Handle this at the ADB bus level so that individual implementations do not need to handle this themselves. Finally add an assert() into adb_request() to prevent developers from accidentally making an explicit ADB request without blocking autopoll. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Tested-by: Finn Thain <fthain@telegraphics.com.au> Acked-by: Laurent Vivier <laurent@vivier.eu> Message-Id: <20200623204936.24064-21-mark.cave-ayland@ilande.co.uk>
1271 lines
42 KiB
C
1271 lines
42 KiB
C
/*
|
|
* QEMU m68k Macintosh VIA device support
|
|
*
|
|
* Copyright (c) 2011-2018 Laurent Vivier
|
|
* Copyright (c) 2018 Mark Cave-Ayland
|
|
*
|
|
* Some parts from hw/misc/macio/cuda.c
|
|
*
|
|
* Copyright (c) 2004-2007 Fabrice Bellard
|
|
* Copyright (c) 2007 Jocelyn Mayer
|
|
*
|
|
* some parts from linux-2.6.29, arch/m68k/include/asm/mac_via.h
|
|
*
|
|
* This work is licensed under the terms of the GNU GPL, version 2 or later.
|
|
* See the COPYING file in the top-level directory.
|
|
*/
|
|
|
|
#include "qemu/osdep.h"
|
|
#include "qemu-common.h"
|
|
#include "migration/vmstate.h"
|
|
#include "hw/sysbus.h"
|
|
#include "hw/irq.h"
|
|
#include "qemu/timer.h"
|
|
#include "hw/misc/mac_via.h"
|
|
#include "hw/misc/mos6522.h"
|
|
#include "hw/input/adb.h"
|
|
#include "sysemu/runstate.h"
|
|
#include "qapi/error.h"
|
|
#include "qemu/cutils.h"
|
|
#include "hw/qdev-properties.h"
|
|
#include "sysemu/block-backend.h"
|
|
#include "trace.h"
|
|
#include "qemu/log.h"
|
|
|
|
/*
|
|
* VIAs: There are two in every machine,
|
|
*/
|
|
|
|
#define VIA_SIZE (0x2000)
|
|
|
|
/*
|
|
* Not all of these are true post MacII I think.
|
|
* CSA: probably the ones CHRP marks as 'unused' change purposes
|
|
* when the IWM becomes the SWIM.
|
|
* http://www.rs6000.ibm.com/resource/technology/chrpio/via5.mak.html
|
|
* ftp://ftp.austin.ibm.com/pub/technology/spec/chrp/inwork/CHRP_IORef_1.0.pdf
|
|
*
|
|
* also, http://developer.apple.com/technotes/hw/hw_09.html claims the
|
|
* following changes for IIfx:
|
|
* VIA1A_vSccWrReq not available and that VIA1A_vSync has moved to an IOP.
|
|
* Also, "All of the functionality of VIA2 has been moved to other chips".
|
|
*/
|
|
|
|
#define VIA1A_vSccWrReq 0x80 /*
|
|
* SCC write. (input)
|
|
* [CHRP] SCC WREQ: Reflects the state of the
|
|
* Wait/Request pins from the SCC.
|
|
* [Macintosh Family Hardware]
|
|
* as CHRP on SE/30,II,IIx,IIcx,IIci.
|
|
* on IIfx, "0 means an active request"
|
|
*/
|
|
#define VIA1A_vRev8 0x40 /*
|
|
* Revision 8 board ???
|
|
* [CHRP] En WaitReqB: Lets the WaitReq_L
|
|
* signal from port B of the SCC appear on
|
|
* the PA7 input pin. Output.
|
|
* [Macintosh Family] On the SE/30, this
|
|
* is the bit to flip screen buffers.
|
|
* 0=alternate, 1=main.
|
|
* on II,IIx,IIcx,IIci,IIfx this is a bit
|
|
* for Rev ID. 0=II,IIx, 1=IIcx,IIci,IIfx
|
|
*/
|
|
#define VIA1A_vHeadSel 0x20 /*
|
|
* Head select for IWM.
|
|
* [CHRP] unused.
|
|
* [Macintosh Family] "Floppy disk
|
|
* state-control line SEL" on all but IIfx
|
|
*/
|
|
#define VIA1A_vOverlay 0x10 /*
|
|
* [Macintosh Family] On SE/30,II,IIx,IIcx
|
|
* this bit enables the "Overlay" address
|
|
* map in the address decoders as it is on
|
|
* reset for mapping the ROM over the reset
|
|
* vector. 1=use overlay map.
|
|
* On the IIci,IIfx it is another bit of the
|
|
* CPU ID: 0=normal IIci, 1=IIci with parity
|
|
* feature or IIfx.
|
|
* [CHRP] En WaitReqA: Lets the WaitReq_L
|
|
* signal from port A of the SCC appear
|
|
* on the PA7 input pin (CHRP). Output.
|
|
* [MkLinux] "Drive Select"
|
|
* (with 0x20 being 'disk head select')
|
|
*/
|
|
#define VIA1A_vSync 0x08 /*
|
|
* [CHRP] Sync Modem: modem clock select:
|
|
* 1: select the external serial clock to
|
|
* drive the SCC's /RTxCA pin.
|
|
* 0: Select the 3.6864MHz clock to drive
|
|
* the SCC cell.
|
|
* [Macintosh Family] Correct on all but IIfx
|
|
*/
|
|
|
|
/*
|
|
* Macintosh Family Hardware sez: bits 0-2 of VIA1A are volume control
|
|
* on Macs which had the PWM sound hardware. Reserved on newer models.
|
|
* On IIci,IIfx, bits 1-2 are the rest of the CPU ID:
|
|
* bit 2: 1=IIci, 0=IIfx
|
|
* bit 1: 1 on both IIci and IIfx.
|
|
* MkLinux sez bit 0 is 'burnin flag' in this case.
|
|
* CHRP sez: VIA1A bits 0-2 and 5 are 'unused': if programmed as
|
|
* inputs, these bits will read 0.
|
|
*/
|
|
#define VIA1A_vVolume 0x07 /* Audio volume mask for PWM */
|
|
#define VIA1A_CPUID0 0x02 /* CPU id bit 0 on RBV, others */
|
|
#define VIA1A_CPUID1 0x04 /* CPU id bit 0 on RBV, others */
|
|
#define VIA1A_CPUID2 0x10 /* CPU id bit 0 on RBV, others */
|
|
#define VIA1A_CPUID3 0x40 /* CPU id bit 0 on RBV, others */
|
|
|
|
/*
|
|
* Info on VIA1B is from Macintosh Family Hardware & MkLinux.
|
|
* CHRP offers no info.
|
|
*/
|
|
#define VIA1B_vSound 0x80 /*
|
|
* Sound enable (for compatibility with
|
|
* PWM hardware) 0=enabled.
|
|
* Also, on IIci w/parity, shows parity error
|
|
* 0=error, 1=OK.
|
|
*/
|
|
#define VIA1B_vMystery 0x40 /*
|
|
* On IIci, parity enable. 0=enabled,1=disabled
|
|
* On SE/30, vertical sync interrupt enable.
