When doing reverse blit we need to check if source and dest overlap
but it is not trivial due to possible different base and pitch of
source and dest. Do rectangle overlap if base and pitch match,
otherwise just check if memory area containing the rects overlaps so
rects could possibly overlap.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <20200624164737.A941374633D@zero.eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Instead of open coding op with different sizes using a switch and type
casting it can be written more compactly using stn_he_p/ldn_he_p.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: e2f649cb286f0735a10ec87c1b36a7ae081acb61.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some guests do 1x1 blits which is faster to do directly than calling a
function for it so avoid overhead in this case.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 7cccc302d7b4c5c313bad7681ac4686417143c3e.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The bytes per pixel value can be calculated from format but it's used
freqently enough (and will be used more in subseqent patches) so store
it in a variable for better readabilty. Also drop some unneded 0x
prefix around where new variable is defined.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: b9ea5ef2d68583db9f3fb73a2b859abbd7c044a8.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some guests seem to try source copy blits with same source and dest
which are no-op so avoid calling pixman for these.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: a2a8214dd37344dfb65f1c343ace4cff2e94f3bb.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We don't need a separate variable to keep track if we allocated memory
that needs to be freed as we can test the pointer itself.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ff9136c3151a15cdfa1d9b7a68acf11cffb8efa4.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We don't need to add width to pitch when calculating last point, that
would reject valid ops within the card's local_mem.
Fixes: b15a22bbcb
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: ddb5781d12913bb9d6dbfd9e5b1e2b893e2b3e2d.1592686588.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These are init/realize pairs produced by the previous commit's
Coccinelle script where the argument test doesn't quite match. They
need even more careful review.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-50-armbru@redhat.com>
aux_create_slave() has become a trivial wrapper around qdev_new().
There's just one user. Eliminate.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-35-armbru@redhat.com>
aux_bus_init() encapsulates the creation of an aux-bus and its
aux-to-i2c-bridge device.
Create aux_bus_realize() to similarly encapsulate their realization.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-33-armbru@redhat.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-32-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In addition to the qdev_create() patterns converted so far, we have a
qdev_set_parent_bus() pattern. Mostly when we embed a device in a
parent device rather than allocating it on the heap.
This pattern also puts devices in the dangerous "no QOM parent, but
plugged into bus" state I explained in recent commit "qdev: New
qdev_new(), qdev_realize(), etc."
Apply same solution: convert to qdev_realize(). Coccinelle script:
@@
expression dev, bus, errp;
symbol true;
@@
- qdev_set_parent_bus(DEVICE(dev), bus);
...
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(DEVICE(dev), bus, errp);
@ depends on !(file in "qdev-monitor.c") && !(file in "hw/core/qdev.c")@
expression dev, bus, errp;
symbol true;
@@
- qdev_set_parent_bus(dev, bus);
...
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize(dev, bus, errp);
@@
expression dev, bus;
symbol true;
@@
- qdev_set_parent_bus(DEVICE(dev), bus);
...
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize(DEVICE(dev), bus, &error_fatal);
Unconverted uses of qdev_set_parent_bus() remain. They'll be
converted later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-12-armbru@redhat.com>
[Also convert new hw/virtio/vhost-user-vsock-pci.c]
Same transformation as in the previous commit. Manual, because
convincing Coccinelle to transform these cases is somewhere between
not worthwhile and infeasible (at least for me).
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-11-armbru@redhat.com>
This is the transformation explained in the commit before previous.
Takes care of just one pattern that needs conversion. More to come in
this series.
Coccinelle script:
@ depends on !(file in "hw/arm/highbank.c")@
expression bus, type_name, dev, expr;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr;
identifier DOWN;
@@
- dev = DOWN(qdev_create(bus, type_name));
+ dev = DOWN(qdev_new(type_name));
... when != dev = expr
- qdev_init_nofail(DEVICE(dev));
+ qdev_realize_and_unref(DEVICE(dev), bus, &error_fatal);
@@
expression bus, type_name, expr;
identifier dev;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- qdev_init_nofail(dev);
+ qdev_realize_and_unref(dev, bus, &error_fatal);
@@
expression bus, type_name, dev, expr, errp;
symbol true;
@@
- dev = qdev_create(bus, type_name);
+ dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
@@
expression bus, type_name, expr, errp;
identifier dev;
symbol true;
@@
- DeviceState *dev = qdev_create(bus, type_name);
+ DeviceState *dev = qdev_new(type_name);
... when != dev = expr
- object_property_set_bool(OBJECT(dev), true, "realized", errp);
+ qdev_realize_and_unref(dev, bus, errp);
The first rule exempts hw/arm/highbank.c, because it matches along two
control flow paths there, with different @type_name. Covered by the
next commit's manual conversions.
Missing #include "qapi/error.h" added manually.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200610053247.1583243-10-armbru@redhat.com>
[Conflicts in hw/misc/empty_slot.c and hw/sparc/leon3.c resolved]
sm501_init() and ati_vga_realize() create an "i2c-ddc" device, but
neglect to realize it. Affects machines sam460ex, shix, r2d, and
fulong2e.
In theory, a device becomes real only on realize. In practice, the
transition from unreal to real is a fuzzy one. The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize). Depending on
what exactly is done where, a device can work even when we neglect
to realize it.
This one appears to work. Nevertheless, it's a clear misuse of the
interface. Even when it works today (more or less by chance), it can
break tomorrow.
Fix by realizing it right away. Visible in "info qom-tree"; here's
the change for sam460ex:
/machine (sam460ex-machine)
[...]
/unattached (container)
[...]
- /device[14] (sii3112)
+ /device[14] (i2c-ddc)
+ /device[15] (sii3112)
[rest of device[*] renumbered...]
Fixes: 4a1f253adb
Fixes: c82c7336de
Cc: BALATON Zoltan <balaton@eik.bme.hu>
Cc: qemu-ppc@nongnu.org
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Philippe Mathieu-Daudé <f4bug@amsat.org>
Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200609122339.937862-19-armbru@redhat.com>
xlnx_dp_init() creates these two devices, but they're never realized.
Affects machine xlnx-zcu102.
