This removes some clutter in compilation logging, and allows some
easier tweaking per compilation unit/CFLAGS overriding.
Note that we can't move those define in os-win32.h, since they must be
set before the first system headers are included.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-3-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
osdep.h will also define the available Windows API version for QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20181122110039.15972-2-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The guest OS reads RSTAT, RSEQ, and RINTR, and expects those registers
to reflect a consistent state. However, it is possible that the registers
can change after RSTAT was read, but before RINTR is read, when
esp_command_complete() is called.
Guest OS qemu
-------- ----
[handle interrupt]
Read RSTAT
esp_command_complete()
RSTAT = STAT_ST
esp_dma_done()
RSTAT |= STAT_TC
RSEQ = 0
RINTR = INTR_BS
Read RSEQ
Read RINTR RINTR = 0
RSTAT &= ~STAT_TC
RSEQ = SEQ_CD
The guest OS would then try to handle INTR_BS combined with an old
value of RSTAT. This sometimes resulted in lost events, spurious
interrupts, guest OS confusion, and stalled SCSI operations.
A typical guest error log (observed with various versions of Linux)
looks as follows.
scsi host1: Spurious irq, sreg=13.
...
scsi host1: Aborting command [84531f10:2a]
scsi host1: Current command [f882eea8:35]
scsi host1: Queued command [84531f10:2a]
scsi host1: Active command [f882eea8:35]
scsi host1: Dumping command log
scsi host1: ent[15] CMD val[44] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[00] event[0c]
scsi host1: ent[16] CMD val[01] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c]
scsi host1: ent[17] CMD val[43] sreg[90] seqreg[00] sreg2[00] ireg[20] ss[02] event[0c]
scsi host1: ent[18] EVENT val[0d] sreg[92] seqreg[04] sreg2[00] ireg[18] ss[00] event[0c]
...
Defer handling command completion until previous interrupts have been
handled to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Per AM53C974 datasheet, definition of "SCSI Bus and Control (SBAC)"
register:
Bit 24 'STATUS' Write Erase Control
This bit controls the Write Erase feature on bits 3:1 and bit 6 of the DMA
Status Register ((B)+54h). When this bit is programmed to '1', the state
of bits 3:1 are preserved when read. Bits 3:1 are only cleared when a '1'
is written to the corresponding bit location. For example, to clear bit 1,
the value of '0000_0010b' should be written to the register. When the DMA
Status Preserve bit is '0', bits 3:1 are cleared when read.
The status register is currently defined to bit 12, not bit 24.
Also, its implementation is reversed: The status is auto-cleared if
the bit is set to 1, and must be cleared explicitly when the bit is
set to 0. This results in spurious interrupts reported by the Linux
kernel, and in some cases even results in stalled SCSI operations.
Set SBAC_STATUS to bit 24 and reverse the logic to fix the problem.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-Id: <1543442171-24863-1-git-send-email-linux@roeck-us.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The libiscsi iscsi_task_mgmt_async() API documentation says:
abort_task will also cancel the scsi task. The callback for the scsi
task will be invoked with SCSI_STATUS_CANCELLED
The libiscsi implementation does not fulfil this promise. The task's
callback is not invoked and its struct iscsi_pdu remains in the internal
list (effectively leaked).
This patch invokes the libiscsi iscsi_scsi_cancel_task() API to force
the task's callback to be invoked with SCSI_STATUS_CANCELLED when the
ABORT TASK TMF completes and the task's callback hasn't been invoked
yet.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180215111526.2464-1-stefanha@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iscsi_aio_cancel() does not increment the request's reference count,
causing a use-after-free when ABORT TASK finishes after the request has
already completed.
There are some additional issues with iscsi_aio_cancel():
1. Several ABORT TASKs may be sent for the same task if
iscsi_aio_cancel() is invoked multiple times. It's better to avoid
this just in case the command identifier is reused.
