Add a dummy implementation of the cp15 registers for the generic
timer (found in the Cortex-A15), just sufficient for Linux to
decide that it can't use it. This requires at least CNTP_CTL and
CNTFRQ to be implemented as RAZ/WI; we RAZ/WI all of c14.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Long term, the config_base_register will be a QDM parameter. In the
meantime, models that use it need to be able to preserve it across
cpu_reset() calls.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In the helper routines for VCVT float-to-int conversions, add
an explicit cast rather than relying on the softfloat int32
type being exactly 32 bits wide (which it is not guaranteed to be).
Without this, if the softfloat type was 64 bits wide we would
get zero-extension of the 32 bit value from the ARM register
rather than sign-extension, since TCG i32 values are passed as
uint32_t.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix some bugs in the implementation of the TLB invalidate
operations on ARM:
* the 'invalidate all' op was not passing flush_global=1
to tlb_flush(); this doesn't have a practical effect since
tlb_flush() currently ignores that argument, but is
semantically incorrect
* 'invalidate by address for all ASIDs' was implemented as
flushing the whole TLB, which invalidates much more than
strictly necessary. Use tlb_flush_page() instead.
We also annotate the ops with the ARM ARM official acronyms.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix errors in the decode of M profile CPS:
* the decode of the I (affects PRIMASK) and F (affects FAULTMASK)
bits was reversed
* the FAULTMASK system register number is 19, not 17
This fixes an issue reported as LP:913925.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add dummy register support for the cp15, CRn=c15 registers.
config_base_register and power_control_register currently
default to 0, but may have improved support after the QOM
CPU patches are finished.
Signed-off-by: Mark Langsdorf <mark.langsdorf@calxeda.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Ignore attempts to set the CPSR mode field to an invalid value.
This is UNPREDICTABLE, but we should not cpu_abort() for things
a malicious guest (or a confused user on the gdbstub interface)
can provoke.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Avoid using cpu_single_env in bank_number() -- if we were
called via the gdb stub reading or writing the CPSR then
it is NULL and we will segfault if we take the cpu_abort().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Return the correct value in the domain field in the cp15 DFSR
(C5) -- bug noticed during Xvisor development.
Signed-off-by: Jean-Christophe DUBOIS <jcd@tribudubois.net>
[Peter Maydell: reworded commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clarify some slightly misleading comments in the Thumb decoder's
handling of the memory hint space -- in particular one code path
marked as 'UNPREDICTABLE or unallocated hint' also includes some
legitimate preload instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
env is allocated in cpu_arm_init() with g_malloc0(), so free with g_free().
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix the restoring of VFP registers on vmload.
Signed-off-by: Dmitry Koshelev <karaghiozis@gmail.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[peter.maydell: improved commit message a little]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Implement the fused multiply-accumulate instructions (VFMA, VFMS,
VFNMA, VFNMS) which are new in VFPv4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add support for UDIV and SDIV in ARM mode. This is a new optional
feature for A profile cores (Thumb mode has had UDIV and SDIV for
M profile cores for some time).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rename the ARM_FEATURE_DIV feature bit to _THUMB_DIV, to
make room for a new feature switch enabling DIV in the ARM
encoding. (Cores may implement either (a) no divide insns
(b) divide insns in Thumb encodings only (c) divide insns
in both ARM and Thumb encodings.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clean up the decoding of the v6 media multiply space so that we UNDEF
on unassigned encodings rather than randomly interpreting them as
some instruction in this space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Indeed, the result is known to be always positive.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Fix a bug in bccd9ec5f0,
target-arm/op_helper.c missed a change unlike all other targets.
This lead to a NULL pointer dereferences.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The command line option is called -kernel, not -kenrel.
Cc: Paul Brook <paul@codesourcery.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Parameter is_softmmu (and its evil mutant twin brother is_softmuu)
is not used in cpu_*_handle_mmu_fault() functions, remove them
and adjust callers.
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Move softmmu_exec.h include directives from target-*/exec.h to
target-*/op_helper.c. Move also various other stuff only used in
op_helper.c there.
Define global env in dyngen-exec.h.