In theory, a device becomes real only on realize. In practice, the
transition from unreal to real is a fuzzy one. The work to make a
device real can be spread between realize methods (fine),
instance_init methods (wrong), and board code wiring up the device
(fine as long as it effectively happens on realize). Depending on
what exactly is done where, a device can work even when we neglect to
realize it.
These two appear to work. Nevertheless, it's a clear misuse of the
interface. Even when it works today (more or less by chance), it can
break tomorrow.
Fix by realizing them in xlnx_dp_realize().
Fixes: 58ac482a66
Cc: KONRAD Frederic <fred.konrad@greensocs.com>
Cc: Alistair Francis <alistair@alistair23.me>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-arm@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20200609122339.937862-3-armbru@redhat.com>
While replacing fprintf() by qemu_log_mask() in commit
2b55f4d350, we incorrectly used a 'tab = 4 spaces'
alignment, leading to misindented new code. Fix now.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200529165436.23573-1-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While accessing VGA registers via ati_mm_read/write routines,
a guest may set 's->regs.mm_index' such that it leads to infinite
recursion. Check mm_index value to avoid such recursion. Log an
error message for wrong values.
Reported-by: Ren Ding <rding@gatech.edu>
Reported-by: Hanqing Zhao <hanqing@gatech.edu>
Reported-by: Yi Ren <c4tren@gmail.com>
Message-id: 20200604090830.33885-1-ppandit@redhat.com
Suggested-by: BALATON Zoltan <balaton@eik.bme.hu>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
AmigaOS tends to do a lot of small blits (even 1 pixel). Avoid malloc
overhead by keeping around a buffer for this and only alloc when
blitting larger areas.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 7946852258d528497e85f465327fc90b5c3b59fb.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Besides being faster this should also prevent malicious guests to
abuse 2D engine to overwrite data or cause a crash.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 58666389b6cae256e4e972a32c05cf8aa51bffc0.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make variables local to the block they are used in to make it clearer
which operation they are needed for.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: ae59f8138afe7f6a5a4a82539d0f61496a906b06.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some places already use qemu_log_mask() to log unimplemented features
or errors but some others have printf() then abort(). Convert these to
qemu_log_mask() and avoid aborting to prevent guests to easily cause
denial of service.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 305af87f59d81e92f2aaff09eb8a3603b8baa322.1590089984.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace printf() calls by qemu_log_mask(UNIMP), which is
disabled by default. This avoid flooding the terminal when
fuzzing the device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-15-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace fprintf() call by qemu_log_mask(LOG_UNIMP), which is
disabled by default. This avoid flooding the terminal when
fuzzing the device.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-14-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
To avoid the orphan I/O memory region being added in the /unattached
QOM container, register the PCI device as its owner.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20200526062252.19852-12-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Avoid flooding stdio by converting printf() calls to
qemu_log_mask(GUEST_ERROR), which are disabled by default.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-11-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
DPRINTF() calls are disabled by default, so when unexpected
data is used, the whole process abort without information.
Display a bit of information with error_report() before crashing.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-10-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The memory region size is 512K.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-8-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Convert the final bit of DEBUG_BITBLT to a tracepoint.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-7-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Replace some debug printf() calls by qemu_log_mask(LOG_UNIMP),
and add a new one in cirrus_linear_bitblt_read().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200526062252.19852-5-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
hw_error() calls exit(). This a bit overkill when we can log
the accesses as unimplemented or guest error.
When fuzzing the devices, we don't want the whole process to
exit. Replace some hw_error() calls by qemu_log_mask().
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20200518140309.5220-3-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
size calculation isn't correct with guest-supplied stride, the last
display line isn't accounted for correctly.
For the typical case of stride > linesize (add padding) we error on the
safe side (calculated size is larger than actual size).
With stride < linesize (scanlines overlap) the calculated size is
smaller than the actual size though so our guest memory mapping might
end up being too small.
While being at it also fix ramfb_create_display_surface to use hwaddr
for the parameters. That way all calculation are done with hwaddr type
and we can't get funny effects from type castings.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-7-kraxel@redhat.com
Store width & height & surface in local variables. Update RAMFBState
with the new values only in case the ramfb_create_display_surface() call
succeeds.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-5-kraxel@redhat.com
This reverts commit a9e0cb67b7.
This breaks OVMF. Reproducer: Just hit 'ESC' at early boot to enter
firmware setup. OVMF wants switch from (default) 800x600 to 640x480 for
that, and this patch blocks it.
Cc: Hou Qiming <hqm03ster@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-3-kraxel@redhat.com
This reverts commit f79081b4b7.
Patch has broken byteorder handling: RAMFBCfg fields are in bigendian
byteorder, the reset function doesn't care so native byteorder is used
instead. Given this went unnoticed so far the feature is obviously
unused, so just revert the patch.
Cc: Hou Qiming <hqm03ster@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 20200429115236.28709-2-kraxel@redhat.com
The "framebuffer.h" header is not an exported include.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20200504082003.16298-2-f4bug@amsat.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
According to docs bits 1 and 0 of MM_INDEX are hard coded to 0 so
unaligned access via this register should not be possible.
This also fixes problems reported in bug #1878134.
Buglink: https://bugs.launchpad.net/qemu/+bug/1878134
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: Alexander Bulekov <alxndr@bu.edu>
Acked-by: Alexander Bulekov <alxndr@bu.edu>
Message-id: 20200516132352.39E9374594E@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The DEVICE() macro is defined as:
#define DEVICE(obj) OBJECT_CHECK(DeviceState, (obj), TYPE_DEVICE)
which expands to:
((DeviceState *)object_dynamic_cast_assert((Object *)(obj), (name),
__FILE__, __LINE__,
__func__))
This assertion can only fail when @obj points to something other
than its stated type, i.e. when we're in undefined behavior country.
Remove the unnecessary DEVICE() casts when we already know the
pointer is of DeviceState type.
Patch created mechanically using spatch with this script:
@@
typedef DeviceState;
DeviceState *s;
@@
- DEVICE(s)
+ s
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Paul Durrant <paul@xen.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Acked-by: John Snow <jsnow@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200512070020.22782-4-f4bug@amsat.org>
Devices may have component devices and buses.
