This sets a default PCI subsystem ID for all emulated PCI devices. PCI specs require this, so do it. In many cases it is enougth to know the PCI ID to handle a device correctly. Sometimes a device driver must identify the exact piece of hardware (via PCI Subsystem ID) though. What does this patch to qemu devices: Right now the emulated PCI devices have no PCI subsystem ID, only the PCI ID. The discussed patch sets a default PCI subsystem ID for all emulated devices. Which will make the qemu devices look pretty much like in the laptop case: all PCI subsystem IDs will point to qemu by default. If a driver emulates a very specific piece of hardware where it has to emulate more than just the PCI chip, it can overwrite the PCI subsystem ID without problems. The es1370 driver does that for example. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5986 c046a42c-6fe2-441c-8c8c-71466251a162
714 lines
21 KiB
C
714 lines
21 KiB
C
/*
|
|
* QEMU PCI bus manager
|
|
*
|
|
* Copyright (c) 2004 Fabrice Bellard
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
#include "hw.h"
|
|
#include "pci.h"
|
|
#include "console.h"
|
|
#include "net.h"
|
|
|
|
//#define DEBUG_PCI
|
|
|
|
struct PCIBus {
|
|
int bus_num;
|
|
int devfn_min;
|
|
pci_set_irq_fn set_irq;
|
|
pci_map_irq_fn map_irq;
|
|
uint32_t config_reg; /* XXX: suppress */
|
|
/* low level pic */
|
|
SetIRQFunc *low_set_irq;
|
|
qemu_irq *irq_opaque;
|
|
PCIDevice *devices[256];
|
|
PCIDevice *parent_dev;
|
|
PCIBus *next;
|
|
/* The bus IRQ state is the logical OR of the connected devices.
|
|
Keep a count of the number of devices with raised IRQs. */
|
|
int nirq;
|
|
int irq_count[];
|
|
};
|
|
|
|
static void pci_update_mappings(PCIDevice *d);
|
|
static void pci_set_irq(void *opaque, int irq_num, int level);
|
|
|
|
target_phys_addr_t pci_mem_base;
|
|
static uint16_t pci_default_sub_vendor_id = PCI_SUBVENDOR_ID_REDHAT_QUMRANET;
|
|
static uint16_t pci_default_sub_device_id = PCI_SUBDEVICE_ID_QEMU;
|
|
static int pci_irq_index;
|
|
static PCIBus *first_bus;
|
|
|
|
static void pcibus_save(QEMUFile *f, void *opaque)
|
|
{
|
|
PCIBus *bus = (PCIBus *)opaque;
|
|
int i;
|
|
|
|
qemu_put_be32(f, bus->nirq);
|
|
for (i = 0; i < bus->nirq; i++)
|
|
qemu_put_be32(f, bus->irq_count[i]);
|
|
}
|
|
|
|
static int pcibus_load(QEMUFile *f, void *opaque, int version_id)
|
|
{
|
|
PCIBus *bus = (PCIBus *)opaque;
|
|
int i, nirq;
|
|
|
|
if (version_id != 1)
|
|
return -EINVAL;
|
|
|
|
nirq = qemu_get_be32(f);
|
|
if (bus->nirq != nirq) {
|
|
fprintf(stderr, "pcibus_load: nirq mismatch: src=%d dst=%d\n",
|
|
nirq, bus->nirq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
for (i = 0; i < nirq; i++)
|
|
bus->irq_count[i] = qemu_get_be32(f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
