The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
- vnc_update_client_new2: 0.29 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.07 secs
- vnc_update_client_new2: 0.07 secs
vnc_update_client_old: 10.98 secs
vnc_update_client_new2 shows the performance of vnc_update_client
with this patch added.
Comparing with the test run of the last patch the performance
is at least unchanged while it is significantly improved
for the all bits dirty case.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
vnc_update_client currently scans the dirty bitmap of each client
bitwise which is a very costly operation if only few bits are dirty.
vnc_refresh_server_surface does almost the same.
this patch optimizes both by utilizing the heavily optimized
function find_next_bit to find the offset of the next dirty
bit in the dirty bitmaps.
The following artifical test (just the bitmap operation part) running
vnc_update_client 65536 times on a 2560x2048 surface illustrates the
performance difference:
All bits clean - vnc_update_client_new: 0.07 secs
vnc_update_client_old: 10.98 secs
All bits dirty - vnc_update_client_new: 11.26 secs
vnc_update_client_old: 20.19 secs
Few bits dirty - vnc_update_client_new: 0.08 secs
vnc_update_client_old: 10.98 secs
The case for all bits dirty is still rather slow, this
is due to the implementation of find_and_clear_dirty_height.
This will be addresses in a separate patch.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
this allows for setting VNC_DIRTY_PIXELS_PER_BIT to different
values than 16 if desired.
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spotted by Coverity:
876 static int vnc_update_client_sync(VncState *vs, int has_dirty)
877 {
(1) Event freed_arg: "vnc_update_client(VncState *, int)" frees "vs". [details]
Also see events: [deref_arg]
878 int ret = vnc_update_client(vs, has_dirty);
(2) Event deref_arg: Calling "vnc_jobs_join(VncState *)" dereferences freed pointer "vs". [details]
Also see events: [freed_arg]
879 vnc_jobs_join(vs);
880 return ret;
881 }
Remove vnc_update_client_sync wrapper, replace it with an additional
argument to vnc_update_client, so we can so the sync properly in
vnc_update_client (i.e. skip it in case of a client disconnect).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Hi,
When I use RealVNC viewer client (http://www.realvnc.com/) to connect vnc server,
the client disconnect suddenly, and I click reconnect button immediately, then the Qemu crashed.
In the function vnc_worker_thread_loop, will call vnc_async_encoding_start
to set the local vs->output buffer by global queue's buffer. Then send rectangles to
the vnc client call function vnc_send_framebuffer_update. Finally, Under normal circumstances,
call vnc_async_encoding_end to set the global queue'buffer by the local vs->output conversely.
When the vnc client disconnect, the job->vs->csock will be set to -1. And the current prcoess
logic will goto disconnected partion without call function vnc_async_encoding_end.
But, the function vnc_send_framebuffer_update will call buffer_reserve, which
maybe call g_realloc reset the local vs's buffer, meaning the global queue's buffer is modified also.
If anyone use the original global queue's buffer memory will cause corruption and then crash qemu.
This patch assure the function vnc_async_encoding_end being called
even though the vnc client disconnect suddenly.
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
VncTight member uint8_t quality is either (uint8_t)-1 for lossless or
less than 10 for lossy.
tight_detect_smooth_image() first promotes it to int, then compares
with -1. Always unequal, so we always execute the lossy code. Reads
beyond tight_conf[] and returns crap when quality is actually
lossless.
Compare to (uint8_t)-1 instead, like we do elsewhere.
Spotted by Coverity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If enabled, set the thread name at creation (on GNU systems with
pthread_set_np)
Fix up all the callers with a thread name
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
I've ported the SDL1.2 code over, and rewritten it to use the SDL2 interface.
The biggest changes were in the input handling, where SDL2 has done a major
overhaul, and I've had to include a generated translation file to get from
SDL2 codes back to qemu compatible ones. I'm still not sure how the keyboard
layout code works in qemu, so there may be further work if someone can point
me a test case that works with SDL1.2 and doesn't with SDL2.