2. The iscsilun->mutex protection is missing in iscsi_aio_cancel().
Reported-by: Felipe Franciosi <felipe@nutanix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180203061621.7033-4-stefanha@redhat.com>
Reviewed-by: Felipe Franciosi <felipe@nutanix.com>
Tested-by: Sreejith Mohanan <sreejit.mohanan@nutanix.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit d045c466d9 ("iscsi: do not use
aio_context_acquire/release") introduced iscsilun->mutex but appears to
have overlooked iscsi_timed_check_events() when introducing the mutex.
iscsi_service() and iscsi_set_events() must be called with
iscsilun->mutex held.
iscsi_timed_check_events() is invoked from the AioContext and does not
take the mutex.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180203061621.7033-3-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The IscsiAIOCB->buf field has not been used since commit
e49ab19fca ("block/iscsi: bump libiscsi
requirement to 1.9.0"). It used to be a linear buffer for old libiscsi
versions that didn't support scatter-gather. The minimum libiscsi
version supports scatter-gather so we don't linearize buffers anymore.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20180203061621.7033-2-stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Intel HAXM supports now 32-bit and 64-bit Linux hosts. This patch includes
the corresponding userland changes.
Since the Darwin userland backend is POSIX-compliant, the hax-darwin.{c,h}
files have been renamed to hax-posix.{c,h}. This prefix is consistent with
the naming used in the rest of QEMU.
Signed-off-by: Alexandro Sanchez Bach <asanchez@kryptoslogic.com>
Message-Id: <20181115013331.65820-1-asanchez@kryptoslogic.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The e1000 driver calls memory_region_add_coalescing but
kvm_coalesce_mmio_region is never called for those regions. The bug
dates back to the introduction of the memory region API; to fix it,
delete and re-add coalesced MMIO ranges when building the FlatViews.
Because coalesced MMIO regions apply to all address spaces, the
has_coalesced_range flag has to be changed into an int.
Fixes: 093bc2cd88 ("Hierarchical memory region API")
Reported-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Store whether the FlatRange has had any coalesced I/O ranges applied,
and if not avoid calling coalesced_io_del. This is useful in preparation
for the next patch, which will call coalesced_io_del when rendering
memory regions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Extract two new functions from memory_region_update_coalesced_range_as.
To avoid duplication in the creation of the MemoryRegionSection, use
MEMORY_LISTENER_UPDATE_REGION instead of MEMORY_LISTENER_CALL
to invoke the listener callback.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add optional colors to make seeing message types a bit easier.
The default is to show them on a tty.
Inspired by Linux commits 57230297116fa ("checkpatch: colorize output
to terminal") and 737c0767758b ("checkpatch: change format of --color
argument to --color[=WHEN]").
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Similar to how patchew output looks like for multiple patches,
say what file or patch is being tested _before_ emitting errors.
This is clearer to a human that scans the output from top to
bottom.
In addition, provide a truncated commit hash and subject instead of
the full hash, and process the commits first-to-last rather than
last-to-first.
Inspired by Linux commit 0dea9f1eef86bedacad91b6f652ca1ab0d08854c
("checkpatch: reduce number of `git log` calls with --git", 2016-03-20).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull the test before the anticipated exits from the process sub.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In some cases, checkpatch's process subroutine is exiting the
whole process. This is wrong, just return from the subroutine
instead.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When compiling with "--disable-tcg", we currently still use "tcg"
as default accelerator. "kvm" should be used in this case instead.
Also, some downstream distros provide QEMU binaries which have "kvm"
in their names (e.g. "qemu-kvm" on RHEL or "kvm" on Ubuntu) that use
KVM by default - and some users might want to do something similar
with upstream binaries, too. Accomodate them by using "kvm:tcg" as
default when we detect such a binary name.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1538748792-19444-1-git-send-email-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux returns success if pwrite64() or pread64() are called with a
zero length NULL buffer, but QEMU was returning -TARGET_EFAULT.
This is the same bug that we fixed in commit 58cfa6c2e6
for the write syscall, and long before that in 38d840e679
for the read syscall.
Fixes: https://bugs.launchpad.net/qemu/+bug/1810433
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190108184900.9654-1-peter.maydell@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The definitions in the header are not used.
Also this fixes porting SPICE to Windows where the header is not
available.
Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190107184404.31993-1-fziglio@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Copy the content into the sl and sv files (the only ones left which are
not generated by qemu-keymap).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-4-kraxel@redhat.com
It doesn't define any keys, only includes "common".
Which makes it effectively an "en-us" map.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-3-kraxel@redhat.com
"common" is the only file using it, so we can just include it directly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181116104319.10329-2-kraxel@redhat.com
The qemu_create_display_surface_guestmem() function was added in
commit a77549b3ff but apparently never used. Remove it.