For i386, move wrappers for segment and FPU helpers from user-exec.c
to op_helper.c. Implement raise_exception_err_env() to handle dynamic
CPUState. Move the function declarations to cpu.h since they can be
used outside of op_helper.c context.
LM32, s390x, UniCore32: remove unused cpu_halted(), regs_to_env() and
env_to_regs().
ARM: make raise_exception() static.
Convert
#include "exec.h"
to
#include "cpu.h"
#include "dyngen-exec.h"
and remove now unused target-*/exec.h.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Remove some stray printfs for cases which don't generally happen
(some VFP UNDEF cases, reads and writes to unknown cp14 registers);
we should simply generate an UNDEF when the instruction is executed.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VCVTT/VCVTB with bit 8 set is UNPREDICTABLE; we choose to UNDEF.
This avoids a TCG assert later when the VCVTT/VCVTB code tries to
use a source register that wasn't ever set up.
We pull the check for the presence of the half-precision extension
up in to this common code as well.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Handle the UNDEF and UNPREDICTABLE cases for VLDM and VSTM. In
particular, we now generate an undef exception for overlarge imm8
values rather than generating 1000+ TCG ops and hitting an assertion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
ARMv6 implemented various operations as special cases of cp15 accesses
which are true instructions in v7; this includes barriers (DMB, DSB, ISB).
Catch this special case at translate time, so that it works in linux-user
mode (which doesn't provide a functional get_cp15 helper) as well as
system mode.
Includes minor cleanup of the existing cases (single switch statement,
and doing the "OK in user mode?" test explicitly rather than hiding it in
cp15_user_ok()).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 1136r1 is actually a v6K core (unlike the 1136r0); mark it as such,
thus enabling the TLS registers, NOP hints, CLREX, half and byte wide
exclusive load/stores, etc.
The VA-to-PA translation registers are not present on 1136r1, so
introduce a new feature flag for them, which is enabled on 1176,
11MPCore and all v7 cores.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Jamie Iles <jamie@jamieiles.com>
Add support for v6K ARM1176JZF-S. This core includes the VA<->PA
translation capability and security extensions.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The VMSAv7 remapping and access permissions were introduced in ARMv6K
and not ARMv7.
Signed-off-by: Jamie Iles <jamie@jamieiles.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Correct typos of "licenced" to "licensed".
Reviewed-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Andreas F=E4rber <andreas.faerber@web.de>
Signed-off-by: Matthew Fernandez <matthew.fernandez@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm:
target-arm: Fix BASEPRI, BASEPRI_MAX, and FAULTMASK access
target-arm: Minimal implementation of performance counters
Revert "Makefile.target: Allow target helpers to be in any *_helper.c file"
Revert "target-arm: Use global env in neon_helper.c helpers"
target-arm: Pass fp status pointer explicitly to neon fp helpers
target-arm: Make VFP binop helpers take pointer to fpstatus, not CPUState
target-arm: Add helper function to generate code to get fpstatus pointer
Revert "target-arm: Use global env in iwmmxt_helper.c helpers"
Conflicts:
Makefile.target
Parameter 'info' is const, so add the missing attribute.
v2:
Add 'const' to the local variable info in do_cpu_reset() and to
the boot_info field in CPUARMState (suggested by Peter Maydell).
Cc: Andrzej Zaborowski <balrogg@gmail.com>
Cc: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Move functions cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. This is
needed by later patches.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Before the next patch, fix coding style of the areas affected.
Change the type of the return value from cpu_has_work() and
qemu_cpu_has_work() to bool.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Correct the decode of the register numbers for BASEPRI, BASEPRI_MAX
and FAULTMASK, according to "ARMv7-M Architecture Reference Manual"
issue D section "B5.2.3 MRS" and "B5.2.3 MSR".
Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Newer Linux kernels assume the existence of the performance counter
cp15 registers. Provide a minimal implementation of these registers.
We support no events. This should be compliant with the ARM ARM,
except that we don't implement the cycle counter.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This effectively reverts commit 2a3f75b42a
so that we return to passing CPUState to helpers as an explicit parameter.