Device realization may fail. Realization is recursive: a device's
realize() method realizes its components, and device_set_realized()
realizes its buses (which should in turn realize the devices on that
bus, except bus_set_realized() doesn't implement that, yet).
When realization of a component or bus fails, we need to roll back:
unrealize everything we realized so far. If any of these unrealizes
failed, the device would be left in an inconsistent state. Must not
happen.
device_set_realized() lets it happen: it ignores errors in the roll
back code starting at label child_realize_fail.
Since realization is recursive, unrealization must be recursive, too.
But how could a partly failed unrealize be rolled back? We'd have to
re-realize, which can fail. This design is fundamentally broken.
device_set_realized() does not roll back at all. Instead, it keeps
unrealizing, ignoring further errors.
It can screw up even for a device with no buses: if the lone
dc->unrealize() fails, it still unregisters vmstate, and calls
listeners' unrealize() callback.
bus_set_realized() does not roll back either. Instead, it stops
unrealizing.
Fortunately, no unrealize method can fail, as we'll see below.
To fix the design error, drop parameter @errp from all the unrealize
methods.
Any unrealize method that uses @errp now needs an update. This leads
us to unrealize() methods that can fail. Merely passing it to another
unrealize method cannot cause failure, though. Here are the ones that
do other things with @errp:
* virtio_serial_device_unrealize()
Fails when qbus_set_hotplug_handler() fails, but still does all the
other work. On failure, the device would stay realized with its
resources completely gone. Oops. Can't happen, because
qbus_set_hotplug_handler() can't actually fail here. Pass
&error_abort to qbus_set_hotplug_handler() instead.
* hw/ppc/spapr_drc.c's unrealize()
Fails when object_property_del() fails, but all the other work is
already done. On failure, the device would stay realized with its
vmstate registration gone. Oops. Can't happen, because
object_property_del() can't actually fail here. Pass &error_abort
to object_property_del() instead.
* spapr_phb_unrealize()
Fails and bails out when remove_drcs() fails, but other work is
already done. On failure, the device would stay realized with some
of its resources gone. Oops. remove_drcs() fails only when
chassis_from_bus()'s object_property_get_uint() fails, and it can't
here. Pass &error_abort to remove_drcs() instead.
Therefore, no unrealize method can fail before this patch.
device_set_realized()'s recursive unrealization via bus uses
object_property_set_bool(). Can't drop @errp there, so pass
&error_abort.
We similarly unrealize with object_property_set_bool() elsewhere,
always ignoring errors. Pass &error_abort instead.
Several unrealize methods no longer handle errors from other unrealize
methods: virtio_9p_device_unrealize(),
virtio_input_device_unrealize(), scsi_qdev_unrealize(), ...
Much of the deleted error handling looks wrong anyway.
One unrealize methods no longer ignore such errors:
usb_ehci_pci_exit().
Several realize methods no longer ignore errors when rolling back:
v9fs_device_realize_common(), pci_qdev_unrealize(),
spapr_phb_realize(), usb_qdev_realize(), vfio_ccw_realize(),
virtio_device_realize().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-17-armbru@redhat.com>
The only way object_property_add() can fail is when a property with
the same name already exists. Since our property names are all
hardcoded, failure is a programming error, and the appropriate way to
handle it is passing &error_abort.
Same for its variants, except for object_property_add_child(), which
additionally fails when the child already has a parent. Parentage is
also under program control, so this is a programming error, too.
We have a bit over 500 callers. Almost half of them pass
&error_abort, slightly fewer ignore errors, one test case handles
errors, and the remaining few callers pass them to their own callers.
The previous few commits demonstrated once again that ignoring
programming errors is a bad idea.
Of the few ones that pass on errors, several violate the Error API.
The Error ** argument must be NULL, &error_abort, &error_fatal, or a
pointer to a variable containing NULL. Passing an argument of the
latter kind twice without clearing it in between is wrong: if the
first call sets an error, it no longer points to NULL for the second
call. ich9_pm_add_properties(), sparc32_ledma_realize(),
sparc32_dma_realize(), xilinx_axidma_realize(), xilinx_enet_realize()
are wrong that way.
When the one appropriate choice of argument is &error_abort, letting
users pick the argument is a bad idea.
Drop parameter @errp and assert the preconditions instead.
There's one exception to "duplicate property name is a programming
error": the way object_property_add() implements the magic (and
undocumented) "automatic arrayification". Don't drop @errp there.
Instead, rename object_property_add() to object_property_try_add(),
and add the obvious wrapper object_property_add().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20200505152926.18877-15-armbru@redhat.com>
[Two semantic rebase conflicts resolved]
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
-----BEGIN PGP SIGNATURE-----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=ibgH
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/trivial-branch-for-5.1-pull-request' into staging
trivial patches (20200504)
Silent static analyzer warning
Remove dead assignments
Support -chardev serial on macOS
Update MAINTAINERS
Some cosmetic changes
# gpg: Signature made Mon 04 May 2020 16:45:18 BST
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/trivial-branch-for-5.1-pull-request:
hw/timer/pxa2xx_timer: Add assertion to silent static analyzer warning
hw/timer/stm32f2xx_timer: Remove dead assignment
hw/gpio/aspeed_gpio: Remove dead assignment
hw/isa/i82378: Remove dead assignment
hw/ide/sii3112: Remove dead assignment
hw/input/adb-kbd: Remove dead assignment
hw/i2c/pm_smbus: Remove dead assignment
blockdev: Remove dead assignment
block: Avoid dead assignment
Compress lines for immediate return
chardev: Add macOS to list of OSes that support -chardev serial
MAINTAINERS: Update Keith Busch's email address
elf_ops: Don't try to g_mapped_file_unref(NULL)
hw/mem/pc-dimm: Fix line over 80 characters warning
hw/mem/pc-dimm: Print slot number on error at pc_dimm_pre_plug()
MAINTAINERS: Mark the LatticeMico32 target as orphan
timer/exynos4210_mct: Remove redundant statement in exynos4210_mct_write()
display/blizzard: use extract16() for fix clang analyzer warning in blizzard_draw_line16_32()
scsi/esp-pci: add g_assert() for fix clang analyzer warning in esp_pci_io_write()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- ran regexp "qemu_mutex_lock\(.*\).*\n.*if" to find targets
- replaced result with QEMU_LOCK_GUARD if all unlocks at function end
- replaced result with WITH_QEMU_LOCK_GUARD if unlock not at end
Signed-off-by: Daniel Brodsky <dnbrdsky@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-id: 20200404042108.389635-3-dnbrdsky@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With virtio-vga, pci bar are reordered. Bar #2 is used for compatibility
with stdvga. By default, bar #2 is used by virtio modern io bar.
