Drop write notifiers and use filter node instead.
= Changes =
1. Add filter-node-name argument for backup qmp api. We have to do it
in this commit, as 257 needs to be fixed.
2. There are no more write notifiers here, so is_write_notifier
parameter is dropped from block-copy paths.
3. To sync with in-flight requests at job finish we now have drained
removing of the filter, we don't need rw-lock.
4. Block-copy is now using BdrvChildren instead of BlockBackends
5. As backup-top owns these children, we also move block-copy state
into backup-top's ownership.
= Iotest changes =
56: op-blocker doesn't shoot now, as we set it on source, but then
check on filter, when trying to start second backup.
To keep the test we instead can catch another collision: both jobs will
get 'drive0' job-id, as job-id parameter is unspecified. To prevent
interleaving with file-posix locks (as they are dependent on config)
let's use another target for second backup.
Also, it's obvious now that we'd like to drop this op-blocker at all
and add a test-case for two backups from one node (to different
destinations) actually works. But not in these series.
141: Output changed: prepatch, "Node is in use" comes from bdrv_has_blk
check inside qmp_blockdev_del. But we've dropped block-copy blk
objects, so no more blk objects on source bs (job blk is on backup-top
filter bs). New message is from op-blocker, which is the next check in
qmp_blockdev_add.
257: The test wants to emulate guest write during backup. They should
go to filter node, not to original source node, of course. Therefore we
need to specify filter node name and use it.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-6-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Backup-top filter caches write operations and does copy-before-write
operations.
The driver will be used in backup instead of write-notifiers.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-5-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split block_copy_set_callbacks out of block_copy_state_new. It's needed
for further commit: block-copy will use BdrvChildren of backup-top
filter, so it will be created from backup-top filter creation function.
But callbacks will still belong to backup job and will be set in
separate.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-4-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
This is logic-less refactoring, which simplifies further patch, as
we'll need write_flags for backup-top filter creation and backup-top
should be created before block job creation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-3-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Move synchronization mechanism to block-copy, to be able to use one
block-copy instance from backup job and backup-top filter in parallel.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191001131409.14202-2-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
125 should not use qemu-img to get the on-disk image size, because that
reports it in a human-readable format that is useless to us. Just use
stat instead (like we do to get the image file length).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190925183231.11196-4-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
And by that I mean all XFS versions, as far as I can tell. All details
are in the comment below.
We never noticed this problem because we only read the first number from
qemu-img info's "disk size" output -- and that is effectively useless,
because qemu-img prints a human-readable value (which generally includes
a decimal point). That will be fixed in the next patch.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190925183231.11196-3-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
If we use growth_mode = metadata, it is very much possible that the file
uses more disk space after we have written something to the added area.
We did indeed want to test for this case, but unfortunately we evidently
just copied the code from the "Test creation preallocation" section and
forgot to replace "$create_mode" by "$growth_mode".
We never noticed because we only read the first number from qemu-img
info's "disk size" output -- and that is effectively useless, because
qemu-img prints a human-readable value (which generally includes a
decimal point). That will be fixed in the patch after the next one.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190925183231.11196-2-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
A block driver can provide a callback to report driver-specific
statistics.
file-posix driver now reports discard statistics
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20190923121737.83281-10-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will help to identify how many of the user-issued discard operations
(accounted on a device level) have actually suceeded down on the host file
(even though the numbers will not be exactly the same if non-raw format
driver is used (e.g. qcow2 sending metadata discards)).
Note that these numbers will not include discards triggered by
write-zeroes + MAY_UNMAP calls.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-9-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-8-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This will help to account the operation in the following commit.
The difference is that we don't call scsi_disk_req_check_error() before
the 1st discard iteration anymore. That function also checks if
the request is cancelled, however it shouldn't get canceled until it
yields in blk_aio() functions anyway.
Same approach is already used for emulate_write_same.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20190923121737.83281-7-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
it allows to report it in the error handler
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Message-id: 20190923121737.83281-6-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-5-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Each block_acct_done/failed call is designed to correspond to a
previous block_acct_start call, which initializes the stats cookie.
However sometimes it is not the case, e.g. some error paths might
report the same cookie twice because it is hard to accurately track if
the cookie was reported yet or not.
This patch cleans the cookie after report.
