl_init(qemu_irq irq, hwaddr io_base,
|
|
DriveInfo **fds, qemu_irq *fdc_tc)
|
|
{
|
|
DeviceState *dev;
|
|
FDCtrlSysBus *sys;
|
|
|
|
dev = qdev_new("sun-fdtwo");
|
|
sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
|
|
sys = SYSBUS_FDC(dev);
|
|
sysbus_connect_irq(SYS_BUS_DEVICE(sys), 0, irq);
|
|
sysbus_mmio_map(SYS_BUS_DEVICE(sys), 0, io_base);
|
|
*fdc_tc = qdev_get_gpio_in(dev, 0);
|
|
|
|
fdctrl_init_drives(&sys->state.bus, fds);
|
|
}
|
|
|
|
static void fdctrl_realize_common(DeviceState *dev, FDCtrl *fdctrl,
|
|
Error **errp)
|
|
{
|
|
int i, j;
|
|
FDrive *drive;
|
|
static int command_tables_inited = 0;
|
|
|
|
if (fdctrl->fallback == FLOPPY_DRIVE_TYPE_AUTO) {
|
|
error_setg(errp, "Cannot choose a fallback FDrive type of 'auto'");
|
|
return;
|
|
}
|
|
|
|
/* Fill 'command_to_handler' lookup table */
|
|
if (!command_tables_inited) {
|
|
command_tables_inited = 1;
|
|
for (i = ARRAY_SIZE(handlers) - 1; i >= 0; i--) {
|
|
for (j = 0; j < sizeof(command_to_handler); j++) {
|
|
if ((j & handlers[i].mask) == handlers[i].value) {
|
|
command_to_handler[j] = i;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
FLOPPY_DPRINTF("init controller\n");
|
|
fdctrl->fifo = qemu_memalign(512, FD_SECTOR_LEN);
|
|
memset(fdctrl->fifo, 0, FD_SECTOR_LEN);
|
|
fdctrl->fifo_size = 512;
|
|
fdctrl->result_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL,
|
|
fdctrl_result_timer, fdctrl);
|
|
|
|
fdctrl->version = 0x90; /* Intel 82078 controller */
|
|
fdctrl->config = FD_CONFIG_EIS | FD_CONFIG_EFIFO; /* Implicit seek, polling & FIFO enabled */
|
|
fdctrl->num_floppies = MAX_FD;
|
|
|
|
if (fdctrl->dma_chann != -1) {
|
|
IsaDmaClass *k;
|
|
assert(fdctrl->dma);
|
|
k = ISADMA_GET_CLASS(fdctrl->dma);
|
|
k->register_channel(fdctrl->dma, fdctrl->dma_chann,
|
|
&fdctrl_transfer_handler, fdctrl);
|
|
}
|
|
|
|
floppy_bus_create(fdctrl, &fdctrl->bus, dev);
|
|
|
|
for (i = 0; i < MAX_FD; i++) {
|
|
drive = &fdctrl->drives[i];
|
|
drive->fdctrl = fdctrl;
|
|
fd_init(drive);
|
|
fd_revalidate(drive);
|
|
}
|
|
}
|
|
|
|
static const MemoryRegionPortio fdc_portio_list[] = {
|
|
{ 1, 5, 1, .read = fdctrl_read, .write = fdctrl_write },
|
|
{ 7, 1, 1, .read = fdctrl_read, .write = fdctrl_write },
|
|
PORTIO_END_OF_LIST(),
|
|
};
|
|
|
|
static void isabus_fdc_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
ISADevice *isadev = ISA_DEVICE(dev);
|
|
FDCtrlISABus *isa = ISA_FDC(dev);
|
|
FDCtrl *fdctrl = &isa->state;
|
|
Error *err = NULL;
|
|
|
|
isa_register_portio_list(isadev, &fdctrl->portio_list,
|
|
isa->iobase, fdc_portio_list, fdctrl,
|
|
"fdc");
|
|
|
|
isa_init_irq(isadev, &fdctrl->irq, isa->irq);
|
|
fdctrl->dma_chann = isa->dma;
|
|
if (fdctrl->dma_chann != -1) {
|
|
fdctrl->dma = isa_get_dma(isa_bus_from_device(isadev), isa->dma);
|
|
if (!fdctrl->dma) {
|
|
error_setg(errp, "ISA controller does not support DMA");
|
|
return;
|
|
}
|
|
}
|
|
|
|
qdev_set_legacy_instance_id(dev, isa->iobase, 2);
|
|
fdctrl_realize_common(dev, fdctrl, &err);
|
|
if (err != NULL) {
|
|
error_propagate(errp, err);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void sysbus_fdc_initfn(Object *obj)
|
|
{
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
|
|
FDCtrlSysBus *sys = SYSBUS_FDC(obj);