PCIBus *pci_register_bus(pci_set_irq_fn set_irq, pci_map_irq_fn map_irq,
|
|
qemu_irq *pic, int devfn_min, int nirq)
|
|
{
|
|
PCIBus *bus;
|
|
static int nbus = 0;
|
|
|
|
bus = qemu_mallocz(sizeof(PCIBus) + (nirq * sizeof(int)));
|
|
bus->set_irq = set_irq;
|
|
bus->map_irq = map_irq;
|
|
bus->irq_opaque = pic;
|
|
bus->devfn_min = devfn_min;
|
|
bus->nirq = nirq;
|
|
first_bus = bus;
|
|
register_savevm("PCIBUS", nbus++, 1, pcibus_save, pcibus_load, bus);
|
|
return bus;
|
|
}
|
|
|
|
static PCIBus *pci_register_secondary_bus(PCIDevice *dev, pci_map_irq_fn map_irq)
|
|
{
|
|
PCIBus *bus;
|
|
bus = qemu_mallocz(sizeof(PCIBus));
|
|
bus->map_irq = map_irq;
|
|
bus->parent_dev = dev;
|
|
bus->next = dev->bus->next;
|
|
dev->bus->next = bus;
|
|
return bus;
|
|
}
|
|
|
|
int pci_bus_num(PCIBus *s)
|
|
{
|
|
return s->bus_num;
|
|
}
|
|
|
|
void pci_device_save(PCIDevice *s, QEMUFile *f)
|
|
{
|
|
int i;
|
|
|
|
qemu_put_be32(f, 2); /* PCI device version */
|
|
qemu_put_buffer(f, s->config, 256);
|
|
for (i = 0; i < 4; i++)
|
|
qemu_put_be32(f, s->irq_state[i]);
|
|
}
|
|
|
|
int pci_device_load(PCIDevice *s, QEMUFile *f)
|
|
{
|
|
uint32_t version_id;
|
|
int i;
|
|
|
|
version_id = qemu_get_be32(f);
|
|
if (version_id > 2)
|
|
return -EINVAL;
|
|
qemu_get_buffer(f, s->config, 256);
|
|
pci_update_mappings(s);
|
|
|
|
if (version_id >= 2)
|
|
for (i = 0; i < 4; i ++)
|
|
s->irq_state[i] = qemu_get_be32(f);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pci_set_default_subsystem_id(PCIDevice *pci_dev)
|
|
{
|
|
uint16_t *id;
|
|
|
|
id = (void*)(&pci_dev->config[PCI_SUBVENDOR_ID]);
|
|
id[0] = cpu_to_le16(pci_default_sub_vendor_id);
|
|
id[1] = cpu_to_le16(pci_default_sub_device_id);
|
|
return 0;
|
|
}
|
|
|
|
/* -1 for devfn means auto assign */
|
|
PCIDevice *pci_register_device(PCIBus *bus, const char *name,
|
|
int instance_size, int devfn,
|
|
PCIConfigReadFunc *config_read,
|
|
PCIConfigWriteFunc *config_write)
|
|
{
|
|
PCIDevice *pci_dev;
|
|
|
|
if (pci_irq_index >= PCI_DEVICES_MAX)
|
|
return NULL;
|
|
|
|
if (devfn < 0) {
|
|
for(devfn = bus->devfn_min ; devfn < 256; devfn += 8) {
|
|
if (!bus->devices[devfn])
|
|
goto found;
|
|
}
|
|
return NULL;
|
|
found: ;
|
|
}
|
|
pci_dev = qemu_mallocz(instance_size);
|
|
if (!pci_dev)
|
|
return NULL;
|
|
pci_dev->bus = bus;
|
|
pci_dev->devfn = devfn;
|
|
pstrcpy(pci_dev->name, sizeof(pci_dev->name), name);
|
|
memset(pci_dev->irq_state, 0, sizeof(pci_dev->irq_state));
|
|
pci_set_default_subsystem_id(pci_dev);
|
|
|
|
if (!config_read)
|
|
config_read = pci_default_read_config;
|
|
if (!config_write)
|
|
config_write = pci_default_write_config;
|
|
pci_dev->config_read = config_read;
|
|
pci_dev->config_write = config_write;
|
|
