According to RFC 1123 [1], hostnames can start with a digit too.
[1] http://tools.ietf.org/html/rfc1123#page-13
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Cc: qemu-stable@nongnu.org
[Use strspn, not strcspn. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This is a little strange. It is lowering the parent IRQ pin on input
when HIE is cleared. There is no such behaviour in the real hardware.
ISR changes based on interrupt pin state are already guarded on HIE
being set. So we can just delete this if in its entirety.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
When the Hardware Interrupt Enable (HIE) bit is set, software cannot
change ISR. Add write guard accordingly.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Acking a level sensitive interrupt should have no effect if the
interrupt pin is still asserted. The current implementation requires
and edge condition to occur for setting a level sensitive IRQ, which
means an ACK can clear a level sensitive interrupt, until the original
source strobes the interrupt again.
Fix by keeping track of the interrupt pin state and setting ISR based
on this every time update_irq() is called.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
For level sensitive interrupts, ISR bits are cleared when the input pin
is lowered. This is incorrect. Only software can clear ISR bits (via
IAR or direct write to ISR with !MER(2)).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
The UART IRQ is edge sensitive, whereas the machine was registering it
as level sensitive. Fix.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
# By Luiz Capitulino
# Via Luiz Capitulino
* luiz/queue/qmp:
qerror: drop QERR_OPEN_FILE_FAILED macro
block: bdrv_reopen_prepare(): don't use QERR_OPEN_FILE_FAILED
savevm: qmp_xen_save_devices_state(): use error_setg_file_open()
dump: qmp_dump_guest_memory(): use error_setg_file_open()
cpus: use error_setg_file_open()
blockdev: use error_setg_file_open()
block: mirror_complete(): use error_setg_file_open()
rng-random: use error_setg_file_open()
error: add error_setg_file_open() helper
Message-id: 1371484631-29510-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Liu Yuan (2) and others
# Via Kevin Wolf
* kwolf/for-anthony:
vmdk: Allow reading variable size descriptor files
NVMe: Initial commit for new storage interface
curl: Don't set curl options on the handle just before it's going to be deleted.
vmdk: byteswap VMDK4Header.desc_offset field
block/curl.c: Refuse to open the handle for writes.
sheepdog: support 'qemu-img snapshot -a'
sheepdog: fix snapshot tag initialization
Message-id: 1371486710-17793-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
rotr_i32 calculates the amount to left shift and puts it into a
temporary, but then doesn't use it when doing the shift.
Cc: qemu-stable@nongnu.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
add2_i64 was adding the lower double word to the upper double word
of each input. Fix this so we add the lower double words, then the
upper double words with carry propagation.
Cc: qemu-stable@nongnu.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
If our input and output is in the same register, bswap64 tries to
undo a rotate of the input. This just ends up rotating the output.
Cc: qemu-stable@nongnu.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
The rldcl instruction doesn't have an sh field, so the minor opcode
is shifted 1 bit. We were using the XO30 macro which shifted the
minor opcode 2 bits.
Remove XO30 and add MD30 and MDS30 macros which match the
Power ISA categories.
Cc: qemu-stable@nongnu.org
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
the hard-coded 2k buffer on the stack won't allow reading big descriptor
files which can be generated when storing big images. For example 500G
vmdk splitted to 2G chunks.
Signed-off-by: Evgeny Budilovsky <evgeny.budilovsky@ravellosystems.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Initial commit for emulated Non-Volatile-Memory Express (NVMe) pci
storage device.
NVMe is an open, industry driven storage specification defining
an optimized register and command set designed to deliver the full
capabilities of non-volatile memory on PCIe SSDs. Further information
may be found on the organizations website at:
http://www.nvmexpress.org/
This commit implements the minimum from the specification to work with
existing drivers.
Cc: Keith Busch <keith.busch@gmail.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
(Found by Kamil Dudka)
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Cc: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Remember to byteswap VMDK4Header.desc_offset on big-endian machines.
Cc: qemu-stable@nongnu.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Just call sd_create_branch() in the snapshot_goto to rollback the image is good
enough. With this patch, 'loadvm' process for sheepdog is modified:
Suppose we have a snapshot chain A --> B --> C, we do 'loadvm A' so as to get
a new chain,
A --> B
|
V
C1
in the old code:
1 reload inode of A (in snapshot_goto)
2 read vmstate via A's vdi_id (loadvm_state)
3 delete C and create C1, reload inode of C1 (sd_create_branch on write)
with this patch applied:
1 reload inode of A, delete C and create C1 (in snapshot_goto)
2 read vmstate via C1's parent, that is A's vdi_id (loadvm_state)
This will fix the possible bug that QEMU exit between 2 and 3 in the old code
Cc: qemu-devel@nongnu.org
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This is an old and obvious bug. We should pass snapshot_id to the
tag. Or simple command like 'qemu-img snapshot -a tag sheepdog:image' will fail
Cc: qemu-devel@nongnu.org
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Liu Yuan <namei.unix@gmail.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The call to drv->bdrv_reopen_prepare() can fail due to reasons
other than an open failure. Unfortunately, we can't use errno
nor -ret, cause they are not always set.
