qemu-patch-raspberry4/hw/intc/xics_kvm.c
Greg Kurz 894ea3ecd3 spapr/xics: Configure number of servers in KVM
The XICS-on-XIVE KVM devices now has an attribute to configure the number
of interrupt servers. This allows to greatly optimize the usage of the VP
space in the XIVE HW, and thus to start a lot more VMs.

Only set this attribute if available in order to support older POWER9 KVM
and pre-POWER9 XICS KVM devices.

The XICS-on-XIVE KVM device now reports the exhaustion of VPs upon the
connection of the first VCPU. Check that in order to have a chance to
provide a hint to the user.
`
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <157478678846.67101.9660531022460517710.stgit@bahia.tlslab.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2019-12-17 10:39:48 +11:00

513 lines
14 KiB
C

/*
* QEMU PowerPC pSeries Logical Partition (aka sPAPR) hardware System Emulator
*
* PAPR Virtualized Interrupt System, aka ICS/ICP aka xics, in-kernel emulation
*
* Copyright (c) 2013 David Gibson, IBM Corporation.
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
*/
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "qemu-common.h"
#include "cpu.h"
#include "trace.h"
#include "sysemu/kvm.h"
#include "hw/ppc/spapr.h"
#include "hw/ppc/spapr_cpu_core.h"
#include "hw/ppc/xics.h"
#include "hw/ppc/xics_spapr.h"
#include "kvm_ppc.h"
#include "qemu/config-file.h"
#include "qemu/error-report.h"
#include <sys/ioctl.h>
static int kernel_xics_fd = -1;
typedef struct KVMEnabledICP {
unsigned long vcpu_id;
QLIST_ENTRY(KVMEnabledICP) node;
} KVMEnabledICP;
static QLIST_HEAD(, KVMEnabledICP)
kvm_enabled_icps = QLIST_HEAD_INITIALIZER(&kvm_enabled_icps);
static void kvm_disable_icps(void)
{
KVMEnabledICP *enabled_icp, *next;
QLIST_FOREACH_SAFE(enabled_icp, &kvm_enabled_icps, node, next) {
QLIST_REMOVE(enabled_icp, node);
g_free(enabled_icp);
}
}
/*
* ICP-KVM
*/
void icp_get_kvm_state(ICPState *icp)
{
uint64_t state;
int ret;
/* The KVM XICS device is not in use */
if (kernel_xics_fd == -1) {
return;
}
/* ICP for this CPU thread is not in use, exiting */
if (!icp->cs) {
return;
}
ret = kvm_get_one_reg(icp->cs, KVM_REG_PPC_ICP_STATE, &state);
if (ret != 0) {
error_report("Unable to retrieve KVM interrupt controller state"
" for CPU %ld: %s", kvm_arch_vcpu_id(icp->cs), strerror(errno));
exit(1);
}
icp->xirr = state >> KVM_REG_PPC_ICP_XISR_SHIFT;
icp->mfrr = (state >> KVM_REG_PPC_ICP_MFRR_SHIFT)
& KVM_REG_PPC_ICP_MFRR_MASK;
icp->pending_priority = (state >> KVM_REG_PPC_ICP_PPRI_SHIFT)
& KVM_REG_PPC_ICP_PPRI_MASK;
}
static void do_icp_synchronize_state(CPUState *cpu, run_on_cpu_data arg)
{
icp_get_kvm_state(arg.host_ptr);
}
void icp_synchronize_state(ICPState *icp)
{
if (icp->cs) {
run_on_cpu(icp->cs, do_icp_synchronize_state, RUN_ON_CPU_HOST_PTR(icp));
}
}
int icp_set_kvm_state(ICPState *icp, Error **errp)
{
uint64_t state;
int ret;
/* The KVM XICS device is not in use */
if (kernel_xics_fd == -1) {
return 0;
}
/* ICP for this CPU thread is not in use, exiting */
if (!icp->cs) {
return 0;
}
state = ((uint64_t)icp->xirr << KVM_REG_PPC_ICP_XISR_SHIFT)
| ((uint64_t)icp->mfrr << KVM_REG_PPC_ICP_MFRR_SHIFT)
| ((uint64_t)icp->pending_priority << KVM_REG_PPC_ICP_PPRI_SHIFT);
ret = kvm_set_one_reg(icp->cs, KVM_REG_PPC_ICP_STATE, &state);
if (ret < 0) {
error_setg_errno(errp, -ret,
"Unable to restore KVM interrupt controller state (0x%"
PRIx64 ") for CPU %ld", state,
kvm_arch_vcpu_id(icp->cs));
return ret;
}
return 0;
}
void icp_kvm_realize(DeviceState *dev, Error **errp)
{
ICPState *icp = ICP(dev);
CPUState *cs;
KVMEnabledICP *enabled_icp;
unsigned long vcpu_id;
int ret;
/* The KVM XICS device is not in use */
if (kernel_xics_fd == -1) {
return;
}
cs = icp->cs;
vcpu_id = kvm_arch_vcpu_id(cs);
/*
* If we are reusing a parked vCPU fd corresponding to the CPU
* which was hot-removed earlier we don't have to renable
* KVM_CAP_IRQ_XICS capability again.