(Note: block_acct_failed/done without a previous block_acct_start at
all should be avoided. Uninitialized cookie might hold a garbage value
and there is still "< BLOCK_MAX_IOTYPE" assertion for that)
It will be particularly useful in ide code where it's hard to
keep track whether the request done its accounting or not: in the
following patch of the series, trim requests will do the accounting
separately.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-4-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20190923121737.83281-3-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Make the stat fields definition slightly more readable.
Also reorder total_time_ns stats read-write-flush as done elsewhere.
Cosmetic change only.
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190923121737.83281-2-anton.nefedov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
SCSI devices are unused in test, drop them.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-12-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
After previous commit Drive.device is actually unused. Drop it together
with .name property. While being here reuse .node in qmp commands
instead of writing 'drive0' twice.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-11-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
After backup-top filter appearing it's not possible to see dirty
bitmaps in top node, so use node-name instead.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-10-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Teach bdrv_debug_breakpoint and bdrv_debug_remove_breakpoint skip
filters with backing. This is needed to implement and use in backup job
it's own backup_top filter driver (like mirror already has one), and
without this improvement, breakpoint removal will fail at least in 55
iotest.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-9-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split block_copy to separate file, to be cleanly shared with backup-top
filter driver in further commits.
It's a clean movement, the only change is drop "static" from interface
functions.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-8-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We need to fix comment style around block-copy functions before further
moving them to separate file to satisfy checkpatch. But do more: fix
all comments style. Also, seems like doubled first asterisk is not
forbidden, but drop it too for consistency.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-7-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split copying code part from backup to "block-copy", including separate
state structure and function renaming. This is needed to share it with
backup-top filter driver in further commits.
Notes:
1. As BlockCopyState keeps own BlockBackend objects, remaining
job->common.blk users only use it to get bs by blk_bs() call, so clear
job->commen.blk permissions set in block_job_create and add
job->source_bs to be used instead of blk_bs(job->common.blk), to keep
it more clear which bs we use when introduce backup-top filter in
further commit.
2. Rename s/initializing_bitmap/skip_unallocated/ to sound a bit better
as interface to BlockCopyState
3. Split is not very clean: there left some duplicated fields, backup
code uses some BlockCopyState fields directly, let's postpone it for
further improvements and keep this comment simpler for review.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190920142056.12778-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Split copying logic which will be shared with backup-top filter.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190920142056.12778-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
We shouldn't try to copy bytes beyond EOF. Fix it.
Fixes: 9ded4a0114
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-id: 20190920142056.12778-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Of course, QEMU_ALIGN_UP is a typo, it should be QEMU_ALIGN_DOWN, as we
are trying to find aligned size which satisfy both source and target.
Also, don't ignore too small max_transfer. In this case seems safer to
disable copy_range.
Fixes: 9ded4a0114
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190920142056.12778-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
It improves performance for fragmented qcow2 images.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190916175324.18478-6-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Similarly to previous commit, prepare for parallelizing write-loop
iterations.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190916175324.18478-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Further patch will run partial requests of iterations of
qcow2_co_preadv in parallel for performance reasons. To prepare for
this, separate part which may be parallelized into separate function
(qcow2_co_preadv_task).
While being here, also separate encrypted clusters reading to own
function, like it is done for compressed reading.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190916175324.18478-4-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Common interface for aio task loops. To be used for improving
performance of synchronous io loops in qcow2, block-stream,
copy-on-read, and may be other places.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20190916175324.18478-3-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Upcoming asynchronous handling of sub-parts of qcow2 requests will
change number of leaked clusters and even make it racy. As a
preparation, ignore leaks on failure parts in 026.
It's not trivial to just grep or substitute qemu-img output for such
thing. Instead do better: 3 is a error code of qemu-img check, if only
leaks are found. Catch this case and print success output.
