Which allows specification of absolute/relative,
up/down and console parameters.
Suggested by Gerd Hoffman.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
commit 2e377f1730 changed the ordering
of the release events as side effect. Some guests are not happy with
that and don't recognise ctrl-alt-del any more. This patch restores
the old last-pressed first-released behavior.
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add a function to allow display emulations to switch the hwops
function pointers. This is useful for devices which have two
completely different operation modes. Typical case is the vga
compatibility mode vs. native mode in qxl and the upcoming
virtio-vga device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch removes support for the cow file format.
Normally we do not break backwards compatibility but in this case there
is no impact and it is the most logical option. Extraordinary claims
require extraordinary evidence so I will show why removing the cow block
driver is the right thing to do.
The cow file format is the disk image format for Usermode Linux, a way
of running a Linux system in userspace. The performance of UML was
never great and it was hacky, but it enjoyed some popularity before
hardware virtualization support became mainstream.
QEMU's block/cow.c is supposed to read this image file format.
Unfortunately the file format was underspecified:
1. Earlier Linux versions used the MAXPATHLEN constant for the backing
filename field. The value of MAXPATHLEN can change, so Linux
switched to a 4096 literal but QEMU has a 1024 literal.
2. Padding was not used on the header struct (both in the Linux kernel
and in QEMU) so the struct layout varied across architectures. In
particular, i386 and x86_64 were different due to int64_t alignment
differences. Linux now uses __attribute__((packed)), QEMU does not.
Therefore:
1. QEMU cow images do not conform to the Linux cow image file format.
2. cow images cannot be shared between different host architectures.
This means QEMU cow images are useless and QEMU has not had bug reports
from users actually hitting these issues.
Let's get rid of this thing, it serves no purpose and no one will be
affected.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1410877464-20481-1-git-send-email-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
we currently have the Nagle algorithm enabled for all outgoing VNC updates.
This may delay sensitive updates as mouse movements or typing in the console.
As we currently prepare all data in a buffer and then send as much as we can
disabling the Nagle algorithm should not cause big trouble. Well established
VNC servers like TightVNC set TCP_NODELAY as well.
A regular framebuffer update request generates exactly one framebuffer update
which should be pushed out as fast as possible.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
Don't call SPICE API directly to set password given in command line, but
use the internal API, saving password for later calls.
This solves losing password when changing expiration in qemu monitor.
https://bugzilla.redhat.com/show_bug.cgi?id=1138639
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If we need to, we should use the pixman formats instead but for
now this is unused except in commented out code so take it out
to avoid further confusion about surface endianness.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Helper function for copying data from linebuf to framebuffer using
pixman, possibly converting in case src and dst formats differ.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Calls dpy_gfx_update for all dirty scanlines. Works for
DisplaySurfaces backed by guest memory (i.e. the ones created
using qemu_create_displaysurface_guestmem).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch adds a qemu_create_displaysurface_guestmem helper function.
Works simliar to qemu_create_displaysurface_from, but accepts a
guest address instead of a host pointer and it handles
cpu_physical_memory_{map,unmap} for you.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With this patch the qemu console core stops using PixelFormat and pixman
format codes side-by-side, pixman format code is the primary way to
specify the DisplaySurface format:
* DisplaySurface stops carrying a PixelFormat field.
* qemu_create_displaysurface_from() expects a pixman format now.
Functions to convert PixelFormat to pixman_format_code_t (and back)
exist for those who still use PixelFormat. As PixelFormat allows
easy access to masks and shifts it will probably continue to exist.
[ xenfb added by Benjamin Herrenschmidt ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Use the new qemu_pixelformat_from_pixman and qemu_default_pixman_format
functions to reimplement qemu_default_pixelformat
(qemu_different_endianness_pixelformat too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Function to convert pixman format codes to qemu PixelFormat.
[ Benjamin Herrenschmidt: fix BGRA+RGBA shifts ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Related spice-only bug. We have a fixed 16 MB buffer here, being
presented to the spice-server as qxl video memory in case spice is
used with a non-qxl card. It's also used with qxl in vga mode.