(There were a number of conflicts in target-arm/translate.c which had
to be resolved by hand so it is not a pure revert.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the Neon helpers for various floating point operations take an
explicit pointer to the float_status they use, so they don't rely on
the global environment pointer any more. This also allows us to drop
the mul/sub/add helpers completely and just use the vfp versions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Make the VFP binop helper functions take a pointer to the fp status, not
the entire CPUState. This will allow us to use them for Neon operations too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add and use a helper function which returns a TCGv which is a pointer
to the fp_status for either Neon or VFP operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the correct _ptr aliases for manipulating the pointer to
the fp_status; this fixes a compilation failure on 64 bit hosts.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Remove a preprocessor #define which is never used.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If the input to a Neon float comparison is a quiet NaN, the ARM ARM
specifies that we should raise InvalidOp if the comparison is GE or GT
but not for EQ. (Signaling NaNs raise InvalidOp regardless). This means
only EQ should use the _quiet version of the comparison function.
We implement this by cleaning up the comparison helpers to call the
appopriate versions of the softfloat simple comparison functions
(float32_le and friends) rather than the generic float32_compare functions.
This makes them simple enough that they are clearer opencoded rather
than macroised.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Neon versions of int-float conversions must use the "standard FPSCR"
rather than the default FPSCR. Implement this by having the helper
functions take a pointer to the appropriate float_status value rather
than simply taking a pointer to the entire CPUState, and making
translate.c pass a pointer to vfp.fp_status or vfp.standard_fp_status
appropriately for whether the instruction being translated is Neon
or VFP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
On ARM the architecture mandates that when an output denormal is flushed to
zero we must set the FPSCR UFC (underflow) bit, so map softfloat's
float_flag_output_denormal accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The helpers for VRECPE.F32, VSQRTE.F32, VRECPS and VRSQRTS handle denormals
as special cases, so we must set the InputDenormal exception flag ourselves.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The functions which do the core estimation algorithms for the VRSQRTE
and VRECPE instructions should not set floating point exception flags,
so use a local fp status for doing these calculations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct handling of NaNs for VFP VMLA, VMLS, VNMLS and VNMLA requires that
we implement the set of negations and additions specified by the ARM ARM;
plausible looking simplifications like turning (-A + B) into (B - A) or
computing (A + B) rather than (B + A) result in selecting the wrong NaN or
returning a NaN with the wrong sign bit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The code changed here is an unused data type name (evt_flush_occurred).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Make sure the base register isn't updated if it is in the load list
for a Thumb LDM (T1 encoding) which aborts partway through the load.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
target-arm: fix LDMIA bug on page boundary
When consecutive memory locations are on page boundary, a base register may be
loaded before page fault occurs. After page fault handling, it losts the memory
location information. To solve this problem, loading a base register has to put back.
Signed-off-by: Yuyeon Oh <yuyeon.oh@samsung.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly UNDEF for Neon VLD/VST "multiple structures" forms where the
align field is not valid.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle the UNDEF and UNPREDICTABLE cases for Neon "single element to
one lane" VLD and "single element from one lane" VST.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When we catch the special case of an input NaN in ARM float to int
helper functions, set the Invalid flag as well as returning the
correct result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Basic implementation of DEC/Intel SA-1100/SA-1110 chips emulation.
Implemented:
- IRQs
- GPIO
- PPC
- RTC
- UARTs (no IrDA/etc.)
- OST reused from pxa25x
Everything else is TODO (esp. PM/idle/sleep!) - see the todo in the
hw/strongarm.c
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The previous patch removed the need for parameter puc.
Is is now unused, so remove it.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Function gen_pc_load was introduced in commit
d2856f1ad4.
The only reason for parameter searched_pc was
a debug statement in target-i386/translate.c.
Parameter puc was needed by target-sparc until
commit d7da2a1040.
Remove searched_pc from the debug statement and remove both
parameters from the parameter list of gen_pc_load.
As the function name gen_pc_load was also misleading,
it is now called restore_state_to_opc. This new name
was suggested by Peter Maydell, thanks.
v2: Remove last parameter, too, and rename the function.
v3: Fix [] typo in target-arm/translate.c.
Fix wrong SHA1 object name in commit message (copy+paste error).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
This provides a consistent naming scheme across all targets.