|
|
* 0=enabled. This vSync interrupt shows up
|
|
* as a slot $E interrupt.
|
|
*/
|
|
#define VIA1B_vADBS2 0x20 /* ADB state input bit 1 (unused on IIfx) */
|
|
#define VIA1B_vADBS1 0x10 /* ADB state input bit 0 (unused on IIfx) */
|
|
#define VIA1B_vADBInt 0x08 /* ADB interrupt 0=interrupt (unused on IIfx)*/
|
|
#define VIA1B_vRTCEnb 0x04 /* Enable Real time clock. 0=enabled. */
|
|
#define VIA1B_vRTCClk 0x02 /* Real time clock serial-clock line. */
|
|
#define VIA1B_vRTCData 0x01 /* Real time clock serial-data line. */
|
|
|
|
/*
|
|
* VIA2 A register is the interrupt lines raised off the nubus
|
|
* slots.
|
|
* The below info is from 'Macintosh Family Hardware.'
|
|
* MkLinux calls the 'IIci internal video IRQ' below the 'RBV slot 0 irq.'
|
|
* It also notes that the slot $9 IRQ is the 'Ethernet IRQ' and
|
|
* defines the 'Video IRQ' as 0x40 for the 'EVR' VIA work-alike.
|
|
* Perhaps OSS uses vRAM1 and vRAM2 for ADB.
|
|
*/
|
|
|
|
#define VIA2A_vRAM1 0x80 /* RAM size bit 1 (IIci: reserved) */
|
|
#define VIA2A_vRAM0 0x40 /* RAM size bit 0 (IIci: internal video IRQ) */
|
|
#define VIA2A_vIRQE 0x20 /* IRQ from slot $E */
|
|
#define VIA2A_vIRQD 0x10 /* IRQ from slot $D */
|
|
#define VIA2A_vIRQC 0x08 /* IRQ from slot $C */
|
|
#define VIA2A_vIRQB 0x04 /* IRQ from slot $B */
|
|
#define VIA2A_vIRQA 0x02 /* IRQ from slot $A */
|
|
#define VIA2A_vIRQ9 0x01 /* IRQ from slot $9 */
|
|
|
|
/*
|
|
* RAM size bits decoded as follows:
|
|
* bit1 bit0 size of ICs in bank A
|
|
* 0 0 256 kbit
|
|
* 0 1 1 Mbit
|
|
* 1 0 4 Mbit
|
|
* 1 1 16 Mbit
|
|
*/
|
|
|
|
/*
|
|
* Register B has the fun stuff in it
|
|
*/
|
|
|
|
#define VIA2B_vVBL 0x80 /*
|
|
* VBL output to VIA1 (60.15Hz) driven by
|
|
* timer T1.
|
|
* on IIci, parity test: 0=test mode.
|
|
* [MkLinux] RBV_PARODD: 1=odd,0=even.
|
|
*/
|
|
#define VIA2B_vSndJck 0x40 /*
|
|
* External sound jack status.
|
|
* 0=plug is inserted. On SE/30, always 0
|
|
*/
|
|
#define VIA2B_vTfr0 0x20 /* Transfer mode bit 0 ack from NuBus */
|
|
#define VIA2B_vTfr1 0x10 /* Transfer mode bit 1 ack from NuBus */
|
|
#define VIA2B_vMode32 0x08 /*
|
|
* 24/32bit switch - doubles as cache flush
|
|
* on II, AMU/PMMU control.
|
|
* if AMU, 0=24bit to 32bit translation
|
|
* if PMMU, 1=PMMU is accessing page table.
|
|
* on SE/30 tied low.
|
|
* on IIx,IIcx,IIfx, unused.
|
|
* on IIci/RBV, cache control. 0=flush cache.
|
|
*/
|
|
#define VIA2B_vPower 0x04 /*
|
|
* Power off, 0=shut off power.
|
|
* on SE/30 this signal sent to PDS card.
|
|
*/
|
|
#define VIA2B_vBusLk 0x02 /*
|
|
* Lock NuBus transactions, 0=locked.
|
|
* on SE/30 sent to PDS card.
|
|
*/
|
|
#define VIA2B_vCDis 0x01 /*
|
|
* Cache control. On IIci, 1=disable cache card
|
|
* on others, 0=disable processor's instruction
|
|
* and data caches.
|
|
*/
|
|
|
|
/* interrupt flags */
|
|
|
|
#define IRQ_SET 0x80
|
|
|
|
/* common */
|
|
|
|
#define VIA_IRQ_TIMER1 0x40
|
|
#define VIA_IRQ_TIMER2 0x20
|
|
|
|
/*
|
|
* Apple sez: http://developer.apple.com/technotes/ov/ov_04.html
|
|
* Another example of a valid function that has no ROM support is the use
|
|
* of the alternate video page for page-flipping animation. Since there
|
|
* is no ROM call to flip pages, it is necessary to go play with the
|
|
* right bit in the VIA chip (6522 Versatile Interface Adapter).
|
|
* [CSA: don't know which one this is, but it's one of 'em!]
|
|
*/
|
|
|
|
/*
|
|
* 6522 registers - see databook.
|
|
* CSA: Assignments for VIA1 confirmed from CHRP spec.
|
|
*/
|
|
|
|
/* partial address decode. 0xYYXX : XX part for RBV, YY part for VIA */
|
|
/* Note: 15 VIA regs, 8 RBV regs */
|
|
|
|
#define vBufB 0x0000 /* [VIA/RBV] Register B */
|
|
#define vBufAH 0x0200 /* [VIA only] Buffer A, with handshake. DON'T USE! */
|
|
#define vDirB 0x0400 /* [VIA only] Data Direction Register B. */
|
|
#define vDirA 0x0600 /* [VIA only] Data Direction Register A. */
|
|
#define vT1CL 0x0800 /* [VIA only] Timer one counter low. */
|
|
#define vT1CH 0x0a00 /* [VIA only] Timer one counter high. */
|
|
#define vT1LL 0x0c00 /* [VIA only] Timer one latches low. */
|
|
#define vT1LH 0x0e00 /* [VIA only] Timer one latches high. */
|
|
#define vT2CL 0x1000 /* [VIA only] Timer two counter low. */
|
|
#define vT2CH 0x1200 /* [VIA only] Timer two counter high. */
|
|
#define vSR 0x1400 /* [VIA only] Shift register. */
|
|
#define vACR 0x1600 /* [VIA only] Auxilary control register. */
|
|
#define vPCR 0x1800 /* [VIA only] Peripheral control register. */
|
|
/*
|
|
* CHRP sez never ever to *write* this.
|
|
* Mac family says never to *change* this.
|
|
* In fact we need to initialize it once at start.