(The API of this function is in any case awkward as a generic
function: it assumes that a physical address uniquely identifies
a piece of memory in the system, which is mostly but not
always true.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20181122170309.4856-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Looking at chardev/spice.c code, I realize compilation was broken for
a while with spice-server < 0.12.3. Let's bump required version
to 0.12.5, released May 19 2014, instead of adding more #ifdef.
(this patch combines changes from an early version and some of
Frediano "[PATCH 2/2] spice: Bump required spice-server version to
0.12.6")
According to repology, all the distros that are build target platforms
for QEMU include it:
RHEL-7: 0.14.0
Debian (Stretch): 0.12.8
Debian (Jessie): 0.12.5
FreeBSD (ports): 0.14.0
OpenSUSE Leap 15: 0.14.0
Ubuntu (Xenial): 0.12.6
Note that a previous version of this patch was bumping version to
0.12.6. Unfortunately, Debian Jessie (oldstable) is stuck with spice
server 0.12.5, and QEMU should keep building until after 2y of current
stable (Stretch), which will be around June 17th 2019. Qemu 4.1
should thus be free of bumping to spice-server 0.12.6 during 4.1
development cycle.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-id: 20181128155932.16171-1-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We must set the correct context (via eglMakeCurrent) before
calling qemu_egl_create_context, so we need a thin wrapper and can't
hook qemu_egl_create_context directly as ->dpy_gl_ctx_create callback.
Reported-by: Frederik Carlier <frederik.carlier@quamotion.mobi>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20181129123502.30129-1-kraxel@redhat.com
Second main pull request for qemu-4.0. Highlights are:
* Final parts of XIVE support for pseries (without KVM)
* Preliminary work for PHB hotplug
* Starting to use TCG vector operations
This includes some changes in the PCI core, which Michael Tsirkin
requested come through this tree, since they're primarily of interest
for ppc.
-----BEGIN PGP SIGNATURE-----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=4Q/4
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.0-20190109' into staging
ppc patch queue 2019-01-09
Second main pull request for qemu-4.0. Highlights are:
* Final parts of XIVE support for pseries (without KVM)
* Preliminary work for PHB hotplug
* Starting to use TCG vector operations
This includes some changes in the PCI core, which Michael Tsirkin
requested come through this tree, since they're primarily of interest
for ppc.
# gpg: Signature made Tue 08 Jan 2019 22:44:10 GMT
# gpg: using RSA key 6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.0-20190109: (29 commits)
spapr: enable XIVE MMIOs at reset
spapr: introduce a new sPAPR IRQ backend supporting XIVE and XICS
ppc/xics: allow ICSState to have an offset 0
spapr: move the qemu_irq array under the machine
pnv/psi: move the ICSState qemu_irq array under the PSI device model
ppc: export the XICS and XIVE set_irq handlers
spapr: return from post_load method when RTC import fails
ppc: replace the 'Object *intc' by a 'ICPState *icp' pointer under the CPU
ppc/xive: introduce a XiveTCTX pointer under PowerPCCPU
spapr: modify the prototype of the cpu_intc_create() method
spapr/xive: simplify the sPAPR IRQ qirq method for XIVE
spapr_pci: Define SPAPR_MAX_PHBS in hw/pci-host/spapr.h
pci: allow cleanup/unregistration of PCI root buses
spapr: move spapr_create_phb() to core machine code
MAINTAINERS: add qemu_vga.ndrv file entry for Mac machines
MAINTAINERS: Add some missing ppc-related files
target/ppc: replace AVR* macros with Vsr* macros
target/ppc: move FP and VMX registers into aligned vsr register array
target/ppc: merge ppc_vsr_t and ppc_avr_t union types
target/ppc: switch FPR, VMX and VSX helpers to access data directly from cpu_env
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make them more QOMConventional.
Cc:qemu-trivial@nongnu.org
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20190105023831.66910-1-liq3ea@163.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
These files don't seem to do anything related to ISA directly, so
there is no need to include isa.h here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546615943-16274-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
This device does not use I2C, so no need to include the header file here.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1546614146-10525-1-git-send-email-thuth@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
QOM cpu.h uses fprintf_function which requires Qemu's
qemu/fprintf-fn.h header. Include it.
Signed-off-by: Priit Laes <plaes@plaes.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181226003722.31257-1-plaes@plaes.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Since the last time we sorted things (2988cbeaf), we've had a
few relapses that were inserted out of order. Also, we had more
entries that were sorted case-insensitively than not, so let's
document that convention and stick to it.
