qmp_error_response() will free the given error. Fix double-free in
later qmp_request_free().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20180705164201.9853-1-marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Fixes: 1cc3747152
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Truncation is the last to convert from open coded req handling to
reusing helpers. This time the permission check in prepare has to adapt
to the new caller: it checks a different permission bit, and doesn't
trigger the before write notifier.
Also, truncation should always trigger a bs->total_sectors update and in
turn call parent resize_cb. Update the condition in finish helper, too.
It's intended to do a duplicated bs->read_only check before calling
bdrv_co_write_req_prepare() so that we can be more informative with the
error message, as bdrv_co_write_req_prepare() doesn't have Error
parameter.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If we are growing the image and potentially using preallocation for the
new area, we need to make sure that no write requests are made to the
"preallocated" area which is [@old_size, @offset), not
[@offset, offset * 2 - @old_size).
Signed-off-by: Fam Zheng <famz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This brings the request handling logic inline with write and discard,
fixing write_gen, resize_cb, dirty bitmaps and image size refreshing.
The last of these issues broke iotest case 222, which is now fixed.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reuse the new bdrv_co_write_req_prepare/finish helpers. The variation
here is that discard requests don't affect bs->wr_highest_offset, and it
cannot extend the image.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
It was accidently added before MIG_CMD_PACKAGED so it might break
command compatibility when we run postcopy migration between old/new
QEMUs. Fix that up quickly before the QEMU 3.0 release.
Reported-by: Lukáš Doktor <ldoktor@redhat.com>
Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710094424.30754-1-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We dumped something when network failure happens. We should avoid those
messages to be dumped when running the tests:
$ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
/x86_64/migration/postcopy/recovery: qemu-system-x86_64: check_section_footer: Read section footer failed: -5
qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
qemu-system-x86_64: Detected IO failure for postcopy. Migration paused.
OK
After the patch:
$ ./tests/migration-test -p /x86_64/migration/postcopy/recovery
/x86_64/migration/postcopy/recovery: OK
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-11-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Test the postcopy recovery procedure by emulating a network failure
using migrate-pause command.
Tested-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-10-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
It's generalized from wait_for_migration_complete() to allow us to wait
for any migration status besides failure.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-9-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Introduce helpers to query migration states and use it.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-8-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
For example, we can pass in '"resume": true' to resume a migration.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-7-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Separate the old postcopy UNIX socket test into three steps, provide a
helper for each step. With these helpers, we can do more compliated
tests like postcopy recovery, while keep the codes shared.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Balamuruhan S <bala24@linux.vnet.ibm.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-6-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix up merge with 2e295789 / Skip tests for ppc tcg
Two problems exist when a write request that enlarges the image (i.e.
write beyond EOF) finishes:
1) parent is not notified about size change;
2) dirty bitmap is not resized although we try to set the dirty bits;
Fix them just like how bdrv_co_truncate works.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
As a mechanical refactoring patch, this is the first step towards
unified and more correct write code paths. This is helpful because
multiple BlockDriverState fields need to be updated after modifying
image data, and it's hard to maintain in multiple places such as copy
offload, discard and truncate.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This matches the types used for bytes in the rest parts of block layer.
In the case of bdrv_co_truncate, new_bytes can be the image size which
probably doesn't fit in a 32 bit int.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Other I/O functions are already using a BdrvChild pointer in the API, so
make discard do the same. It makes it possible to initiate the same
permission checks before doing I/O, and much easier to share the
helper functions for this, which will be added and used by write,
truncate and copy range paths.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A few trace points that can help reveal what is happening in a copy
offloading I/O path.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
With in one module, trace points usually have a common prefix named
after the module name. paio_submit and paio_submit_co are the only two
trace points so far in the two file protocol drivers. As we are adding
more, having a common prefix here is better so that trace points can be
enabled with a glob. Rename them.
Suggested-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit a7aff6dd10.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit eae3bd1eb7.
Reverted to avoid conflicts for geometry options revert.
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit b008326744.
Hold off removing this for one more QEMU release (current libvirt
release still uses it.)