This bar is the last one introduce in the virtio pci bar layout and it's
crushed by the virtio-vga reordering. So virtio-vga and
modern-pio-notify are incompatible because virtio-vga failed to
initialize with this option.
This fix sets the modern io bar to the bar #5 to avoid conflict.
Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com>
Message-Id: <20200422215455.10244-1-anthoine.bourgeois@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Compress two lines into a single line if immediate return statement is found.
It also remove variables progress, val, data, ret and sock
as they are no longer needed.
Remove space between function "mixer_load" and '(' to fix the
checkpatch.pl error:-
ERROR: space prohibited between function name and open parenthesis '('
Done using following coccinelle script:
@@
local idexpression ret;
expression e;
@@
-ret =
+return
e;
-return ret;
Signed-off-by: Simran Singhal <singhalsimran0@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200401165314.GA3213@simran-Inspiron-5558>
[lv: in handle_aiocb_write_zeroes_unmap() move "int ret" inside the #ifdef]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In some corner cases (that never happen during normal operation but a
malicious guest could program wrong values) pixman functions were
called with parameters that result in a crash. Fix this and add more
checks to disallow such cases.
Reported-by: Ziming Zhang <ezrakiez@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20200406204029.19559747D5D@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The license is the 'GNU General Public License v2.0 or later',
not 'and':
This program is free software; you can redistribute it and/ori
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of
the License, or (at your option) any later version.
Fix the license comment.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200312213455.15854-1-philmd@redhat.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid orphan memory regions being added in the /unattached QOM
container.
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the Coccinelle script
scripts/coccinelle/memory-region-housekeeping.cocci.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
The bochs-display mmio bar has some sub-regions with the actual hardware
registers. What happens when the guest access something outside those
regions depends on the archirecture. On x86 those reads succeed (and
return 0xff I think). On risc-v qemu aborts.
This patch adds handlers for the parent region, to make the wanted
behavior explicit and to make things consistent across architectures.
v2:
- use existing unassigned_io_ops.
- also cover stdvga.
Cc: Alistair Francis <alistair23@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200309100009.17624-1-kraxel@redhat.com
Map qxl rom read-only into the guest, so the guest can't tamper with the
content. qxl has a shadow copy of the rom to deal with that, but the
shadow doesn't cover the mode list. A privilidged user in the guest can
manipulate the mode list and that to trick qemu into oob reads, leading
to a DoS via segfault if that read access happens to hit unmapped memory.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200225055920.17261-2-kraxel@redhat.com
To calculate screen size in centimeters we should calculate:
pixels/dpi*2.54
but not
pixels*dpi/2540
Using wrong formula we actually get 65 DPI and very small fonts.
Signed-off-by: Anton V. Boyarshinov <boyarsh@altlinux.org>
Message-id: 20200226122054.366b9cda@table.localdomain
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use an explicit boolean type.
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
This commit was produced with the included Coccinelle script
scripts/coccinelle/exec_rw_const.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20200214001303.12873-5-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
We want to have an early exit path. Delay some initializations
before the variables are used.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-4-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Instead of emitting the trace event before each call to
draw_line(), call it once at draw_line() entrance.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Acked-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20200214001303.12873-2-f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Fix warning reported by Clang static code analyzer:
hw/display/qxl.c:1634:14: warning: Value stored to 'orig_io_port' during its initialization is never read
uint32_t orig_io_port = io_port;
^~~~~~~~~~~~ ~~~~~~~
Reported-by: Clang Static Analyzer
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20200215161557.4077-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The only difference to hardware revision 4 is that the device doesn't
switch to VGA mode in case someone happens to touch a VGA register,
which should make things more robust in configurations with multiple
vga devices.
Swtiching back to VGA mode happens on reset, either full machine
reset or qxl device reset (QXL_IO_RESET ioport command).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-id: 20200206074358.4274-1-kraxel@redhat.com
We have many files that apparently do not depend on the target CPU
configuration, i.e. which can be put into common-obj-y instead of
obj-y. This way, the code can be shared for example between
qemu-system-arm and qemu-system-aarch64, or the various big and
little endian variants like qemu-system-sh4 and qemu-system-sh4eb,
so that we do not have to compile the code multiple times anymore.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20200130133841.10779-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The preferred way to test whether a trace event is enabled is to
use trace_event_get_state_backends(), because this will give the
correct answer (allowing expensive computations to be skipped)
whether the trace event is compile-time or run-time disabled.
Convert the old-style direct use of TRACE_FOO_ENABLED.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20200120151142.18954-4-peter.maydell@linaro.org
Message-Id: <20200120151142.18954-4-peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This adds emulation of Artist graphics good enough to get a text
console on both Linux and HP-UX. The X11 server from HP-UX also works.
Adjust boot-serial-test to disable graphics, so that SeaBIOS outputs
to the serial port, as expected by the test.
Signed-off-by: Sven Schnelle <svens@stackframe.org>
Message-Id: <20191220211512.3289-6-svens@stackframe.org>
[rth: Merge Helge's test for machine->enable_graphics]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When building with GCC9 using CFLAG -Wimplicit-fallthrough=2 we get:
hw/display/tcx.c: In function ‘tcx_dac_writel’:
hw/display/tcx.c:453:26: error: this statement may fall through [-Werror=implicit-fallthrough=]
453 | s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/display/tcx.c:454:9: note: here
454 | default:
| ^~~~~~~
hw/display/tcx.c: In function ‘tcx_dac_readl’:
hw/display/tcx.c:412:22: error: this statement may fall through [-Werror=implicit-fallthrough=]
412 | s->dac_index = (s->dac_index + 1) & 0xff; /* Index autoincrement */
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
hw/display/tcx.c:413:5: note: here
413 | default:
| ^~~~~~~
cc1: all warnings being treated as errors
Give a hint to GCC by adding the missing fall through comments.