|
|
*/
|
|
#define vIFR 0x1a00 /* [VIA/RBV] Interrupt flag register. */
|
|
#define vIER 0x1c00 /* [VIA/RBV] Interrupt enable register. */
|
|
#define vBufA 0x1e00 /* [VIA/RBV] register A (no handshake) */
|
|
|
|
/* from linux 2.6 drivers/macintosh/via-macii.c */
|
|
|
|
/* Bits in ACR */
|
|
|
|
#define VIA1ACR_vShiftCtrl 0x1c /* Shift register control bits */
|
|
#define VIA1ACR_vShiftExtClk 0x0c /* Shift on external clock */
|
|
#define VIA1ACR_vShiftOut 0x10 /* Shift out if 1 */
|
|
|
|
/*
|
|
* Apple Macintosh Family Hardware Refenece
|
|
* Table 19-10 ADB transaction states
|
|
*/
|
|
|
|
#define ADB_STATE_NEW 0
|
|
#define ADB_STATE_EVEN 1
|
|
#define ADB_STATE_ODD 2
|
|
#define ADB_STATE_IDLE 3
|
|
|
|
#define VIA1B_vADB_StateMask (VIA1B_vADBS1 | VIA1B_vADBS2)
|
|
#define VIA1B_vADB_StateShift 4
|
|
|
|
#define VIA_TIMER_FREQ (783360)
|
|
#define VIA_ADB_POLL_FREQ 50 /* XXX: not real */
|
|
|
|
/* VIA returns time offset from Jan 1, 1904, not 1970 */
|
|
#define RTC_OFFSET 2082844800
|
|
|
|
enum {
|
|
REG_0,
|
|
REG_1,
|
|
REG_2,
|
|
REG_3,
|
|
REG_TEST,
|
|
REG_WPROTECT,
|
|
REG_PRAM_ADDR,
|
|
REG_PRAM_ADDR_LAST = REG_PRAM_ADDR + 19,
|
|
REG_PRAM_SECT,
|
|
REG_PRAM_SECT_LAST = REG_PRAM_SECT + 7,
|
|
REG_INVALID,
|
|
REG_EMPTY = 0xff,
|
|
};
|
|
|
|
static void via1_VBL_update(MOS6522Q800VIA1State *v1s)
|
|
{
|
|
MOS6522State *s = MOS6522(v1s);
|
|
|
|
/* 60 Hz irq */
|
|
v1s->next_VBL = (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + 16630) /
|
|
16630 * 16630;
|
|
|
|
if (s->ier & VIA1_IRQ_VBLANK) {
|
|
timer_mod(v1s->VBL_timer, v1s->next_VBL);
|
|
} else {
|
|
timer_del(v1s->VBL_timer);
|
|
}
|
|
}
|
|
|
|
static void via1_one_second_update(MOS6522Q800VIA1State *v1s)
|
|
{
|
|
MOS6522State *s = MOS6522(v1s);
|
|
|
|
v1s->next_second = (qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 1000) /
|
|
1000 * 1000;
|
|
if (s->ier & VIA1_IRQ_ONE_SECOND) {
|
|
timer_mod(v1s->one_second_timer, v1s->next_second);
|
|
} else {
|
|
timer_del(v1s->one_second_timer);
|
|
}
|
|
}
|
|
|
|
static void via1_VBL(void *opaque)
|
|
{
|
|
MOS6522Q800VIA1State *v1s = opaque;
|
|
MOS6522State *s = MOS6522(v1s);
|
|
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
|
|
|
|
s->ifr |= VIA1_IRQ_VBLANK;
|
|
mdc->update_irq(s);
|
|
|
|
via1_VBL_update(v1s);
|
|
}
|
|
|
|
static void via1_one_second(void *opaque)
|
|
{
|
|
MOS6522Q800VIA1State *v1s = opaque;
|
|
MOS6522State *s = MOS6522(v1s);
|
|
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
|
|
|
|
s->ifr |= VIA1_IRQ_ONE_SECOND;
|
|
mdc->update_irq(s);
|
|
|
|
via1_one_second_update(v1s);
|
|
}
|
|
|
|
static void via1_irq_request(void *opaque, int irq, int level)
|
|
{
|
|
MOS6522Q800VIA1State *v1s = opaque;
|
|
MOS6522State *s = MOS6522(v1s);
|
|
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
|
|
|
|
if (level) {
|
|
s->ifr |= 1 << irq;
|
|
} else {
|
|
s->ifr &= ~(1 << irq);
|
|
}
|
|
|
|
mdc->update_irq(s);
|
|
}
|
|
|
|
static void via2_irq_request(void *opaque, int irq, int level)
|
|
{
|
|
MOS6522Q800VIA2State *v2s = opaque;
|
|
MOS6522State *s = MOS6522(v2s);
|
|
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(s);
|
|
|
|
if (level) {
|
|
s->ifr |= 1 << irq;
|
|
} else {
|
|
s->ifr &= ~(1 << irq);
|
|
}
|
|
|
|
mdc->update_irq(s);
|
|
}
|
|
|
|
|
|
static void pram_update(MacVIAState *m)
|
|
{
|
|
if (m->blk) {
|
|
if (blk_pwrite(m->blk, 0, m->mos6522_via1.PRAM,
|
|
sizeof(m->mos6522_via1.PRAM), 0) < 0) {
|
|
qemu_log("pram_update: cannot write to file\n");
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* RTC Commands
|
|
*
|
|
* Command byte Register addressed by the command
|
|
*
|
|
* z0000001 Seconds register 0 (lowest-order byte)
|
|
* z0000101 Seconds register 1
|
|
* z0001001 Seconds register 2
|
|
* z0001101 Seconds register 3 (highest-order byte)
|
|
* 00110001 Test register (write-only)
|
|
* 00110101 Write-Protect Register (write-only)
|
|
* z010aa01 RAM address 100aa ($10-$13) (first 20 bytes only)
|
|
* z1aaaa01 RAM address 0aaaa ($00-$0F) (first 20 bytes only)
|
|
* z0111aaa Extended memory designator and sector number
|
|
*
|
|
* For a read request, z=1, for a write z=0
|
|
* The letter a indicates bits whose value depend on what parameter
|
|
* RAM byte you want to address
|
|
*/
|
|
static int via1_rtc_compact_cmd(uint8_t value)
|
|
{
|
|
uint8_t read = value & 0x80;
|
|
|
|
value &= 0x7f;
|
|
|
|
/* the last 2 bits of a command byte must always be 0b01 ... */
|
|
if ((value & 0x78) == 0x38) {
|
|
/* except for the extended memory designator */
|
|
return read | (REG_PRAM_SECT + (value & 0x07));
|
|
}
|
|
if ((value & 0x03) == 0x01) {
|
|
value >>= 2;
|
|
if ((value & 0x1c) == 0) {
|
|
/* seconds registers */
|
|
return read | (REG_0 + (value & 0x03));
|
|
} else if ((value == 0x0c) && !read) {
|
|
return REG_TEST;
|
|
} else if ((value == 0x0d) && !read) {