|
|
FDCtrl *fdctrl = &sys->state;
|
|
|
|
fdctrl->dma_chann = -1;
|
|
|
|
memory_region_init_io(&fdctrl->iomem, obj, &fdctrl_mem_ops, fdctrl,
|
|
"fdc", 0x08);
|
|
sysbus_init_mmio(sbd, &fdctrl->iomem);
|
|
}
|
|
|
|
static void sun4m_fdc_initfn(Object *obj)
|
|
{
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
|
|
FDCtrlSysBus *sys = SYSBUS_FDC(obj);
|
|
FDCtrl *fdctrl = &sys->state;
|
|
|
|
fdctrl->dma_chann = -1;
|
|
|
|
memory_region_init_io(&fdctrl->iomem, obj, &fdctrl_mem_strict_ops,
|
|
fdctrl, "fdctrl", 0x08);
|
|
sysbus_init_mmio(sbd, &fdctrl->iomem);
|
|
}
|
|
|
|
static void sysbus_fdc_common_initfn(Object *obj)
|
|
{
|
|
DeviceState *dev = DEVICE(obj);
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
|
|
FDCtrlSysBus *sys = SYSBUS_FDC(obj);
|
|
FDCtrl *fdctrl = &sys->state;
|
|
|
|
qdev_set_legacy_instance_id(dev, 0 /* io */, 2); /* FIXME */
|
|
|
|
sysbus_init_irq(sbd, &fdctrl->irq);
|
|
qdev_init_gpio_in(dev, fdctrl_handle_tc, 1);
|
|
}
|
|
|
|
static void sysbus_fdc_common_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
FDCtrlSysBus *sys = SYSBUS_FDC(dev);
|
|
FDCtrl *fdctrl = &sys->state;
|
|
|
|
fdctrl_realize_common(dev, fdctrl, errp);
|
|
}
|
|
|
|
FloppyDriveType isa_fdc_get_drive_type(ISADevice *fdc, int i)
|
|
{
|
|
FDCtrlISABus *isa = ISA_FDC(fdc);
|
|
|
|
return isa->state.drives[i].drive;
|
|
}
|
|
|
|
static void isa_fdc_get_drive_max_chs(FloppyDriveType type, uint8_t *maxc,
|
|
uint8_t *maxh, uint8_t *maxs)
|
|
{
|
|
const FDFormat *fdf;
|
|
|
|
*maxc = *maxh = *maxs = 0;
|
|
for (fdf = fd_formats; fdf->drive != FLOPPY_DRIVE_TYPE_NONE; fdf++) {
|
|
if (fdf->drive != type) {
|
|
continue;
|
|
}
|
|
if (*maxc < fdf->max_track) {
|
|
*maxc = fdf->max_track;
|
|
}
|
|
if (*maxh < fdf->max_head) {
|
|
*maxh = fdf->max_head;
|
|
}
|
|
if (*maxs < fdf->last_sect) {
|
|
*maxs = fdf->last_sect;
|
|
}
|
|
}
|
|
(*maxc)--;
|
|
}
|
|
|
|
static Aml *build_fdinfo_aml(int idx, FloppyDriveType type)
|
|
{
|
|
Aml *dev, *fdi;
|
|
uint8_t maxc, maxh, maxs;
|
|
|
|
isa_fdc_get_drive_max_chs(type, &maxc, &maxh, &maxs);
|
|
|
|
dev = aml_device("FLP%c", 'A' + idx);
|
|
|
|
aml_append(dev, aml_name_decl("_ADR", aml_int(idx)));
|
|
|
|
fdi = aml_package(16);
|
|
aml_append(fdi, aml_int(idx)); /* Drive Number */
|
|
aml_append(fdi,
|
|
aml_int(cmos_get_fd_drive_type(type))); /* Device Type */
|
|
/*
|
|
* the values below are the limits of the drive, and are thus independent
|
|
* of the inserted media
|
|
*/
|
|
aml_append(fdi, aml_int(maxc)); /* Maximum Cylinder Number */
|
|
aml_append(fdi, aml_int(maxs)); /* Maximum Sector Number */
|
|
aml_append(fdi, aml_int(maxh)); /* Maximum Head Number */
|
|
/*
|
|
* SeaBIOS returns the below values for int 0x13 func 0x08 regardless of
|
|
* the drive type, so shall we
|
|
*/
|
|
aml_append(fdi, aml_int(0xAF)); /* disk_specify_1 */
|
|
aml_append(fdi, aml_int(0x02)); /* disk_specify_2 */
|
|
aml_append(fdi, aml_int(0x25)); /* disk_motor_wait */
|
|
aml_append(fdi, aml_int(0x02)); /* disk_sector_siz */
|
|
aml_append(fdi, aml_int(0x12)); /* disk_eot */
|
|
aml_append(fdi, aml_int(0x1B)); /* disk_rw_gap */
|
|
aml_append(fdi, aml_int(0xFF)); /* disk_dtl */
|
|
aml_append(fdi, aml_int(0x6C)); /* disk_formt_gap */
|
|