When using display resolutions requiring more than 16 MB of memory we
are going to overflow that buffer. In theory the guest can write,
indirectly via spice-server. The spice-server clears the memory after
setting a new video mode though, triggering a segfault in the overflow
case, so qemu crashes before the guest has a chance to do something
evil.
Fix that by switching to dynamic allocation for the buffer.
CVE-2014-3615
Cc: qemu-stable@nongnu.org
Cc: secalert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
We need to remember has_updates for each vnc client. Otherwise it might
happen that vnc_update_client(has_dirty=1) takes the first exit due to
output buffers not being flushed yet and subsequent calls with
has_dirty=0 take the second exit, wrongly assuming there is nothing to
do because the work defered in the first call is ignored.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
If the client asks for !incremental frame updates, it has lost its content
so dirty doesn't matter - it has to see the full frame, so setting force_update
Signed-off-by: Stephan Kulow <coolo@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Peter Lieven <pl@kamp.de>
(Resending for correct email addresses via MAINTAINERS ...)
In the GTK UI, after changing focus to the qemu monitor Notebook Page,
when restoring focus to the virtual machine page, the keyboard focus is lost
to a hidden GTK widget. Focus can only be restored to the virtual machine by
pressing "tab" or any of the four directional arrow keys.
Clicking in the window or grabbing/ungrabbing input does not restore keyboard
focus to the child widget.
This patch adjusts the Notebook page switching callback to automatically
steal keyboard focus on the Page switch event, so that keyboard input
does not appear to break or disappear after tabbing to the QEMU monitor.
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Set auth to sasl when sasl is enabled, this makes "info spice" correctly
display sasl auth. Also throw an error in case someone tries to set
a spice password via monitor without auth mode being "spice".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this patch makes the VNC server work correctly if the
server surface and the guest surface have different sizes.
Basically the server surface is adjusted to not exceed VNC_MAX_WIDTH
x VNC_MAX_HEIGHT and additionally the width is rounded up to multiple of
VNC_DIRTY_PIXELS_PER_BIT.
If we have a resolution whose width is not dividable by VNC_DIRTY_PIXELS_PER_BIT
we now get a small black bar on the right of the screen.
If the surface is too big to fit the limits only the upper left area is shown.
On top of that this fixes 2 memory corruption issues:
The first was actually discovered during playing
around with a Windows 7 vServer. During resolution
change in Windows 7 it happens sometimes that Windows
changes to an intermediate resolution where
server_stride % cmp_bytes != 0 (in vnc_refresh_server_surface).
This happens only if width % VNC_DIRTY_PIXELS_PER_BIT != 0.
The second is a theoretical issue, but is maybe exploitable
by the guest. If for some reason the guest surface size is bigger
than VNC_MAX_WIDTH x VNC_MAX_HEIGHT we end up in severe corruption since
this limit is nowhere enforced.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
currently a malicious client could define a payload
size of 2^32 - 1 bytes and send up to that size of
data to the vnc server. The server would allocated
that amount of memory which could easily create an
out of memory condition.
This patch limits the payload size to 1MB max.
Please note that client_cut_text messages are currently
silently ignored.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Honour the -show-cursor command line option (which forces the mouse pointer
to always be displayed even when input is grabbed) in the Cocoa UI backend.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-5-git-send-email-peter.maydell@linaro.org
Fix handling of absolute positioning devices, which were basically
unusable for two separate reasons:
(1) as soon as you pressed the left mouse button we would call
CGAssociateMouseAndMouseCursorPosition(FALSE), which means that
the absolute coordinates of the mouse events are never updated
(2) we didn't account for MacOSX coordinate origin being bottom left
rather than top right, and so all the Y values sent to the guest
were inverted
We fix (1) by aligning our behaviour with the SDL UI backend for
absolute devices:
* when the mouse moves into the window we do a grab (which means
hiding the host cursor and sending special keys to the guest)
* when the mouse moves out of the window we un-grab
and fix (2) by doing the correct transformation in the call to
qemu_input_queue_abs().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-4-git-send-email-peter.maydell@linaro.org
Add a utility method to check whether a point is within the current window
bounds, and use it in the various places in the mouse handling code that
were opencoding the check.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-3-git-send-email-peter.maydell@linaro.org
Do the recalculation of the content dimensions in switchSurface if the
current cdx is zero as well as if the new surface is a different size to
the current window. This catches the case where the first surface registered
happens to be 640x480 (our current window size), and fixes a bug where we
would always display a black screen until the first surface of a different
size was registered.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1403516125-14568-2-git-send-email-peter.maydell@linaro.org
The next patch will modify this function to initialize state that is
common to all backends.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
SPICE_INITIALIZED, SPICE_CONNECTED, SPICE_DISCONNECTED and
SPICE_MIGRATE_COMPLETED are converted in one patch, since they
use some common functions. inet_strfamily() is removed since no
callers exist anymore.