|
|
return REG_WPROTECT;
|
|
} else if ((value & 0x1c) == 0x08) {
|
|
/* RAM address 0x10 to 0x13 */
|
|
return read | (REG_PRAM_ADDR + 0x10 + (value & 0x03));
|
|
} else if ((value & 0x43) == 0x41) {
|
|
/* RAM address 0x00 to 0x0f */
|
|
return read | (REG_PRAM_ADDR + (value & 0x0f));
|
|
}
|
|
}
|
|
return REG_INVALID;
|
|
}
|
|
|
|
static void via1_rtc_update(MacVIAState *m)
|
|
{
|
|
MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
|
|
MOS6522State *s = MOS6522(v1s);
|
|
int cmd, sector, addr;
|
|
uint32_t time;
|
|
|
|
if (s->b & VIA1B_vRTCEnb) {
|
|
return;
|
|
}
|
|
|
|
if (s->dirb & VIA1B_vRTCData) {
|
|
/* send bits to the RTC */
|
|
if (!(v1s->last_b & VIA1B_vRTCClk) && (s->b & VIA1B_vRTCClk)) {
|
|
m->data_out <<= 1;
|
|
m->data_out |= s->b & VIA1B_vRTCData;
|
|
m->data_out_cnt++;
|
|
}
|
|
trace_via1_rtc_update_data_out(m->data_out_cnt, m->data_out);
|
|
} else {
|
|
trace_via1_rtc_update_data_in(m->data_in_cnt, m->data_in);
|
|
/* receive bits from the RTC */
|
|
if ((v1s->last_b & VIA1B_vRTCClk) &&
|
|
!(s->b & VIA1B_vRTCClk) &&
|
|
m->data_in_cnt) {
|
|
s->b = (s->b & ~VIA1B_vRTCData) |
|
|
((m->data_in >> 7) & VIA1B_vRTCData);
|
|
m->data_in <<= 1;
|
|
m->data_in_cnt--;
|
|
}
|
|
return;
|
|
}
|
|
|
|
if (m->data_out_cnt != 8) {
|
|
return;
|
|
}
|
|
|
|
m->data_out_cnt = 0;
|
|
|
|
trace_via1_rtc_internal_status(m->cmd, m->alt, m->data_out);
|
|
/* first byte: it's a command */
|
|
if (m->cmd == REG_EMPTY) {
|
|
|
|
cmd = via1_rtc_compact_cmd(m->data_out);
|
|
trace_via1_rtc_internal_cmd(cmd);
|
|
|
|
if (cmd == REG_INVALID) {
|
|
trace_via1_rtc_cmd_invalid(m->data_out);
|
|
return;
|
|
}
|
|
|
|
if (cmd & 0x80) { /* this is a read command */
|
|
switch (cmd & 0x7f) {
|
|
case REG_0...REG_3: /* seconds registers */
|
|
/*
|
|
* register 0 is lowest-order byte
|
|
* register 3 is highest-order byte
|
|
*/
|
|
|
|
time = m->tick_offset + (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)
|
|
/ NANOSECONDS_PER_SECOND);
|
|
trace_via1_rtc_internal_time(time);
|
|
m->data_in = (time >> ((cmd & 0x03) << 3)) & 0xff;
|
|
m->data_in_cnt = 8;
|
|
trace_via1_rtc_cmd_seconds_read((cmd & 0x7f) - REG_0,
|
|
m->data_in);
|
|
break;
|
|
case REG_PRAM_ADDR...REG_PRAM_ADDR_LAST:
|
|
/* PRAM address 0x00 -> 0x13 */
|
|
m->data_in = v1s->PRAM[(cmd & 0x7f) - REG_PRAM_ADDR];
|
|
m->data_in_cnt = 8;
|
|
trace_via1_rtc_cmd_pram_read((cmd & 0x7f) - REG_PRAM_ADDR,
|
|
m->data_in);
|
|
break;
|
|
case REG_PRAM_SECT...REG_PRAM_SECT_LAST:
|
|
/*
|
|
* extended memory designator and sector number
|
|
* the only two-byte read command
|
|
*/
|
|
trace_via1_rtc_internal_set_cmd(cmd);
|
|
m->cmd = cmd;
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* this is a write command, needs a parameter */
|
|
if (cmd == REG_WPROTECT || !m->wprotect) {
|
|
trace_via1_rtc_internal_set_cmd(cmd);
|
|
m->cmd = cmd;
|
|
} else {
|
|
trace_via1_rtc_internal_ignore_cmd(cmd);
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* second byte: it's a parameter */
|
|
if (m->alt == REG_EMPTY) {
|
|
switch (m->cmd & 0x7f) {
|
|
case REG_0...REG_3: /* seconds register */
|
|
/* FIXME */
|
|
trace_via1_rtc_cmd_seconds_write(m->cmd - REG_0, m->data_out);
|
|
m->cmd = REG_EMPTY;
|
|
break;
|
|
case REG_TEST:
|
|
/* device control: nothing to do */
|
|
trace_via1_rtc_cmd_test_write(m->data_out);
|
|
m->cmd = REG_EMPTY;
|
|
break;
|
|
case REG_WPROTECT:
|
|
/* Write Protect register */
|
|
trace_via1_rtc_cmd_wprotect_write(m->data_out);
|
|
m->wprotect = !!(m->data_out & 0x80);
|
|
m->cmd = REG_EMPTY;
|
|
break;
|
|
case REG_PRAM_ADDR...REG_PRAM_ADDR_LAST:
|
|
/* PRAM address 0x00 -> 0x13 */
|
|
trace_via1_rtc_cmd_pram_write(m->cmd - REG_PRAM_ADDR, m->data_out);
|
|
v1s->PRAM[m->cmd - REG_PRAM_ADDR] = m->data_out;
|
|
pram_update(m);
|
|
m->cmd = REG_EMPTY;
|
|
break;
|
|
case REG_PRAM_SECT...REG_PRAM_SECT_LAST:
|
|
addr = (m->data_out >> 2) & 0x1f;
|
|
sector = (m->cmd & 0x7f) - REG_PRAM_SECT;
|
|
if (m->cmd & 0x80) {
|
|
/* it's a read */
|
|
m->data_in = v1s->PRAM[sector * 32 + addr];
|
|
m->data_in_cnt = 8;
|
|
trace_via1_rtc_cmd_pram_sect_read(sector, addr,
|
|
sector * 32 + addr,
|
|
m->data_in);
|
|
m->cmd = REG_EMPTY;
|
|
} else {
|
|
/* it's a write, we need one more parameter */
|
|
trace_via1_rtc_internal_set_alt(addr, sector, addr);
|
|
m->alt = addr;
|
|
}
|
|
break;
|
|
default:
|
|
g_assert_not_reached();
|
|
break;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/* third byte: it's the data of a REG_PRAM_SECT write */
|
|
g_assert(REG_PRAM_SECT <= m->cmd && m->cmd <= REG_PRAM_SECT_LAST);
|
|
sector = m->cmd - REG_PRAM_SECT;
|
|
v1s->PRAM[sector * 32 + m->alt] = m->data_out;
|
|
pram_update(m);
|
|
trace_via1_rtc_cmd_pram_sect_write(sector, m->alt, sector * 32 + m->alt,
|
|
m->data_out);
|
|
m->alt = REG_EMPTY;
|
|
m->cmd = REG_EMPTY;
|
|
}
|
|
|
|