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
helpfull -> helpful
usefull -> useful
cotrol -> control
and a grammar fix.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
In the VABAL instruction we take the absolute difference of two
values of size x and store it in a result of size 2x. This means
we have to be careful to calculate the absolute difference using
a wide enough type that we don't accidentally overflow.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The ARM architecture mandates that we detect tininess before rounding,
so set the softfloat fp_status up appropriately.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Catch the UNPREDICTABLE case for Neon VTBL,VTBX, and UNDEF it
rather than allowing the helper function to index off the end
of the register file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Many of the Neon "2 register misc" instruction forms require invalid
size fields to cause the instruction to UNDEF. Pull this information
out into an array; this simplifies the code and also means we can do
the check early and avoid the problem of leaking TCG temporaries in
the illegal_op case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add missing checks for cases which must UNDEF in the Neon "2 registers and
a scalar" data processing instruction space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add missing UNDEF checks for instructions in the Neon "3 registers of
different widths" data processing space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For Neon "one register and a modified immediate value" forms, the
combination op=1 cmode=1111 is unallocated and should UNDEF.
All instructions of this form also UNDEF if Q == 1 and Vd<0> == 1.
We also add a comment on the only UNPREDICTABLE in this space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Collapse some switch cases for VSRI into those for VSHL, VSLI,
since the bodies are the same. (This is not completely obvious
for the size < 3 case, but since for VSRI we know U=1 the
GEN_NEON_INTEGER_OP() expansion is equivalent to the open-coded
VSHL/VSLI case.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle all the UNDEF cases for Neon instructions of the
"2 registers and shift" form, and make sure that we check for these
cases early enough not to leak TCG temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Since we know that the case of (pairwise && q) has been caught
earlier, we can simplify the register setup code for each pass
in the three-register-same-size Neon loop.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the handling of UNDEF cases for the NEON "3 registers same
size" forms, by adding missing checks and rationalising some others
so they are done early enough to avoid leaking TCG temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Simplify the checks for invalid size values for the Neon "three registers
of the same size" instruction forms (and add them where they were missing)
by using a lookup table.
This includes adding symbolic constants for the op values in this space,
since we now use them in multiple places.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Currently target-arm/ assumes at least ARMv5 core. Add support for
handling also ARMv4/ARMv4T. This changes the following instructions:
BX(v4T and later)
BKPT, BLX, CDP2, CLZ, LDC2, LDRD, MCRR, MCRR2, MRRC, MCRR, MRC2, MRRC,
MRRC2, PLD QADD, QDADD, QDSUB, QSUB, STRD, SMLAxy, SMLALxy, SMLAWxy,
SMULxy, SMULWxy, STC2 (v5 and later)
All instructions that are "v5TE and later" are also bound to just v5, as
that's how it was before.
This patch doesn _not_ include disabling of cp15 access and base-updated
data abort model (that will be required to emulate chips based on a
ARM7TDMI), because:
* no ARM7TDMI chips are currently emulated (or planned)
* those features aren't strictly necessary for my purposes (SA-1 core
emulation).
All v5 models are handled as they are v5T. Internally we still have a
check if the model is a v5(T) or v5TE, but as all emulated cores are
v5TE, those two cases are simply aliased (for now).
Patch is heavily based on patch by Filip Navara <filip.navara@gmail.com>
which in turn is based on work by Ulrich Hecht <uli@suse.de> and Vincent
Sanders <vince@kyllikki.org>.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
tcg_gen_exit_tb takes a parameter of type tcg_target_long,
so the type casts of pointer to long should be replaced by
type casts of pointer to tcg_target_long (suggested by Blue Swirl).
These changes are needed for build environments where
sizeof(long) != sizeof(void *), especially for w64.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Make the Neon helper routines use the correct FP status from
the CPUEnv rather than using a dummy static one. This means
they will correctly handle denormals and NaNs and will set
FPSCR exception bits properly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the global 'env' variable in the helper functions in iwmmxt_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the global 'env' variable in the helper functions in neon_helper.c.
