Remove the limitation that the VNC server can only listen on
a single resolved IP address. This uses the new DNS resolver
API to resolve a SocketAddress struct into an array of
SocketAddress structs containing raw IP addresses. The VNC
server will then attempt to listen on all resolved IP addresses.
The server must successfully listen on at least one of the
resolved IP addresses, otherwise an error will be reported.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-7-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code which takes a SocketAddress and connects/listens on the
network is going to get more complicated to deal with multiple
listeners. Pull it out into a separate method to avoid making the
vnc_display_open method even more complex.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-6-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The code which interprets the CLI args to populate the SocketAddress
objects for plain & websockets VNC is quite complex already and will
need further enhancements shortly. Refactor it into separate methods
to avoid vnc_display_open getting even larger. As a side effect of
the refactoring, it is now possible to specify a listen address for
the websocket server explicitly. e.g,
-vnc localhost:5900,websockets=0.0.0.0:8080
will listen on localhost for the plain VNC server, but expose the
websockets VNC server on the public interface. This refactoring
also removes the restriction that prevents enabling websockets
when the plain VNC server is listening on a UNIX socket.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-5-berrange@redhat.com
[ kraxel: squashed clang build fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently there is only a single listener for plain VNC and
a single listener for websockets VNC. This means that if
getaddrinfo() returns multiple IP addresses, for a hostname,
the VNC server can only listen on one of them. This is
just bearable if listening on wildcard interface, or if
the host only has a single network interface to listen on,
but if there are multiple NICs and the VNC server needs
to listen on 2 or more specific IP addresses, it can't be
done.
This refactors the VncDisplay state so that it holds an
array of listening sockets, but still only listens on
one socket.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-4-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently the VNC authentication info is emitted at the
top level of the query-vnc-servers data. This is wrong
because the authentication scheme differs between plain
and websockets when TLS is enabled. We should instead
report auth against the individual servers. e.g.
(QEMU) query-vnc-servers
{
"return": [
{
"clients": [],
"id": "default",
"auth": "vencrypt",
"vencrypt": "x509-vnc",
"server": [
{
"host": "127.0.0.1"
"service": "5901",
"websocket": false,
"family": "ipv4",
"auth": "vencrypt",
"vencrypt": "x509-vnc"
},
{
"host": "127.0.0.1",
"service": "5902",
"websocket": true,
"family": "ipv4",
"auth": "vnc"
}
]
}
]
}
This also future proofs the QMP schema so that we can
cope with multiple VNC server instances, listening on
different interfaces or ports, with different auth
setup.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-3-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The -vnc argument is documented as accepting two syntaxes for
the 'websocket' option, either a bare option name, or a port
number. If using the bare option name, it is supposed to apply
the display number as an offset to base port 5700. e.g.
-vnc localhost:3,websocket
should listen on port 5703, however, this was broken in 2.3.0 since
commit 4db14629c3
Author: Gerd Hoffmann <kraxel@redhat.com>
Date: Tue Sep 16 12:33:03 2014 +0200
vnc: switch to QemuOpts, allow multiple servers
instead qemu tries to listen on port "on" which gets looked up in
/etc/services and fails.
Fixes bug: #1455912
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20170203120649.15637-2-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When qemu vnc server is trying to send large update to clients,
there might be a situation when system responds with something
like EAGAIN, indicating that there's no system memory to send
that much data (depending on the network speed, client and server
and what is happening). In this case, something like this happens
on qemu side (from strace):
sendmsg(16, {msg_name(0)=NULL,
msg_iov(1)=[{"\244\"..., 729186}],
msg_controllen=0, msg_flags=0}, 0) = 103950
sendmsg(16, {msg_name(0)=NULL,
msg_iov(1)=[{"lz\346"..., 1559618}],
msg_controllen=0, msg_flags=0}, 0) = -1 EAGAIN
sendmsg(-1, {msg_name(0)=NULL,
msg_iov(1)=[{"lz\346"..., 1559618}],
msg_controllen=0, msg_flags=0}, 0) = -1 EBADF
qemu closes the socket before the retry, and obviously it gets EBADF
when trying to send to -1.
