As part of converting -smp to a property with a QAPI type, define
the struct and use it to do the actual parsing. machine_smp_parse
takes care of doing the QemuOpts->QAPI conversion by hand, for now.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-10-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Clean up the smp_parse functions to use Error** instead of exiting.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-9-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Most of smp_parse and pc_smp_parse is guarded by an "if (opts)"
conditional, and the rest is common to both function. Move the
conditional and the common code to the caller, machine_smp_parse.
Move the replay_add_blocker call after all errors are checked for.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-8-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to make SMP configuration a Machine property, we need a getter as
well as a setter. To simplify the implementation put everything that the
getter needs in the CpuTopology struct.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210617155308.928754-7-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Similar to other handle_aiocb_* functions, handle_aiocb_ioctl needs to cater
for the possibility that ioctl is interrupted by a signal. Otherwise, the
I/O is incorrectly reported as a failure to the guest.
Reported-by: Gordon Watson <gwatson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
iOS hosts do not have these defined so we fallback to the
default behaviour.
Co-authored-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Try all the possible ioctls for disk size as long as they are
supported, to keep the #if ladder simple.
Extracted and cleaned up from a patch by Joelle van Dyne and
Warner Losh.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Some BSD platforms do not have this header.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-3-j@getutm.app>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On Darwin (iOS), there are no system level APIs for directly accessing
host block devices. We detect this at configure time.
Signed-off-by: Joelle van Dyne <j@getutm.app>
Message-Id: <20210315180341.31638-2-j@getutm.app>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
bs->sg is only true for character devices, but block devices can also
be used with scsi-block and scsi-generic. Unfortunately BLKSECTGET
returns bytes in an int for /dev/sgN devices, and sectors in a short
for block devices, so account for that in the code.
The maximum transfer also need not be a power of 2 (for example I have
seen disks with 1280 KiB maximum transfer) so there's no need to pass
the result through pow2floor.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
For block host devices, I/O can happen through either the kernel file
descriptor I/O system calls (preadv/pwritev, io_submit, io_uring)
or the SCSI passthrough ioctl SG_IO.
In the latter case, the size of each transfer can be limited by the
HBA, while for file descriptor I/O the kernel is able to split and
merge I/O in smaller pieces as needed. Applying the HBA limits to
file descriptor I/O results in more system calls and suboptimal
performance, so this patch splits the max_transfer limit in two:
max_transfer remains valid and is used in general, while max_hw_transfer
is limited to the maximum hardware size. max_hw_transfer can then be
included by the scsi-generic driver in the block limits page, to ensure
that the stricter hardware limit is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Block device requests must be aligned to bs->bl.request_alignment.
It makes sense for drivers to align bs->bl.max_transfer the same
way; however when there is no specified limit, blk_get_max_transfer
just returns INT_MAX. Since the contract of the function does not
specify that INT_MAX means "no maximum", just align the outcome
of the function (whether INT_MAX or bs->bl.max_transfer) before
returning it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
osdep.h provides a ROUND_UP macro to hide bitwise operations for the
purpose of rounding a number up to a power of two; add a ROUND_DOWN
macro that does the same with truncation towards zero.
While at it, change the formatting of some comments.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I/O to a disk via read/write is not limited by the number of segments allowed
by the host adapter; the kernel can split requests if needed, and the limit
imposed by the host adapter can be very low (256k or so) to avoid that SG_IO
returns EINVAL if memory is heavily fragmented.
Since this value is only interesting for SG_IO-based I/O, do not include
it in the max_transfer and only take it into account when patching the
block limits VPD page in the scsi-generic device.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Even though it was only called for devices that have bs->sg set (which
must be character devices), sg_get_max_segments looked at /sys/dev/block
which only works for block devices.
On Linux the sg driver has its own way to provide the maximum number of
iovecs in a scatter/gather list, so add support for it. The block device
path is kept because it will be reinstated in the next patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Found this when I wanted to try the per-vcpu dirty rate series out, then I
found that it's not really working and it can quickly hang death a guest. I
found strange errors (e.g. guest crash after migration) happens even without
the per-vcpu dirty rate series.
When merging dirty ring, probably no one notice that the trivial renaming diff
[1] missed two existing references of kvm_dirty_ring_sizes; they do matter
since otherwise we'll mmap() a shorter range of memory after the renaming.
I think it didn't SIGBUS for me easily simply because some other stuff within
qemu mmap()ed right after the dirty rings (e.g. when testing 4096 slots, it
aligned with one small page on x86), so when we access the rings we've been
reading/writting to random memory elsewhere of qemu.
Fix the two sizes when map/unmap the shared dirty gfn memory.
[1] https://lore.kernel.org/qemu-devel/dac5f0c6-1bca-3daf-e5d2-6451dbbaca93@redhat.com/
Cc: Hyman Huang <huangy81@chinatelecom.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210609014355.217110-1-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Make it depend on gnutls too, since it is only used as part of gnutls
tests.
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
meson.build already decides whether it is possible to build the TLS
test suite. There is no need to include that in the source as well.
The dummy tests in fact are broken because they do not produce valid
TAP output (empty output is rejected by scripts/tap-driver.pl).