static void adb_via_poll(void *opaque)
|
|
{
|
|
MacVIAState *m = opaque;
|
|
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
|
|
MOS6522State *s = MOS6522(v1s);
|
|
ADBBusState *adb_bus = &m->adb_bus;
|
|
uint8_t obuf[9];
|
|
uint8_t *data = &s->sr;
|
|
int olen;
|
|
uint16_t pending;
|
|
|
|
/*
|
|
* Setting vADBInt below indicates that an autopoll reply has been
|
|
* received, however we must block autopoll until the point where
|
|
* the entire reply has been read back to the host
|
|
*/
|
|
adb_autopoll_block(adb_bus);
|
|
|
|
m->adb_data_in_index = 0;
|
|
m->adb_data_out_index = 0;
|
|
olen = adb_poll(adb_bus, obuf, adb_bus->autopoll_mask);
|
|
|
|
if (olen > 0) {
|
|
/* Autopoll response */
|
|
*data = obuf[0];
|
|
olen--;
|
|
memcpy(m->adb_data_in, &obuf[1], olen);
|
|
m->adb_data_in_size = olen;
|
|
|
|
s->b &= ~VIA1B_vADBInt;
|
|
qemu_irq_raise(m->adb_data_ready);
|
|
} else if (olen < 0) {
|
|
/* Bus timeout (device does not exist) */
|
|
*data = 0xff;
|
|
s->b |= VIA1B_vADBInt;
|
|
adb_autopoll_unblock(adb_bus);
|
|
} else {
|
|
pending = adb_bus->pending & ~(1 << (m->adb_autopoll_cmd >> 4));
|
|
|
|
if (pending) {
|
|
/*
|
|
* Bus timeout (device exists but another device has data). Block
|
|
* autopoll so the OS can read out the first EVEN and first ODD
|
|
* byte to determine bus timeout and SRQ status
|
|
*/
|
|
*data = m->adb_autopoll_cmd;
|
|
s->b &= ~VIA1B_vADBInt;
|
|
|
|
obuf[0] = 0xff;
|
|
obuf[1] = 0xff;
|
|
olen = 2;
|
|
|
|
memcpy(m->adb_data_in, obuf, olen);
|
|
m->adb_data_in_size = olen;
|
|
|
|
qemu_irq_raise(m->adb_data_ready);
|
|
} else {
|
|
/* Bus timeout (device exists but no other device has data) */
|
|
*data = 0;
|
|
s->b |= VIA1B_vADBInt;
|
|
adb_autopoll_unblock(adb_bus);
|
|
}
|
|
}
|
|
|
|
trace_via1_adb_poll(*data, (s->b & VIA1B_vADBInt) ? "+" : "-",
|
|
adb_bus->status, m->adb_data_in_index, olen);
|
|
}
|
|
|
|
static int adb_via_send_len(uint8_t data)
|
|
{
|
|
/* Determine the send length from the given ADB command */
|
|
uint8_t cmd = data & 0xc;
|
|
uint8_t reg = data & 0x3;
|
|
|
|
switch (cmd) {
|
|
case 0x8:
|
|
/* Listen command */
|
|
switch (reg) {
|
|
case 2:
|
|
/* Register 2 is only used for the keyboard */
|
|
return 3;
|
|
case 3:
|
|
/*
|
|
* Fortunately our devices only implement writes
|
|
* to register 3 which is fixed at 2 bytes
|
|
*/
|
|
return 3;
|
|
default:
|
|
qemu_log_mask(LOG_UNIMP, "ADB unknown length for register %d\n",
|
|
reg);
|
|
return 1;
|
|
}
|
|
default:
|
|
/* Talk, BusReset */
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
static void adb_via_send(MacVIAState *s, int state, uint8_t data)
|
|
{
|
|
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&s->mos6522_via1);
|
|
MOS6522State *ms = MOS6522(v1s);
|
|
ADBBusState *adb_bus = &s->adb_bus;
|
|
uint16_t autopoll_mask;
|
|
|
|
switch (state) {
|
|
case ADB_STATE_NEW:
|
|
/*
|
|
* Command byte: vADBInt tells host autopoll data already present
|
|
* in VIA shift register and ADB transceiver
|
|
*/
|
|
adb_autopoll_block(adb_bus);
|
|
|
|
if (adb_bus->status & ADB_STATUS_POLLREPLY) {
|
|
/* Tell the host the existing data is from autopoll */
|
|
ms->b &= ~VIA1B_vADBInt;
|
|
} else {
|
|
ms->b |= VIA1B_vADBInt;
|
|
s->adb_data_out_index = 0;
|
|
s->adb_data_out[s->adb_data_out_index++] = data;
|
|
}
|
|
|
|
trace_via1_adb_send(" NEW", data, (ms->b & VIA1B_vADBInt) ? "+" : "-");
|
|
qemu_irq_raise(s->adb_data_ready);
|
|
break;
|
|
|
|
case ADB_STATE_EVEN:
|
|
case ADB_STATE_ODD:
|
|
ms->b |= VIA1B_vADBInt;
|
|
s->adb_data_out[s->adb_data_out_index++] = data;
|
|
|
|
trace_via1_adb_send(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
|
|
data, (ms->b & VIA1B_vADBInt) ? "+" : "-");
|
|
qemu_irq_raise(s->adb_data_ready);
|
|
break;
|
|
|
|
case ADB_STATE_IDLE:
|
|
return;
|
|
}
|
|
|
|
/* If the command is complete, execute it */
|
|
if (s->adb_data_out_index == adb_via_send_len(s->adb_data_out[0])) {
|
|
s->adb_data_in_size = adb_request(adb_bus, s->adb_data_in,
|
|
s->adb_data_out,
|
|
s->adb_data_out_index);
|
|
s->adb_data_in_index = 0;
|
|
|
|
if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
|
|
/*
|
|
* Bus timeout (but allow first EVEN and ODD byte to indicate
|
|
* timeout via vADBInt and SRQ status)
|
|
*/
|
|
s->adb_data_in[0] = 0xff;
|
|
s->adb_data_in[1] = 0xff;
|
|
s->adb_data_in_size = 2;
|
|
}
|
|
|
|
/*
|
|
* If last command is TALK, store it for use by autopoll and adjust
|
|
* the autopoll mask accordingly
|
|
*/
|
|
if ((s->adb_data_out[0] & 0xc) == 0xc) {
|
|
s->adb_autopoll_cmd = s->adb_data_out[0];
|
|
|
|
autopoll_mask = 1 << (s->adb_autopoll_cmd >> 4);
|
|
adb_set_autopoll_mask(adb_bus, autopoll_mask);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void adb_via_receive(MacVIAState *s, int state, uint8_t *data)
|
|
{
|
|
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&s->mos6522_via1);