Fixes: 55d7bfe22
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20191218192526.13845-3-philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Define the new macro VMSTATE_INSTANCE_ID_ANY for callers who wants to
auto-generate the vmstate instance ID. Previously it was hard coded
as -1 instead of this macro. It helps to change this default value in
the follow up patches. No functional change.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Embed the SerialMM sybus device, and re-export its "chardev" property.
That way, we can get rid of PROP_PTR "chr-state" and better track
devices relationship.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
The SM501 is a Mobile Multimedia Companion Chip with 2 UARTs.
This model only implements the first UART. Being part of the
chipset, the UART block is always mapped in memory, regardless
of whether we provide a chardev backend.
Since commit 12051d82f, qemu_chr_fe_init() accepts a NULL chardev.
Let's remove the chardev check and always map the UART in the
chipset memory.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191122133623.13004-1-philmd@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Hi,
The following patches have been extracted from the "[PATCH v6 00/25]
monitor: add asynchronous command type", as they are
reviewable/mergeable independantly.
They introduce some internal API changes, and fix
qemu_open()/qemu_close()/unlink() misusages which should be quite
harmless.
-----BEGIN PGP SIGNATURE-----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=aSgS
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/screendump-pull-request' into staging
console: screendump improvements
Hi,
The following patches have been extracted from the "[PATCH v6 00/25]
monitor: add asynchronous command type", as they are
reviewable/mergeable independantly.
They introduce some internal API changes, and fix
qemu_open()/qemu_close()/unlink() misusages which should be quite
harmless.
# gpg: Signature made Fri 03 Jan 2020 09:07:51 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/screendump-pull-request:
screendump: use qemu_unlink()
osdep: add qemu_unlink()
screendump: replace FILE with QIOChannel and fix close()/qemu_close()
object: add g_autoptr support
ui: add pixman image g_autoptr support
ppm-save: pass opened fd
console: add graphic_hw_update_done()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a function to be called when a graphic update is done.
Declare the QXL renderer as async: render_update_cookie_num counts the
number of outstanding updates, and graphic_hw_update_done() is called
when it reaches none.
(note: this is preliminary work for asynchronous screendump support)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
vga_init_vbe is now used only from ISA VGA cards. Since the alias is
not needed anymore, remove it (effectively reverting commit 8294a64d7f,
"vga: fix vram double-mapping with -vga std and -M pc-0.12", 2012-05-29)
and the now unused vbe_mapped field of VGACommonState. The function now
consists of a single memory_region_add_subregion call, so we can inline
it; this avoids incorrect usage from PCI cards.
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Based-on: <05af415a-5058-98b4-4a12-9d093a30b1e3@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Now that the old pc-0.x machine types have been removed, we do not need
the old "rombar" hacks anymore.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20191209125248.5849-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The script checkpatch.pl located in scripts folder was
used to detect all errors and warrnings in files:
hw/mips/mips_jazz.c
hw/display/jazz_led.c
hw/dma/rc4030.c
All these mips jazz machine files were edited and
all the errors and warrings generated by the checkpatch.pl
script were corrected and then the script was
ran again to make sure there are no more errors and warnings.
Signed-off-by: Filip Bozuta <Filip.Bozuta@rt-rk.com>
Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com>
Message-Id: <1575640687-20744-2-git-send-email-Filip.Bozuta@rt-rk.com>
Fill the audio channel with required number of bytes to cover the
elapsed time. This prevents rate control reset, and avoids debug prints
like below
log:
Resetting rate control (65692 samples)
...
Resetting rate control (65721 samples)
...
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 1573833408-2388-1-git-send-email-sai.pavan.boddu@xilinx.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds support for a graphic framebuffer device.
This device can be added as a sysbus device or as a NuBus device.
It is accessed as a framebuffer but the color palette can be set.
Co-developed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Thomas Huth <huth@tuxfamily.org>
Message-Id: <20191026164546.30020-9-laurent@vivier.eu>
This makes sure reads are confined to vga video memory.
v3: use uint32_t, fix cut+paste bug.
v2: fix ati_cursor_draw_line too.
Reported-by: xu hang <flier_m@outlook.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190917111441.27405-3-kraxel@redhat.com
The NeXTcube uses a linear framebuffer with 4 greyscale colors and
a fixed resolution of 1120 * 832.
This code has been taken from Bryce Lanham's GSoC 2011 NeXT branch at
https://github.com/blanham/qemu-NeXT/blob/next-cube/hw/next-fb.c
and altered to fit the latest interface of the current QEMU (e.g.
the device has been "qdev"-ified etc.).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190831074519.32613-2-huth@tuxfamily.org>
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
The MacOS driver exits if the card does not have an interrupt. If we
set PCI_INTERRUPT_PIN to 1 then it enables VBlank interrupts and it
boots but the mouse pointer cannot be moved. This patch implements a
dummy VBlank interrupt triggered by a 60 Hz timer. With this the
pointer now moves but MacOS still hangs somewhere before completely
finishing boot.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-Id: <89364275f2fb5f85ee73c0e76528aa91691a499a.1565907489.git.balaton@eik.bme.hu>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Various display devices are not target-specific and can
be compiled once for all the targets.
After this commit, the 'make world' target is reduced by
54 objects
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Message-Id: <20190812113739.16587-3-philmd@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The "cpu.h" include makes devices target-specific. Since it
is not used, remove it, so the device become generic (we can
now compile it once for all targets).
