The SRST protocol states that after diagnostics are complete and the
status is posted, we should clear the SRST bit if it should so happen to
be set.
The reset method itself should handle this, but just in case -- make our
intention explicit here.
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20201020200242.1497705-4-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
We don't need to wait for the falling edge. We can set BSY as
soon as possible and begin immediately resetting the drive. Devices
don't appear to need to take any specific action on the falling edge.
Signed-off-by: John Snow <jsnow@redhat.com>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-id: 20201020200242.1497705-3-jsnow@redhat.com
Signed-off-by: John Snow <jsnow@redhat.com>
Software reset (SRST) should cause the diagnostic command to be run. Make an
explicit call to that routine.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 20201020200242.1497705-2-jsnow@redhat.com
Fixes: 55adb3c456
Fixes: https://bugs.launchpad.net/bugs/1900155
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: John Snow <jsnow@redhat.com>
* Fix for Xen dummy cpu loop (which happened due to qtest accel rework)
* Introduction of the generic device fuzzer
* Run more check-acceptance tests in the gitlab-CI
-----BEGIN PGP SIGNATURE-----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=ZpMy
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/huth-gitlab/tags/pull-request-2020-10-26' into staging
* qtest fixes (e.g. memory leaks)
* Fix for Xen dummy cpu loop (which happened due to qtest accel rework)
* Introduction of the generic device fuzzer
* Run more check-acceptance tests in the gitlab-CI
# gpg: Signature made Mon 26 Oct 2020 09:34:04 GMT
# gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5
# gpg: issuer "thuth@redhat.com"
# gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full]
# gpg: aka "Thomas Huth <thuth@redhat.com>" [full]
# gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full]
# gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown]
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth-gitlab/tags/pull-request-2020-10-26: (31 commits)
tests/acceptance: Use .ppm extention for Portable PixMap files
tests/acceptance: Remove unused import
test/docker/dockerfiles: Add missing packages for acceptance tests
tests/acceptance: Enable AVOCADO_ALLOW_UNTRUSTED_CODE in the gitlab-CI
test/acceptance: Remove the CONTINUOUS_INTEGRATION tags
tests/acceptance/ppc_prep_40p: Fix the URL to the NetBSD-4.0 archive
scripts/oss-fuzz: ignore the generic-fuzz target
scripts/oss-fuzz: use hardlinks instead of copying
fuzz: register predefined generic-fuzz configs
fuzz: add generic-fuzz configs for oss-fuzz
fuzz: add an "opaque" to the FuzzTarget struct
fuzz: Add instructions for using generic-fuzz
scripts/oss-fuzz: Add crash trace minimization script
scripts/oss-fuzz: Add script to reorder a generic-fuzzer trace
fuzz: add a crossover function to generic-fuzzer
fuzz: add a DISABLE_PCI op to generic-fuzzer
fuzz: Add support for custom crossover functions
fuzz: Add fuzzer callbacks to DMA-read functions
fuzz: Declare DMA Read callback function
fuzz: Add DMA support to the generic-fuzzer
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This includes:
- Improvements to logging output
- Hypervisor instruction fixups
- The ability to load a noMMU kernel
- SiFive OTP support
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAl+S8zUACgkQIeENKd+X
cFR79wf/UjQulwFofCgOh8Fsrh5tlbRVYSXEHCWkEg6V8yfA+WYkkup94wBJK0V6
tJglht7v8aovUFWRyEL+yB+zXmT88ZugW20D3NtP5aaTTuPWij2qlYDTJQK9FGEf
1rW5mFZ4VkULEEHeO6MoJ/0t50Cs4ViA//Qz6Un4Z+zVqYjkItT5NNYx9j+czLIJ
KBre/ziJXu8yIxYaxqy4Lb4IepVL5T9/pjIw5nbNbWE+DfnfqiUPVifXx73gFRPZ
zRfgDD+Dbn/bbmDl137PkpPa2hk5CNUAL8/9rEhnjji2Lrb6SH+gFc0GvnZk7DJm
duKXhegU/ATZlI+1bLqL1D1z8Do6qQ==
=H9Qu
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/alistair/tags/pull-riscv-to-apply-20201023' into staging
A collection of RISC-V fixes for the next QEMU release.