Note that there is no existing doc for SPICE_MIGRATE_COMPLETED
in docs/qmp/qmp-events.txt before this patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since VNC_CONNECTED, VNC_DISCONNECTED, VNC_INITIALIZED share some
common functions, convert them in one patch.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In order to let event defines use existing types later, instead of
redefine new ones, some old type defines for spice and vnc are changed,
and BlockErrorAction is moved from block.h to qapi schema. Note that
BlockErrorAction is not merged with BlockdevOnError.
At this point, VncInfo is not made a child of VncBasicInfo, because
VncBasicInfo has mandatory fields where VncInfo makes them optional.
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Bug was added by 38ee14f4f3.
vnc_jobs_join call is missing in one code path.
Reported-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
So you'll have a mouse pointer when running non-qxl gfx cards with
mouse pointer support (virtio-gpu, IIRC vmware too).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Make configure detect gtk x11 backend and link libX11 then. Make
gtk backend specific code properly #ifdef'ed on the GTK_WINDOWING_*
backends at runtime). Our gtk ui code should build and run fine on
any platform now.
This also fixes the linker failute due to the new XkbGetKeyboard call
added by commit 3158a3482b.
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Current code silently changes the authentication settings
in case you try to set a password without password authentication
turned on. This is bad. Return an error instead.
If we want allow changing auth settings at runtime this should
be done explicitly using a separate monitor command, not as
side effect of set_passwd.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Add function to bind input devices to display devices. Implementing
input routing on top of this: Events coming from the display device in
question are routed to the input device bound to it (if there is one).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Without the mask, control bits are passed on in the keycode, generating
incorrect PS/2 sequences when SHIFT, ALT, etc are held down.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andrew Oates <andrew@aoates.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Major overhaul for window size handling. This basically switches qemu
over to use geometry hints for the window manager instead of trying to
get the job done with widget resize requests. This allows to specify
better what we need and also avoids window resizes.
FIXME: on gtk2 someone overwrites the geometry hints :(
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently only evdev keycodes are handled by the gtk-ui. SDL has
code to handle both. This patch adds similar processing so that
both keycode types will be handled via the gtk-ui.
Signed-off-by: Bruce Rogers <brogers@suse.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's pointless. With grab on hover enabled the keyboard grab
is already active when you press Ctrl-Alt-G ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
"View->Detach tab" will move to tab to a new window.
Simply closing the window will move it back into a notebook tab.
The label will be permamently stored in VirtualConsole->label,
so it can easily be reused to (re-)label tabs and windows.
Works for vte tabs only for now. pointer/kbd grab code needs
adaptions before we can enable it for gfx tabs too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simply ask for a small window size. When the widgets don't fit in gtk
will automatically make the window large enougth to make things fit, no
need to try (and fail) duplicate that logic in qemu.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Each display gets its own tab. Tab switching continues to work like it
did, just the hotkeys of the vte consoles changes in case a secondary
display is present as it will get ctrl-alt-2 assigned and the vtes are
shifted by one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Only show the scrollbar if the content doesn't fit on the visible space.