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20190812113739.16587-2-philmd@redhat.com>
[lv: fix conflict with 650d103d3e
("Include hw/hw.h exactly where needed")]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Set frame buffer endianness according to requested endianness for
frame buffer apertures. We set frame buffer to big endian if any of
the two apertures are set to big endian. Using different endianness
for the two apertures is not implemented. This fixes inverted colors
with MacOS and Xorg frame buffer driver but some Linux drivers may
have endianness issues even on real hardware so this may not fix all
cases. MorphOS uses aper0 in LE, Linux uses aper0 in BE and MacOS uses
aper1 in BE but not sure about others or if MacOS also may need aper0
in which case we'll need a more complex fix but MacOS has other
problems yet so for now this might work.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e2a7ec7af3fc30523213bcd27832ccad34323f2c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
MacOS uses non-0 offset so it needs this and the resulting
vbe_start_addr seems correct but picture is still broken with OpenBIOS
after FCode runs but that maybe due to firmware problems now. After
boot, picture is now correct.
It also occured to me that these CRTC regs are also present in VGA so
I wonder if they should be shared in case some drivers try to poke
them via VGA regs or these are a separate set of regs for extended
mode. Added a comment noting this but drivers I've tried so far
program the card accessing ati regs so I did not attempt to change it.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 1c6fce457ef7e6f889e38dc0423791be92310a62.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The crtc_offset is not needed, cur_offset is relative to the start of
vram not the start of displayed area. This fixes broken pointer image
with MacOS that uses non-0 crtc_offset.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e6acb1fa3ca980dc948045443e5986e2aa79bf7c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Also update bitbang_i2c state when output bits are changed while
enable bits are set. This fixes EDID access by the ATI FCode ROM.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 292e70a92b7fbfd9a4120d433dbdcfda4e5f6c3c.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add names for AMCGPIO regs to make it easier to identify these in
trace output. This is where rage128p has the DDC from the DVI port
among others but because we don't implement the flat panel controller
we don't want to connect an EDID here to make sure drivers use the VGA
output instead. But since these are often probed by drivers it helps
to see what happens by logging these registers by name.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 31ff69ca6959d090869907774faa1af7d2c02b2b.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Some drivers (e.g. Linux radeon drm and MacOS) access these to find
apertures to access card. Try to implement these but not sure these
are correct yet.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: b2df13655feecd63c0049ec45fd87d1026f67091.1565558093.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related
to the system-emulator. Evidence:
* It's included widely: in my "build everything" tree, changing
sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600
objects (not counting tests and objects that don't depend on
qemu/osdep.h, down from 5400 due to the previous two commits).
* It pulls in more than a dozen additional headers.
Split stuff related to run state management into its own header
sysemu/runstate.h.
Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h
also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400
to 4200. Touching new sysemu/runstate.h recompiles some 500 objects.
Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also
add qemu/main-loop.h.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-30-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
[Unbreak OS-X build]
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 1800 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h, down from 5400 due to the
previous commit).
Several headers include sysemu/sysemu.h just to get typedef
VMChangeStateEntry. Move it from sysemu/sysemu.h to qemu/typedefs.h.
Spell its structure tag the same while there. Drop the now
superfluous includes of sysemu/sysemu.h from headers.
Touching sysemu/sysemu.h now recompiles some 1100 objects.
qemu/uuid.h also drops from 1800 to 1100, and
qapi/qapi-types-run-state.h from 5000 to 4400.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-29-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/qdev-core.h includes sysemu/sysemu.h since recent commit e965ffa70a
"qdev: add qdev_add_vm_change_state_handler()". This is a bad idea:
hw/qdev-core.h is widely included.
Move the declaration of qdev_add_vm_change_state_handler() to
sysemu/sysemu.h, and drop the problematic include from hw/qdev-core.h.
Touching sysemu/sysemu.h now recompiles some 1800 objects.
qemu/uuid.h also drops from 5400 to 1800. A few more headers show
smaller improvement: qemu/notify.h drops from 5600 to 5200,
qemu/timer.h from 5600 to 4500, and qapi/qapi-types-run-state.h from
5500 to 5000.
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190812052359.30071-28-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing sysemu/sysemu.h triggers a
recompile of some 5400 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Almost a third of its inclusions are actually superfluous. Delete
them. Downgrade two more to qapi/qapi-types-run-state.h, and move one
from char/serial.h to char/serial.c.
hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and
stubs/semihost.c define variables declared in sysemu/sysemu.h without
including it. The compiler is cool with that, but include it anyway.
This doesn't reduce actual use much, as it's still included into
widely included headers. The next commit will tackle that.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-27-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
In my "build everything" tree, changing hw/qdev-properties.h triggers
a recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
Many places including hw/qdev-properties.h (directly or via hw/qdev.h)
actually need only hw/qdev-core.h. Include hw/qdev-core.h there
instead.
hw/qdev.h is actually pointless: all it does is include hw/qdev-core.h
and hw/qdev-properties.h, which in turn includes hw/qdev-core.h.
Replace the remaining uses of hw/qdev.h by hw/qdev-properties.h.
While there, delete a few superfluous inclusions of hw/qdev-core.h.
Touching hw/qdev-properties.h now recompiles some 1200 objects.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Daniel P. Berrangé" <berrange@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-Id: <20190812052359.30071-22-armbru@redhat.com>
In my "build everything" tree, changing qemu/main-loop.h triggers a
recompile of some 5600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h). It includes block/aio.h,
which in turn includes qemu/event_notifier.h, qemu/notify.h,
qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h,
qemu/thread.h, qemu/timer.h, and a few more.
Include qemu/main-loop.h only where it's needed. Touching it now
recompiles only some 1700 objects. For block/aio.h and
qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the
others, they shrink only slightly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-21-armbru@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/hw.h triggers a recompile
of some 2600 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
The previous commits have left only the declaration of hw_error() in
hw/hw.h. This permits dropping most of its inclusions. Touching it
now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-19-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Drop unnecessary inclusions from headers. Downgrade a few more to
exec/hwaddr.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-17-armbru@redhat.com>
In my "build everything" tree, changing migration/vmstate.h triggers a
recompile of some 2700 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get VMStateDescription. The previous commit made
that unnecessary.