|
|
MOS6522State *ms = MOS6522(v1s);
|
|
ADBBusState *adb_bus = &s->adb_bus;
|
|
uint16_t pending;
|
|
|
|
switch (state) {
|
|
case ADB_STATE_NEW:
|
|
ms->b |= VIA1B_vADBInt;
|
|
return;
|
|
|
|
case ADB_STATE_IDLE:
|
|
/*
|
|
* Since adb_request() will have already consumed the data from the
|
|
* device, we must detect this extra state change and re-inject the
|
|
* reponse as either a "fake" autopoll reply or bus timeout
|
|
* accordingly
|
|
*/
|
|
if (s->adb_data_in_index == 0) {
|
|
if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
|
|
*data = 0xff;
|
|
ms->b |= VIA1B_vADBInt;
|
|
qemu_irq_raise(s->adb_data_ready);
|
|
} else if (s->adb_data_in_size > 0) {
|
|
adb_bus->status = ADB_STATUS_POLLREPLY;
|
|
*data = s->adb_autopoll_cmd;
|
|
ms->b &= ~VIA1B_vADBInt;
|
|
qemu_irq_raise(s->adb_data_ready);
|
|
}
|
|
} else {
|
|
ms->b |= VIA1B_vADBInt;
|
|
adb_autopoll_unblock(adb_bus);
|
|
}
|
|
|
|
trace_via1_adb_receive("IDLE", *data,
|
|
(ms->b & VIA1B_vADBInt) ? "+" : "-", adb_bus->status,
|
|
s->adb_data_in_index, s->adb_data_in_size);
|
|
|
|
break;
|
|
|
|
case ADB_STATE_EVEN:
|
|
case ADB_STATE_ODD:
|
|
switch (s->adb_data_in_index) {
|
|
case 0:
|
|
/* First EVEN byte: vADBInt indicates bus timeout */
|
|
trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
|
|
*data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
|
|
adb_bus->status, s->adb_data_in_index,
|
|
s->adb_data_in_size);
|
|
|
|
*data = s->adb_data_in[s->adb_data_in_index++];
|
|
if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
|
|
ms->b &= ~VIA1B_vADBInt;
|
|
} else {
|
|
ms->b |= VIA1B_vADBInt;
|
|
}
|
|
break;
|
|
|
|
case 1:
|
|
/* First ODD byte: vADBInt indicates SRQ */
|
|
trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
|
|
*data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
|
|
adb_bus->status, s->adb_data_in_index,
|
|
s->adb_data_in_size);
|
|
|
|
*data = s->adb_data_in[s->adb_data_in_index++];
|
|
pending = adb_bus->pending & ~(1 << (s->adb_autopoll_cmd >> 4));
|
|
if (pending) {
|
|
ms->b &= ~VIA1B_vADBInt;
|
|
} else {
|
|
ms->b |= VIA1B_vADBInt;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
/*
|
|
* Otherwise vADBInt indicates end of data. Note that Linux
|
|
* specifically checks for the sequence 0x0 0xff to confirm the
|
|
* end of the poll reply, so provide these extra bytes below to
|
|
* keep it happy
|
|
*/
|
|
trace_via1_adb_receive(state == ADB_STATE_EVEN ? "EVEN" : " ODD",
|
|
*data, (ms->b & VIA1B_vADBInt) ? "+" : "-",
|
|
adb_bus->status, s->adb_data_in_index,
|
|
s->adb_data_in_size);
|
|
|
|
if (s->adb_data_in_index < s->adb_data_in_size) {
|
|
/* Next data byte */
|
|
*data = s->adb_data_in[s->adb_data_in_index++];
|
|
ms->b |= VIA1B_vADBInt;
|
|
} else if (s->adb_data_in_index == s->adb_data_in_size) {
|
|
if (adb_bus->status & ADB_STATUS_BUSTIMEOUT) {
|
|
/* Bus timeout (no more data) */
|
|
*data = 0xff;
|
|
} else {
|
|
/* Return 0x0 after reply */
|
|
*data = 0;
|
|
}
|
|
s->adb_data_in_index++;
|
|
ms->b &= ~VIA1B_vADBInt;
|
|
} else {
|
|
/* Bus timeout (no more data) */
|
|
*data = 0xff;
|
|
ms->b &= ~VIA1B_vADBInt;
|
|
adb_bus->status = 0;
|
|
adb_autopoll_unblock(adb_bus);
|
|
}
|
|
break;
|
|
}
|
|
|
|
qemu_irq_raise(s->adb_data_ready);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void via1_adb_update(MacVIAState *m)
|
|
{
|
|
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(&m->mos6522_via1);
|
|
MOS6522State *s = MOS6522(v1s);
|
|
int oldstate, state;
|
|
|
|
oldstate = (v1s->last_b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
|
|
state = (s->b & VIA1B_vADB_StateMask) >> VIA1B_vADB_StateShift;
|
|
|
|
if (state != oldstate) {
|
|
if (s->acr & VIA1ACR_vShiftOut) {
|
|
/* output mode */
|
|
adb_via_send(m, state, s->sr);
|
|
} else {
|
|
/* input mode */
|
|
adb_via_receive(m, state, &s->sr);
|
|
}
|
|
}
|
|
}
|
|
|
|
static uint64_t mos6522_q800_via1_read(void *opaque, hwaddr addr, unsigned size)
|
|
{
|
|
MOS6522Q800VIA1State *s = MOS6522_Q800_VIA1(opaque);
|
|
MOS6522State *ms = MOS6522(s);
|
|
int64_t now = qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL);
|
|
|
|
/*
|
|
* If IRQs are disabled, timers are disabled, but we need to update
|
|
* VIA1_IRQ_VBLANK and VIA1_IRQ_ONE_SECOND bits in the IFR
|
|
*/
|
|
|
|
if (now >= s->next_VBL) {
|
|
ms->ifr |= VIA1_IRQ_VBLANK;
|
|
via1_VBL_update(s);
|
|
}
|
|
if (now >= s->next_second) {
|
|
ms->ifr |= VIA1_IRQ_ONE_SECOND;
|
|
via1_one_second_update(s);
|
|
}
|
|
|
|
addr = (addr >> 9) & 0xf;
|
|
return mos6522_read(ms, addr, size);
|
|
}
|
|
|
|
static void mos6522_q800_via1_write(void *opaque, hwaddr addr, uint64_t val,
|
|
unsigned size)
|
|
{
|
|
MOS6522Q800VIA1State *v1s = MOS6522_Q800_VIA1(opaque);
|
|
MacVIAState *m = container_of(v1s, MacVIAState, mos6522_via1);
|
|
MOS6522State *ms = MOS6522(v1s);
|
|
|
|
addr = (addr >> 9) & 0xf;