Some SDL env vars we used to set are no longer used by SDL2,
Windows, OSX support is untested,
I don't think we can link to SDL1.2 and SDL2 at the same time, so I felt
using --with-sdlabi=2.0 to select the new code should be fine, like how
gtk does it.
v1.1: fix keys in text console
v1.2: fix shutdown, cleanups a bit of code, support ARGB cursor
v2.0: merge the SDL multihead patch into this, g_new the number of consoles
needed, wrap DCL inside per-console structure.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Fixes & improvements by kraxel:
* baum build fix
* remove text console logic
* adapt to new input core
* codestyle fixups
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This removes the last user of the lecagy input mouse handler list,
so we can remove more legacy bits with this.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
legacy mouse event handlers are registered in the new core,
so they receive events submitted to the new input core.
legacy kbd_mouse_event() continues to use the old code paths.
So new-core event handlers wouldn't see events submitted via
kbd_mouse_event.
This leads to the constrain that we we must transition all
kbd_mouse_event() users first to keep things working. But
that is easier to handle than translating legacy mouse events
into new-core mouse events ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Transform absolute mouse events according to graphic_rotate.
Legacy input code does it for both absolute and relative events,
but the logic is broken for relative coordinates, so this is
most likely not used anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Likewise a bunch of helper functions to manage mouse button
and movement events, again to make life easier for the ui code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
legacy kbd event handlers are registered in the new core,
so they receive events from the new input core code.
keycode -> scancode translation needed here.
legacy kbd_put_keycode() sends events to the new core.
scancode -> keycode translation needed here.
So with this patch the new input core is fully functional
for keyboard events. New + legacy interfaces can be mixed
in any way.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
A bunch of helper functions to manage keyboard events,
to make life simpler for the ui code when submitting
keyboard events.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
GTK uses different hardware keycodes on Windows hosts, so some special
handling is needed to get the QEMU keycode.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
The ui/cocoa.m file has just three lines with hardcoded tabs; fix them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1387886052-27067-1-git-send-email-peter.maydell@linaro.org
If our redraw method is called before we have any data from the guest,
then draw a black rectangle rather than leaving the window empty.
This mostly only matters when the guest machine has no framebuffer
device, but it is more in line with the behaviour of other QEMU UIs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-3-git-send-email-peter.maydell@linaro.org
If the surface switch involved a resize, we were doing the redraw
at the old size rather than the new, because the update of
screen.width and screen.height was being done after the setFrame
method calls which triggered a redraw. Normally this isn't very
noticeable because typically after the guest triggers the window
resize it also draws something to it, which will in turn cause
us to redraw. However, the combination of a guest which never
draws to the display and a command line setting of a screen size
larger than the default can reveal odd effects.
Move most of the handling of resizes to the top of the method,
and guard it with a check that the surface size actually changed,
to avoid unnecessary operations (including some user visible ones
like "recenter the window on the screen") if the surface is the
same size as the old one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1387853507-26298-2-git-send-email-peter.maydell@linaro.org
Fix a number of bugs in the code for starting QEMU via the image
file load dialog:
* use the actual argv[0] rather than "qemu": this avoids failures to
find BIOS image files caused by not looking in the correct directory
relative to the executable path
* allocate a large enough argv array to NULL terminate it
* use g_strdup(X) rather than g_strdup_printf("%s", X) or
g_strdup_printf(X)
* disable the printing of the simulated command line argument
(which is presumably intended for debug only)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-6-git-send-email-peter.maydell@linaro.org
Add ".qcow2" to the list of file extensions which are accepted
by the initial disk image load dialog which is displayed if the
user runs QEMU without any command line arguments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-5-git-send-email-peter.maydell@linaro.org
Fix various non-user-visible typos in comments and variable names.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1386543546-31919-3-git-send-email-peter.maydell@linaro.org
The guest might want to be able to use the command key for its won
purposes (as command if it is MacOS X, or for the Windows key if
it is a PC guest, for instance). In line with other UI frontends,
pass it through if the guest has mousegrab, and only use it for UI
menu accelerators if not grabbed.
Thanks to John Arbuckle for reporting this problem, helping
us work through what the best solution would be and providing
a patch which was the initial inspiration for this one.
Reported-by: John Arbuckle <programmingkidx@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1386543546-31919-2-git-send-email-peter.maydell@linaro.org
This improves readability and simplifies the code.
Cc: Andreas Färber <andreas.faerber@web.de>
Cc: Anthony Liguori <aliguori@amazon.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Video streaming detection heuristics in spice-server have problems
keeping modern desktop animations (as done by gnome shell) and real
video playback apart. This leads to jpeg compression artefacts on
your desktop, due to spice using mjpeg to send what it thinks is
a video stream.