Suggested-by: Anton Nefedov <anton.nefedov@virtuozzo.com>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190916175324.18478-2-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
This pull request also contains the two commits from the previous pull request
that was dropped due to a mingw compilation error. The compilation should now
be fixed.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAl2coyIACgkQnKSrs4Gr
c8iE1AgAh1ACKXmuH+ml3jkKniLVpr4KEIWB5CmlMSQtmv2Hteyi+cI+T/WvhFGB
Xw8yW1yxVeV98lPWZJeb06s/Ry/ZXef+D63i6xcQzc/3a6pTJKeLdi8acbJuSRso
A3VjQaczjrP9GOPvOoy3XkXoLr5nuD4NI8TYMmhWgwb6eSETUHGYgQo1uoZkqkuF
4/K856dtN2wb3WqChdwBhg+1o8WRpxEZ74pVC0SBGtKcBDjiY7J/BEXfNJo5M4gJ
s1x3FVpSN19LYljgo4WCJt/hzMkOSy0uV4mSzCx6U/dEB+w+VUvuZ7wTt69Kweji
vTMsFDN67Xzq8xWqeiG5uGBM8NRIwQ==
=zUDj
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Pull request
This pull request also contains the two commits from the previous pull request
that was dropped due to a mingw compilation error. The compilation should now
be fixed.
# gpg: Signature made Tue 08 Oct 2019 15:54:26 BST
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/block-pull-request:
iotests/262: Switch source/dest VM launch order
block: Skip COR for inactive nodes
virtio-blk: schedule virtio_notify_config to run on main context
util/ioc.c: try to reassure Coverity about qemu_iovec_init_extended
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Launching the destination VM before the source VM gives us a regression
test for HEAD^:
The guest device causes a read from the disk image through
guess_disk_lchs(). This will not work if the first sector (containing
the partition table) is yet unallocated, we use COR, and the node is
inactive.
By launching the source VM before the destination, however, the COR
filter on the source will allocate that area in the image shared between
both VMs, thus the problem will not become apparent.
Switching the launch order causes the sector to still be unallocated
when guess_disk_lchs() runs on the inactive node in the destination VM,
and thus we get our test case.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191001174827.11081-3-mreitz@redhat.com
Message-Id: <20191001174827.11081-3-mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We must not write data to inactive nodes, and a COR is certainly
something we can simply not do without upsetting anyone. So skip COR
operations on inactive nodes.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 20191001174827.11081-2-mreitz@redhat.com
Message-Id: <20191001174827.11081-2-mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
virtio_notify_config() needs to acquire the global mutex, which isn't
allowed from an iothread, and may lead to a deadlock like this:
- main thead
* Has acquired: qemu_global_mutex.
* Is trying the acquire: iothread AioContext lock via
AIO_WAIT_WHILE (after aio_poll).
- iothread
* Has acquired: AioContext lock.
* Is trying to acquire: qemu_global_mutex (via
virtio_notify_config->prepare_mmio_access).
If virtio_blk_resize() is called from an iothread, schedule
virtio_notify_config() to be run in the main context BH.
[Removed unnecessary newline as suggested by Kevin Wolf
<kwolf@redhat.com>.
--Stefan]
Signed-off-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 20190916112411.21636-1-slp@redhat.com
Message-Id: <20190916112411.21636-1-slp@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Make it more obvious, that filling qiov corresponds to qiov allocation,
which in turn corresponds to total_niov calculation, based on mid_niov
(not mid_len). Still add an assertion to show that there should be no
difference.
[Added mingw "error: 'mid_iov' may be used uninitialized in this
function" compiler error fix suggested by Vladimir.
--Stefan]
Reported-by: Coverity (CID 1405302)
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20190910090310.14032-1-vsementsov@virtuozzo.com
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190910090310.14032-1-vsementsov@virtuozzo.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
fixup! util/ioc.c: try to reassure Coverity about qemu_iovec_init_extended
drop Python2 dependency in EDK2 build scripts.
-----BEGIN PGP SIGNATURE-----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=BE2l
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/philmd-gitlab/tags/edk2-next-20191007' into staging
Improve scripts relying on the EDK2 submodule,
drop Python2 dependency in EDK2 build scripts.
# gpg: Signature made Mon 07 Oct 2019 14:31:38 BST
# gpg: using RSA key 89C1E78F601EE86C867495CBA2A3FD6EDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (Phil) <philmd@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 89C1 E78F 601E E86C 8674 95CB A2A3 FD6E DEAD C0DE
* remotes/philmd-gitlab/tags/edk2-next-20191007:
edk2 build scripts: work around TianoCore#1607 without forcing Python 2
edk2 build scripts: honor external BaseTools flags with uefi-test-tools
roms: Add a 'make help' target alias
roms/Makefile.edk2: don't pull in submodules when building from tarball
make-release: pull in edk2 submodules so we can build it from tarballs
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It turns out that forcing python2 for running the edk2 "build" utility is
neither necessary nor sufficient.
