Geometry needs to be qdev properties, because it belongs to the
disk's guest part.
Maintain backward compatibility exactly like for serial: fall back to
DriveInfo's geometry, set with -drive cyls=...
Bonus: info qtree now shows the geometry.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Best to use the same type, to avoid unwanted truncation or sign
extension.
BlockConf can't use plain int for cyls, heads and secs, because
integer properties require an exact width.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
hd_geometry_guess() picks geometry and translation. Callers can get
the geometry directly, via parameters, but for translation they need
to go through the block layer.
Add a parameter for translation, so it can optionally be gotten just
like geometry. In preparation of purging translation from the block
layer, which will happen later in this series.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit f3d54fc4 factored it out of hw/ide.c for reuse. Sensible,
except it was put into block.c. Device-specific functionality should
be kept in device code, not the block layer. Move it to
hw/hd-geometry.c, and make stylistic changes required to keep
checkpatch.pl happy.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Currently the sector value for the geometry is masked, even if the
user usesa command line parameter that explicitely gives a number.
This breaks dasd devices on s390. A dasd device can have
a physical block size of 4096 (== same for logical block size)
and a typcial geometry of 15 heads and 12 sectors per cyl.
The ibm partition detection relies on a correct geometry
reported by the device. Unfortunately the current code changes
12 to 8. This would be necessary if the total size is
not a multiple of logical sector size, but for dasd this
is not the case.
This patch checks the device size and only applies sector
mask if necessary.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
CC: Christoph Hellwig <hch@lst.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The local variables ret, i are only used if __linux__ is defined.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
VIRTIO_BLK_F_SCSI is supposed to mean whether the host can *parse*
SCSI requests, not *execute* them. You could run QEMU with scsi=on
and a file-backed disk, and QEMU would fail all SCSI requests even
though it advertises VIRTIO_BLK_F_SCSI.
Because we need to do this to fix a migration compatibility problem
related to how QEMU is invoked by management, we must do this
unconditionally even on older machine types. This more or less assumes
that no one ever invoked QEMU with scsi=off.
Here is how testing goes:
- old QEMU, scsi=on -> new QEMU, scsi=on
- new QEMU, scsi=on -> old QEMU, scsi=on
- old QEMU, scsi=off -> new QEMU, scsi=on
- new QEMU, scsi=off -> old QEMU, scsi=on
ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)
- old QEMU, scsi=off -> new QEMU, scsi=off
ok (new QEMU has VIRTIO_BLK_F_SCSI, adding host features is fine)
- old QEMU, scsi=on -> new QEMU, scsi=off
ok, bug fixed
- new QEMU, scsi=on -> old QEMU, scsi=off
doesn't work (same as: old QEMU, scsi=on -> old QEMU, scsi=off)
- new QEMU, scsi=off -> old QEMU, scsi=off
broken by the patch
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We will have to add another field to the virtio-blk configuration in
the next patch. Avoid a proliferation of arguments to virtio_blk_init.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Move it from virtio_blk_exit_pci to virtio_blk_exit.
This is included here because the next patch removes proxy->block.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Linux really looks only at scsi->errors for SG_IO requests; it does
not look at the virtio request status at all. Because of this, when
a SG_IO request is failed early with virtio_blk_req_complete(req,
VIRTIO_BLK_S_UNSUPP), without writing hdr.status, it will look like
a success to the guest.
This is their bug, but we can make it safe for older guests now by
forcing scsi->errors to have a non-zero value whenever a request
has to be failed.
But if we fix the bug in the guest driver, we will have another problem
because QEMU returns VIRTIO_BLK_S_IOERR if the status is non-zero, and
Linux translates that to -EIO. Rather, the guest should succeed the
request and pass the non-zero status via the userspace-provided SG_IO
structure. So, remove the case where virtio_blk_handle_scsi can
return VIRTIO_BLK_S_IOERR.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
They are QMP events, not monitor events. Rename them accordingly.