pci_dev->irq_index = pci_irq_index++;
|
|
bus->devices[devfn] = pci_dev;
|
|
pci_dev->irq = qemu_allocate_irqs(pci_set_irq, pci_dev, 4);
|
|
return pci_dev;
|
|
}
|
|
|
|
void pci_register_io_region(PCIDevice *pci_dev, int region_num,
|
|
uint32_t size, int type,
|
|
PCIMapIORegionFunc *map_func)
|
|
{
|
|
PCIIORegion *r;
|
|
uint32_t addr;
|
|
|
|
if ((unsigned int)region_num >= PCI_NUM_REGIONS)
|
|
return;
|
|
r = &pci_dev->io_regions[region_num];
|
|
r->addr = -1;
|
|
r->size = size;
|
|
r->type = type;
|
|
r->map_func = map_func;
|
|
if (region_num == PCI_ROM_SLOT) {
|
|
addr = 0x30;
|
|
} else {
|
|
addr = 0x10 + region_num * 4;
|
|
}
|
|
*(uint32_t *)(pci_dev->config + addr) = cpu_to_le32(type);
|
|
}
|
|
|
|
static target_phys_addr_t pci_to_cpu_addr(target_phys_addr_t addr)
|
|
{
|
|
return addr + pci_mem_base;
|
|
}
|
|
|
|
static void pci_update_mappings(PCIDevice *d)
|
|
{
|
|
PCIIORegion *r;
|
|
int cmd, i;
|
|
uint32_t last_addr, new_addr, config_ofs;
|
|
|
|
cmd = le16_to_cpu(*(uint16_t *)(d->config + PCI_COMMAND));
|
|
for(i = 0; i < PCI_NUM_REGIONS; i++) {
|
|
r = &d->io_regions[i];
|
|
if (i == PCI_ROM_SLOT) {
|
|
config_ofs = 0x30;
|
|
} else {
|
|
config_ofs = 0x10 + i * 4;
|
|
}
|
|
if (r->size != 0) {
|
|
if (r->type & PCI_ADDRESS_SPACE_IO) {
|
|
if (cmd & PCI_COMMAND_IO) {
|
|
new_addr = le32_to_cpu(*(uint32_t *)(d->config +
|
|
config_ofs));
|
|
new_addr = new_addr & ~(r->size - 1);
|
|
last_addr = new_addr + r->size - 1;
|
|
/* NOTE: we have only 64K ioports on PC */
|
|
if (last_addr <= new_addr || new_addr == 0 ||
|
|
last_addr >= 0x10000) {
|
|
new_addr = -1;
|
|
}
|
|
} else {
|
|
new_addr = -1;
|
|
}
|
|
} else {
|
|
if (cmd & PCI_COMMAND_MEMORY) {
|
|
new_addr = le32_to_cpu(*(uint32_t *)(d->config +
|
|
config_ofs));
|
|
/* the ROM slot has a specific enable bit */
|
|
if (i == PCI_ROM_SLOT && !(new_addr & 1))
|
|
goto no_mem_map;
|
|
new_addr = new_addr & ~(r->size - 1);
|
|
last_addr = new_addr + r->size - 1;
|
|
/* NOTE: we do not support wrapping */
|
|
/* XXX: as we cannot support really dynamic
|
|
mappings, we handle specific values as invalid
|
|
mappings. */
|
|
if (last_addr <= new_addr || new_addr == 0 ||
|
|
last_addr == -1) {
|
|
new_addr = -1;
|
|
}
|
|
} else {
|
|
no_mem_map:
|
|
new_addr = -1;
|
|
}
|
|
}
|
|
/* now do the real mapping */
|
|
if (new_addr != r->addr) {
|
|
if (r->addr != -1) {
|
|
if (r->type & PCI_ADDRESS_SPACE_IO) {
|
|
int class;
|
|
/* NOTE: specific hack for IDE in PC case:
|
|
only one byte must be mapped. */
|
|
class = d->config[0x0a] | (d->config[0x0b] << 8);
|
|
if (class == 0x0101 && r->size == 4) {
|
|
isa_unassign_ioport(r->addr + 2, 1);
|
|
} else {
|
|
isa_unassign_ioport(r->addr, r->size);
|
|
}
|
|
} else {
|
|