Forcing python2 is not sufficient for two reasons:
- QEMU is moving away from python2, with python2 nearing EOL,
- according to my most recent testing, the lacking dependency information
in the makefiles that are generated by edk2's "build" utility can cause
parallel build failures even when "build" is executed by python2.
And forcing python2 is not necessary because we can still return to the
original idea of filtering out jobserver-related options from MAKEFLAGS.
So do that.
While at it, cut short edk2's auto-detection of the python3.* minor
version, by setting PYTHON_COMMAND to "python3" (which we expect to be
available wherever we intend to build edk2).
With this patch, the guest UEFI binaries that are used as part of the BIOS
tables test, and the OVMF and ArmVirtQemu platform firmwares, will be
built strictly in a single job, regardless of an outermost "-jN" make
option. Alas, there appears to be no reliable way to build edk2 in an
(outer make, inner make) environment, with a jobserver enabled.
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: John Snow <jsnow@redhat.com>
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reported-by: John Snow <jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-3-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Unify the recipe for "build-edk2-tools" in
"tests/uefi-test-tools/Makefile" with the recipe for "edk2-basetools" in
"roms/Makefile".
Cc: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920083808.21399-2-lersek@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Various C projects provide a 'make help' target. Our root directory
does so. The roms/ directory lacks a such rule, but already displays
a help output when the default target is called.
Add a 'help' target aliased to the default one, to avoid:
$ make -C roms help
make: *** No rule to make target 'help'. Stop.
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-Id: <20190920171159.18633-1-philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Currently the `make efi` target pulls submodules nested under the
roms/edk2 submodule as dependencies. However, when we attempt to build
from a tarball this fails since we are no longer in a git tree.
A preceding patch will pre-populate these submodules in the tarball,
so assume this build dependency is only needed when building from a
git tree.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Cc: qemu-stable@nongnu.org # v4.1.0
Reported-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20190912231202.12327-3-mdroth@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The `make efi` target added by 536d2173 is built from the roms/edk2
submodule, which in turn relies on additional submodules nested under
roms/edk2.
The make-release script currently only pulls in top-level submodules,
so these nested submodules are missing in the resulting tarball.
We could try to address this situation more generally by recursively
pulling in all submodules, but this doesn't necessarily ensure the
end-result will build properly (this case also required other changes).
Additionally, due to the nature of submodules, we may not always have
control over how these sorts of things are dealt with, so for now we
continue to handle it on a case-by-case in the make-release script.
Cc: Laszlo Ersek <lersek@redhat.com>
Cc: Bruce Rogers <brogers@suse.com>
Cc: qemu-stable@nongnu.org # v4.1.0
Reported-by: Bruce Rogers <brogers@suse.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20190912231202.12327-2-mdroth@linux.vnet.ibm.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Here's the next batch of ppc and spapr patches. Includes:
* Fist part of a large cleanup to irq infrastructure
* Recreate the full FDT at CAS time, instead of making a difficult
to follow set of updates. This will help us move towards
eliminating CAS reboots altogether
* No longer provide RTAS blob to SLOF - SLOF can include it just as
well itself, since guests will generally need to relocate it with
a call to instantiate-rtas
* A number of DFP fixes and cleanups from Mark Cave-Ayland