Also, move bdrv_emit_qmp_error_event() up in the file. A new event will
be added soon and it's good to have them next each other.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
There already exists a virtio_blk_handle_write trace event as well as
completion events. Add the virtio_blk_handle_read event so it's easy to
trace virtio-blk requests for both read and write operations.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU does have a "scsi" option (to be used like -device
virtio-blk-pci,drive=foo,scsi=off). However, it only
masks the feature bit, and does not reject the command
if a malicious guest disregards the feature bits and
issues a request.
Without this patch, using scsi=off does not protect you
from CVE-2011-4127.
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Replace
error_report("DEVICE-NAME: MESSAGE");
by just
error_report("MESSAGE");
in block device init functions.
DEVICE-NAME is bogus in some cases: it's "scsi-disk" for device
scsi-hd and scsi-cd, "virtio-blk-pci" for virtio-blk-s390, and
"usb-msd" for usb-storage.
There is no real need to put a device name in the message, because
error_report() points to the offending command line option already:
$ qemu-system-x86_64 --nodefaults --enable-kvm -vnc :0 -S -monitor stdio -usb -device virtio-blk-pci
upstream-qemu: -device virtio-blk-pci: virtio-blk-pci: drive property not set
upstream-qemu: -device virtio-blk-pci: Device 'virtio-blk-pci' could not be initialized
And for a monitor command, it's obvious anyway:
$ qemu-system-x86_64 --nodefaults --enable-kvm -vnc :0 -S -monitor stdio -usb
(qemu) device_add virtio-blk-pci
virtio-blk-pci: drive property not set
Device 'virtio-blk-pci' could not be initialized
Reported-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Initially done with the following semantic patch:
@ rule1 @
expression E;
statement S;
@@
E =
(
bdrv_aio_readv
| bdrv_aio_writev
| bdrv_aio_flush
| bdrv_aio_discard
| bdrv_aio_ioctl
)
(...);
(
- if (E == NULL) { ... }
|
- if (E)
{ <... S ...> }
)
which however missed the occurrence in block/blkverify.c
(as it should have done), and left behind some unused
variables.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Many places in QEMU call qemu_aio_flush() to complete all pending
asynchronous I/O. Most of these places actually want to drain all block
requests but there is no block layer API to do so.
This patch introduces the bdrv_drain_all() API to wait for requests
across all BlockDriverStates to complete. As a bonus we perform checks
after qemu_aio_wait() to ensure that requests really have finished.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When SCSI passthrough is being used by the guest with virtio-blk, the
guest is not able to detect disk failures. This is because the status
field is expected by the guest driver to include also the msg_status,
host_status and driver_status fields, but the device is only passing
down the SCSI status.
The patch fixes this, and also makes sure that the guest always sees a
CHECK_CONDITION status when there is valid sense data.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Next commit will convert the query-status command to use the
RunState type as generated by the QAPI.
In order to "transparently" replace the current enum by the QAPI
one, we have to make some changes to some enum values.
As the changes are simple renames, I'll do them in one shot. The
changes are:
- Rename the prefix from RSTATE_ to RUN_STATE_
- RUN_STATE_SAVEVM to RUN_STATE_SAVE_VM
- RUN_STATE_IN_MIGRATE to RUN_STATE_INMIGRATE
- RUN_STATE_PANICKED to RUN_STATE_INTERNAL_ERROR
- RUN_STATE_POST_MIGRATE to RUN_STATE_POSTMIGRATE
- RUN_STATE_PRE_LAUNCH to RUN_STATE_PRELAUNCH
- RUN_STATE_PRE_MIGRATE to RUN_STATE_PREMIGRATE
- RUN_STATE_RESTORE to RUN_STATE_RESTORE_VM
- RUN_STATE_PRE_MIGRATE to RUN_STATE_FINISH_MIGRATE
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Today, when notifying a VM state change with vm_state_notify(),
we pass a VMSTOP macro as the 'reason' argument. This is not ideal
because the VMSTOP macros tell why qemu stopped and not exactly
what the current VM state is.
One example to demonstrate this problem is that vm_start() calls
vm_state_notify() with reason=0, which turns out to be VMSTOP_USER.
This commit fixes that by replacing the VMSTOP macros with a proper
state type called RunState.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Device models should be able to set it without an unclean include of
block_int.h.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's convenience stuff for block device models, so block.h isn't the
ideal home either, but better than block_int.h.
