Change pointer to struct by embedded struct.
Adjust all callers
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It is used everywhere as uint8_t except in one place. Cast to uint16_t
in that place
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
It was used for Acer Pica 61 emulation, removed in 2008
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If I am using vga and serial which is stdio and hit C-c on
serial console, qemu terminates. That is annoying for me.
So make it configurable whether signal is generated when C-c is hit.
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changes:
- create common scsi_hot_add function for adding a scsi disk to
a adapter.
- Add sanity checks. You can't drive_add disks to the VGA any more.
- Ignore the unit value calculated by drive_init, add a comment
explaining why. Review the patch to find the details ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Explicitly add the drive to the bus of the newly created scsi adapter
instead of hoping that scsi_bus_legacy_handle_cmdline() picks it up
correctly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a 'index' property to the isa-parallel and isa-serial
devices. This can be used to create devices with the default isa irqs
and ioports by simply specifying the index, i.e.
-device isa-serial,index=1
instead of
-device isa-serial,iobase=0x2f8,irq=3
for ttyS1 aka com2. Likewise for parallel ports.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The other pxe roms are loaded by the drivers individual drivers now.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Initialization path will work with both converted and not-converted
drivers, so we can convert drivers one by one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Function test whenever a driver has a specific property.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add a new type for properties common to all nics.
Add helper functions and macros to deal with it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Make the mac property use the newly added type for the mac address.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Add new type for mac addresses.
Add function which sets the qemu default mac address if it finds the mac
address uninitialized (i.e. all zeros).
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Currently, after a migration qemu sends a broadcast packet to update
switches' MAC->port mappings.
Unfortunately, it picks a random (constant) ethertype and crosses its
fingers that no one else is using it.
This patch causes it to send a RARP packet instead. RARP was chosen for
2 reasons. One, it is always harmless, and will continue to be so even
as new ethertypes are allocated. Two, it is what VMware ESX sends, so
people who write filtering rules for switches already know about it.
I also changed the code to send SELF_ANNOUNCE_ROUNDS packets, instead of
SELF_ANNOUNCE_ROUNDS + 1, and added a simple backoff scheme.
Signed-off-by: Nolan Leake <nolan <at> sigbus.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On Wed, Sep 23, 2009 at 10:55:02PM +0200, Juergen Lock wrote:
> On Wed, Sep 23, 2009 at 09:31:16PM +0100, Laurence Tratt wrote:
>[...]
> > then the above error doesn't occur, but
> > pc-bios/optionrom/multiboot.S dies as follows:
> >
> > $
> > AS optionrom/multiboot.o
> > multiboot.S: Assembler messages:
> > multiboot.S:116: Error: `%es:-4(%edi)' is not a valid 16 bit base/index
> > expression
> > $
> >
> > What little Intel assembler I ever knew has long since departed from my
> > brain, so I don't know why that error occurs, nor what a fix might be.
> >
> It occurs because of too old binutils (as(1) in this case), on FreeBSD
> we now have a port for newer ones,
> http://www.freshports.org/devel/binutils
> so I depend on that and have the optionrom Makefile use the new as
> like this: (the first change wrt CFLAGS is unrelated and has probably
> been fixed in the meantime; it caused gmake to complain about
> recursive use of CFLAGS.)
>
> Index: qemu/pc-bios/optionrom/Makefile
> @@ -9,10 +9,13 @@
>
> CFLAGS = -Wall -Wstrict-prototypes -Werror -fomit-frame-pointer -fno-builtin
> CFLAGS += -I$(SRC_PATH)
> -CFLAGS += $(call cc-option, $(CFLAGS), -fno-stack-protector,"")
> +CFLAGS := $(CFLAGS) $(call cc-option, $(CFLAGS), -fno-stack-protector,"")
>
> build-all: multiboot.bin
>
> +%.o: %.S
> + $(CC) -E $(CFLAGS) -o - -c $< |${LOCALBASE}/bin/as -V -Qy -o $@
> +
> %.img: %.o
> $(call quiet-command,$(LD) -Ttext 0 -e _start -s -o $@ $<," Building $(TARGET_DIR)$@")
>
That patch didn't seem to help on OpenBSD so I now finally got around
making another one that just emits the bytes of the offending insn
instead so people can keep using old assemblers:
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When using Linux AIO raw still falls back to POSIX AIO sometimes, so we should
initialize it.
Not initializing it happens to work if POSIX AIO is used by another drive, or
if the format is not specified (probing the format uses POSIX AIO) or by pure
luck (e.g. it doesn't seem to happen any more with qcow2 since we have re-added
synchronous qcow2 functions).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
In case of failure, we haven't increased the refcount for the newly allocated
cluster yet. Therefore we must not free the cluster or its refcount will become
negative (and endless recursion is possible).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
0) This is an attempt to get an issue in usb-linux.c, for which a patch
was posted about a year ago, finally fixed.
1) Mark Burkley submitted a "EHCI emulation module" for review in in
October 2008 (see:
http://lists.gnu.org/archive/html/qemu-devel/2008-10/msg01326.html). No
EHCI emulation module was ever committed to qemu.
2) Part of that (large) patch was a fix for a separate issue in
usb-linux.c. Max Krasnyansky has ACK'ed that fix (see:
http://lists.gnu.org/archive/html/qemu-devel/2008-11/msg00032.html).
3) I already asked whether this fix was ready to be committed in last
April (see:
http://lists.gnu.org/archive/html/qemu-devel/2009-04/msg01763.html)
4) Maybe submitting this fix as a separate patch (with a really long
commit message but without a Signed-off-by) and cc-ing everbody involved
will help if actually getting this issue fixed.
Paul Bolle
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch makes make quiet again.
There is already a similar patch from Juan Quintela,
but maybe this shorter form is preferred.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>