[ kraxel: fix box packing ]
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vte tabs simply get the size of the vga tab then, with whatever
cols and lines are fitting in. I find this bahavior more useful than
resizing the qemu window all day long.
YMMV. Comments are welcome.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The vte widget implements the scrollable interface, placing it into
a scrolled window is pointless and creates a bunch of strange effects.
Zap it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Have a global timer. Update all visible terminal windows syncronously.
Right now this can be the active_console only, but that will change
soon. The global timer will disable itself if not needed, so we only
have to care start it if needed. Which might be at console switch time
or when a new displaychangelistener is registered.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These days each QemuConsole has its own private DisplaySurface,
so we can simply render updates all the time.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Now that we have a function to create a fancy DisplaySurface with a
message for the user, to handle non-existing graphics hardware, we
can make it more generic and use it for other things too.
This patch adds a text line to the in initial DisplaySurface, notifying
the user that the display isn't initialized yet by the guest.
You can see this in action when starting qemu with '-S'. Also when
booting ovmf in qemu (which needs a few moments to initialize itself
before it initializes the vga).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
All defined properties of QemuConsole are mandatory and no access to them
should fail. Nevertheless not checking returned errors is bad because in case
of unexpected failure it will hide the bug and cause a memory leak.
Abort in case of unexpected property access errors. This change exposed a bug
where an attempt was made to write to a read-only property "head".
Set "head" property's value at creation time and do not attempt to change it
later. This fixes the bug mentioned above.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With sparc keyboard going directly from QKeyValue to sparc keycodes
this should not be needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Current Makefile system allows using foo.o-cflags variables to store
object-specific CFLAGS. Convert some usages of old syntax
(using QEMU_CFLAGS += construct) to the new syntax.
Do not touch multifile modules for now, as build system isn't ready for this.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Only notify spice-server about migration events in case we got
target host information beforehand. So we kick the seamless spice
client migration only in case a actual live migration happens, not
when libvirt uses live-migration-to-file for snapshotting.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In case no listening address was specified, "info spice" reports
"0.0.0.0" as address. Which is incorrect in case spice is listening
on ipv6. Replace it by a wildcard "*" to indicate it is not limited
to a specific address.
Note: Being more specific is not possible without extending the
spice-server api. The socket is handled by spice-server not
qemu, so qemu can't easily figure the actual socket address.
Reported-by: David Jaša <djasa@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There was already a forward declaration using 'static',
but the attribute was missing in the implementation.
This fixes a warning from the static code analysis (smatch).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In SDL2, wheel movement is its own event, not a button event. Wire
it up similar to gtk.c
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Allows you to resize the sdl2 window and have the guest notice.
[ kraxel: zero-initialize QemuUIInfo ]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When keyboard focus is grabbed, current qemu wants to pass every
keypress to the VM, unless the user is pressing a UI accelerator.
That's exactly how things work without any of the fancy handling. Drop
the special handling, which seems to trigger accelerators twice on gtk3.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Try kicking off a rhel5 text install over serial, the text menu navigation
is all messed up, and some of the kernel boot messages are randomly
corrupted.
Drop use of a pty and just use vte infrastructure for reading and writing.
This fixes the above corruption, and is simpler to boot.
(I don't know what was wrong with the original code though. FWIW this is
what virt-manager has done for years).
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using the standard ctrl+q makes it too easy to kill the whole VM. Using
ctrl+alt+FOO is consistent with our other accelerators.
https://bugzilla.redhat.com/show_bug.cgi?id=1062393
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Stock items are deprecated. As are ImageMenuItems. Convert everything to
text only MenuItems, with the same text content as mentioned in the
conversion guide:
https://docs.google.com/spreadsheet/pub?key=0AsPAM3pPwxagdGF4THNMMUpjUW5xMXZfdUNzMXhEa2c&output=html
gtk2 users lose their menu icons as well, but I don't think that's enough
of a problem to warrant keeping around back compat code.