Include migration/vmstate.h only where it's still needed. Touching it
now recompiles only some 1600 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20190812052359.30071-16-armbru@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing hw/irq.h triggers a recompile
of some 5400 out of 6600 objects (not counting tests and objects that
don't depend on qemu/osdep.h).
hw/hw.h supposedly includes it for convenience. Several other headers
include it just to get qemu_irq and.or qemu_irq_handler.
Move the qemu_irq and qemu_irq_handler typedefs from hw/irq.h to
qemu/typedefs.h, and then include hw/irq.h only where it's still
needed. Touching it now recompiles only some 500 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-13-armbru@redhat.com>
In my "build everything" tree, changing migration/qemu-file-types.h
triggers a recompile of some 2600 out of 6600 objects (not counting
tests and objects that don't depend on qemu/osdep.h).
The culprit is again hw/hw.h, which supposedly includes it for
convenience.
Include migration/qemu-file-types.h only where it's needed. Touching
it now recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190812052359.30071-10-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
In my "build everything" tree, changing sysemu/reset.h triggers a
recompile of some 2600 out of 6600 objects (not counting tests and
objects that don't depend on qemu/osdep.h).
The main culprit is hw/hw.h, which supposedly includes it for
convenience.
Include sysemu/reset.h only where it's needed. Touching it now
recompiles less than 200 objects.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190812052359.30071-9-armbru@redhat.com>
TYPE_IOMMU_MEMORY_REGION is a direct subtype of TYPE_MEMORY_REGION.
Its instance struct is IOMMUMemoryRegion, and its first member is a
MemoryRegion. Correct. Its class struct is IOMMUMemoryRegionClass,
and its first member is a DeviceClass. Wrong. Messed up when commit
1221a47467 introduced the QOM type. It even included hw/qdev-core.h
just for that.
TYPE_MEMORY_REGION doesn't bother to define a class struct. This is
fine, it simply defaults to its super-type TYPE_OBJECT's class struct
ObjectClass. Changing IOMMUMemoryRegionClass's first member's type to
ObjectClass would be a minimal fix, if a bit brittle: if
TYPE_MEMORY_REGION ever acquired own class struct, we'd have to update
IOMMUMemoryRegionClass to use it.
Fix it the clean and robust way instead: give TYPE_MEMORY_REGION its
own class struct MemoryRegionClass now, and use it for
IOMMUMemoryRegionClass's first member.
Revert the include of hw/qdev-core.h, and fix the few files that have
come to rely on it.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20190812052359.30071-5-armbru@redhat.com>
Set QEMU_PCI_CAP_EXPRESS unconditionally in init(), then clear it in
realize() in case the device is not connected to a PCIe bus.
This makes sure the pci config space allocation is big enough, so
accessing the PCIe extended config space doesn't overflow the pci
config space buffer.
PCI(e) config space is guest writable. Writes are limited by
write mask (which probably is also filled with random stuff),
so the guest can only flip enabled bits. But I suspect it
still might be exploitable, so rather serious because it might
be a host escape for the guest. On the other hand the device
is probably not yet in widespread use.
(For a QEMU version without this commit, a mitigation for the
bug is available: use "-device bochs-display" as a conventional pci
device only.)
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20190812065221.20907-2-kraxel@redhat.com
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This reverts commit f2784eed30
since that accidentally removes the PCIe capabilities from virtio
devices because virtio_pci_dc_realize is called before the new 'mode'
flag is set.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190729162903.4489-3-dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
In the previous commit we fixed a crash when the guest read a
register that pop from an empty FIFO.
By auditing the repository, we found another similar use with
an easy way to reproduce:
$ qemu-system-aarch64 -M xlnx-zcu102 -monitor stdio -S
QEMU 4.0.50 monitor - type 'help' for more information
(qemu) xp/b 0xfd4a0134
Aborted (core dumped)
(gdb) bt
#0 0x00007f6936dea57f in raise () at /lib64/libc.so.6
#1 0x00007f6936dd4895 in abort () at /lib64/libc.so.6
#2 0x0000561ad32975ec in xlnx_dp_aux_pop_rx_fifo (s=0x7f692babee70) at hw/display/xlnx_dp.c:431
#3 0x0000561ad3297dc0 in xlnx_dp_read (opaque=0x7f692babee70, offset=77, size=4) at hw/display/xlnx_dp.c:667
#4 0x0000561ad321b896 in memory_region_read_accessor (mr=0x7f692babf620, addr=308, value=0x7ffe05c1db88, size=4, shift=0, mask=4294967295, attrs=...) at memory.c:439
#5 0x0000561ad321bd70 in access_with_adjusted_size (addr=308, value=0x7ffe05c1db88, size=1, access_size_min=4, access_size_max=4, access_fn=0x561ad321b858 <memory_region_read_accessor>, mr=0x7f692babf620, attrs=...) at memory.c:569
#6 0x0000561ad321e9d5 in memory_region_dispatch_read1 (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1420
#7 0x0000561ad321ea9d in memory_region_dispatch_read (mr=0x7f692babf620, addr=308, pval=0x7ffe05c1db88, size=1, attrs=...) at memory.c:1447
#8 0x0000561ad31bd742 in flatview_read_continue (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1, addr1=308, l=1, mr=0x7f692babf620) at exec.c:3385
#9 0x0000561ad31bd895 in flatview_read (fv=0x561ad69c04f0, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3423
#10 0x0000561ad31bd90b in address_space_read_full (as=0x561ad5bb3020, addr=4249485620, attrs=..., buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", len=1) at exec.c:3436
#11 0x0000561ad33b1c42 in address_space_read (len=1, buf=0x7ffe05c1dcf0 "\020\335\301\005\376\177", attrs=..., addr=4249485620, as=0x561ad5bb3020) at include/exec/memory.h:2131
#12 0x0000561ad33b1c42 in memory_dump (mon=0x561ad59c4530, count=1, format=120, wsize=1, addr=4249485620, is_physical=1) at monitor/misc.c:723
#13 0x0000561ad33b1fc1 in hmp_physical_memory_dump (mon=0x561ad59c4530, qdict=0x561ad6c6fd00) at monitor/misc.c:795
#14 0x0000561ad37b4a9f in handle_hmp_command (mon=0x561ad59c4530, cmdline=0x561ad59d0f22 "/b 0x00000000fd4a0134") at monitor/hmp.c:1082
Fix by checking the FIFO is not empty before popping from it.
