The only way object_property_add() can fail is when a property with the same name already exists. Since our property names are all hardcoded, failure is a programming error, and the appropriate way to handle it is passing &error_abort. Same for its variants, except for object_property_add_child(), which additionally fails when the child already has a parent. Parentage is also under program control, so this is a programming error, too. We have a bit over 500 callers. Almost half of them pass &error_abort, slightly fewer ignore errors, one test case handles errors, and the remaining few callers pass them to their own callers. The previous few commits demonstrated once again that ignoring programming errors is a bad idea. Of the few ones that pass on errors, several violate the Error API. The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. ich9_pm_add_properties(), sparc32_ledma_realize(), sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize() are wrong that way. When the one appropriate choice of argument is &error_abort, letting users pick the argument is a bad idea. Drop parameter @errp and assert the preconditions instead. There's one exception to "duplicate property name is a programming error": the way object_property_add() implements the magic (and undocumented) "automatic arrayification". Don't drop @errp there. Instead, rename object_property_add() to object_property_try_add(), and add the obvious wrapper object_property_add(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200505152926.18877-15-armbru@redhat.com> [Two semantic rebase conflicts resolved]
464 lines
15 KiB
C
464 lines
15 KiB
C
|
|
/*
|
|
* QEMU OldWorld PowerMac (currently ~G3 Beige) hardware System Emulator
|
|
*
|
|
* Copyright (c) 2004-2007 Fabrice Bellard
|
|
* Copyright (c) 2007 Jocelyn Mayer
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu-common.h"
|
|
#include "qemu/units.h"
|
|
#include "qapi/error.h"
|
|
#include "hw/ppc/ppc.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "mac.h"
|
|
#include "hw/input/adb.h"
|
|
#include "sysemu/sysemu.h"
|
|
#include "net/net.h"
|
|
#include "hw/isa/isa.h"
|
|
#include "hw/pci/pci.h"
|
|
#include "hw/pci/pci_host.h"
|
|
#include "hw/boards.h"
|
|
#include "hw/nvram/fw_cfg.h"
|
|
#include "hw/char/escc.h"
|
|
#include "hw/misc/macio/macio.h"
|
|
#include "hw/loader.h"
|
|
#include "hw/fw-path-provider.h"
|
|
#include "elf.h"
|
|
#include "qemu/error-report.h"
|
|
#include "sysemu/kvm.h"
|
|
#include "sysemu/reset.h"
|
|
#include "kvm_ppc.h"
|
|
#include "exec/address-spaces.h"
|
|
|
|
#define MAX_IDE_BUS 2
|
|
#define CFG_ADDR 0xf0000510
|
|
#define TBFREQ 16600000UL
|
|
#define CLOCKFREQ 266000000UL
|
|
#define BUSFREQ 66000000UL
|
|
|
|
#define NDRV_VGA_FILENAME "qemu_vga.ndrv"
|
|
|
|
#define GRACKLE_BASE 0xfec00000
|
|
|
|
static void fw_cfg_boot_set(void *opaque, const char *boot_device,
|
|
Error **errp)
|
|
{
|
|
fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]);
|
|
}
|
|
|
|
static uint64_t translate_kernel_address(void *opaque, uint64_t addr)
|
|
{
|
|
return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR;
|
|
}
|
|
|
|
static void ppc_heathrow_reset(void *opaque)
|
|
{
|
|
PowerPCCPU *cpu = opaque;
|
|
|
|
cpu_reset(CPU(cpu));
|
|
}
|
|
|
|
static void ppc_heathrow_init(MachineState *machine)
|
|
{
|
|
ram_addr_t ram_size = machine->ram_size;
|
|
const char *kernel_filename = machine->kernel_filename;
|
|
const char *kernel_cmdline = machine->kernel_cmdline;
|
|
const char *initrd_filename = machine->initrd_filename;
|
|