Example error:
ui/gtk.c:1328:5: error: ‘GtkStock’ is deprecated [-Werror=deprecated-declarations]
ui/gtk.c:1335:5: error: ‘gtk_image_menu_item_new_from_stock’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:78): Use 'gtk_menu_item_new' instead [-Werror=deprecated-declarations]
s->zoom_out_item = gtk_image_menu_item_new_from_stock(GTK_STOCK_ZOOM_OUT, NULL);
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Guard this with a VTE version check, since I'm not sure if this is backwards
compatible.
ui/gtk.c: In function ‘gd_vc_init’:
ui/gtk.c:1176:5: error: ‘vte_terminal_get_adjustment’ is deprecated (declared at /usr/include/vte-2.90/vte/vtedeprecated.h:101) [-Werror=deprecated-declarations]
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In these cases we weren't using an image in the menu item anyways, so
just do as the suggestion says. Should be fine for all qemu supported
gtk versions.
ui/gtk.c: In function ‘gd_create_menu_machine’:
ui/gtk.c:1284:5: error: ‘gtk_image_menu_item_new_with_mnemonic’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:76): Use 'gtk_menu_item_new_with_mnemonic' instead [-Werror=deprecated-declarations]
s->reset_item = gtk_image_menu_item_new_with_mnemonic(_("_Reset"));
^
ui/gtk.c:1287:5: error: ‘gtk_image_menu_item_new_with_mnemonic’ is deprecated (declared at /usr/include/gtk-3.0/gtk/deprecated/gtkimagemenuitem.h:76): Use 'gtk_menu_item_new_with_mnemonic' instead [-Werror=deprecated-declarations]
s->powerdown_item = gtk_image_menu_item_new_with_mnemonic(_("Power _Down"));
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These errors don't seem user initiated, so forcibly printing to the
monitor doesn't seem right. Just use error_report.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Right now relative mode accelerates too fast, and has the 'invisible wall'
problem. SDL2 added an explicit API to handle this use case, so let's use
it.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Unbreaks relative mouse mode with sdl2, just like was done with sdl.c
in c3aa84b6.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch changes the behavior in the relative mode to be compatible
with other UIs, namely, grabbing the input at the first left click.
It improves the usability a lot; otherwise you have to press ctl-alt-G
or select from menu at each time you want to move the pointer. Also,
the input grab is cleared when the current mode is switched to the
absolute mode.
The automatic reset of the implicit grabbing is needed since the
switching to the absolute mode happens always after the click even on
Gtk. That is, we cannot check whether the absolute mode is already
available at the first click time even though it should have been
switched in X11 input driver side.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
It's pretty annoying that the pointer reappears at a random place once
after grabbing and ungrabbing the input. Better to restore to the
original position where the pointer was grabbed.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The relative pointer tracking mode was still buggy even after the
previous fix of the motion-notify-event since the events are filtered
out when the pointer moves outside the drawing window due to the
boundary check for the absolute mode.
This patch fixes the issue by moving the unnecessary boundary check
into the if block of absolute mode, and keep the coordinate in the
relative mode even if it's outside the drawing area. But this makes
the coordinate (last_x, last_y) possibly pointing to (-1,-1),
introduce a new flag to indicate the last coordinate has been
updated.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The GDK motion-notify-event isn't generated when the pointer goes out
of the target window even if the pointer is grabbed, which essentially
means to lose the pointer tracking in gtk-ui.
Meanwhile the generic "event" signal is sent when the pointer is
grabbed, so we can use this and pick the motion notify events manually
there instead.
Reference: https://bugzilla.novell.com/show_bug.cgi?id=849587
Tested-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Cole Robinson <crobinso@redhat.com>
Tested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Otherwise, the index of an input device like a usb-kbd is silently accepted.
(qemu) info mice
Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
(qemu) mouse_set 1
(qemu) info mice
Mouse #2: QEMU PS/2 Mouse
* Mouse #3: QEMU HID Mouse
Also replace monitor_printf() call in do_mouse_set() with error_report() and
adjust error message.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK without VTE is needed for hosts which don't support VTE (for example
all variants of MinGW), but it can also be reasonable for other hosts.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Current tablet + spice is unusable. Regressed with the UI input rework.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
There are currently three types of object_property_add_link() callers:
1. The link property may be set at any time.
2. The link property of a DeviceState instance may only be set before
realize.