The datasheet is not clear about the reset value of this register,
we choose to return '0'.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20190709113715.7761-4-philmd@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Turns out my last fix to this broke one case for Rage 128 Pro so
revert that part of previous patch. This now fixes the remaining
rendering problems for MorphOS which now can produce picture with
-device ati-vga (although it may not be optimised yet and video
overlay emulation is still known to be missing).
Fixes: 866ad5f5ff
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: da33261a841755691f698db8190c868df0c0d3ae.1562276605.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The pixman library only supports blts with left to right, top to
bottom order but the ATI VGA engine can also do different directions.
Fix support for these via a temporary buffer for now. This fixes
rendering issues related to such blts (such as moving windows) but
some other glitches still remain.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: e21855faaeb30d7b1771f084f283f6a30bedb1a3.1562227303.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The extended mode frame buffer should be little endian even when
emulating big endian machine (such as PPC). This fixes color problems
with MorphOS.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 439aa85061f103446df7b42632d730971a372432.1562151410.git.balaton@eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the bitbang_i2c_init() function allocates a
bitbang_i2c_interface struct which it returns. This is unfortunate
because it means that if the function is used from a DeviceState
init method then the memory will be leaked by an "init then delete"
cycle, as used by the qmp/hmp commands that list device properties.
Since three out of four of the uses of this function are in
device init methods, switch the function to do an in-place
initialization of a struct that can be embedded in the
device state struct of the caller.
This fixes LeakSanitizer leak warnings that have appeared in the
patchew configuration (which only tries to run the sanitizers
for the x86_64-softmmu target) now that we use the bitbang-i2c
code in an x86-64 config.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: BALATON Zoltan <balaton@eik.bme.hu>
Tested-by: BALATON Zoltan <balaton@eik.bme.hu>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20190702163844.20458-1-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
While loading virtio-gpu, the data can be malicious, we
should check if the resource already exists.
Signed-off-by: Li Qiang <liq3ea@163.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190628161358.10400-1-liq3ea@163.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We land here in case not everything we've asked for could be mapped.
So unmap only the bytes which have actually been mapped.
Also we didn't access anything, so acces_len can be 0.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Li Qiang <liq3ea@gmail.com>
Message-id: 20190628072357.31782-1-kraxel@redhat.com
Fix bit masks of registers for offset and pitch and also handle
default values for both R128P and RV100. This improves picture a bit
but does not resolve all problems yet so there might be some more bugs
somewhere.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190624100005.7A1CA746395@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This adds DDC support to ati-vga and connects i2c-ddc to it. This
allows at least MacOS with an ATI ndrv, Linux radeonfb and MorphOS to
get monitor EDID info (although MorphOS splash screen is not displayed
and radeonfb needs additional tables from vgabios-rv100). Xorg needs
additional support from VESA vgabios, it's missing INT10 0x4F15
function (see
https://gitlab.freedesktop.org/xorg/xserver/blob/master/hw/xfree86/vbe/vbe.c)
without which no DDC is available that also prevents loading the
accelerated X driver.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 046ddebb7ec8db48c4e877ee444ec1c41e385a74.1561028123.git.balaton@eik.bme.hu
ati-vga: Clarify comment
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190620195213.C54127461AE@zero.eik.bme.hu
ati-vga: Add DDC reg names for debug
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-id: 20190621181459.2F8207462AA@zero.eik.bme.hu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A Xen public header have been imported into QEMU (by
f65eadb639 "xen: import ring.h from xen"), but there are other header
that depends on ring.h which come from the system when building QEMU.
This patch resolves the issue of having headers from the system
importing a different copie of ring.h.
This patch is prompt by the build issue described in the previous
patch: 'Revert xen/io/ring.h of "Clean up a few header guard symbols"'
ring.h and the new imported headers are moved to
"include/hw/xen/interface" as those describe interfaces with a guest.
The imported headers are cleaned up a bit while importing them: some
part of the file that QEMU doesn't use are removed (description
of how to make hypercall in grant_table.h have been removed).
Other cleanup:
- xen-mapcache.c and xen-legacy-backend.c don't need grant_table.h.
- xenfb.c doesn't need event_channel.h.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Message-Id: <20190621105441.3025-3-anthony.perard@citrix.com>
Commit d52c454aad "contrib: add vhost-user-gpu" and "c68082c43a
virtio-gpu: split virtio-gpu-pci & virtio-vga" created headers with
unusual header guard symbols. Clean them up
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190607141321.9726-1-armbru@redhat.com>
No header includes qemu-common.h after this commit, as prescribed by
qemu-common.h's file comment.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190523143508.25387-5-armbru@redhat.com>
[Rebased with conflicts resolved automatically, except for
include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c
block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c
target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h
target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h
target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h
target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and
net/tap-bsd.c fixed up]
Add new virtio-gpu devices with a "vhost-user" property. The
associated vhost-user backend is used to handle the virtio rings and
provide rendering results thanks to the vhost-user-gpu protocol.
Example usage:
-object vhost-user-backend,id=vug,cmd="./vhost-user-gpu"
-device vhost-user-vga,vhost-user=vug
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-10-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add base classes that are common to vhost-user-gpu-pci and
vhost-user-vga.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-9-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a base class that is common to virtio-gpu and vhost-user-gpu
devices.
The VirtIOGPUBase base class provides common functionalities necessary
for both virtio-gpu and vhost-user-gpu:
- common configuration (max-outputs, initial resolution, flags)
- virtio device initialization, including queue setup
- device pre-conditions checks (iommu)
- migration blocker
- virtio device callbacks
- hooking up to qemu display subsystem
- a few common helper functions to reset the device, retrieve display
informations
- a class callback to unblock the rendering (for GL updates)
What is left to the virtio-gpu subdevice to take care of, in short,
are all the virtio queues handling, command processing and migration.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-8-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This will allow to share the format conversion function with
vhost-user-gpu.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-id: 20190524130946.31736-4-marcandre.lureau@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