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit 6266e900b8.
Some deprecated -drive options were still in use by libvirt, only
fixed with libvirt commit b340c6c614 ("qemu: format serial and geometry
on frontend disk device"), which is not yet in any released version
of libvirt.
So let's hold off removing the deprecated options for one more QEMU
release.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
These two states will be missing when doing "query-migrate" on
destination VM. Add these states so that we can get the query results
as expected.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-5-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The calculation on size of received bitmap is incorrect for postcopy
recovery. Here we wanted to let the size to cover all the valid bits in
the bitmap, we should use DIV_ROUND_UP() instead of a division.
For example, a RAMBlock with size=4K (which contains only one single 4K
page) will have nbits=1, then nbits/8=0, then the real bitmap won't be
sent to source at all.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-4-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
We were checking against -EIO, assuming that it will cover all IO
failures. But actually it is not. One example is that in
qemu_loadvm_section_start_full() we can have tons of places that will
return -EINVAL even if the error is caused by IO failures on the
network.
Let's loosen the recovery check logic here to cover all the error cases
happened by removing the explicit check against -EIO. After all we
won't lose anything here if any other failure happened.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-3-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Firstly, renaming the old matching_page_sizes variable to
matches_target_page_size, which suites more to what it did (it only
checks against target page size rather than multiple page sizes).
Meanwhile, simplify the check logic a bit, and enhance the comments.
Should have no functional change.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180710091902.28780-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
This is the 2nd patch to unbreak postcopy recovery.
Let's unify the migration_incoming_process() call at a single place
rather than calling it in connection setup codes. This fixes a problem
that we will go into incoming migration procedure even if we are trying
to recovery from a paused postcopy migration.
Fixes: 36c2f8be2c ("migration: Delay start of migration main routines")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-5-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The whole postcopy recovery logic was accidentally broken. We need to
fix it in two steps.
This is the first step that we should do the recovery when needed. It
was bypassed before after commit 36c2f8be2c.
Introduce postcopy_try_recovery() helper for the postcopy recovery
logic. Call it both in migration_fd_process_incoming() and
migration_ioc_process_incoming().
Fixes: 36c2f8be2c ("migration: Delay start of migration main routines")
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-4-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Move the call to migration_incoming_process() out of multifd code. It's
a bit strange that we can migration generic calls in multifd code.
Instead, let multifd_recv_new_channel() return a boolean showing whether
it's ready to continue the incoming migration.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Before this patch we firstly setup the postcopy-paused state then we
clean up the QEMUFile handles. That can be racy if there is a very fast
"migrate-recover" command running in parallel. Fix that up.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20180627132246.5576-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
The sector size needs to be large enough to accommodate the data
structures for the log super block and log write entries. This was
previously not properly checked, which made it possible to cause
QEMU to badly misbehave.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This was accidentally omitted. Thanks to Eric Blake for spotting this.
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fleecing scheme works as follows: we want a kind of temporary snapshot
of active drive A. We create temporary image B, with B->backing = A.
Then we start backup(sync=none) from A to B. From this point, B reads
as point-in-time snapshot of A (A continues to be active drive,
accepting guest IO).
This scheme needs some additional synchronization between reads from B
and backup COW operations, otherwise, the following situation is
theoretically possible:
(assume B is qcow2, client is NBD client, reading from B)
1. client starts reading and take qcow2 mutex in qcow2_co_preadv, and
goes up to l2 table loading (assume cache miss)
2) guest write => backup COW => qcow2 write =>
try to take qcow2 mutex => waiting
3. l2 table loaded, we see that cluster is UNALLOCATED, go to
"case QCOW2_CLUSTER_UNALLOCATED" and unlock mutex before
bdrv_co_preadv(bs->backing, ...)
4) aha, mutex unlocked, backup COW continues, and we finally finish
guest write and change cluster in our active disk A
5. actually, do bdrv_co_preadv(bs->backing, ...) and read
_new updated_ data.
To avoid this, let's make backup writes serializing, to not intersect
with reads from B.