This includes:
- Improvements to logging output
- Hypervisor instruction fixups
- The ability to load a noMMU kernel
- SiFive OTP support
# gpg: Signature made Fri 23 Oct 2020 16:13:57 BST
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full]
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* remotes/alistair/tags/pull-riscv-to-apply-20201023:
hw/misc/sifive_u_otp: Add backend drive support
hw/misc/sifive_u_otp: Add write function and write-once protection
target/riscv: raise exception to HS-mode at get_physical_address
hw/riscv: Load the kernel after the firmware
hw/riscv: Add a riscv_is_32_bit() function
hw/riscv: Return the end address of the loaded firmware
hw/riscv: sifive_u: Allow specifying the CPU
target/riscv: Fix implementation of HLVX.WU instruction
target/riscv: Fix update of hstatus.GVA in riscv_cpu_do_interrupt
target/riscv: Fix update of hstatus.SPVP
hw/intc: Move sifive_plic.h to the include directory
riscv: Convert interrupt logs to use qemu_log_mask()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Initialize the object's values from the class when the object is
created, no need to have vl.c do it for us.
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up vl.c, default min/max/default_cpus to uniprocessor
directly in the QOM class initialization code.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With upstream commit#ea1edcd7da1a "vl: relocate paths to data
directories", the data dir logic was unified between POSIX &
Win32. That patch moved to using 'get_relocated_path()', to
find the data dir. There is a latent bug in get_relocated_path
which can cause it to spin indefinitely, when the bind dir is
the same as the passed in dir (in this case, it was the data
dir).
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB08802BF242C429A15DDB32ACC01B0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With upstream commit#8a19980e3fc4, logic was introduced to only
allow WHPX build on x64. But, the logic checks for the cpu family
and not the cpu. On my fedora container build, the cpu family is
x86 and the cpu is x86_64. Fixing the build break by checking for
the cpu, instead of the cpu family.
Signed-off-by: Sunil Muthuswamy <sunilmut@microsoft.com>
Message-Id: <SN4PR2101MB0880D706A85793DDFC411304C01D0@SN4PR2101MB0880.namprd21.prod.outlook.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since installation is not part of Makefiles anymore, Make need not
know the directories anymore. Meson already knows them through
built-in options, do everything using them instead of the config_host
dictionary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson has a localedir option, so passing the path through that option
is the cleanest way when we move directories out of config-host.mak.
In preparation for doing that without changing semantics and without
special-casing localedir code, add a configure option.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The rules to build Makefile.mtest are suffering from the "tunnel vision"
problem that is common with recursive makefiles. Makefile.mtest depends
on build.ninja, but Make does not know when build.ninja needs to be
rebuilt before creating Makefile.mtest.
To fix this, separate the ninja invocation into the "regenerate build
files" phase and the QEMU build phase. Sentinel files such as
meson-private/coredata.dat or build.ninja are used to figure out the
phases that haven't run yet; however, because those files' timestamps
are not guaranteed to be touched, the usual makefile stamp-file trick
is used on top.
Reported-by: Havard Skinnemoen <hskinnemoen@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The HMP 'screendump' command generates Portable PixMap files.
Make it obvious by using the .ppm file extention.
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201021105035.2477784-3-f4bug@amsat.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20201021105035.2477784-2-f4bug@amsat.org>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some of the "check-acceptance" tests are still skipped in the CI
since the docker images do not provide the necessary packages, e.g.
the netcat binary. Add them to get more test coverage.
Message-Id: <20201023073351.251332-5-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The tests are running in containers here, so it should be OK to
run with AVOCADO_ALLOW_UNTRUSTED_CODE enabled in this case.