* Assorted bugfixes
* Several new small devices for powernv
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdfRlhq5hpmzETofcbDjKyiDZs5IFAl2XEn0ACgkQbDjKyiDZ
s5I6bA/7B5sjY/QxuE8axm5KupoAnE8zf205hN8mbYASwtDfFwgaeNreVaOSJUpr
fgcx/g9G3rAryGZv3O6i02+wcRgNw1DnJ3ynCthIrExZEcfbTYJiS4s9apwPEQy8
HFmBNdPDqrhFI0aFvXEUauiOp1aapPUUklm34eFscs94lJXxphRUEfa3XT5uEhUh
xrIZwYq20A+ih4UHwk3Onyx/cvFpl6BRB2nVEllQFqzwF5eTTfz9t8+JGTebxD/7
8qqt8ti0KM3wxSDTQnmyMUmpgy+C1iCvNYvv6nWFg+07QuGs48EHlQUUVVni4r9j
kUrDwKS2eC+8e8gP/xdIXEq3R2DsAMq+wFIswXZ3X6x4DoUV0OAJSHc9iMD4l+pr
LyWnVpDprc6XhJHWKpuHZ5w9EuBnZFbIXdlZGFno+8UvXtusnbbuwAZzHTrRJRqe
/AWVpFwGAoOF4KxIOFlPVBI8m4vFad/soVojC0vzIbRqaogOFZAjiL/yD5GwLmMa
tywOEMBUJ/j2lgudTCyKn5uCa/Ew3DS1TSdenJjyqRi/gZM0IaORIhJhyFYW/eO1
U7Uh8BnbC+4J11wwvFR5+W789dgM2+EEtAX9uI08VcE/R2ASabZlN4Zwrl0w4cb/
VRybMT4bgmjzHRpfrqYPxpn8wqPcIw0BCeipSOjY3QU1Q25TEYQ=
=PXXe
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-4.2-20191004' into staging
ppc patch queue 2019-10-04
Here's the next batch of ppc and spapr patches. Includes:
* Fist part of a large cleanup to irq infrastructure
* Recreate the full FDT at CAS time, instead of making a difficult
to follow set of updates. This will help us move towards
eliminating CAS reboots altogether
* No longer provide RTAS blob to SLOF - SLOF can include it just as
well itself, since guests will generally need to relocate it with
a call to instantiate-rtas
* A number of DFP fixes and cleanups from Mark Cave-Ayland
* Assorted bugfixes
* Several new small devices for powernv
# gpg: Signature made Fri 04 Oct 2019 10:35:57 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-4.2-20191004: (53 commits)
ppc/pnv: Remove the XICSFabric Interface from the POWER9 machine
spapr: Eliminate SpaprIrq::init hook
spapr: Add return value to spapr_irq_check()
spapr: Use less cryptic representation of which irq backends are supported
xive: Improve irq claim/free path
spapr, xics, xive: Better use of assert()s on irq claim/free paths
spapr: Handle freeing of multiple irqs in frontend only
spapr: Remove unhelpful tracepoints from spapr_irq_free_xics()
spapr: Eliminate SpaprIrq:get_nodename method
spapr: Simplify spapr_qirq() handling
spapr: Fix indexing of XICS irqs
spapr: Eliminate nr_irqs parameter to SpaprIrq::init
spapr: Clarify and fix handling of nr_irqs
spapr: Replace spapr_vio_qirq() helper with spapr_vio_irq_pulse() helper
spapr: Fold spapr_phb_lsi_qirq() into its single caller
xics: Create sPAPR specific ICS subtype
xics: Merge TYPE_ICS_BASE and TYPE_ICS_SIMPLE classes
xics: Eliminate reset hook
xics: Rename misleading ics_simple_*() functions
xics: Eliminate 'reject', 'resend' and 'eoi' class hooks
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
When I run QEMU with KVM under Valgrind, I currently get this warning:
Syscall param ioctl(generic) points to uninitialised byte(s)
at 0x95BA45B: ioctl (in /usr/lib64/libc-2.28.so)
by 0x429DC3: kvm_ioctl (kvm-all.c:2365)
by 0x51B249: kvm_arch_get_supported_msr_feature (kvm.c:469)
by 0x4C2A49: x86_cpu_get_supported_feature_word (cpu.c:3765)
by 0x4C4116: x86_cpu_expand_features (cpu.c:5065)
by 0x4C7F8D: x86_cpu_realizefn (cpu.c:5242)
by 0x5961F3: device_set_realized (qdev.c:835)
by 0x7038F6: property_set_bool (object.c:2080)
by 0x707EFE: object_property_set_qobject (qom-qobject.c:26)
by 0x705814: object_property_set_bool (object.c:1338)
by 0x498435: pc_new_cpu (pc.c:1549)
by 0x49C67D: pc_cpus_init (pc.c:1681)
Address 0x1ffeffee74 is on thread 1's stack
in frame #2, created by kvm_arch_get_supported_msr_feature (kvm.c:445)
It's harmless, but a little bit annoying, so silence it by properly
initializing the whole structure with zeroes.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some secondary controls are automatically enabled/disabled based on the CPUID
values that are set for the guest. However, they are still available at a
global level and therefore should be present when KVM_GET_MSRS is sent to
/dev/kvm.
Unfortunately KVM forgot to include those, so fix that.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>