const char *boot_device = machine->boot_order;
|
|
MemoryRegion *sysmem = get_system_memory();
|
|
PowerPCCPU *cpu = NULL;
|
|
CPUPPCState *env = NULL;
|
|
char *filename;
|
|
int linux_boot, i;
|
|
MemoryRegion *bios = g_new(MemoryRegion, 1);
|
|
uint32_t kernel_base, initrd_base, cmdline_base = 0;
|
|
int32_t kernel_size, initrd_size;
|
|
PCIBus *pci_bus;
|
|
OldWorldMacIOState *macio;
|
|
MACIOIDEState *macio_ide;
|
|
SysBusDevice *s;
|
|
DeviceState *dev, *pic_dev;
|
|
BusState *adb_bus;
|
|
int bios_size;
|
|
unsigned int smp_cpus = machine->smp.cpus;
|
|
uint16_t ppc_boot_device;
|
|
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
|
|
void *fw_cfg;
|
|
uint64_t tbfreq;
|
|
|
|
linux_boot = (kernel_filename != NULL);
|
|
|
|
/* init CPUs */
|
|
for (i = 0; i < smp_cpus; i++) {
|
|
cpu = POWERPC_CPU(cpu_create(machine->cpu_type));
|
|
env = &cpu->env;
|
|
|
|
/* Set time-base frequency to 16.6 Mhz */
|
|
cpu_ppc_tb_init(env, TBFREQ);
|
|
qemu_register_reset(ppc_heathrow_reset, cpu);
|
|
}
|
|
|
|
/* allocate RAM */
|
|
if (ram_size > 2047 * MiB) {
|
|
error_report("Too much memory for this machine: %" PRId64 " MB, "
|
|
"maximum 2047 MB", ram_size / MiB);
|
|
exit(1);
|
|
}
|
|
|
|
memory_region_add_subregion(sysmem, 0, machine->ram);
|
|
|
|
/* allocate and load BIOS */
|
|
memory_region_init_rom(bios, NULL, "ppc_heathrow.bios", BIOS_SIZE,
|
|
&error_fatal);
|
|
|
|
if (bios_name == NULL)
|
|
bios_name = PROM_FILENAME;
|
|
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
|
|
memory_region_add_subregion(sysmem, PROM_ADDR, bios);
|
|
|
|
/* Load OpenBIOS (ELF) */
|
|
if (filename) {
|
|
bios_size = load_elf(filename, NULL, 0, NULL, NULL, NULL, NULL, NULL,
|
|
1, PPC_ELF_MACHINE, 0, 0);
|
|
g_free(filename);
|
|
} else {
|
|
bios_size = -1;
|
|
}
|
|
if (bios_size < 0 || bios_size > BIOS_SIZE) {
|
|
error_report("could not load PowerPC bios '%s'", bios_name);
|
|
exit(1);
|
|
}
|
|
|
|
if (linux_boot) {
|
|
uint64_t lowaddr = 0;
|
|
int bswap_needed;
|
|
|
|
#ifdef BSWAP_NEEDED
|
|
bswap_needed = 1;
|
|
#else
|
|
bswap_needed = 0;
|
|
#endif
|
|
kernel_base = KERNEL_LOAD_ADDR;
|
|
kernel_size = load_elf(kernel_filename, NULL,
|
|
translate_kernel_address, NULL,
|
|
NULL, &lowaddr, NULL, NULL, 1, PPC_ELF_MACHINE,
|
|
0, 0);
|
|
if (kernel_size < 0)
|
|
kernel_size = load_aout(kernel_filename, kernel_base,
|
|
ram_size - kernel_base, bswap_needed,
|
|
TARGET_PAGE_SIZE);
|
|
if (kernel_size < 0)
|
|
kernel_size = load_image_targphys(kernel_filename,
|
|
kernel_base,
|
|
ram_size - kernel_base);
|
|
if (kernel_size < 0) {
|
|
error_report("could not load kernel '%s'", kernel_filename);
|
|
exit(1);
|
|
}
|
|
/* load initrd */
|
|
if (initrd_filename) {
|
|
initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
|
|
initrd_size = load_image_targphys(initrd_filename, initrd_base,
|
|
ram_size - initrd_base);
|
|
if (initrd_size < 0) {
|
|
error_report("could not load initial ram disk '%s'",
|
|
initrd_filename);
|
|
exit(1);
|
|
}
|
|
cmdline_base = TARGET_PAGE_ALIGN(initrd_base + initrd_size);
|
|
} else {
|
|
initrd_base = 0;
|
|
initrd_size = 0;
|
|
cmdline_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP);
|
|
}
|
|
ppc_boot_device = 'm';
|
|
} else {
|
|
kernel_base = 0;
|
|
kernel_size = 0;
|
|
initrd_base = 0;
|
|
initrd_size = 0;
|
|
ppc_boot_device = '\0';
|
|
for (i = 0; boot_device[i] != '\0'; i++) {
|
|
/* TOFIX: for now, the second IDE channel is not properly
|
|
* used by OHW. The Mac floppy disk are not emulated.
|
|
* For now, OHW cannot boot from the network.