Turn off video detection by default to avoid these artifacts.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Prevent a call to put_kbd if null.
On shutdown of some OSes, the keyboard handler goes away before the
system is down. If a key is typed during this window, qemu crashes.
Signed-off-by: Don Koch <dkoch@verizon.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Most code already used QEMUTimer without the redundant 'struct' keyword.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This reduces the dependencies on trace.h.
Only two source files which need console.h also need trace.h.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Don't run code in the signal handler, only set a flag.
Use sigaction(2) to avoid non-portable signal(2) semantics.
Make #ifdefs less messy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1385130903-20531-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
The local function console_print_text_attributes is no longer used since
commit 7d6ba01c37.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds all missing characters used in regional keymap
files which already exist in QEMU. I checked for the missing
characters by going through all of the keymaps and matching that
with records in vnc_keysym.h. If the key wasn't found I looked
it up in libxkbcommon library [1]. If I understood it correctly
this is also the same place where most of the keymaps were
exported from according to the comment on the first line in those
files. I was able to find all symbols except "quotebl" used
in Netherland keymap.
I tested this update with Czech keyboard by myself. I also asked
Matej Serc to test Slovenian keyboard layout - he reported problems
with it few days ago on this mailing list. Both layouts seems
to work fine. I wasn't able to test the remaining layouts but
since this change doesn't modify any existing symbols, just adds
new ones, I don't expect any sideeffects.
[1] http://cgit.freedesktop.org/xorg/lib/libxkbcommon
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds support for Unicode symbols in keymap files. This
feature was already used in some keyboard layouts in QEMU generated
from XKB (e.g. Arabic) but it wasn't implemented in QEMU source code.
There is no need for check of validity of the hex string after U character
because strtol returns 0 in case the conversion was unsuccessful.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This patch adds missing Czech characters to the VNC keysym table.
Signed-off-by: Jan Krupa <jkrupa@suse.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Currently, If the setting of video mode failed, qemu will exit. It
should go back to the previous setting if the new screen resolution
failed. This patch fixes LP#1216368, add support to revert to existing
surface for the failure of video mode setting.
Reported-by: Sascha Krissler <sascha@srlabs.de>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1378285636-7091-1-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
* it's -> its
* grammar fix in ui/vnc-enc-zywrle.h
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Don Koch <dkoch@verizon.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
# By Peter Maydell (3) and Ákos Kovács (2)
# Via Paolo Bonzini
* bonzini/configure:
ui/Makefile.objs: delete unnecessary cocoa.o dependency
default-configs/: CONFIG_GDBSTUB_XML removed
Makefile.target: CONFIG_NO_* variables removed
rules.mak: New string testing functions
rules.mak: New logical functions for handling y/n values
This patch fixes spice display initialization to handle
multihead properly.
spice-core now keeps track of which QemuConsole has a spice
display channel attached to it and which has not. It also
manages display channel ids.
spice-display looks at all QemuConsoles and will pick up any
graphic console not yet bound to a spice channel (which in practice
are all non-qxl graphic devices).
Result is that
(a) you'll get a spice client window for each graphical device
now (first only without this patch), and
(b) mixing qxl and non-qxl vga cards works properly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
ui/vnc.c:vnc_display_open() and spice-server/server/reds.c:do_spice_init()
are both calling sasl_server_init(). If spice_server_set_sasl_appname()
hasn't been called, spice-server will call it with "spice" as an appname,
causing cyrus-sasl to try to use a /etc/sasl2/spice.conf config file rather
than the /etc/sasl2/qemu.conf file that QEMU uses.
When using -spice sasl on the command line, QEMU properly calls
spice_server_set_sasl_appname() to set the SASL appname as "qemu",
but when using a QXL device without using SPICE, spice_server_init()
is called from qemu_spice_add_interface() without setting the appname
to "qemu", which then causes the VNC code to try to use spice.conf
instead of qemu.conf.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Delete an unnecessary dependency for cocoa.o; we already have
a general rule that tells Make that we can build a .o file
from a .m source using an ObjC compiler, so this specific
rule is unnecessary. Further, it is using the dubious construct
"$(SRC_PATH)/$(obj)" to get at the source directory, which will
break when $(obj) is redefined as part of the preparation for
per-object library support.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several places in spice-core.c were using either g_malloc+snprintf
or snprintf+g_strdup to achieve the same result as g_strdup_printf.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
These include files don't exist for MinGW and are not needed for Linux
(and hopefully for other hosts as well), so remove them.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
include/qemu/timer.h has no need to include main-loop.h and
doing so causes an issue for the next patch. Unfortunately
various files assume including timers.h will pull in main-loop.h.
