This patch adds the barebones of the PMU logic by enabling cycle
counting. The overall logic goes as follows:
- MMCR0 reg initial value is set to 0x80000000 (MMCR0_FC set) to avoid
having to spin the PMU right at system init;
- to retrieve the events that are being profiled, pmc_get_event() will
check the current MMCR0 and MMCR1 value and return the appropriate
PMUEventType. For PMCs 1-4, event 0x2 is the implementation dependent
value of PMU_EVENT_INSTRUCTIONS and event 0x1E is the implementation
dependent value of PMU_EVENT_CYCLES. These events are supported by IBM
Power chips since Power8, at least, and the Linux Perf driver makes use
of these events until kernel v5.15. For PMC1, event 0xF0 is the
architected PowerISA event for cycles. Event 0xFE is the architected
PowerISA event for instructions;
- if the counter is frozen, either via the global MMCR0_FC bit or its
individual frozen counter bits, PMU_EVENT_INACTIVE is returned;
- pmu_update_cycles() will go through each counter and update the
values of all PMCs that are counting cycles. This function will be
called every time a MMCR0 update is done to keep counters values
up to date. Upcoming patches will use this function to allow the
counters to be properly updated during read/write of the PMCs
and MMCR1 writes.
Given that the base CPU frequency is fixed at 1Ghz for both powernv and
pseries clock, cycle calculation assumes that 1 nanosecond equals 1 CPU
cycle. Cycle value is then calculated by adding the elapsed time, in
nanoseconds, of the last cycle update done via pmu_update_cycles().
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20211201151734.654994-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
===========
QEMU README
===========
QEMU is a generic and open source machine & userspace emulator and
virtualizer.
QEMU is capable of emulating a complete machine in software without any
need for hardware virtualization support. By using dynamic translation,
it achieves very good performance. QEMU can also integrate with the Xen
and KVM hypervisors to provide emulated hardware while allowing the
hypervisor to manage the CPU. With hypervisor support, QEMU can achieve
near native performance for CPUs. When QEMU emulates CPUs directly it is
capable of running operating systems made for one machine (e.g. an ARMv7
board) on a different machine (e.g. an x86_64 PC board).
QEMU is also capable of providing userspace API virtualization for Linux
and BSD kernel interfaces. This allows binaries compiled against one
architecture ABI (e.g. the Linux PPC64 ABI) to be run on a host using a
different architecture ABI (e.g. the Linux x86_64 ABI). This does not
involve any hardware emulation, simply CPU and syscall emulation.
QEMU aims to fit into a variety of use cases. It can be invoked directly
by users wishing to have full control over its behaviour and settings.
It also aims to facilitate integration into higher level management
layers, by providing a stable command line interface and monitor API.
It is commonly invoked indirectly via the libvirt library when using
open source applications such as oVirt, OpenStack and virt-manager.
QEMU as a whole is released under the GNU General Public License,
version 2. For full licensing details, consult the LICENSE file.
Documentation
=============
Documentation can be found hosted online at
`<https://www.qemu.org/documentation/>`_. The documentation for the
current development version that is available at
`<https://www.qemu.org/docs/master/>`_ is generated from the ``docs/``
folder in the source tree, and is built by `Sphinx
<https://www.sphinx-doc.org/en/master/>_`.
Building
========
QEMU is multi-platform software intended to be buildable on all modern
Linux platforms, OS-X, Win32 (via the Mingw64 toolchain) and a variety
of other UNIX targets. The simple steps to build QEMU are:
.. code-block:: shell
mkdir build
cd build
../configure
make
Additional information can also be found online via the QEMU website:
* `<https://wiki.qemu.org/Hosts/Linux>`_
* `<https://wiki.qemu.org/Hosts/Mac>`_
* `<https://wiki.qemu.org/Hosts/W32>`_
Submitting patches
==================
The QEMU source code is maintained under the GIT version control system.
.. code-block:: shell
git clone https://gitlab.com/qemu-project/qemu.git
When submitting patches, one common approach is to use 'git
format-patch' and/or 'git send-email' to format & send the mail to the
qemu-devel@nongnu.org mailing list. All patches submitted must contain
a 'Signed-off-by' line from the author. Patches should follow the
guidelines set out in the `style section
<https://www.qemu.org/docs/master/devel/style.html>` of
the Developers Guide.
Additional information on submitting patches can be found online via
the QEMU website
* `<https://wiki.qemu.org/Contribute/SubmitAPatch>`_
* `<https://wiki.qemu.org/Contribute/TrivialPatches>`_
The QEMU website is also maintained under source control.
.. code-block:: shell
git clone https://gitlab.com/qemu-project/qemu-web.git
* `<https://www.qemu.org/2017/02/04/the-new-qemu-website-is-up/>`_
A 'git-publish' utility was created to make above process less
cumbersome, and is highly recommended for making regular contributions,
or even just for sending consecutive patch series revisions. It also
requires a working 'git send-email' setup, and by default doesn't
automate everything, so you may want to go through the above steps
manually for once.
For installation instructions, please go to
* `<https://github.com/stefanha/git-publish>`_
The workflow with 'git-publish' is:
.. code-block:: shell
$ git checkout master -b my-feature
$ # work on new commits, add your 'Signed-off-by' lines to each
$ git publish
Your patch series will be sent and tagged as my-feature-v1 if you need to refer
back to it in the future.
Sending v2:
.. code-block:: shell
$ git checkout my-feature # same topic branch
$ # making changes to the commits (using 'git rebase', for example)
$ git publish
Your patch series will be sent with 'v2' tag in the subject and the git tip
will be tagged as my-feature-v2.
Bug reporting
=============
The QEMU project uses GitLab issues to track bugs. Bugs
found when running code built from QEMU git or upstream released sources
should be reported via:
* `<https://gitlab.com/qemu-project/qemu/-/issues>`_
If using QEMU via an operating system vendor pre-built binary package, it
is preferable to report bugs to the vendor's own bug tracker first. If
the bug is also known to affect latest upstream code, it can also be
reported via GitLab.
For additional information on bug reporting consult:
* `<https://wiki.qemu.org/Contribute/ReportABug>`_
ChangeLog
=========
For version history and release notes, please visit
`<https://wiki.qemu.org/ChangeLog/>`_ or look at the git history for
more detailed information.
Contact
=======
The QEMU community can be contacted in a number of ways, with the two
main methods being email and IRC
* `<mailto:qemu-devel@nongnu.org>`_
* `<https://lists.nongnu.org/mailman/listinfo/qemu-devel>`_
* #qemu on irc.oftc.net
Information on additional methods of contacting the community can be
found online via the QEMU website:
* `<https://wiki.qemu.org/Contribute/StartHere>`_