This means we don't need to pass env as an argument to them any more.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the argument and return types for the float<->int conversion helper
functions so that integer arguments and return values are declared as
uint32_t/uint64_t, not float32/float64. This allows us to remove the
hand-rolled functions which were doing bitwise copies between the types
via unions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the new softfloat min/max functions to implement the Neon VMAX
and VMIN instructions. This allows us to get the right behaviour
for NaN and negative zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement ABD by taking the absolute value of the difference
of the operands (as the ARM ARM specifies) rather than by
flipping the order of the operands to the subtract based
on the results of a comparison. The latter approch gives
the wrong answers for some edge cases like negative zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implementing the floating-point versions of VCLE #0 and VCLT #0 by
doing a GT comparison and inverting the result gives the wrong
result if the input is a NaN. Implement as a GT comparison with the
operands swapped instead.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the helper functions implementing the Neon floating point comparison
ops (VCGE, VCGT, VCEQ, VACGT, VACGE) to return the right answer when
one of the values being compared is a NaN.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the softfloat make_float32 and float32_val macros to convert between
softfloat's float32 type and raw uint32_t types, rather than private
conversion functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move the allocation and freeing of the TCG temp used for the address for
Neon load/store instructions so that we don't allocate the temporary
until we've done enough decoding to know that the instruction is not
an UNDEF pattern; this avoids leaking the TCG temp in these cases.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix several bugs in VLD of single element to all lanes:
The "single element to all lanes" form of VLD1 differs from those for
VLD2, VLD3 and VLD4 in that bit 5 indicates whether the loaded element
should be written to one or two Dregs (rather than being a register
stride). Handle this by special-casing VLD1 rather than trying to
have one loop which deals with both VLD1 and 2/3/4.
Handle VLD4.32 with 16 byte alignment specified, rather than UNDEFfing.
UNDEF for the invalid size and alignment combinations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The preferred way to create a constant floating point value is to use
make_float32() rather than doing a runtime int32_to_float32().
Convert the code in the VRSQRTS helper to work this way.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correct the handling of edge cases for the VRECPS instruction:
* this is a Neon instruction so uses the "standard FPSCR value"
* (zero, inf) is a special case which returns 2.0
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
SMUAD and SMLAD are supposed to set the Q bit if the addition of
the two 16x16 multiply products and optional accumulator overflows
considered as a signed value. However we were only doing this check
for the addition of the accumulator, not when adding the products,
with the effect that we were mishandling the edge case where
both inputs are 0x80008000.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix the signed modulo arithmetic helpers for the v6media
instructions (SADD8, SSUB8, SADD16, SSUB16, SASX, SSAX) to set
the GE bits correctly (based on the result of the add or subtract
before it is truncated to 16 bits, not after).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Decode of Thumb load/store was merging together the cases of 'bit 11==0'
(reg+reg LSL imm) and 'bit 11==1' (reg+imm). This happens to work for
valid instruction patterns but meant that we would not UNDEF for the
cases the architecture mandates that we must. Make the decode actually
look at bit 11 as well as [10..8] so that we UNDEF in the right places.
This change also removes what was a spurious unreachable 'case 8',
and correctly frees TCG temporaries on the illegal-insn codepaths.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
All implementations are now the same, and there is only one caller,
so inline the function there.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Newer ARM kernels try to probe for whether the CPU has hardware breakpoint
support. For this to work QEMU has to implement a minimal set of the cp14
debug registers. The architecture requires v7 cores to implement debug
and so there is no defined way to report its absence; however in practice
returning a zero DBGDIDR (ie with a reserved value for "debug architecture
version") should cause well-written hw debug users to do the right thing.