3. The link property may never be set, it is read-only.
Something similar can already be achieved with
object_property_add_str()'s set() argument. Follow its example and add
a check() argument to object_property_add_link().
Also provide default check() functions for case #1 and #2. Case #3 is
covered by passing a NULL function pointer.
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
[AF: Tweaked documentation comment]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Some object_property_add_link() callers expect property deletion to
unref the link property object. Other callers expect to manage the
refcount themselves. The former are currently broken and therefore leak
the link property object.
This patch adds a flags argument to object_property_add_link() so the
caller can specify which refcount behavior they require. The new
OBJ_PROP_LINK_UNREF_ON_RELEASE flag causes the link pointer to be
unreferenced when the property is deleted.
This fixes refcount leaks in qdev.c, xilinx_axidma.c, xilinx_axienet.c,
s390-virtio-bus.c, virtio-pci.c, virtio-rng.c, and ui/console.c.
Rationale for refcount behavior:
* hw/core/qdev.c
- bus children are explicitly unreferenced, don't interfere
- parent_bus is essentially a read-only property that doesn't hold a
refcount, don't unref
- hotplug_handler is leaked, do unref
* hw/dma/xilinx_axidma.c
- rx stream "dma" links are set using set_link, therefore they
need unref
- tx streams are set using set_link, therefore they need unref
* hw/net/xilinx_axienet.c
- same reasoning as hw/dma/xilinx_axidma.c
* hw/pcmcia/pxa2xx.c
- pxa2xx bypasses set_link and therefore does not use refcounts
* hw/s390x/s390-virtio-bus.c
* hw/virtio/virtio-pci.c
* hw/virtio/virtio-rng.c
* ui/console.c
- set_link is used and there is no explicit unref, do unref
Cc: Peter Crosthwaite <peter.crosthwaite@petalogix.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
this fixes invalid rectangle updates observed after commit 12b316d
with the vmware VGA driver. The issues occured because the server
and client surface update seems to be out of sync at some points
and the max width of the surface is not dividable by
VNC_DIRTY_BITS_PER_PIXEL (16).
Reported-by: Serge Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This matches the behavior of SDL, and makes the mouse usable when
using -display gtk -vga qxl
https://bugzilla.redhat.com/show_bug.cgi?id=1051724
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
We were using the wrong coordinates, this fixes things to match the
original gtk2 implementation.
You can see this error in action by using -vga qxl, however even after this
patch the mouse warps in small increments up and to the left, -7x and -3y
pixels at a time, until the pointer is warped off the widget. I think it's
a qxl bug, but the next patch covers it up.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
As long as we have no persistent GTK configuration, this allows to
enable the useful grab-on-hover feature already when starting the VM.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
[ kraxel: fix warning with CONFIG_GTK=n ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hook into scroll-event to properly forward mouse wheel movements to the
guest, just like we already do in SDL.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Restores traditional behavior: Keyboard input will be routed to the most
recently added keyboard. Without this all kbd input goes to the ps/2
keyboard, even if you add a usb keyboard to your guest.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
- vnc_update_client_new2: 0.29 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.07 secs
- vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
vnc_update_client_new2 shows the performance of vnc_update_client
with this patch added.
Comparing with the test run of the last patch the performance
is at least unchanged while it is significantly improved
for the all bits dirty case.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_update_client currently scans the dirty bitmap of each client
bitwise which is a very costly operation if only few bits are dirty.
vnc_refresh_server_surface does almost the same.
this patch optimizes both by utilizing the heavily optimized
function find_next_bit to find the offset of the next dirty
bit in the dirty bitmaps.
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.08 secs
vnc_update_client_old: 10.98 secs
The case for all bits dirty is still rather slow, this
is due to the implementation of find_and_clear_dirty_height.
This will be addresses in a separate patch.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this allows for setting VNC_DIRTY_PIXELS_PER_BIT to different
values than 16 if desired.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>