cpu_register_physical_memory(pci_to_cpu_addr(r->addr),
|
|
r->size,
|
|
IO_MEM_UNASSIGNED);
|
|
qemu_unregister_coalesced_mmio(r->addr, r->size);
|
|
}
|
|
}
|
|
r->addr = new_addr;
|
|
if (r->addr != -1) {
|
|
r->map_func(d, i, r->addr, r->size, r->type);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
uint32_t pci_default_read_config(PCIDevice *d,
|
|
uint32_t address, int len)
|
|
{
|
|
uint32_t val;
|
|
|
|
switch(len) {
|
|
default:
|
|
case 4:
|
|
if (address <= 0xfc) {
|
|
val = le32_to_cpu(*(uint32_t *)(d->config + address));
|
|
break;
|
|
}
|
|
/* fall through */
|
|
case 2:
|
|
if (address <= 0xfe) {
|
|
val = le16_to_cpu(*(uint16_t *)(d->config + address));
|
|
break;
|
|
}
|
|
/* fall through */
|
|
case 1:
|
|
val = d->config[address];
|
|
break;
|
|
}
|
|
return val;
|
|
}
|
|
|
|
void pci_default_write_config(PCIDevice *d,
|
|
uint32_t address, uint32_t val, int len)
|
|
{
|
|
int can_write, i;
|
|
uint32_t end, addr;
|
|
|
|
if (len == 4 && ((address >= 0x10 && address < 0x10 + 4 * 6) ||
|
|
(address >= 0x30 && address < 0x34))) {
|
|
PCIIORegion *r;
|
|
int reg;
|
|
|
|
if ( address >= 0x30 ) {
|
|
reg = PCI_ROM_SLOT;
|
|
}else{
|
|
reg = (address - 0x10) >> 2;
|
|
}
|
|
r = &d->io_regions[reg];
|
|
if (r->size == 0)
|
|
goto default_config;
|
|
/* compute the stored value */
|
|
if (reg == PCI_ROM_SLOT) {
|
|
/* keep ROM enable bit */
|
|
val &= (~(r->size - 1)) | 1;
|
|
} else {
|
|
val &= ~(r->size - 1);
|
|
val |= r->type;
|
|
}
|
|
*(uint32_t *)(d->config + address) = cpu_to_le32(val);
|
|
pci_update_mappings(d);
|
|
return;
|
|
}
|
|
default_config:
|
|
/* not efficient, but simple */
|
|
addr = address;
|
|
for(i = 0; i < len; i++) {
|
|
/* default read/write accesses */
|
|
switch(d->config[0x0e]) {
|
|
case 0x00:
|
|
case 0x80:
|
|
switch(addr) {
|
|
case 0x00:
|
|
case 0x01:
|
|
case 0x02:
|
|
case 0x03:
|
|
case 0x08:
|
|
case 0x09:
|
|
case 0x0a:
|
|
case 0x0b:
|
|
case 0x0e:
|
|
case 0x10 ... 0x27: /* base */
|
|
case 0x30 ... 0x33: /* rom */
|
|
case 0x3d:
|
|
can_write = 0;
|
|
break;
|
|
default:
|
|
can_write = 1;
|
|
break;
|
|
}
|
|
break;
|
|
default:
|
|
case 0x01:
|
|
switch(addr) {
|
|
case 0x00:
|
|
case 0x01:
|
|
case 0x02:
|
|
case 0x03:
|
|
case 0x08:
|
|
case 0x09:
|
|
case 0x0a:
|
|
case 0x0b:
|
|
case 0x0e:
|
|
case 0x38 ... 0x3b: /* rom */
|
|
case 0x3d:
|
|
can_write = 0;
|
|
break;
|
|
default:
|
|
can_write = 1;
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
if (can_write) {
|
|
d->config[addr] = val;
|
|
}
|
|
if (++addr > 0xff)
|
|
break;
|
|
val >>= 8;
|
|
}
|
|
|
|
end = address + len;
|
|
if (end > PCI_COMMAND && address < (PCI_COMMAND + 2)) {
|
|
/* if the command register is modified, we must modify the mappings */
|
|
pci_update_mappings(d);
|
|
}
|
|
}
|
|
|
|