Message-Id: <20201023073351.251332-4-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We are not running the acceptance tests on Travis anymore, so these
checks can be removed now.
Message-Id: <20201023073351.251332-3-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The current URL on cdn.netbsd.org is failing - using archive.netbsd.org
instead seems to be fine.
Message-Id: <20201023073351.251332-2-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
generic-fuzz is not a standalone fuzzer - it requires some env variables
to be set. On oss-fuzz, we set these with some predefined
generic-fuzz-{...} targets, that are thin wrappers around generic-fuzz.
Do not make a link for the generic-fuzz from the oss-fuzz build, so
oss-fuzz does not treat it as a standalone fuzzer.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-18-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
[thuth: Reformatted one comment to stay within the 80 columns limit]
Signed-off-by: Thomas Huth <thuth@redhat.com>
Prior to this, fuzzers in the output oss-fuzz directory were exactly
the same executable, with a different name to do argv[0]-based
fuzz-target selection. This is a waste of space, especially since these
binaries can weigh many MB.
Instead of copying, use hard links, to cut down on wasted space. We need
to place the primary copy of the executable into DEST_DIR, since this is
a separate file-system on oss-fuzz. We should not place it directly into
$DEST_DIR, since oss-fuzz will treat it as an independent fuzzer and try
to run it for fuzzing. Instead, we create a DEST_DIR/bin directory to
store the primary copy.
Suggested-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-17-alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We call get_generic_fuzz_configs, which fills an array with
predefined {name, args, objects} triples. For each of these, we add a
new FuzzTarget, that uses a small wrapper to set
QEMU_FUZZ_{ARGS,OBJECTS} to the corresponding predefined values.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-16-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Predefine some generic-fuzz configs. For each of these, we will create a
separate FuzzTarget that can be selected through argv0 and, therefore,
fuzzed on oss-fuzz.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-15-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It can be useful to register FuzzTargets that have nearly-identical
initialization handlers (e.g. for using the same fuzzing code, with
different configuration options). Add an opaque pointer to the
FuzzTarget struct, so that FuzzTargets can hold some data, useful for
storing target-specific configuration options, that can be read by the
get_init_cmdline function.
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-14-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-13-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Once we find a crash, we can convert it into a QTest trace. Usually this
trace will contain many operations that are unneeded to reproduce the
crash. This script tries to minimize the crashing trace, by removing
operations and trimming QTest bufwrite(write addr len data...) commands.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-12-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The generic-fuzzer uses hooks to fulfill DMA requests just-in-time.
This means that if we try to use QTEST_LOG=1 to build a reproducer, the
DMA writes will be logged _after_ the in/out/read/write that triggered
the DMA read. To work work around this, the generic-fuzzer annotates
these just-in time DMA fulfilments with a tag that we can use to
discern them. This script simply iterates over a raw qtest
trace (including log messages, errors, timestamps etc), filters it and
re-orders it so that DMA fulfillments are placed directly _before_ the
qtest command that will cause the DMA access.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-11-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-10-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This new operation is used in the next commit, which concatenates two
fuzzer-generated inputs. With this operation, we can prevent the second
input from clobbering the PCI configuration performed by the first.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-9-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
libfuzzer supports a "custom crossover function". Libfuzzer often tries
to blend two inputs to create a new interesting input. Sometimes, we
have a better idea about how to blend inputs together. This change
allows fuzzers to specify a custom function for blending two inputs
together.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-8-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We should be careful to not call any functions besides fuzz_dma_read_cb.
Without --enable-fuzzing, fuzz_dma_read_cb is an empty inlined function.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-7-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch declares the fuzz_dma_read_cb function and uses the
preprocessor and linker(weak symbols) to handle these cases:
When we build softmmu/all with --enable-fuzzing, there should be no
strong symbol defined for fuzz_dma_read_cb, and we link against a weak
stub function.
