There are many existing qcow2 images that specify a backing file but no format. This has been the source of CVEs in the past, but has become more prominent of a problem now that libvirt has switched to -blockdev. With older -drive, at least the probing was always done by qemu (so the only risk of a changed format between successive boots of a guest was if qemu was upgraded and probed differently). But with newer -blockdev, libvirt must specify a format; if libvirt guesses raw where the image was formatted, this results in data corruption visible to the guest; conversely, if libvirt guesses qcow2 where qemu was using raw, this can result in potential security holes, so modern libvirt instead refuses to use images without explicit backing format. The change in libvirt to reject images without explicit backing format has pointed out that a number of tools have been far too reliant on probing in the past. It's time to set a better example in our own iotests of properly setting this parameter. iotest calls to create, rebase, and convert are all impacted to some degree. It's a bit annoying that we are inconsistent on command line - while all of those accept -o backing_file=...,backing_fmt=..., the shortcuts are different: create and rebase have -b and -F, while convert has -B but no -F. (amend has no shortcuts, but the previous patch just deprecated the use of amend to change backing chains). Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20200706203954.341758-9-eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
117 lines
11 KiB
Plaintext
117 lines
11 KiB
Plaintext
QA output created by 085
|
|
Formatting 'TEST_DIR/t.IMGFMT.1', fmt=IMGFMT size=134217728
|
|
Formatting 'TEST_DIR/t.IMGFMT.2', fmt=IMGFMT size=134217728
|
|
|
|
=== Running QEMU ===
|
|
|
|
|
|
=== Sending capabilities ===
|
|
|
|
{ 'execute': 'qmp_capabilities' }
|
|
{"return": {}}
|
|
|
|
=== Create a single snapshot on virtio0 ===
|
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'snapshot-file':'TEST_DIR/1-snapshot-v0.IMGFMT', 'format': 'IMGFMT' } }
|
|
Formatting 'TEST_DIR/1-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/t.qcow2.1 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
|
|
=== Invalid command - missing device and nodename ===
|
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'snapshot-file':'TEST_DIR/1-snapshot-v0.IMGFMT', 'format': 'IMGFMT' } }
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device= nor node_name="}}
|
|
|
|
=== Invalid command - missing snapshot-file ===
|
|
|
|
{ 'execute': 'blockdev-snapshot-sync', 'arguments': { 'device': 'virtio0', 'format': 'IMGFMT' } }
|
|
{"error": {"class": "GenericError", "desc": "Parameter 'snapshot-file' is missing"}}
|
|
|
|
|
|
=== Create several transactional group snapshots ===
|
|
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/2-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/2-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/2-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/1-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/2-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/t.qcow2.2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/3-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/3-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/3-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/2-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/3-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/2-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/4-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/4-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/4-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/3-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/4-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/3-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/5-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/5-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/5-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/4-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/5-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/4-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/6-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/6-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/6-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/5-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/6-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/5-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/7-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/7-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/7-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/6-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/7-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/6-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/8-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/8-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/8-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/7-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/8-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/7-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/9-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/9-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/9-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/8-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/9-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/8-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
{ 'execute': 'transaction', 'arguments': {'actions': [ { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio0', 'snapshot-file': 'TEST_DIR/10-snapshot-v0.IMGFMT' } }, { 'type': 'blockdev-snapshot-sync', 'data' : { 'device': 'virtio1', 'snapshot-file': 'TEST_DIR/10-snapshot-v1.IMGFMT' } } ] } }
|
|
Formatting 'TEST_DIR/10-snapshot-v0.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/9-snapshot-v0.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
Formatting 'TEST_DIR/10-snapshot-v1.qcow2', fmt=qcow2 cluster_size=65536 compression_type=zlib size=134217728 backing_file=TEST_DIR/9-snapshot-v1.qcow2 backing_fmt=qcow2 lazy_refcounts=off refcount_bits=16
|
|
{"return": {}}
|
|
|
|
=== Create a couple of snapshots using blockdev-snapshot ===
|
|
|
|
Formatting 'TEST_DIR/11-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/10-snapshot-v0.IMGFMT backing_fmt=IMGFMT
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_11', 'backing': null, 'file': { 'driver': 'file', 'filename': 'TEST_DIR/11-snapshot-v0.IMGFMT', 'node-name': 'file_11' } } }
|
|
{"return": {}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_11' } }
|
|
{"return": {}}
|
|
Formatting 'TEST_DIR/12-snapshot-v0.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/11-snapshot-v0.IMGFMT backing_fmt=IMGFMT
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_12', 'backing': null, 'file': { 'driver': 'file', 'filename': 'TEST_DIR/12-snapshot-v0.IMGFMT', 'node-name': 'file_12' } } }
|
|
{"return": {}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_12' } }
|
|
{"return": {}}
|
|
|
|
=== Invalid command - cannot create a snapshot using a file BDS ===
|
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'file_12' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
|
|
=== Invalid command - snapshot node used as active layer ===
|
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_12' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'virtio0' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'virtio0', 'overlay':'virtio1' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
|
|
=== Invalid command - snapshot node used as backing hd ===
|
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_11' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay is already in use"}}
|
|
|
|
=== Invalid command - snapshot node has a backing image ===
|
|
|
|
Formatting 'TEST_DIR/t.IMGFMT.base', fmt=IMGFMT size=134217728
|
|
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=134217728 backing_file=TEST_DIR/t.IMGFMT.base backing_fmt=IMGFMT
|
|
{ 'execute': 'blockdev-add', 'arguments': { 'driver': 'IMGFMT', 'node-name': 'snap_13', 'file': { 'driver': 'file', 'filename': 'TEST_DIR/t.IMGFMT', 'node-name': 'file_13' } } }
|
|
{"return": {}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_13' } }
|
|
{"error": {"class": "GenericError", "desc": "The overlay already has a backing image"}}
|
|
|
|
=== Invalid command - The node does not exist ===
|
|
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node': 'virtio0', 'overlay':'snap_14' } }
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device=snap_14 nor node_name=snap_14"}}
|
|
{ 'execute': 'blockdev-snapshot', 'arguments': { 'node':'nodevice', 'overlay':'snap_13' } }
|
|
{"error": {"class": "GenericError", "desc": "Cannot find device=nodevice nor node_name=nodevice"}}
|
|
*** done
|