Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20211117210702.1393570-1-sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [thuth: "what's" --> "what is" as suggested by philmd] Signed-off-by: Thomas Huth <thuth@redhat.com>
165 lines
5.4 KiB
ReStructuredText
165 lines
5.4 KiB
ReStructuredText
ppce500 generic platform (``ppce500``)
|
||
======================================
|
||
|
||
QEMU for PPC supports a special ``ppce500`` machine designed for emulation and
|
||
virtualization purposes.
|
||
|
||
Supported devices
|
||
-----------------
|
||
|
||
The ``ppce500`` machine supports the following devices:
|
||
|
||
* PowerPC e500 series core (e500v2/e500mc/e5500/e6500)
|
||
* Configuration, Control, and Status Register (CCSR)
|
||
* Multicore Programmable Interrupt Controller (MPIC) with MSI support
|
||
* 1 16550A UART device
|
||
* 1 Freescale MPC8xxx I2C controller
|
||
* 1 Pericom pt7c4338 RTC via I2C
|
||
* 1 Freescale MPC8xxx GPIO controller
|
||
* Power-off functionality via one GPIO pin
|
||
* 1 Freescale MPC8xxx PCI host controller
|
||
* VirtIO devices via PCI bus
|
||
* 1 Freescale Enhanced Triple Speed Ethernet controller (eTSEC)
|
||
|
||
Hardware configuration information
|
||
----------------------------------
|
||
|
||
The ``ppce500`` machine automatically generates a device tree blob ("dtb")
|
||
which it passes to the guest, if there is no ``-dtb`` option. This provides
|
||
information about the addresses, interrupt lines and other configuration of
|
||
the various devices in the system.
|
||
|
||
If users want to provide their own DTB, they can use the ``-dtb`` option.
|
||
These DTBs should have the following requirements:
|
||
|
||
* The number of subnodes under /cpus node should match QEMU's ``-smp`` option
|
||
* The /memory reg size should match QEMU’s selected ram_size via ``-m``
|
||
|
||
Both ``qemu-system-ppc`` and ``qemu-system-ppc64`` provide emulation for the
|
||
following 32-bit PowerPC CPUs:
|
||
|
||
* e500v2
|
||
* e500mc
|
||
|
||
Additionally ``qemu-system-ppc64`` provides support for the following 64-bit
|
||
PowerPC CPUs:
|
||
|
||
* e5500
|
||
* e6500
|
||
|
||
The CPU type can be specified via the ``-cpu`` command line. If not specified,
|
||
it creates a machine with e500v2 core. The following example shows an e6500
|
||
based machine creation:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ qemu-system-ppc64 -nographic -M ppce500 -cpu e6500
|
||
|
||
Boot options
|
||
------------
|
||
|
||
The ``ppce500`` machine can start using the standard -kernel functionality
|
||
for loading a payload like an OS kernel (e.g.: Linux), or U-Boot firmware.
|
||
|
||
When -bios is omitted, the default pc-bios/u-boot.e500 firmware image is used
|
||
as the BIOS. QEMU follows below truth table to select which payload to execute:
|
||
|
||
===== ========== =======
|
||
-bios -kernel payload
|
||
===== ========== =======
|
||
N N u-boot
|
||
N Y kernel
|
||
Y don't care u-boot
|
||
===== ========== =======
|
||
|
||
When both -bios and -kernel are present, QEMU loads U-Boot and U-Boot in turns
|
||
automatically loads the kernel image specified by the -kernel parameter via
|
||
U-Boot's built-in "bootm" command, hence a legacy uImage format is required in
|
||
such scenario.
|
||
|
||
Running Linux kernel
|
||
--------------------
|
||
|
||
Linux mainline v5.11 release is tested at the time of writing. To build a
|
||
Linux mainline kernel that can be booted by the ``ppce500`` machine in
|
||
64-bit mode, simply configure the kernel using the defconfig configuration:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ export ARCH=powerpc
|
||
$ export CROSS_COMPILE=powerpc-linux-
|
||
$ make corenet64_smp_defconfig
|
||
$ make menuconfig
|
||
|
||
then manually select the following configuration:
|
||
|
||
Platform support > Freescale Book-E Machine Type > QEMU generic e500 platform
|
||
|
||
To boot the newly built Linux kernel in QEMU with the ``ppce500`` machine:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ qemu-system-ppc64 -M ppce500 -cpu e5500 -smp 4 -m 2G \
|
||
-display none -serial stdio \
|
||
-kernel vmlinux \
|
||
-initrd /path/to/rootfs.cpio \
|
||
-append "root=/dev/ram"
|
||
|
||
To build a Linux mainline kernel that can be booted by the ``ppce500`` machine
|
||
in 32-bit mode, use the same 64-bit configuration steps except the defconfig
|
||
file should use corenet32_smp_defconfig.
|
||
|
||
To boot the 32-bit Linux kernel:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ qemu-system-ppc{64|32} -M ppce500 -cpu e500mc -smp 4 -m 2G \
|
||
-display none -serial stdio \
|
||
-kernel vmlinux \
|
||
-initrd /path/to/rootfs.cpio \
|
||
-append "root=/dev/ram"
|
||
|
||
Running U-Boot
|
||
--------------
|
||
|
||
U-Boot mainline v2021.07 release is tested at the time of writing. To build a
|
||
U-Boot mainline bootloader that can be booted by the ``ppce500`` machine, use
|
||
the qemu-ppce500_defconfig with similar commands as described above for Linux:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ export CROSS_COMPILE=powerpc-linux-
|
||
$ make qemu-ppce500_defconfig
|
||
|
||
You will get u-boot file in the build tree.
|
||
|
||
When U-Boot boots, you will notice the following if using with ``-cpu e6500``:
|
||
|
||
.. code-block:: none
|
||
|
||
CPU: Unknown, Version: 0.0, (0x00000000)
|
||
Core: e6500, Version: 2.0, (0x80400020)
|
||
|
||
This is because we only specified a core name to QEMU and it does not have a
|
||
meaningful SVR value which represents an actual SoC that integrates such core.
|
||
You can specify a real world SoC device that QEMU has built-in support but all
|
||
these SoCs are e500v2 based MPC85xx series, hence you cannot test anything
|
||
built for P4080 (e500mc), P5020 (e5500) and T2080 (e6500).
|
||
|
||
By default a VirtIO standard PCI networking device is connected as an ethernet
|
||
interface at PCI address 0.1.0, but we can switch that to an e1000 NIC by:
|
||
|
||
.. code-block:: bash
|
||
|
||
$ qemu-system-ppc -M ppce500 -smp 4 -m 2G \
|
||
-display none -serial stdio \
|
||
-bios u-boot \
|
||
-nic tap,ifname=tap0,script=no,downscript=no,model=e1000
|
||
|
||
The QEMU ``ppce500`` machine can also dynamically instantiate an eTSEC device
|
||
if “-device eTSEC” is given to QEMU:
|
||
|
||
.. code-block:: bash
|
||
|
||
-netdev tap,ifname=tap0,script=no,downscript=no,id=net0 -device eTSEC,netdev=net0
|