Untangle this mess.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Spice has two display interface implementations: One integrated into
the qxl graphics card, and one generic which can operate with every
qemu-emulated graphics card.
The generic one is activated in case spice is used without qxl. The
logic for that only caught the "-vga qxl" case, "-device qxl-vga" goes
unnoticed. Fix that by adding a check in the spice interface
registration so we'll notice the qxl card no matter how it is created.
https://bugzilla.redhat.com/show_bug.cgi?id=981094
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Commit 29ae8a4133 ("rdma: introduce
MIG_STATE_NONE and change MIG_STATE_SETUP state transition") changed the
state transitions during migration setup.
Spice used to be notified with MIG_STATE_ACTIVE and it detected this
using migration_is_active(). Spice is now notified with
MIG_STATE_SETUP and migration_is_active() no longer works.
Replace migration_is_active() with migration_in_setup() to fix spice
migration.
Cc: Michael R. Hines <mrhines@us.ibm.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is in fact very simply: When the input in grabbed, everything
should be exclusively passed to the guest - except it has our magic
CTRL-ALT modifier set. Then let GTK filter out those accels that are in
use. When checking the modifier state, we just need to filter out NUM
and CAPS lock.
Note: Filtering based on hard-coded modifiers breaks overriding
accelerators. Needs to be fixed at a later point.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Put them named "console[$index]" below "/backend", so you can
list & inspect them via QMP.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1372150171-8707-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also use CAIRO_FORMAT_RGB24 unconditionally. DisplaySurfaces will never
ever see 8bpp surfaces. And using CAIRO_FORMAT_RGB16_565 for the 16bpp
case doesn't seem to be a good idea too.
<quote src="/usr/include/cairo/cairo.h">
* @CAIRO_FORMAT_RGB16_565: This format value is deprecated. It has
* never been properly implemented in cairo and should not be used
* by applications. (since 1.2)
</quote>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1372150134-8590-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Some arguments to these functions are booleans - either by declaration,
or by actual usage, but sometimes value of 0 or 1 is passed for a bool,
and sometimes it is declared as int but a bool value, or true/false,
is passed to it instead. Clean it up a bit.
Cc: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
With GTK 3, the function gdk_cursor_unref is deprecated:
qemu/ui/gtk.c: In function ‘gd_cursor_define’:
qemu/ui/gtk.c:380:5: error:
‘gdk_cursor_unref’ is deprecated (declared at /usr/include/gtk-3.0/gdk/gdkcursor.h:233): Use 'g_object_unref' instead [-Werror=deprecated-declarations]
Fix the gcc compiler warning by using conditional compilation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1371391987-10795-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In two places qemu uses openpty() which is very system-dependent,
and in both places the pty is switched to raw mode as well.
Make a wrapper function which does both steps, and move all the
system-dependent complexity into a separate file, together
with static/local implementations of openpty() and cfmakeraw()
from qemu-char.c.
It is in a separate file, not part of oslib-posix.c, because
openpty() often resides in -lutil which is not linked to
every program qemu builds.
This change removes #including of <pty.h>, <termios.h>
and other rather specific system headers out of qemu-common.h,
which isn't a place for such specific headers really.
This version has been verified to build correctly on Linux,
OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu
to be built with gtk gui which were not possible there due to
missing openpty() and cfmakeraw().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Andreas Färber <andreas.faerber@web.de>
Aiming for GTK as replacement for SDL, a feature like -full-screen should also
be implemented.
Bringing the window into full-screen mode is done by activating the "Fullscreen"
menu item. This is done after showing the windows to make the cursor and menu
hidden.
v2: drop -no-frame implementation, use booleans instead of ints and ensure
consistency between ui state and menu.
Signed-off-by: Peter Wu <lekensteyn@gmail.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET,
and it was issued as a bottom-half:
86e94dea5b
Which we basically used to print out a greeting/prompt for the
monitor.