void pci_data_write(void *opaque, uint32_t addr, uint32_t val, int len)
|
|
{
|
|
PCIBus *s = opaque;
|
|
PCIDevice *pci_dev;
|
|
int config_addr, bus_num;
|
|
|
|
#if defined(DEBUG_PCI) && 0
|
|
printf("pci_data_write: addr=%08x val=%08x len=%d\n",
|
|
addr, val, len);
|
|
#endif
|
|
bus_num = (addr >> 16) & 0xff;
|
|
while (s && s->bus_num != bus_num)
|
|
s = s->next;
|
|
if (!s)
|
|
return;
|
|
pci_dev = s->devices[(addr >> 8) & 0xff];
|
|
if (!pci_dev)
|
|
return;
|
|
config_addr = addr & 0xff;
|
|
#if defined(DEBUG_PCI)
|
|
printf("pci_config_write: %s: addr=%02x val=%08x len=%d\n",
|
|
pci_dev->name, config_addr, val, len);
|
|
#endif
|
|
pci_dev->config_write(pci_dev, config_addr, val, len);
|
|
}
|
|
|
|
uint32_t pci_data_read(void *opaque, uint32_t addr, int len)
|
|
{
|
|
PCIBus *s = opaque;
|
|
PCIDevice *pci_dev;
|
|
int config_addr, bus_num;
|
|
uint32_t val;
|
|
|
|
bus_num = (addr >> 16) & 0xff;
|
|
while (s && s->bus_num != bus_num)
|
|
s= s->next;
|
|
if (!s)
|
|
goto fail;
|
|
pci_dev = s->devices[(addr >> 8) & 0xff];
|
|
if (!pci_dev) {
|
|
fail:
|
|
switch(len) {
|
|
case 1:
|
|
val = 0xff;
|
|
break;
|
|
case 2:
|
|
val = 0xffff;
|
|
break;
|
|
default:
|
|
case 4:
|
|
val = 0xffffffff;
|
|
break;
|
|
}
|
|
goto the_end;
|
|
}
|
|
config_addr = addr & 0xff;
|
|
val = pci_dev->config_read(pci_dev, config_addr, len);
|
|
#if defined(DEBUG_PCI)
|
|
printf("pci_config_read: %s: addr=%02x val=%08x len=%d\n",
|
|
pci_dev->name, config_addr, val, len);
|
|
#endif
|
|
the_end:
|
|
#if defined(DEBUG_PCI) && 0
|
|
printf("pci_data_read: addr=%08x val=%08x len=%d\n",
|
|
addr, val, len);
|
|
#endif
|
|
return val;
|
|
}
|
|
|
|
/***********************************************************/
|
|
/* generic PCI irq support */
|
|
|
|
/* 0 <= irq_num <= 3. level must be 0 or 1 */
|
|
static void pci_set_irq(void *opaque, int irq_num, int level)
|
|
{
|
|
PCIDevice *pci_dev = (PCIDevice *)opaque;
|
|
PCIBus *bus;
|
|
int change;
|
|
|
|
change = level - pci_dev->irq_state[irq_num];
|
|
if (!change)
|
|
return;
|
|
|
|
pci_dev->irq_state[irq_num] = level;
|
|
for (;;) {
|
|
bus = pci_dev->bus;
|
|
irq_num = bus->map_irq(pci_dev, irq_num);
|
|
if (bus->set_irq)
|
|
break;
|
|
pci_dev = bus->parent_dev;
|
|
}
|
|
bus->irq_count[irq_num] += change;
|
|
bus->set_irq(bus->irq_opaque, irq_num, bus->irq_count[irq_num] != 0);
|
|
}
|
|
|
|
/***********************************************************/
|
|
/* monitor info on PCI */
|
|
|
|
typedef struct {
|
|
uint16_t class;
|
|
const char *desc;
|
|
} pci_class_desc;
|
|
|
|
static const pci_class_desc pci_class_descriptions[] =
|
|
{
|
|
{ 0x0100, "SCSI controller"},
|
|
{ 0x0101, "IDE controller"},
|
|
{ 0x0102, "Floppy controller"},
|
|
{ 0x0103, "IPI controller"},