Note: we expand range of handled cases from (sync=none and
B->backing = A) to just (A in backing chain of B), to finally allow
safe reading from B during backup for all cases when A in backing chain
of B, i.e. B formally looks like point-in-time snapshot of A.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Serialized writes should be used in copy-on-write of backup(sync=none)
for image fleecing scheme.
We need to change an assert in bdrv_aligned_pwritev, added in
28de2dcd88. The assert may fail now, because call to
wait_serialising_requests here may become first call to it for this
request with serializing flag set. It occurs if the request is aligned
(otherwise, we should already set serializing flag before calling
bdrv_aligned_pwritev and correspondingly waited for all intersecting
requests). However, for aligned requests, we should not care about
outdating of previously read data, as there no such data. Therefore,
let's just update an assert to not care about aligned requests.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Pass read flags and write flags separately. This is needed to handle
coming BDRV_REQ_NO_SERIALISING clearly in following patches.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Here two things are fixed:
1. Architecture
On each recursion step, we go to the child of src or dst, only for one
of them. So, it's wrong to create tracked requests for both on each
step. It leads to tracked requests duplication.
2. Wait for serializing requests on write path independently of
BDRV_REQ_NO_SERIALISING
Before commit 9ded4a0114 "backup: Use copy offloading",
BDRV_REQ_NO_SERIALISING was used for only one case: read in
copy-on-write operation during backup. Also, the flag was handled only
on read path (in bdrv_co_preadv and bdrv_aligned_preadv).
After 9ded4a0114, flag is used for not waiting serializing operations
on backup target (in same case of copy-on-write operation). This
behavior change is unsubstantiated and potentially dangerous, let's
drop it and add additional asserts and documentation.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Luks needs special parameters to operate the image. Since this test is
focusing on image fleecing, skip skip that format.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For M-profile exception returns, the mmu index to use for exception
return unstacking is supposed to be that of wherever we are returning to:
* if returning to handler mode, privileged
* if returning to thread mode, privileged or unprivileged depending on
CONTROL.nPRIV for the destination security state
We were passing the wrong thing as the 'priv' argument to
arm_v7m_mmu_idx_for_secstate_and_priv(). The effect was that guests
which programmed the MPU to behave differently for privileged and
unprivileged code could get spurious MemManage Unstack exceptions.
Reported-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20180709124535.1116-1-peter.maydell@linaro.org
If the virtual disk size isn't aligned to full clusters,
bdrv_co_do_copy_on_readv() may get pnum == 0 before having the full
cluster completed, which will let it run into an assertion failure:
qemu-io: block/io.c:1203: bdrv_co_do_copy_on_readv: Assertion `skip_bytes < pnum' failed.
Check for EOF, assert that we read at least as much as the read request
originally wanted to have (which is true at EOF because otherwise
bdrv_check_byte_request() would already have returned an error) and
return success early even though we couldn't copy the full cluster.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit dcf94a23b1 ('block: Don't poll in parent drain callbacks')
removed polling in bdrv_child_cb_drained_begin() on the grounds that the
original bdrv_drain() already will poll and BdrvChildRole.drained_begin
calls must not cause graph changes (and therefore must not call
aio_poll() or the recursion through the graph will break.
This reasoning is correct for calls through bdrv_do_drained_begin().
However, BdrvChildRole.drained_begin is also called when a node that is
already in a drained section (i.e. bdrv_do_drained_begin() has already
returned and therefore can't poll any more) is attached to a new parent.
In this case, we must explicitly poll to have all requests completed
before the drained new child can be attached to the parent.
In bdrv_replace_child_noperm(), we know that we're not inside the
recursion of bdrv_do_drained_begin() because graph changes are not
allowed there, and bdrv_replace_child_noperm() is a graph change. The
call of BdrvChildRole.drained_begin() must therefore be followed by a
BDRV_POLL_WHILE() that waits for the completion of requests.
Reported-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This new test verifies that VMDK backing file reads fail when the
backing file has a non-matching CID. This includes non-VMDK backing
files.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Message-id: 20180702210721.4847-3-mreitz@redhat.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