*/
QLIST_FOREACH(enabled_icp, &kvm_enabled_icps, node) {
if (enabled_icp->vcpu_id == vcpu_id) {
return;
}
}
ret = kvm_vcpu_enable_cap(cs, KVM_CAP_IRQ_XICS, 0, kernel_xics_fd, vcpu_id);
if (ret < 0) {
Error *local_err = NULL;
error_setg(&local_err, "Unable to connect CPU%ld to kernel XICS: %s",
vcpu_id, strerror(errno));
if (errno == ENOSPC) {
error_append_hint(&local_err, "Try -smp maxcpus=N with N < %u\n",
MACHINE(qdev_get_machine())->smp.max_cpus);
}
error_propagate(errp, local_err);
return;
}
enabled_icp = g_malloc(sizeof(*enabled_icp));
enabled_icp->vcpu_id = vcpu_id;
QLIST_INSERT_HEAD(&kvm_enabled_icps, enabled_icp, node);
}
/*
* ICS-KVM
*/
void ics_get_kvm_state(ICSState *ics)
{
uint64_t state;
int i;
/* The KVM XICS device is not in use */
if (kernel_xics_fd == -1) {
return;
}
for (i = 0; i < ics->nr_irqs; i++) {
ICSIRQState *irq = &ics->irqs[i];
if (ics_irq_free(ics, i)) {
continue;
}
kvm_device_access(kernel_xics_fd, KVM_DEV_XICS_GRP_SOURCES,
i + ics->offset, &state, false, &error_fatal);
irq->server = state & KVM_XICS_DESTINATION_MASK;
irq->saved_priority = (state >> KVM_XICS_PRIORITY_SHIFT)
& KVM_XICS_PRIORITY_MASK;
/*
* To be consistent with the software emulation in xics.c, we
* split out the masked state + priority that we get from the
* kernel into 'current priority' (0xff if masked) and
* 'saved priority' (if masked, this is the priority the
* interrupt had before it was masked). Masking and unmasking
* are done with the ibm,int-off and ibm,int-on RTAS calls.
*/
if (state & KVM_XICS_MASKED) {
irq->priority = 0xff;
} else {
irq->priority = irq->saved_priority;
}
irq->status = 0;
if (state & KVM_XICS_PENDING) {
if (state & KVM_XICS_LEVEL_SENSITIVE) {
irq->status |= XICS_STATUS_ASSERTED;
} else {
/*
* A pending edge-triggered interrupt (or MSI)
* must have been rejected previously when we
* first detected it and tried to deliver it,
* so mark it as pending and previously rejected
* for consistency with how xics.c works.