aml_append(fdi, aml_int(0xF6)); /* disk_fill */
|
|
aml_append(fdi, aml_int(0x0F)); /* disk_head_sttl */
|
|
aml_append(fdi, aml_int(0x08)); /* disk_motor_strt */
|
|
|
|
aml_append(dev, aml_name_decl("_FDI", fdi));
|
|
return dev;
|
|
}
|
|
|
|
int cmos_get_fd_drive_type(FloppyDriveType fd0)
|
|
{
|
|
int val;
|
|
|
|
switch (fd0) {
|
|
case FLOPPY_DRIVE_TYPE_144:
|
|
/* 1.44 Mb 3"5 drive */
|
|
val = 4;
|
|
break;
|
|
case FLOPPY_DRIVE_TYPE_288:
|
|
/* 2.88 Mb 3"5 drive */
|
|
val = 5;
|
|
break;
|
|
case FLOPPY_DRIVE_TYPE_120:
|
|
/* 1.2 Mb 5"5 drive */
|
|
val = 2;
|
|
break;
|
|
case FLOPPY_DRIVE_TYPE_NONE:
|
|
default:
|
|
val = 0;
|
|
break;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
static void fdc_isa_build_aml(ISADevice *isadev, Aml *scope)
|
|
{
|
|
Aml *dev;
|
|
Aml *crs;
|
|
int i;
|
|
|
|
#define ACPI_FDE_MAX_FD 4
|
|
uint32_t fde_buf[5] = {
|
|
0, 0, 0, 0, /* presence of floppy drives #0 - #3 */
|
|
cpu_to_le32(2) /* tape presence (2 == never present) */
|
|
};
|
|
|
|
crs = aml_resource_template();
|
|
aml_append(crs, aml_io(AML_DECODE16, 0x03F2, 0x03F2, 0x00, 0x04));
|
|
aml_append(crs, aml_io(AML_DECODE16, 0x03F7, 0x03F7, 0x00, 0x01));
|
|
aml_append(crs, aml_irq_no_flags(6));
|
|
aml_append(crs,
|
|
aml_dma(AML_COMPATIBILITY, AML_NOTBUSMASTER, AML_TRANSFER8, 2));
|
|
|
|
dev = aml_device("FDC0");
|
|
aml_append(dev, aml_name_decl("_HID", aml_eisaid("PNP0700")));
|
|
aml_append(dev, aml_name_decl("_CRS", crs));
|
|
|
|
for (i = 0; i < MIN(MAX_FD, ACPI_FDE_MAX_FD); i++) {
|
|
FloppyDriveType type = isa_fdc_get_drive_type(isadev, i);
|
|
|
|
if (type < FLOPPY_DRIVE_TYPE_NONE) {
|
|
fde_buf[i] = cpu_to_le32(1); /* drive present */
|
|
aml_append(dev, build_fdinfo_aml(i, type));
|
|
}
|
|
}
|
|
aml_append(dev, aml_name_decl("_FDE",
|
|
aml_buffer(sizeof(fde_buf), (uint8_t *)fde_buf)));
|
|
|
|
aml_append(scope, dev);
|
|
}
|
|
|
|
static const VMStateDescription vmstate_isa_fdc ={
|
|
.name = "fdc",
|
|
.version_id = 2,
|
|
.minimum_version_id = 2,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_STRUCT(state, FDCtrlISABus, 0, vmstate_fdc, FDCtrl),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static Property isa_fdc_properties[] = {
|
|
DEFINE_PROP_UINT32("iobase", FDCtrlISABus, iobase, 0x3f0),
|
|
DEFINE_PROP_UINT32("irq", FDCtrlISABus, irq, 6),
|
|
DEFINE_PROP_UINT32("dma", FDCtrlISABus, dma, 2),
|
|
DEFINE_PROP_SIGNED("fdtypeA", FDCtrlISABus, state.qdev_for_drives[0].type,
|
|
FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_SIGNED("fdtypeB", FDCtrlISABus, state.qdev_for_drives[1].type,
|
|
FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_SIGNED("fallback", FDCtrlISABus, state.fallback,
|
|
FLOPPY_DRIVE_TYPE_288, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void isabus_fdc_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
ISADeviceClass *isa = ISA_DEVICE_CLASS(klass);
|
|
|
|
dc->realize = isabus_fdc_realize;
|
|
dc->fw_name = "fdc";
|
|
dc->reset = fdctrl_external_reset_isa;
|
|
dc->vmsd = &vmstate_isa_fdc;
|
|
isa->build_aml = fdc_isa_build_aml;
|
|
device_class_set_props(dc, isa_fdc_properties);
|
|
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
|
|
}
|
|
|
|
static void isabus_fdc_instance_init(Object *obj)
|
|
{
|
|