Stick to a generic error message then.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
# By Paolo Bonzini (4) and others
# Via Peter Maydell
* pmaydell/configury.next:
ppc: Remove CONFIG_FDT conditionals
microblaze: Remove CONFIG_FDT conditionals
arm: Remove CONFIG_FDT conditionals
configure: Require libfdt for arm, ppc, microblaze softmmu targets
configure: dtc: Probe for libfdt_env.h
build: drop TARGET_TYPE
main: use TARGET_ARCH only for the target-specific #define
build: do not use TARGET_ARCH
build: rename TARGET_ARCH2 to TARGET_NAME
Add a stp file for usage from build directory
Message-id: 1371221594-11556-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Michael Tokarev (1) and Vladimir Senkov (1)
# Via Michael Tokarev
* mjt/trivial-patches:
char/serial: fix copy&paste error (fifo8_is_full vs empty)
vl: always define no_frame
Message-id: 1371455050-9523-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Copy&paste error in serial.c causes a crash when attempting
to read from UART (if there is no data to be read)
Signed-off-by: Vladimir Senkov <hangup@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Commit 047d4e151d "Unbreak -no-quit for GTK, validate SDL options" broke
build of qemu without sdl, by referencing `no_frame' variable which is defined
inside #if SDL block. Fix that by defining that variable unconditionally.
This is a better fix for the build issue introduced by that patch than
a revert. This change keeps the new functinality introduced by that patch
and just fixes the compilation. It still is not a complete fix around the
original issue (not working -no-frame et al with -display gtk), because it
makes only the legacy interface working, not the new suboption interface,
so a few more changes are needed.
Cc: Peter Wu <lekensteyn@gmail.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Wu <lekensteyn@gmail.com>
With GTK 3, the function gdk_cursor_unref is deprecated:
qemu/ui/gtk.c: In function ‘gd_cursor_define’:
qemu/ui/gtk.c:380:5: error:
‘gdk_cursor_unref’ is deprecated (declared at /usr/include/gtk-3.0/gdk/gdkcursor.h:233): Use 'g_object_unref' instead [-Werror=deprecated-declarations]
Fix the gcc compiler warning by using conditional compilation.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1371391987-10795-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 047d4e151d "Unbreak -no-quit for GTK, validate SDL options" broke
build of qemu without sdl, by referencing `no_frame' variable which is defined
inside #if SDL block. Fix that by defining that variable unconditionally.
This is a better fix for the build issue introduced by that patch than
a revert. This change keeps the new functinality introduced by that patch
and just fixes the compilation. It still is not a complete fix around the
original issue (not working -no-frame et al with -display gtk), because it
makes only the legacy interface working, not the new suboption interface,
so a few more changes are needed.
Cc: Peter Wu <lekensteyn@gmail.com>
Cc: qemu-trivial@nongnu.org
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Wu <lekensteyn@gmail.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Message-id: 1371292923-28105-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'realize-isa.v2' of git://github.com/afaerber/qemu-cpu:
qdev: Drop FROM_QBUS() macro
isa: QOM'ify ISADevice
isa: QOM'ify ISABus
i8259: Convert PICCommonState to use QOM realizefn
kvm/i8259: QOM'ify some more
i8259: QOM'ify some more
i8254: Convert PITCommonState to QOM realizefn
kvm/i8254: QOM'ify some more
i8254: QOM'ify some more
isa: Use realizefn for ISADevice
cs4231a: QOM'ify some more
gus: QOM'ify some more
bd07684aac added a test to ensure BSY
flag is set when a flush request is in flight. It does this by setting
a blkdebug breakpoint on flush_to_os before issuing a CMD_FLUSH_CACHE.
It then resumes CMD_FLUSH_CACHE operation and checks that BSY is unset.
The actual unsetting of BSY does not occur until ide_flush_cb gets
called in a bh, however, so in some cases this check will race with
the actual completion.
Fix this by polling the ide status register until BSY flag gets unset
before we do our final sanity checks. According to
f68ec8379e this is in line with how a guest
would determine whether or not the device is still busy.
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now that we know we're compiling with libfdt we can remove the
CONFIG_FDT conditionals.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 1369409217-7553-5-git-send-email-peter.maydell@linaro.org