|
|
*/
|
|
#if 0
|
|
if (boot_device[i] >= 'a' && boot_device[i] <= 'f') {
|
|
ppc_boot_device = boot_device[i];
|
|
break;
|
|
}
|
|
#else
|
|
if (boot_device[i] >= 'c' && boot_device[i] <= 'd') {
|
|
ppc_boot_device = boot_device[i];
|
|
break;
|
|
}
|
|
#endif
|
|
}
|
|
if (ppc_boot_device == '\0') {
|
|
error_report("No valid boot device for G3 Beige machine");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/* XXX: we register only 1 output pin for heathrow PIC */
|
|
pic_dev = qdev_create(NULL, TYPE_HEATHROW);
|
|
qdev_init_nofail(pic_dev);
|
|
|
|
/* Connect the heathrow PIC outputs to the 6xx bus */
|
|
for (i = 0; i < smp_cpus; i++) {
|
|
switch (PPC_INPUT(env)) {
|
|
case PPC_FLAGS_INPUT_6xx:
|
|
qdev_connect_gpio_out(pic_dev, 0,
|
|
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT]);
|
|
break;
|
|
default:
|
|
error_report("Bus model not supported on OldWorld Mac machine");
|
|
exit(1);
|
|
}
|
|
}
|
|
|
|
/* Timebase Frequency */
|
|
if (kvm_enabled()) {
|
|
tbfreq = kvmppc_get_tbfreq();
|
|
} else {
|
|
tbfreq = TBFREQ;
|
|
}
|
|
|
|
/* init basic PC hardware */
|
|
if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
|
|
error_report("Only 6xx bus is supported on heathrow machine");
|
|
exit(1);
|
|
}
|
|
|
|
/* Grackle PCI host bridge */
|
|
dev = qdev_create(NULL, TYPE_GRACKLE_PCI_HOST_BRIDGE);
|
|
qdev_prop_set_uint32(dev, "ofw-addr", 0x80000000);
|
|
object_property_set_link(OBJECT(dev), OBJECT(pic_dev), "pic",
|
|
&error_abort);
|
|
qdev_init_nofail(dev);
|
|
s = SYS_BUS_DEVICE(dev);
|
|
sysbus_mmio_map(s, 0, GRACKLE_BASE);
|
|
sysbus_mmio_map(s, 1, GRACKLE_BASE + 0x200000);
|
|
/* PCI hole */
|
|
memory_region_add_subregion(get_system_memory(), 0x80000000ULL,
|
|
sysbus_mmio_get_region(s, 2));
|
|
/* Register 2 MB of ISA IO space */
|
|
memory_region_add_subregion(get_system_memory(), 0xfe000000,
|
|
sysbus_mmio_get_region(s, 3));
|
|
|
|
pci_bus = PCI_HOST_BRIDGE(dev)->bus;
|
|
|
|
pci_vga_init(pci_bus);
|
|
|
|
for (i = 0; i < nb_nics; i++) {
|
|
pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL);
|
|
}
|
|
|
|
ide_drive_get(hd, ARRAY_SIZE(hd));
|
|
|
|
/* MacIO */
|
|
macio = OLDWORLD_MACIO(pci_create(pci_bus, -1, TYPE_OLDWORLD_MACIO));
|
|
dev = DEVICE(macio);
|
|
qdev_prop_set_uint64(dev, "frequency", tbfreq);
|
|
object_property_set_link(OBJECT(macio), OBJECT(pic_dev), "pic",
|
|
&error_abort);
|
|
qdev_init_nofail(dev);
|
|
|
|
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
|
|
"ide[0]"));
|
|
macio_ide_init_drives(macio_ide, hd);
|
|
|
|
macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio),
|
|
"ide[1]"));
|
|
macio_ide_init_drives(macio_ide, &hd[MAX_IDE_DEVS]);
|
|
|
|
dev = DEVICE(object_resolve_path_component(OBJECT(macio), "cuda"));
|
|
adb_bus = qdev_get_child_bus(dev, "adb.0");
|
|
dev = qdev_create(adb_bus, TYPE_ADB_KEYBOARD);
|
|
qdev_init_nofail(dev);
|
|
dev = qdev_create(adb_bus, TYPE_ADB_MOUSE);
|
|
qdev_init_nofail(dev);
|
|
|
|
if (machine_usb(machine)) {
|
|
pci_create_simple(pci_bus, -1, "pci-ohci");
|
|
}
|
|
|
|
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
|
|
graphic_depth = 15;
|
|
|
|
/* No PCI init: the BIOS will do it */
|
|
|
|
dev = qdev_create(NULL, TYPE_FW_CFG_MEM);
|
|
fw_cfg = FW_CFG(dev);
|
|
qdev_prop_set_uint32(dev, "data_width", 1);
|
|
qdev_prop_set_bit(dev, "dma_enabled", false);
|
|
object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG,
|
|
OBJECT(fw_cfg));
|
|
qdev_init_nofail(dev);
|
|
s = SYS_BUS_DEVICE(dev);
|
|
sysbus_mmio_map(s, 0, CFG_ADDR);
|
|
sysbus_mmio_map(s, 1, CFG_ADDR + 2);
|
|
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)machine->smp.max_cpus);
|
|
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_HEATHROW);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
|
|
if (kernel_cmdline) {
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base);
|
|