|
|
{ 0x0104, "RAID controller"},
|
|
{ 0x0106, "SATA controller"},
|
|
{ 0x0107, "SAS controller"},
|
|
{ 0x0180, "Storage controller"},
|
|
{ 0x0200, "Ethernet controller"},
|
|
{ 0x0201, "Token Ring controller"},
|
|
{ 0x0202, "FDDI controller"},
|
|
{ 0x0203, "ATM controller"},
|
|
{ 0x0280, "Network controller"},
|
|
{ 0x0300, "VGA controller"},
|
|
{ 0x0301, "XGA controller"},
|
|
{ 0x0302, "3D controller"},
|
|
{ 0x0380, "Display controller"},
|
|
{ 0x0400, "Video controller"},
|
|
{ 0x0401, "Audio controller"},
|
|
{ 0x0402, "Phone"},
|
|
{ 0x0480, "Multimedia controller"},
|
|
{ 0x0500, "RAM controller"},
|
|
{ 0x0501, "Flash controller"},
|
|
{ 0x0580, "Memory controller"},
|
|
{ 0x0600, "Host bridge"},
|
|
{ 0x0601, "ISA bridge"},
|
|
{ 0x0602, "EISA bridge"},
|
|
{ 0x0603, "MC bridge"},
|
|
{ 0x0604, "PCI bridge"},
|
|
{ 0x0605, "PCMCIA bridge"},
|
|
{ 0x0606, "NUBUS bridge"},
|
|
{ 0x0607, "CARDBUS bridge"},
|
|
{ 0x0608, "RACEWAY bridge"},
|
|
{ 0x0680, "Bridge"},
|
|
{ 0x0c03, "USB controller"},
|
|
{ 0, NULL}
|
|
};
|
|
|
|
static void pci_info_device(PCIDevice *d)
|
|
{
|
|
int i, class;
|
|
PCIIORegion *r;
|
|
const pci_class_desc *desc;
|
|
|
|
term_printf(" Bus %2d, device %3d, function %d:\n",
|
|
d->bus->bus_num, d->devfn >> 3, d->devfn & 7);
|
|
class = le16_to_cpu(*((uint16_t *)(d->config + PCI_CLASS_DEVICE)));
|
|
term_printf(" ");
|
|
desc = pci_class_descriptions;
|
|
while (desc->desc && class != desc->class)
|
|
desc++;
|
|
if (desc->desc) {
|
|
term_printf("%s", desc->desc);
|
|
} else {
|
|
term_printf("Class %04x", class);
|
|
}
|
|
term_printf(": PCI device %04x:%04x\n",
|
|
le16_to_cpu(*((uint16_t *)(d->config + PCI_VENDOR_ID))),
|
|
le16_to_cpu(*((uint16_t *)(d->config + PCI_DEVICE_ID))));
|
|
|
|
if (d->config[PCI_INTERRUPT_PIN] != 0) {
|
|
term_printf(" IRQ %d.\n", d->config[PCI_INTERRUPT_LINE]);
|
|
}
|
|
if (class == 0x0604) {
|
|
term_printf(" BUS %d.\n", d->config[0x19]);
|
|
}
|
|
for(i = 0;i < PCI_NUM_REGIONS; i++) {
|
|
r = &d->io_regions[i];
|
|
if (r->size != 0) {
|
|
term_printf(" BAR%d: ", i);
|
|
if (r->type & PCI_ADDRESS_SPACE_IO) {
|
|
term_printf("I/O at 0x%04x [0x%04x].\n",
|
|
r->addr, r->addr + r->size - 1);
|
|
} else {
|
|
term_printf("32 bit memory at 0x%08x [0x%08x].\n",
|
|
r->addr, r->addr + r->size - 1);
|
|
}
|
|
}
|
|
}
|
|
if (class == 0x0604 && d->config[0x19] != 0) {
|
|
pci_for_each_device(d->config[0x19], pci_info_device);
|
|
}
|
|
}
|
|
|
|
void pci_for_each_device(int bus_num, void (*fn)(PCIDevice *d))
|
|
{
|
|
PCIBus *bus = first_bus;
|
|
PCIDevice *d;
|
|
int devfn;
|
|
|
|
while (bus && bus->bus_num != bus_num)
|
|
bus = bus->next;
|
|
if (bus) {
|
|
for(devfn = 0; devfn < 256; devfn++) {
|
|
d = bus->devices[devfn];
|
|
if (d)
|
|