When we build softmmu/fuzz with --enable-fuzzing, we link against the
strong symbol in generic_fuzz.c
When we build softmmu/all without --enable-fuzzing, fuzz_dma_read_cb is
an empty, inlined function. As long as we don't call any other functions
when building the arguments, there should be no overhead.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-6-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
When a virtual-device tries to access some buffer in memory over DMA, we
add call-backs into the fuzzer(next commit). The fuzzer checks verifies
that the DMA request maps to a physical RAM address and fills the memory
with fuzzer-provided data. The patterns that we use to fill this memory
are specified using add_dma_pattern and clear_dma_patterns operations.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-5-alxndr@bu.edu>
[thuth: Reformatted one comment according to the QEMU coding style]
Signed-off-by: Thomas Huth <thuth@redhat.com>
This patch compares TYPE_PCI_DEVICE objects against the user-provided
matching pattern. If there is a match, we use some hacks and leverage
QOS to map each possible BAR for that device. Now fuzzed inputs might be
converted to pci_read/write commands which target specific. This means
that we can fuzz a particular device's PCI configuration space,
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Message-Id: <20201023150746.107063-4-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This is a generic fuzzer designed to fuzz a virtual device's
MemoryRegions, as long as they exist within the Memory or Port IO (if it
exists) AddressSpaces. The fuzzer's input is interpreted into a sequence
of qtest commands (outb, readw, etc). The interpreted commands are
separated by a magic seaparator, which should be easy for the fuzzer to
guess. Without ASan, the separator can be specified as a "dictionary
value" using the -dict argument (see libFuzzer documentation).
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-3-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Message-Id: <20201023150746.107063-2-alxndr@bu.edu>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The g_list_remove_link doesn't free the link element,
opposed to what I thought.
Switch to g_list_delete_link that does free it.
Also refactor the code a bit.
Thanks for Max Reitz for helping me with this.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201019163702.471239-4-mlevitsk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
By a mistake I added the pending events in a wrong order.
Fix this by using g_list_append.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20201019163702.471239-3-mlevitsk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
This test won't work if qemu was compiled without CONFIG_NPCM7XX, as
pointed out by Thomas Huth on a different patch.
Signed-off-by: Havard Skinnemoen <hskinnemoen@google.com>
Message-Id: <20201023210637.351238-2-hskinnemoen@google.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Xen was broken by commit 1583a38988 ("cpus: extract out qtest-specific
code to accel/qtest"). Xen relied on qemu_init_vcpu() calling
qemu_dummy_start_vcpu() in the default case, but that was replaced by
g_assert_not_reached().
Add a minimal "CpusAccel" for Xen using the dummy-cpus implementation
used by qtest.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <20201013140511.5681-4-jandryuk@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Move and rename accel/qtest/qtest-cpus.c files to accel/dummy-cpus.c so
it can be re-used by Xen.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <20201013140511.5681-3-jandryuk@gmail.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
dummy-cpus.c is only compiled with CONFIG_POSIX, so the _WIN32 condition
will never evaluate true. Remove it.
Signed-off-by: Jason Andryuk <jandryuk@gmail.com>
Message-Id: <20201013140511.5681-2-jandryuk@gmail.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Claudio Fontana <cfontana@suse.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The qtests can be run directly by specifying the QEMU binary with the
QTEST_QEMU_BINARY environment variable, for example:
$ QTEST_QEMU_BINARY=x86_64-softmmu/qemu-system-x86_64 tests/qtest/test-hmp
However, if you specify a binary without a path, for example with
QTEST_QEMU_BINARY=qemu-system-x86_64 if the QEMU binary is in your
$PATH, then the test currently simply crashes.
Let's try a little bit smarter here by looking for the final '-'
instead of the slash.
Message-Id: <20201012114816.43546-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These cases are fixed by previous patches around block_status and
is_allocated.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 20200924194003.22080-6-vsementsov@virtuozzo.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>