FDCtrlISABus *isa = ISA_FDC(obj);
|
|
|
|
device_add_bootindex_property(obj, &isa->bootindexA,
|
|
"bootindexA", "/floppy@0",
|
|
DEVICE(obj));
|
|
device_add_bootindex_property(obj, &isa->bootindexB,
|
|
"bootindexB", "/floppy@1",
|
|
DEVICE(obj));
|
|
}
|
|
|
|
static const TypeInfo isa_fdc_info = {
|
|
.name = TYPE_ISA_FDC,
|
|
.parent = TYPE_ISA_DEVICE,
|
|
.instance_size = sizeof(FDCtrlISABus),
|
|
.class_init = isabus_fdc_class_init,
|
|
.instance_init = isabus_fdc_instance_init,
|
|
};
|
|
|
|
static const VMStateDescription vmstate_sysbus_fdc ={
|
|
.name = "fdc",
|
|
.version_id = 2,
|
|
.minimum_version_id = 2,
|
|
.fields = (VMStateField[]) {
|
|
VMSTATE_STRUCT(state, FDCtrlSysBus, 0, vmstate_fdc, FDCtrl),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static Property sysbus_fdc_properties[] = {
|
|
DEFINE_PROP_SIGNED("fdtypeA", FDCtrlSysBus, state.qdev_for_drives[0].type,
|
|
FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_SIGNED("fdtypeB", FDCtrlSysBus, state.qdev_for_drives[1].type,
|
|
FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_SIGNED("fallback", FDCtrlISABus, state.fallback,
|
|
FLOPPY_DRIVE_TYPE_144, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void sysbus_fdc_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
device_class_set_props(dc, sysbus_fdc_properties);
|
|
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
|
|
}
|
|
|
|
static const TypeInfo sysbus_fdc_info = {
|
|
.name = "sysbus-fdc",
|
|
.parent = TYPE_SYSBUS_FDC,
|
|
.instance_init = sysbus_fdc_initfn,
|
|
.class_init = sysbus_fdc_class_init,
|
|
};
|
|
|
|
static Property sun4m_fdc_properties[] = {
|
|
DEFINE_PROP_SIGNED("fdtype", FDCtrlSysBus, state.qdev_for_drives[0].type,
|
|
FLOPPY_DRIVE_TYPE_AUTO, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_SIGNED("fallback", FDCtrlISABus, state.fallback,
|
|
FLOPPY_DRIVE_TYPE_144, qdev_prop_fdc_drive_type,
|
|
FloppyDriveType),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void sun4m_fdc_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
device_class_set_props(dc, sun4m_fdc_properties);
|
|
set_bit(DEVICE_CATEGORY_STORAGE, dc->categories);
|
|
}
|
|
|
|
static const TypeInfo sun4m_fdc_info = {
|
|
.name = "sun-fdtwo",
|
|
.parent = TYPE_SYSBUS_FDC,
|
|
.instance_init = sun4m_fdc_initfn,
|
|
.class_init = sun4m_fdc_class_init,
|
|
};
|
|
|
|
static void sysbus_fdc_common_class_init(ObjectClass *klass, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(klass);
|
|
|
|
dc->realize = sysbus_fdc_common_realize;
|
|
dc->reset = fdctrl_external_reset_sysbus;
|
|
dc->vmsd = &vmstate_sysbus_fdc;
|
|
}
|
|
|
|
static const TypeInfo sysbus_fdc_type_info = {
|
|
.name = TYPE_SYSBUS_FDC,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(FDCtrlSysBus),
|
|
.instance_init = sysbus_fdc_common_initfn,
|
|
.abstract = true,
|
|
.class_init = sysbus_fdc_common_class_init,
|
|
};
|
|
|
|
static void fdc_register_types(void)
|
|
{
|
|
type_register_static(&isa_fdc_info);
|
|
type_register_static(&sysbus_fdc_type_info);
|
|
type_register_static(&sysbus_fdc_info);
|
|
type_register_static(&sun4m_fdc_info);
|
|
type_register_static(&floppy_bus_info);
|
|
type_register_static(&floppy_drive_info);
|
|
}
|
|
|
|
type_init(fdc_register_types)
|