Cc: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Meson is more verbose than the configure script; the outcome of the preadv test
can be found in its output and it is not worth including it again in the summary.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All XTS configuration uses qemu_private_xts. Drop other variables as
they have only ever been used to generate the summary (which has since
been moved to meson.build).
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
CONFIG_GCRYPT_HMAC has been removed now that all supported distros have it.
Reviewed-by: Richard Henderson <richard.henderson@liaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux 5.14 will add support for nested TSC scaling. Add the
corresponding feature in QEMU; to keep support for existing kernels,
do not add it to any processor yet.
The handling of the VMCS enumeration MSR is ugly; once we have more than
one case, we may want to add a table to check VMX features against.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This adds the target guide for BBC Micro:bit.
Information is taken from https://wiki.qemu.org/Features/MicroBit
and from hw/arm/nrf51_soc.c.
Signed-off-by: Alexandre Iooss <erdnaxe@crans.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 20210621075625.540471-1-erdnaxe@crans.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
MTE3 introduces an asymmetric tag checking mode, in which loads are
checked synchronously and stores are checked asynchronously. Add
support for it.
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210616195614.11785-1-pcc@google.com
[PMM: Add line to emulation.rst]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In a CPU with MVE, the VMOV (vector lane to general-purpose register)
and VMOV (general-purpose register to vector lane) insns are not
predicated, but they are subject to beatwise execution if they
are not in an IT block.
Since our implementation always executes all 4 beats in one tick,
this means only that we need to handle PSR.ECI:
* we must do the usual check for bad ECI state
* we must advance ECI state if the insn succeeds
* if ECI says we should not be executing the beat corresponding
to the lane of the vector register being accessed then we
should skip performing the move
Note that if PSR.ECI is non-zero then we cannot be in an IT block.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-45-peter.maydell@linaro.org
Implement the MVE VADDV insn, which performs an addition
across vector lanes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-44-peter.maydell@linaro.org
Implement the MVE VHCADD insn, which is similar to VCADD
but performs a halving step. This one overlaps with VADC.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-43-peter.maydell@linaro.org
Implement the MVE VCADD insn, which performs a complex add with
rotate. Note that the size=0b11 encoding is VSBC.
The architecture grants some leeway for the "destination and Vm
source overlap" case for the size MO_32 case, but we choose not to
make use of it, instead always calculating all 16 bytes worth of
results before setting the destination register.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-42-peter.maydell@linaro.org
Implement the MVE VADC and VSBC insns. These perform an
add-with-carry or subtract-with-carry of the 32-bit elements in each
lane of the input vectors, where the carry-out of each add is the
carry-in of the next. The initial carry input is either 1 or is from
FPSCR.C; the carry out at the end is written back to FPSCR.C.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-41-peter.maydell@linaro.org
Implement the MVE VRHADD insn, which performs a rounded halving
addition.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-40-peter.maydell@linaro.org
Implement the vector form of the MVE VQDMULL insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-39-peter.maydell@linaro.org
Implement the MVE VQDMLSDH and VQRDMLSDH insns, which are
like VQDMLADH and VQRDMLADH except that products are subtracted
rather than added.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-38-peter.maydell@linaro.org
Implement the MVE VQDMLADH and VQRDMLADH insns. These multiply
elements, and then add pairs of products, double, possibly round,
saturate and return the high half of the result.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-37-peter.maydell@linaro.org
Implement the MV VQRSHL (vector) insn. Again, the code to perform
the actual shifts is borrowed from neon_helper.c.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-34-peter.maydell@linaro.org
Implement the MVE VQSHL insn (encoding T4, which is the
vector-shift-by-vector version).
The DO_SQSHL_OP and DO_UQSHL_OP macros here are derived from
the neon_helper.c code for qshl_u{8,16,32} and qshl_s{8,16,32}.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-33-peter.maydell@linaro.org
Implement the vector forms of the MVE VQADD and VQSUB insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-32-peter.maydell@linaro.org
Implement the vector forms of the MVE VQDMULH and VQRDMULH insns.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-31-peter.maydell@linaro.org
Implement the MVE VQDMULL scalar insn. This multiplies the top or
bottom half of each element by the scalar, doubles and saturates
to a double-width result.
Note that this encoding overlaps with VQADD and VQSUB; it uses
what in VQADD and VQSUB would be the 'size=0b11' encoding.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-30-peter.maydell@linaro.org
Implement the MVE VQDMULH and VQRDMULH scalar insns, which multiply
elements by the scalar, double, possibly round, take the high half
and saturate.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-29-peter.maydell@linaro.org
Implement the MVE VQADD and VQSUB insns, which perform saturating
addition of a scalar to each element. Note that individual bytes of
each result element are used or discarded according to the predicate
mask, but FPSCR.QC is only set if the predicate mask for the lowest
byte of the element is set.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-28-peter.maydell@linaro.org
Implement the MVE VPST insn, which sets the predicate mask
fields in the VPR to the immediate value encoded in the insn.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-27-peter.maydell@linaro.org
Implement the MVE VBRSR insn, which reverses a specified
number of bits in each element, setting the rest to zero.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210617121628.20116-26-peter.maydell@linaro.org