AFAICT the only reason this was ever done in a BH was because in
some cases we'd modify the chr_write handler for a new chardev
backend *after* the site where we issued the reset (see:
86e94d:qemu_chr_open_stdio())
At some point this event was renamed to CHR_EVENT_OPENED, and we've
maintained the use of this BH ever since.
However, due to 9f939df955, we schedule
the BH via g_idle_add(), which is causing events to sometimes be
delivered after we've already begun processing data from backends,
leading to:
known bugs:
QMP:
session negotation resets with OPENED event, in some cases this
is causing new sessions to get sporadically reset
potential bugs:
hw/usb/redirect.c:
can_read handler checks for dev->parser != NULL, which may be
true if CLOSED BH has not been executed yet. In the past, OPENED
quiesced outstanding CLOSED events prior to us reading client
data. If it's delayed, our check may allow reads to occur even
though we haven't processed the OPENED event yet, and when we
do finally get the OPENED event, our state may get reset.
qtest.c:
can begin session before OPENED event is processed, leading to
a spurious reset of the system and irq_levels
gdbstub.c:
may start a gdb session prior to the machine being paused
To fix these, let's just drop the BH.
Since the initial reasoning for using it still applies to an extent,
work around that by deferring the delivery of CHR_EVENT_OPENED until
after the chardevs have been fully initialized, toward the end of
qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This
defers delivery long enough that we can be assured a CharDriverState
is fully initialized before CHR_EVENT_OPENED is sent.
Also, rather than requiring each chardev to do an explicit open, do it
automatically, and allow the small few who don't desire such behavior to
suppress the OPENED-on-init behavior by setting a 'explicit_be_open'
flag.
We additionally add missing OPENED events for stdio backends on w32,
which were previously not being issued, causing us to not recieve the
banner and initial prompts for qmp/hmp.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current icon looks pretty terrible rendered in Gnome. This
switches to a transparent SVG which looks much nicer.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It's not a GObject.
Cc: Gerd Hoffman <kraxel@redhat.com>
Reported-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
---
v1 -> v2
- Fix summary to agree with code (Peter)
In MacOSX 10.6 and above the NSOpenPanel beginSheetForDirectory
method is deprecated. Use the preferred replacements instead.
We retain the original code for use on earlier MacOSX versions
because the replacement methods don't exist before 10.6.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Avoid the NSOpenPanel filename method (deprecated in MacOSX 10.6)
in favour of using the URL method and extracting the path from the
resulting NSUrl object.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
The functions CPSGetCurrentProcess and CPSEnableForegroundOperation
are deprecated in newer versions of MacOSX and cause warning messages
to be logged to the system log. Instead, use the new preferred method
of promoting our console process up to a graphical app with menubar
and Dock icon, which is TransformProcessType. (This function came
in with MacOSX 10.3, so there's no need to retain the old method as
we don't support anything earlier than 10.3 anyway.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
On MacOSX 10.8 QEMU provokes system log messages:
11/03/2013 17:03:29.998 qemu-system-arm[42586]: objc[42586]: Object
0x7ffbf9c2f3b0 of class NSScreen autoreleased with no pool in place - just
leaking - break on objc_autoreleaseNoPool() to debug
11/03/2013 17:03:29.999 qemu-system-arm[42586]: objc[42586]: Object
0x7ffbf9c3a010 of class NSConcreteMapTable autoreleased with no pool in
place - just leaking - break on objc_autoreleaseNoPool() to debug
This is because we call back into Cocoa from threads other than
the UI thread (specifically from the CPU thread). Since we created
these threads via the POSIX API rather than NSThread, they don't have
automatically created autorelease pools. Guard all the functions where
QEMU can call back into the Cocoa UI code with autorelease pools
so that we don't leak any Cocoa objects.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
It's clearer to use defined macros than magic numbers.
Signed-off-by: Amos Kong <akong@redhat.com>
Reviewed-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The ledstate should be compared before modifiers updated,
otherwise the ledstate would be the same as current_led_state.
Reported-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1368606040-11950-1-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should fix building the GTK+ front-end on BSDs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368533121-30796-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 9697f5d2d3 "gtk: custom cursor support"
introduced unconditional usage of gdk_display_warp_pointer(). This function
is marked as deprecated since GTK-3.0, and triggers warning (error with -Werror)
during compilation.
Conditionally change gdk_display_warp_pointer() method usage to gdk_device_warp
usage, as suggested by compiler.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 1368197985-44608-1-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