fn(d);
|
|
}
|
|
}
|
|
}
|
|
|
|
void pci_info(void)
|
|
{
|
|
pci_for_each_device(0, pci_info_device);
|
|
}
|
|
|
|
/* Initialize a PCI NIC. */
|
|
void pci_nic_init(PCIBus *bus, NICInfo *nd, int devfn)
|
|
{
|
|
if (strcmp(nd->model, "ne2k_pci") == 0) {
|
|
pci_ne2000_init(bus, nd, devfn);
|
|
} else if (strcmp(nd->model, "i82551") == 0) {
|
|
pci_i82551_init(bus, nd, devfn);
|
|
} else if (strcmp(nd->model, "i82557b") == 0) {
|
|
pci_i82557b_init(bus, nd, devfn);
|
|
} else if (strcmp(nd->model, "i82559er") == 0) {
|
|
pci_i82559er_init(bus, nd, devfn);
|
|
} else if (strcmp(nd->model, "rtl8139") == 0) {
|
|
pci_rtl8139_init(bus, nd, devfn);
|
|
} else if (strcmp(nd->model, "e1000") == 0) {
|
|
pci_e1000_init(bus, nd, devfn);
|
|
} else if (strcmp(nd->model, "pcnet") == 0) {
|
|
pci_pcnet_init(bus, nd, devfn);
|
|
} else if (strcmp(nd->model, "?") == 0) {
|
|
fprintf(stderr, "qemu: Supported PCI NICs: i82551 i82557b i82559er"
|
|
" ne2k_pci pcnet rtl8139 e1000\n");
|
|
exit (1);
|
|
} else {
|
|
fprintf(stderr, "qemu: Unsupported NIC: %s\n", nd->model);
|
|
exit (1);
|
|
}
|
|
}
|
|
|
|
typedef struct {
|
|
PCIDevice dev;
|
|
PCIBus *bus;
|
|
} PCIBridge;
|
|
|
|
static void pci_bridge_write_config(PCIDevice *d,
|
|
uint32_t address, uint32_t val, int len)
|
|
{
|
|
PCIBridge *s = (PCIBridge *)d;
|
|
|
|
if (address == 0x19 || (address == 0x18 && len > 1)) {
|
|
if (address == 0x19)
|
|
s->bus->bus_num = val & 0xff;
|
|
else
|
|
s->bus->bus_num = (val >> 8) & 0xff;
|
|
#if defined(DEBUG_PCI)
|
|
printf ("pci-bridge: %s: Assigned bus %d\n", d->name, s->bus->bus_num);
|
|
#endif
|
|
}
|
|
pci_default_write_config(d, address, val, len);
|
|
}
|
|
|
|
PCIBus *pci_bridge_init(PCIBus *bus, int devfn, uint32_t id,
|
|
pci_map_irq_fn map_irq, const char *name)
|
|
{
|
|
PCIBridge *s;
|
|
s = (PCIBridge *)pci_register_device(bus, name, sizeof(PCIBridge),
|
|
devfn, NULL, pci_bridge_write_config);
|
|
s->dev.config[0x00] = id >> 16;
|
|
s->dev.config[0x01] = id >> 24;
|
|
s->dev.config[0x02] = id; // device_id
|
|
s->dev.config[0x03] = id >> 8;
|
|
s->dev.config[0x04] = 0x06; // command = bus master, pci mem
|
|
s->dev.config[0x05] = 0x00;
|
|
s->dev.config[0x06] = 0xa0; // status = fast back-to-back, 66MHz, no error
|
|
s->dev.config[0x07] = 0x00; // status = fast devsel
|
|
s->dev.config[0x08] = 0x00; // revision
|
|
s->dev.config[0x09] = 0x00; // programming i/f
|
|
s->dev.config[0x0A] = 0x04; // class_sub = PCI to PCI bridge
|
|
s->dev.config[0x0B] = 0x06; // class_base = PCI_bridge
|
|
s->dev.config[0x0D] = 0x10; // latency_timer
|
|
s->dev.config[0x0E] = 0x81; // header_type
|
|
s->dev.config[0x1E] = 0xa0; // secondary status
|
|
|
|
s->bus = pci_register_secondary_bus(&s->dev, map_irq);
|
|
return s->bus;
|
|
}
|