Permits moving some #include "block_int.h" from device model .h into
.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It's a confused mess (see previous commit). No users remain.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
* qemu-common.h is not a system include file, so it should be included
with "" instead of <>. Otherwise incremental builds might fail
because only local include files are checked for changes.
* linux-user/syscall.c included the file twice.
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Multiplexing callbacks complicates matters needlessly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Decouple the I/O accounting from bdrv_aio_readv/writev/flush and
make the hardware models call directly into the accounting helpers.
This means:
- we do not count internal requests from image formats in addition
to guest originating I/O
- we do not double count I/O ops if the device model handles it
chunk wise
- we only account I/O once it actuall is done
- can extent I/O accounting to synchronous or coroutine I/O easily
- implement I/O latency tracking easily (see the next patch)
I've conveted the existing device model callers to the new model,
device models that are using synchronous I/O and weren't accounted
before haven't been updated yet. Also scsi hasn't been converted
to the end-to-end accounting as I want to defer that after the pending
scsi layer overhaul.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Calling virtio_cleanup() will free up memory allocated in
virtio_common_init().
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It needs to be a qdev property, because it belongs to the drive's
guest part. Precedence: commit a0fef654 and 6ced55a5.
Bonus: info qtree now shows the serial number.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Like all block drivers virtio-blk should not allow small than block size
granularity access. But given that the protocol specifies a
byte unit length field we currently accept such requests, which cause
qemu to abort() in lower layers. Add checks to the main read and
write handlers to catch them early.
Reported-by: Conor Murphy <conor_murphy_virt@hotmail.com>
Tested-by: Conor Murphy <conor_murphy_virt@hotmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Define and use dedicated constants for vm_stop reasons, they actually
have nothing to do with the EXCP_* defines used so far. At this chance,
specify more detailed reasons so that VM state change handlers can
evaluate them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Raise a config change interrupt when the size changed. This allows
virtio-blk guest drivers to read-read the information from the
config space once it got the config chaged interrupt.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
virtio-blk doesn't work on cross-endian configuration, as endianness is
not handled correctly.
This patch adds missing endianness conversions to make virtio-blk
working. Tested on the following configurations:
- i386 guest on x86_64 host
- ppc guest on x86_64 host
- i386 guest on mips host
- ppc guest on mips host
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
If bootindex is specified on command line a string that describes device
in firmware readable way is added into sorted list. Later this list will
be passed into firmware to control boot order.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Errors should be logged using error_report() so they go to the
appropriate monitor.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix virtio-blk to use the usual completion path that involves werror handling
instead of directly completing the request in cases where bdrv_aio_flush
returns NULL.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The werror option now affects not only write requests, but also flush requests.
Previously, it was not possible to stop a VM on a failed flush.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
in_sg[].iovec and out_sg[].ioved are pointer to (source) host memory and
therefore invalid after migration. When loading the device state we must
create a new mapping on the destination host.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Changing block.h or blockdev.h resulted in recompiling most objects.
Move DriveInfo typedef and BlockInterfaceType enum definitions
to qemu-common.h and rearrange blockdev.h use to decrease churn.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Otherwise we can't migrate after we've removed a virtio block device.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Disks without media make no sense. For SCSI, a Linux guest kernel
complains during boot. I didn't try other combinations.
scsi-generic doesn't need the additional check, because it already
requires bdrv_is_sg(), which fails without media.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the check from virtio_blk_init_pci(), where it protects only
virtio-blk-pci, to virtio_blk_init(). Without that, virtio-blk-s390
initializes without a drive. I figure that can lead to null pointer
dereferences.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When available, we'd like to be able to access the DeviceState
when registering a savevm. For buses with a get_dev_path()
function, this will allow us to create more unique savevm
id strings.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds the final missing bits for support of
passing a serial/id string to a virtio-blk guest driver.
The guest-side component already exists in the virtio
driver, and has recently been reworked by Ryan to export
a /sys interface for retrieval of the id from guest userland.
Signed-off-by: john cooper <john.cooper@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>