|
|
mos6522_write(ms, addr, val, size);
|
|
|
|
switch (addr) {
|
|
case VIA_REG_B:
|
|
via1_rtc_update(m);
|
|
via1_adb_update(m);
|
|
|
|
v1s->last_b = ms->b;
|
|
break;
|
|
}
|
|
|
|
via1_one_second_update(v1s);
|
|
via1_VBL_update(v1s);
|
|
}
|
|
|
|
static const MemoryRegionOps mos6522_q800_via1_ops = {
|
|
.read = mos6522_q800_via1_read,
|
|
.write = mos6522_q800_via1_write,
|
|
.endianness = DEVICE_BIG_ENDIAN,
|
|
.valid = {
|
|
.min_access_size = 1,
|
|
.max_access_size = 1,
|
|
},
|
|
};
|
|
|
|
static uint64_t mos6522_q800_via2_read(void *opaque, hwaddr addr, unsigned size)
|
|
{
|
|
MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
|
|
MOS6522State *ms = MOS6522(s);
|
|
|
|
addr = (addr >> 9) & 0xf;
|
|
return mos6522_read(ms, addr, size);
|
|
}
|
|
|
|
static void mos6522_q800_via2_write(void *opaque, hwaddr addr, uint64_t val,
|
|
unsigned size)
|
|
{
|
|
MOS6522Q800VIA2State *s = MOS6522_Q800_VIA2(opaque);
|
|
MOS6522State *ms = MOS6522(s);
|
|
|
|
addr = (addr >> 9) & 0xf;
|
|
mos6522_write(ms, addr, val, size);
|
|
}
|
|
|
|
static const MemoryRegionOps mos6522_q800_via2_ops = {
|
|
.read = mos6522_q800_via2_read,
|
|
.write = mos6522_q800_via2_write,
|
|
.endianness = DEVICE_BIG_ENDIAN,
|
|
.valid = {
|
|
.min_access_size = 1,
|
|
.max_access_size = 1,
|
|
},
|
|
};
|
|
|
|
static void mac_via_reset(DeviceState *dev)
|
|
{
|
|
MacVIAState *m = MAC_VIA(dev);
|
|
MOS6522Q800VIA1State *v1s = &m->mos6522_via1;
|
|
ADBBusState *adb_bus = &m->adb_bus;
|
|
|
|
adb_set_autopoll_enabled(adb_bus, true);
|
|
|
|
timer_del(v1s->VBL_timer);
|
|
v1s->next_VBL = 0;
|
|
timer_del(v1s->one_second_timer);
|
|
v1s->next_second = 0;
|
|
|
|
m->cmd = REG_EMPTY;
|
|
m->alt = REG_EMPTY;
|
|
}
|
|
|
|
static void mac_via_realize(DeviceState *dev, Error **errp)
|
|
{
|
|
MacVIAState *m = MAC_VIA(dev);
|
|
MOS6522State *ms;
|
|
ADBBusState *adb_bus = &m->adb_bus;
|
|
struct tm tm;
|
|
int ret;
|
|
|
|
/* Init VIAs 1 and 2 */
|
|
object_initialize_child(OBJECT(dev), "via1", &m->mos6522_via1,
|
|
TYPE_MOS6522_Q800_VIA1);
|
|
|
|
object_initialize_child(OBJECT(dev), "via2", &m->mos6522_via2,
|
|
TYPE_MOS6522_Q800_VIA2);
|
|
|
|
/* Pass through mos6522 output IRQs */
|
|
ms = MOS6522(&m->mos6522_via1);
|
|
object_property_add_alias(OBJECT(dev), "irq[0]", OBJECT(ms),
|
|
SYSBUS_DEVICE_GPIO_IRQ "[0]");
|
|
ms = MOS6522(&m->mos6522_via2);
|
|
object_property_add_alias(OBJECT(dev), "irq[1]", OBJECT(ms),
|
|
SYSBUS_DEVICE_GPIO_IRQ "[0]");
|
|
|
|
sysbus_realize(SYS_BUS_DEVICE(&m->mos6522_via1), &error_abort);
|
|
sysbus_realize(SYS_BUS_DEVICE(&m->mos6522_via2), &error_abort);
|
|
|
|
/* Pass through mos6522 input IRQs */
|
|
qdev_pass_gpios(DEVICE(&m->mos6522_via1), dev, "via1-irq");
|
|
qdev_pass_gpios(DEVICE(&m->mos6522_via2), dev, "via2-irq");
|
|
|
|
/* VIA 1 */
|
|
m->mos6522_via1.one_second_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
|
|
via1_one_second,
|
|
&m->mos6522_via1);
|
|
m->mos6522_via1.VBL_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, via1_VBL,
|
|
&m->mos6522_via1);
|
|
|
|
qemu_get_timedate(&tm, 0);
|
|
m->tick_offset = (uint32_t)mktimegm(&tm) + RTC_OFFSET;
|
|
|
|
adb_register_autopoll_callback(adb_bus, adb_via_poll, m);
|
|
m->adb_data_ready = qdev_get_gpio_in_named(dev, "via1-irq",
|
|
VIA1_IRQ_ADB_READY_BIT);
|
|
|
|
if (m->blk) {
|
|
int64_t len = blk_getlength(m->blk);
|
|
if (len < 0) {
|
|
error_setg_errno(errp, -len,
|
|
"could not get length of backing image");
|
|
return;
|
|
}
|
|
ret = blk_set_perm(m->blk,
|
|
BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE,
|
|
BLK_PERM_ALL, errp);
|
|
if (ret < 0) {
|
|
return;
|
|
}
|
|
|
|
len = blk_pread(m->blk, 0, m->mos6522_via1.PRAM,
|
|
sizeof(m->mos6522_via1.PRAM));
|
|
if (len != sizeof(m->mos6522_via1.PRAM)) {
|
|
error_setg(errp, "can't read PRAM contents");
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void mac_via_init(Object *obj)
|
|
{
|
|
SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
|
|
MacVIAState *m = MAC_VIA(obj);
|
|
|
|
/* MMIO */
|
|
memory_region_init(&m->mmio, obj, "mac-via", 2 * VIA_SIZE);
|
|
sysbus_init_mmio(sbd, &m->mmio);
|
|
|
|
memory_region_init_io(&m->via1mem, obj, &mos6522_q800_via1_ops,
|
|
&m->mos6522_via1, "via1", VIA_SIZE);
|
|
memory_region_add_subregion(&m->mmio, 0x0, &m->via1mem);
|
|
|
|
memory_region_init_io(&m->via2mem, obj, &mos6522_q800_via2_ops,
|
|
&m->mos6522_via2, "via2", VIA_SIZE);
|
|
memory_region_add_subregion(&m->mmio, VIA_SIZE, &m->via2mem);
|
|
|
|
/* ADB */
|
|
qbus_create_inplace((BusState *)&m->adb_bus, sizeof(m->adb_bus),
|
|
TYPE_ADB_BUS, DEVICE(obj), "adb.0");
|
|
}
|
|
|
|
static void postload_update_cb(void *opaque, int running, RunState state)
|
|
{
|
|
MacVIAState *m = MAC_VIA(opaque);
|
|
|
|
qemu_del_vm_change_state_handler(m->vmstate);
|
|
m->vmstate = NULL;
|
|
|
|
pram_update(m);