*/
irq->status |= XICS_STATUS_MASKED_PENDING
| XICS_STATUS_REJECTED;
}
}
if (state & KVM_XICS_PRESENTED) {
irq->status |= XICS_STATUS_PRESENTED;
}
if (state & KVM_XICS_QUEUED) {
irq->status |= XICS_STATUS_QUEUED;
}
}
}
void ics_synchronize_state(ICSState *ics)
{
ics_get_kvm_state(ics);
}
int ics_set_kvm_state_one(ICSState *ics, int srcno, Error **errp)
{
uint64_t state;
ICSIRQState *irq = &ics->irqs[srcno];
int ret;
/* The KVM XICS device is not in use */
if (kernel_xics_fd == -1) {
return 0;
}
state = irq->server;
state |= (uint64_t)(irq->saved_priority & KVM_XICS_PRIORITY_MASK)
<< KVM_XICS_PRIORITY_SHIFT;
if (irq->priority != irq->saved_priority) {
assert(irq->priority == 0xff);
}
if (irq->priority == 0xff) {
state |= KVM_XICS_MASKED;
}
if (irq->flags & XICS_FLAGS_IRQ_LSI) {
state |= KVM_XICS_LEVEL_SENSITIVE;
if (irq->status & XICS_STATUS_ASSERTED) {
state |= KVM_XICS_PENDING;
}
} else {
if (irq->status & XICS_STATUS_MASKED_PENDING) {
state |= KVM_XICS_PENDING;
}
}
if (irq->status & XICS_STATUS_PRESENTED) {
state |= KVM_XICS_PRESENTED;
}
if (irq->status & XICS_STATUS_QUEUED) {
state |= KVM_XICS_QUEUED;
}
ret = kvm_device_access(kernel_xics_fd, KVM_DEV_XICS_GRP_SOURCES,
srcno + ics->offset, &state, true, errp);
if (ret < 0) {
return ret;
}
return 0;
}
int ics_set_kvm_state(ICSState *ics, Error **errp)
{
int i;
/* The KVM XICS device is not in use */
if (kernel_xics_fd == -1) {
return 0;
}
for (i = 0; i < ics->nr_irqs; i++) {
Error *local_err = NULL;
int ret;
if (ics_irq_free(ics, i)) {
continue;
}
ret = ics_set_kvm_state_one(ics, i, &local_err);
if (ret < 0) {
error_propagate(errp, local_err);
return ret;
}
}
return 0;
}
void ics_kvm_set_irq(ICSState *ics, int srcno, int val)
{
struct kvm_irq_level args;
int rc;
/* The KVM XICS device should be in use */
assert(kernel_xics_fd != -1);
args.irq = srcno + ics->offset;
if (ics->irqs[srcno].flags & XICS_FLAGS_IRQ_MSI) {
if (!val) {
return;
}
args.level = KVM_INTERRUPT_SET;
} else {
args.level = val ? KVM_INTERRUPT_SET_LEVEL : KVM_INTERRUPT_UNSET;
}
rc = kvm_vm_ioctl(kvm_state, KVM_IRQ_LINE, &args);
if (rc < 0) {
perror("kvm_irq_line");
}
}
int xics_kvm_connect(SpaprInterruptController *intc, uint32_t nr_servers,
Error **errp)
{
ICSState *ics = ICS_SPAPR(intc);
int rc;
CPUState *cs;
Error *local_err = NULL;
/*
* The KVM XICS device already in use. This is the case when
* rebooting under the XICS-only interrupt mode.