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE, kernel_cmdline);
|
|
} else {
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
|
|
}
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
|
|
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
|
|
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
|
|
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
|
|
if (kvm_enabled()) {
|
|
uint8_t *hypercall;
|
|
|
|
hypercall = g_malloc(16);
|
|
kvmppc_get_hypercall(env, hypercall, 16);
|
|
fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
|
|
}
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, tbfreq);
|
|
/* Mac OS X requires a "known good" clock-frequency value; pass it one. */
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_CLOCKFREQ, CLOCKFREQ);
|
|
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_BUSFREQ, BUSFREQ);
|
|
|
|
/* MacOS NDRV VGA driver */
|
|
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, NDRV_VGA_FILENAME);
|
|
if (filename) {
|
|
gchar *ndrv_file;
|
|
gsize ndrv_size;
|
|
|
|
if (g_file_get_contents(filename, &ndrv_file, &ndrv_size, NULL)) {
|
|
fw_cfg_add_file(fw_cfg, "ndrv/qemu_vga.ndrv", ndrv_file, ndrv_size);
|
|
}
|
|
g_free(filename);
|
|
}
|
|
|
|
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
|
|
}
|
|
|
|
/*
|
|
* Implementation of an interface to adjust firmware path
|
|
* for the bootindex property handling.
|
|
*/
|
|
static char *heathrow_fw_dev_path(FWPathProvider *p, BusState *bus,
|
|
DeviceState *dev)
|
|
{
|
|
PCIDevice *pci;
|
|
IDEBus *ide_bus;
|
|
IDEState *ide_s;
|
|
MACIOIDEState *macio_ide;
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "macio-oldworld")) {
|
|
pci = PCI_DEVICE(dev);
|
|
return g_strdup_printf("mac-io@%x", PCI_SLOT(pci->devfn));
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "macio-ide")) {
|
|
macio_ide = MACIO_IDE(dev);
|
|
return g_strdup_printf("ata-3@%x", macio_ide->addr);
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-drive")) {
|
|
ide_bus = IDE_BUS(qdev_get_parent_bus(dev));
|
|
ide_s = idebus_active_if(ide_bus);
|
|
|
|
if (ide_s->drive_kind == IDE_CD) {
|
|
return g_strdup("cdrom");
|
|
}
|
|
|
|
return g_strdup("disk");
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-hd")) {
|
|
return g_strdup("disk");
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "ide-cd")) {
|
|
return g_strdup("cdrom");
|
|
}
|
|
|
|
if (!strcmp(object_get_typename(OBJECT(dev)), "virtio-blk-device")) {
|
|
return g_strdup("disk");
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int heathrow_kvm_type(MachineState *machine, const char *arg)
|
|
{
|
|
/* Always force PR KVM */
|
|
return 2;
|
|
}
|
|
|
|
static void heathrow_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
MachineClass *mc = MACHINE_CLASS(oc);
|
|
FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(oc);
|
|
|
|
mc->desc = "Heathrow based PowerMAC";
|
|
mc->init = ppc_heathrow_init;
|
|
mc->block_default_type = IF_IDE;
|
|
mc->max_cpus = MAX_CPUS;
|
|
#ifndef TARGET_PPC64
|
|
mc->is_default = true;
|
|
#endif
|
|
/* TOFIX "cad" when Mac floppy is implemented */
|
|
mc->default_boot_order = "cd";
|
|
mc->kvm_type = heathrow_kvm_type;
|
|
mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("750_v3.1");
|
|
mc->default_display = "std";
|
|
mc->ignore_boot_device_suffixes = true;
|
|
mc->default_ram_id = "ppc_heathrow.ram";
|
|
fwc->get_dev_path = heathrow_fw_dev_path;
|
|
}
|
|
|
|
static const TypeInfo ppc_heathrow_machine_info = {
|
|
.name = MACHINE_TYPE_NAME("g3beige"),
|
|
.parent = TYPE_MACHINE,
|
|
.class_init = heathrow_class_init,
|
|
.interfaces = (InterfaceInfo[]) {
|
|
{ TYPE_FW_PATH_PROVIDER },
|
|
{ }
|
|
},
|
|
};
|
|
|
|
static void ppc_heathrow_register_types(void)
|
|
{
|
|
type_register_static(&ppc_heathrow_machine_info);
|
|
}
|
|
|
|
type_init(ppc_heathrow_register_types);
|