|
|
}
|
|
|
|
static int mac_via_post_load(void *opaque, int version_id)
|
|
{
|
|
MacVIAState *m = MAC_VIA(opaque);
|
|
|
|
if (m->blk) {
|
|
m->vmstate = qemu_add_vm_change_state_handler(postload_update_cb,
|
|
m);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const VMStateDescription vmstate_mac_via = {
|
|
.name = "mac-via",
|
|
.version_id = 2,
|
|
.minimum_version_id = 2,
|
|
.post_load = mac_via_post_load,
|
|
.fields = (VMStateField[]) {
|
|
/* VIAs */
|
|
VMSTATE_STRUCT(mos6522_via1.parent_obj, MacVIAState, 0, vmstate_mos6522,
|
|
MOS6522State),
|
|
VMSTATE_UINT8(mos6522_via1.last_b, MacVIAState),
|
|
VMSTATE_BUFFER(mos6522_via1.PRAM, MacVIAState),
|
|
VMSTATE_TIMER_PTR(mos6522_via1.one_second_timer, MacVIAState),
|
|
VMSTATE_INT64(mos6522_via1.next_second, MacVIAState),
|
|
VMSTATE_TIMER_PTR(mos6522_via1.VBL_timer, MacVIAState),
|
|
VMSTATE_INT64(mos6522_via1.next_VBL, MacVIAState),
|
|
VMSTATE_STRUCT(mos6522_via2.parent_obj, MacVIAState, 0, vmstate_mos6522,
|
|
MOS6522State),
|
|
/* RTC */
|
|
VMSTATE_UINT32(tick_offset, MacVIAState),
|
|
VMSTATE_UINT8(data_out, MacVIAState),
|
|
VMSTATE_INT32(data_out_cnt, MacVIAState),
|
|
VMSTATE_UINT8(data_in, MacVIAState),
|
|
VMSTATE_UINT8(data_in_cnt, MacVIAState),
|
|
VMSTATE_UINT8(cmd, MacVIAState),
|
|
VMSTATE_INT32(wprotect, MacVIAState),
|
|
VMSTATE_INT32(alt, MacVIAState),
|
|
/* ADB */
|
|
VMSTATE_INT32(adb_data_in_size, MacVIAState),
|
|
VMSTATE_INT32(adb_data_in_index, MacVIAState),
|
|
VMSTATE_INT32(adb_data_out_index, MacVIAState),
|
|
VMSTATE_BUFFER(adb_data_in, MacVIAState),
|
|
VMSTATE_BUFFER(adb_data_out, MacVIAState),
|
|
VMSTATE_UINT8(adb_autopoll_cmd, MacVIAState),
|
|
VMSTATE_END_OF_LIST()
|
|
}
|
|
};
|
|
|
|
static Property mac_via_properties[] = {
|
|
DEFINE_PROP_DRIVE("drive", MacVIAState, blk),
|
|
DEFINE_PROP_END_OF_LIST(),
|
|
};
|
|
|
|
static void mac_via_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(oc);
|
|
|
|
dc->realize = mac_via_realize;
|
|
dc->reset = mac_via_reset;
|
|
dc->vmsd = &vmstate_mac_via;
|
|
device_class_set_props(dc, mac_via_properties);
|
|
}
|
|
|
|
static TypeInfo mac_via_info = {
|
|
.name = TYPE_MAC_VIA,
|
|
.parent = TYPE_SYS_BUS_DEVICE,
|
|
.instance_size = sizeof(MacVIAState),
|
|
.instance_init = mac_via_init,
|
|
.class_init = mac_via_class_init,
|
|
};
|
|
|
|
/* VIA 1 */
|
|
static void mos6522_q800_via1_reset(DeviceState *dev)
|
|
{
|
|
MOS6522State *ms = MOS6522(dev);
|
|
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms);
|
|
|
|
mdc->parent_reset(dev);
|
|
|
|
ms->timers[0].frequency = VIA_TIMER_FREQ;
|
|
ms->timers[1].frequency = VIA_TIMER_FREQ;
|
|
|
|
ms->b = VIA1B_vADB_StateMask | VIA1B_vADBInt | VIA1B_vRTCEnb;
|
|
}
|
|
|
|
static void mos6522_q800_via1_init(Object *obj)
|
|
{
|
|
qdev_init_gpio_in_named(DEVICE(obj), via1_irq_request, "via1-irq",
|
|
VIA1_IRQ_NB);
|
|
}
|
|
|
|
static void mos6522_q800_via1_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(oc);
|
|
|
|
dc->reset = mos6522_q800_via1_reset;
|
|
}
|
|
|
|
static const TypeInfo mos6522_q800_via1_type_info = {
|
|
.name = TYPE_MOS6522_Q800_VIA1,
|
|
.parent = TYPE_MOS6522,
|
|
.instance_size = sizeof(MOS6522Q800VIA1State),
|
|
.instance_init = mos6522_q800_via1_init,
|
|
.class_init = mos6522_q800_via1_class_init,
|
|
};
|
|
|
|
/* VIA 2 */
|
|
static void mos6522_q800_via2_portB_write(MOS6522State *s)
|
|
{
|
|
if (s->dirb & VIA2B_vPower && (s->b & VIA2B_vPower) == 0) {
|
|
/* shutdown */
|
|
qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN);
|
|
}
|
|
}
|
|
|
|
static void mos6522_q800_via2_reset(DeviceState *dev)
|
|
{
|
|
MOS6522State *ms = MOS6522(dev);
|
|
MOS6522DeviceClass *mdc = MOS6522_DEVICE_GET_CLASS(ms);
|
|
|
|
mdc->parent_reset(dev);
|
|
|
|
ms->timers[0].frequency = VIA_TIMER_FREQ;
|
|
ms->timers[1].frequency = VIA_TIMER_FREQ;
|
|
|
|
ms->dirb = 0;
|
|
ms->b = 0;
|
|
}
|
|
|
|
static void mos6522_q800_via2_init(Object *obj)
|
|
{
|
|
qdev_init_gpio_in_named(DEVICE(obj), via2_irq_request, "via2-irq",
|
|
VIA2_IRQ_NB);
|
|
}
|
|
|
|
static void mos6522_q800_via2_class_init(ObjectClass *oc, void *data)
|
|
{
|
|
DeviceClass *dc = DEVICE_CLASS(oc);
|
|
MOS6522DeviceClass *mdc = MOS6522_DEVICE_CLASS(oc);
|
|
|
|
dc->reset = mos6522_q800_via2_reset;
|
|
mdc->portB_write = mos6522_q800_via2_portB_write;
|
|
}
|
|
|
|
static const TypeInfo mos6522_q800_via2_type_info = {
|
|
.name = TYPE_MOS6522_Q800_VIA2,
|
|
.parent = TYPE_MOS6522,
|
|
.instance_size = sizeof(MOS6522Q800VIA2State),
|
|
.instance_init = mos6522_q800_via2_init,
|
|
.class_init = mos6522_q800_via2_class_init,
|
|
};
|
|
|
|
static void mac_via_register_types(void)
|
|
{
|
|
type_register_static(&mos6522_q800_via1_type_info);
|
|
type_register_static(&mos6522_q800_via2_type_info);
|
|
type_register_static(&mac_via_info);
|
|
}
|
|
|
|
type_init(mac_via_register_types);
|