*/
if (kernel_xics_fd != -1) {
return 0;
}
if (!kvm_enabled() || !kvm_check_extension(kvm_state, KVM_CAP_IRQ_XICS)) {
error_setg(errp,
"KVM and IRQ_XICS capability must be present for in-kernel XICS");
return -1;
}
rc = kvmppc_define_rtas_kernel_token(RTAS_IBM_SET_XIVE, "ibm,set-xive");
if (rc < 0) {
error_setg_errno(&local_err, -rc,
"kvmppc_define_rtas_kernel_token: ibm,set-xive");
goto fail;
}
rc = kvmppc_define_rtas_kernel_token(RTAS_IBM_GET_XIVE, "ibm,get-xive");
if (rc < 0) {
error_setg_errno(&local_err, -rc,
"kvmppc_define_rtas_kernel_token: ibm,get-xive");
goto fail;
}
rc = kvmppc_define_rtas_kernel_token(RTAS_IBM_INT_ON, "ibm,int-on");
if (rc < 0) {
error_setg_errno(&local_err, -rc,
"kvmppc_define_rtas_kernel_token: ibm,int-on");
goto fail;
}
rc = kvmppc_define_rtas_kernel_token(RTAS_IBM_INT_OFF, "ibm,int-off");
if (rc < 0) {
error_setg_errno(&local_err, -rc,
"kvmppc_define_rtas_kernel_token: ibm,int-off");
goto fail;
}
/* Create the KVM XICS device */
rc = kvm_create_device(kvm_state, KVM_DEV_TYPE_XICS, false);
if (rc < 0) {
error_setg_errno(&local_err, -rc, "Error on KVM_CREATE_DEVICE for XICS");
goto fail;
}
/* Tell KVM about the # of VCPUs we may have (POWER9 and newer only) */
if (kvm_device_check_attr(rc, KVM_DEV_XICS_GRP_CTRL,
KVM_DEV_XICS_NR_SERVERS)) {
if (kvm_device_access(rc, KVM_DEV_XICS_GRP_CTRL,
KVM_DEV_XICS_NR_SERVERS, &nr_servers, true,
&local_err)) {
goto fail;
}
}
kernel_xics_fd = rc;
kvm_kernel_irqchip = true;
kvm_msi_via_irqfd_allowed = true;
kvm_gsi_direct_mapping = true;
/* Create the presenters */
CPU_FOREACH(cs) {
PowerPCCPU *cpu = POWERPC_CPU(cs);
icp_kvm_realize(DEVICE(spapr_cpu_state(cpu)->icp), &local_err);
if (local_err) {
goto fail;
}
}
/* Update the KVM sources */
ics_set_kvm_state(ics, &local_err);
if (local_err) {
goto fail;
}
/* Connect the presenters to the initial VCPUs of the machine */
CPU_FOREACH(cs) {
PowerPCCPU *cpu = POWERPC_CPU(cs);
icp_set_kvm_state(spapr_cpu_state(cpu)->icp, &local_err);
if (local_err) {
goto fail;
}
}
return 0;
fail:
error_propagate(errp, local_err);
xics_kvm_disconnect(intc);
return -1;
}
void xics_kvm_disconnect(SpaprInterruptController *intc)
{
/*
* Only on P9 using the XICS-on XIVE KVM device:
*
* When the KVM device fd is closed, the device is destroyed and
* removed from the list of devices of the VM. The VCPU presenters
* are also detached from the device.
*/
if (kernel_xics_fd != -1) {
close(kernel_xics_fd);
kernel_xics_fd = -1;
}
kvmppc_define_rtas_kernel_token(0, "ibm,set-xive");
kvmppc_define_rtas_kernel_token(0, "ibm,get-xive");
kvmppc_define_rtas_kernel_token(0, "ibm,int-on");
kvmppc_define_rtas_kernel_token(0, "ibm,int-off");
kvm_kernel_irqchip = false;
kvm_msi_via_irqfd_allowed = false;
kvm_gsi_direct_mapping = false;
/* Clear the presenter from the VCPUs */
kvm_disable_icps();
}
/*
* This is a heuristic to detect older KVMs on POWER9 hosts that don't
* support destruction of a KVM XICS device while the VM is running.
* Required to start a spapr machine with ic-mode=dual,kernel-irqchip=on.
*/
bool xics_kvm_has_broken_disconnect(SpaprMachineState *spapr)
{
int rc;
rc = kvm_create_device(kvm_state, KVM_DEV_TYPE_XICS, false);
if (rc < 0) {
/*
* The error is ignored on purpose. The KVM XICS setup code
* will catch it again anyway. The goal here is to see if
* close() actually destroys the device or not.
*/
return false;
}
close(rc);
rc = kvm_create_device(kvm_state, KVM_DEV_TYPE_XICS, false);
if (rc >= 0) {
close(rc);
return false;
}
return errno == EEXIST;
}