We also implement DBGDRAR and DBGDSAR as RAZ, indicating no memory mapped
debug components.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Use the new TCG temporary leak debugging facilities to
check that each ARM instruction does not leak temporaries.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This commit removes the ad-hoc resource leak checking code from
target-arm. This includes replacing all uses of new_tmp() with
tcg_temp_new_i32() and all uses of dead_tmp() with
tcg_temp_free_i32().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement VA->PA translations by cp15-c7 that went through unchanged
previously.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The code for Thumb2 ORNS (or negated and set flags) was trashing
a TCG input register which was needed later for use in calculating
flags, with the effect that the carry flag was always set with
the wrong sense. Fix this by using the TCG orc op instead of
separate not and or ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix two bugs in the translation of the instructions VMOV sa,sb,rx,ry and
VMOV rx,ry,sa,sb (which copy between a pair of ARM core registers and a
pair of VFP single precision registers):
* An incorrect condition meant these instruction patterns were being
treated as load/store multiple, which resulted in the generation
of bad code and a runtime segfault
* The order of the core register pair was reversed so the values would
go to the wrong registers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
In v7 of the ARM architecture, WFI (wait for interrupt) is a first-class
instruction, but in previous versions this functionality was provided
via a cp15 coprocessor register. Add correct feature checks to the
decoding of the cp15 WFI instructions so that they behave correctly
for newer cores. In particular, the old 0,c7,c8,2 encoding used on
ARM940 has been reused for VA-to-PA translation in v6 and v7.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now use the same algorithm as described in the ARM ARM.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Now use the same algorithm as described in the ARM ARM.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These two constants will be used by helper functions such as recpe_f32
and rsqrte_f32.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For Neon shifts by immediate and narrow, correctly handle the case
where the source registers and the destination registers overlap
(the second pass should use the original register contents, not the
results of the first pass).
This includes a refactoring to pull the size check outside the
loop rather than inside, since there is now very little common
code between the size == 3 and size != 3 case.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Pull the code which decodes narrowing operations as being either
signed/unsigned saturate or plain out into its own function.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle VQRSHL of unsigned values by a shift count of the
width of the data type or larger, which must be special-cased in the
qrshl_u* helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle the case of signed VQRSHL by a shift count of the width of the
data type or larger, which must be special cased in the qrshl_s*
helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Call the normal shift helpers instead of the rounding ones.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix value returned by signed 8 and 16 bit qrshl helpers
when the result has saturated.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix range of shift amounts which always give 0 as result.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix handling of unsigned VRSHL.s8 and .s16 right shifts by the type
width.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Correctly handle VRSHL of signed values by a shift count of the
width of the data type or larger, which must be special-cased in the
rshl_s* helper functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Handle cases where adding the rounding constant could overflow in Neon
shift instructions: VRSHR, VRSRA, VQRSHRN, VQRSHRUN, VRSHRN.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
[peter.maydell@linaro.org: fix handling of large shifts in rshl_s32,
calculate signed saturated value as other functions do.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move the implementation of the Neon VUZP unzip instruction from inline
code to helper functions. (At 50+ TCG ops it was well over the
recommended limit for coding inline.) The helper implementations also
give the correct answers where the inline implementation did not.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move the implementation of the Neon VUZP unzip instruction from inline
code to helper functions. (At 50+ TCG ops it was well over the
recommended limit for coding inline.) The helper implementations also
fix the handling of the quadword version of the instruction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
We handle Thumb Neon data processing instructions by converting them
into the equivalent ARM encoding, as the two are very close. However
the ARM encoding should have bit 28 set, not clear. This wasn't causing
any problems because we don't actually look at that bit during decode;
however it is better to do the conversion correctly to avoid problems
later if we add checks to UNDEF on SBZ/SBO bits.
Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
For VQDMLSL, negation has to occur after saturation, not before.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Refactor the handling of VQDMULL so that it is dealt with in
its own if() case rather than together with the accumulating
instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Implement VMULL.P8 (the 32x32->64 version of the polynomial multiply
instruction).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
These two fields were added as a part of ARMv7 support patch (back in
2007), were never used by any code, so can be dropped.
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
Remove a stray #include <stdio.h> from the middle of neon_helper.c:
it was harmless but pointless since we include stdio.h at the top
of the file anyway.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The Neon half-precision conversion operations (VCVT.F16.F32 and
VCVT.F32.F16) use ARM standard floating-point arithmetic, unlike
the VFP versions (VCVTB and VCVTT).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Silence the NaNs that may result from half-precision conversion,
as we do for the other conversions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Add a float16 type to softfloat, rather than using bits16 directly.
Also add the missing functions float16_is_quiet_nan(),
float16_is_signaling_nan() and float16_maybe_silence_nan(),
which are needed for the float16 conversion routines.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Fix bit mask used when widening the result of shift on narrow input.
Signed-off-by: Christophe Lyon <christophe.lyon@st.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The returned value when doing saturating signed 64->32 bit
conversion of a negative number was incorrect due to a missing cast.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>