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20181115211752.1295571-2-eblake@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The Debian Sid repository is not garanteed to be stable, as his
'unstable' name suggest :)
To allow quick testing, Debian maintainers might push packages
various time a day. Sometime package dependencies might break,
which is annoying when using this repository for stable development
(which is not recommended, but Sid provides edge packages we use
for testing).
Debian provides repositories snapshots which are suitable for our
use. Pick a recent date that works. When required, update to newer
releases will be easy.
This fixes current issues with this image:
$ make docker-image-debian-sid
[...]
The following packages have unmet dependencies:
build-essential : Depends: dpkg-dev (>= 1.17.11) but it is not going to be installed
git : Depends: perl but it is not going to be installed
Depends: liberror-perl but it is not going to be installed
pkg-config : Depends: libdpkg-perl but it is not going to be installed
texinfo : Depends: perl (>= 5.26.2-6) but it is not going to be installed
Depends: libtext-unidecode-perl but it is not going to be installed
Depends: libxml-libxml-perl but it is not going to be installed
E: Unable to correct problems, you have held broken packages.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20181101183705.5422-1-philmd@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
When the IO size is larger than 2 pages, we move the the pointer one by
one in the pagelist, this is inefficient.
This is a simple benchmark result:
Before:
$ qemu-io -c 'write 0 1G' nvme://0000:00:04.0/1
wrote 1073741824/1073741824 bytes at offset 0
1 GiB, 1 ops; 0:00:02.41 (424.504 MiB/sec and 0.4146 ops/sec)
$ qemu-io -c 'read 0 1G' nvme://0000:00:04.0/1
read 1073741824/1073741824 bytes at offset 0
1 GiB, 1 ops; 0:00:02.03 (503.055 MiB/sec and 0.4913 ops/sec)
After:
$ qemu-io -c 'write 0 1G' nvme://0000:00:04.0/1
wrote 1073741824/1073741824 bytes at offset 0
1 GiB, 1 ops; 0:00:02.17 (471.517 MiB/sec and 0.4605 ops/sec)
$ qemu-io -c 'read 0 1G' nvme://0000:00:04.0/1
read 1073741824/1073741824 bytes at offset 0
1 GiB, 1 ops; 0:00:01.94 (526.770 MiB/sec and 0.5144 ops/sec)
Signed-off-by: Li Feng <lifeng1519@gmail.com>
Message-Id: <20181101103807.25862-1-lifeng1519@gmail.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Depending on the interrupt mode of the machine, enable or disable the
XIVE MMIOs.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The 'dual' sPAPR IRQ backend supports both interrupt mode, XIVE
exploitation mode and the legacy compatibility mode (XICS). both modes
are not supported at the same time.
The machine starts with the legacy mode and a new interrupt mode can
then be negotiated by the CAS process. In this case, the new mode is
activated after a reset to take into account the required changes in
the machine. These impact the device tree layout, the interrupt
presenter object and the exposed MMIO regions in the case of XIVE.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
commit 15ed653fa4 ("ppc/xics: An ICS with offset 0 is assumed to be
uninitialized") introduced an extra check on the ICS offset which is
not strictly necessary.
Revert the change to be able to map the XICS IRQ number space on the
XIVE IRQ number space.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The qemu_irq array is now allocated at the machine level using a sPAPR
IRQ set_irq handler depending on the chosen interrupt mode. The use of
this handler is slightly inefficient today but it will become necessary
when the 'dual' interrupt mode is introduced.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Future changes of the ICSState object will remove the qemu_irq array
from under the interrupt controller model. Prepare ground for the PSI
interrupt sources and introduce a new one directly under the PSI
device model.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
To support the 'dual' interrupt mode, XICS and XIVE, we plan to move
the qemu_irq array of each interrupt controller under the machine and
do the allocation under the sPAPR IRQ init method.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The error value can be squashed by the section handling radix migration.
Simply bail out if an error occurs when the RTC offset is imported.
This fixes the Coverity issue CID 1398591.
Fixes: d39c90f5f3 ("spapr: Fix migration of Radix guests")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Now that the 'intc' pointer is only used by the XICS interrupt mode,
let's make things clear and use a XICS type and name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
which will be used by the machine only when the XIVE interrupt mode is
in use.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>