This is because there WAS a special handling for EAGAIN, but now it doesn't
work anymore, after commit 04d2529da2, because
now in all error-like cases we initiate vnc disconnect.
This change were introduced in qemu 2.6, and caused numerous grief for many
people, resulting in their vnc clients reporting sporadic random disconnects
from vnc server.
Fix that by doing the disconnect only when necessary, i.e. omitting this
very case of EAGAIN.
Hopefully the existing condition (comparing with QIO_CHANNEL_ERR_BLOCK)
is sufficient, as the original code (before the above commit) were
checking for other errno values too.
Apparently there's another (semi?)bug exist somewhere here, since the
code tries to write to fd# -1, it probably should check if the connection
is open before. But this isn't important.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 1486115549-9398-1-git-send-email-mjt@msgid.tls.msk.ru
Fixes: 04d2529da2
Cc: Daniel P. Berrange <berrange@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The functions vnc_has_job() and vnc_jobs_clear() are
never used; remove them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1486146260-8092-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* new "unimplemented" device for stubbing out devices in a
system model so accesses can be logged
* stellaris: document the SoC memory map
* arm: create instruction syndromes for AArch32 data aborts
* arm: Correctly handle watchpoints for BE32 CPUs
* Fix Thumb-1 BE32 execution and disassembly
* arm: Add cfgend parameter for ARM CPU selection
* sd: sdhci: check data length during dma_memory_read
* aspeed: add a watchdog controller
* integratorcp: adding vmstate for save/restore
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dbln
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20170207-1' into staging
target-arm:
* new "unimplemented" device for stubbing out devices in a
system model so accesses can be logged
* stellaris: document the SoC memory map
* arm: create instruction syndromes for AArch32 data aborts
* arm: Correctly handle watchpoints for BE32 CPUs
* Fix Thumb-1 BE32 execution and disassembly
* arm: Add cfgend parameter for ARM CPU selection
* sd: sdhci: check data length during dma_memory_read
* aspeed: add a watchdog controller
* integratorcp: adding vmstate for save/restore
# gpg: Signature made Tue 07 Feb 2017 19:20:19 GMT
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20170207-1:
stellaris: Use the 'unimplemented' device for parts we don't implement
hw/misc: New "unimplemented" sysbus device
stellaris: Document memory map and which SoC devices are unimplemented
target/arm: A32, T32: Create Instruction Syndromes for Data Aborts
target/arm: Abstract out pbit/wbit tests in ARM ldr/str decode
arm: Correctly handle watchpoints for BE32 CPUs
Fix Thumb-1 BE32 execution and disassembly.
target/arm: Add cfgend parameter for ARM CPU selection.
hw/arm/integratorcp: Support specifying features via -cpu
sd: sdhci: check data length during dma_memory_read
aspeed: add a watchdog controller
wdt: Add Aspeed watchdog device model
integratorcp: adding vmstate for save/restore
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Use the 'unimplemented' dummy device to cover regions of the
SoC device memory map which we don't have proper device
implementations for yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484247815-15279-4-git-send-email-peter.maydell@linaro.org
Create a new "unimplemented" sysbus device, which simply accepts
all read and write accesses, and implements them as read-as-zero,
write-ignored, with logging of the access as LOG_UNIMP.
This is useful for stubbing out bits of an SoC or board model
which haven't been written yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1484247815-15279-3-git-send-email-peter.maydell@linaro.org
Add support for generating the ISS (Instruction Specific Syndrome)
for Data Abort exceptions taken from AArch32. These syndromes are
used by hypervisors for example to trap and emulate memory accesses.
This is the equivalent for AArch32 guests of the work done for AArch64
guests in commit aaa1f954d4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In the ARM ldr/str decode path, rather than directly testing
"insn & (1 << 21)" and "insn & (1 << 24)", abstract these
bits out into wbit and pbit local flags. (We will want to
do more tests against them to determine whether we need to
provide syndrome information.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
In BE32 mode, sub-word size watchpoints can fail to trigger because the
address of the access is adjusted in the opcode helpers before being
compared with the watchpoint registers. This patch reverses the address
adjustment before performing the comparison with the help of a new CPUClass
hook.
This version of the patch augments and tidies up comments a little.
Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: caaf64ffc72f6ae183015337b7afdbd4b8989cb6.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Thumb-1 code has some issues in BE32 mode (as currently implemented). In
short, since bytes are swapped within words at load time for BE32
executables, this also swaps pairs of adjacent Thumb-1 instructions.
This patch un-swaps those pairs of instructions again, both for execution,
and for disassembly. (The previous version of the patch always read four
bytes in arm_read_memory_func and then extracted the proper two bytes,
in a probably misguided attempt to match the behaviour of actual hardware
as described by e.g. the ARM9TDMI TRM, section 3.3 "Endian effects for
instruction fetches". It's less complicated to just read the correct
two bytes though.)
Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: ca20462a044848000370318a8bd41dd0a4ed273f.1484929304.git.julian@codesourcery.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a new "cfgend" property which selects whether the CPU resets into
big-endian mode or not. This setting affects whether we reset with
SCTLR_B (ARMv6 and earlier) or SCTLR_EE (ARMv7 and later) set.
Signed-off-by: Julian Brown <julian@codesourcery.com>
Message-id: 11420d1c49636c1790e60578ee996e51f0f0b835.1484929304.git.julian@codesourcery.com
[PMM: use error_report_err() rather than error_report();
move the integratorcp changes to their own patch;
drop an unnecessary extra #include;
rephrase commit message accordingly;
move setting of reset_sctlr above registration of cpregs
so it actually has an effect]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Since the integratorcp board creates the CPU object directly
rather than via cpu_arm_init(), we have to call the CPU
class parse_features() method ourselves if we want to
support the user passing features via the -cpu command
line argument as well as just the cpu name. Do so.
Signed-off-by: Julian Brown <julian@codesourcery.com>
[PMM: split out into its own patch]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While doing multi block SDMA transfer in routine
'sdhci_sdma_transfer_multi_blocks', the 's->fifo_buffer' starting
index 'begin' and data length 's->data_count' could end up to be same.
This could lead to an OOB access issue. Correct transfer data length
to avoid it.
Cc: qemu-stable@nongnu.org
Reported-by: Jiang Xin <jiangxin1@huawei.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 20170130064736.9236-1-ppandit@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This enables reboot of a guest from U-Boot and Linux.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Message-id: 1485452251-1593-3-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The Aspeed SoC includes a set of watchdog timers using 32-bit
decrement counters, which can be based either on the APB clock or
a 1 MHz clock.
The watchdog timer is designed to prevent system deadlock and, in
general, it should be restarted before timeout. When a timeout occurs,
different types of signals can be generated, ARM reset, SOC reset,
System reset, CPU Interrupt, external signal or boot from alternate
block. The current model only performs the system reset function as
this is used by U-Boot and Linux.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Message-id: 1485452251-1593-2-git-send-email-clg@kaod.org
[clg: - fixed compile breakage
- fixed io region size
- added watchdog_perform_action() on timer expiry
- wrote a commit log
- merged fixes from Andrew Jeffery to scale the reload value ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VMState added by this patch preserves correct
loading of the integratorcp device state.
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Message-id: 20170131114310.6768.79416.stgit@PASHA-ISP
[PMM: removed unnecessary minimum_version_id_old lines]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In
commit ba78db44f6
Author: Daniel P. Berrange <berrange@redhat.com>
Date: Wed Jan 25 16:14:10 2017 +0000
make: move top level dir to end of include search path
The dir $(BUILD_DIR)/$(@D) was added to the include
path. This would sometimes point to a non-existant
directory, if the sub-dir in question did not contain
any target-independant files (eg tcg/). To deal with
this the rules.mak attempted to create the directory.
While this was succesful, it also caused accidental
creation of files in the parent of the build dir.
e.g. when building common source files into target
specific output files.
Rather than trying to workaround this, just revert
the code that attempted to mkdir the missing include
directories. Instead just turn off the compiler warning
in question as the missing dir is expected & harmless
in general.
NB: you can clean up a build directory parent that has
been filled with empty directories by commit ba78db44f6
using this GNU find command in that parent directory:
find audio backends block chardev crypto disas fsdev hw io linux-user \
migration nbd net qapi qom replay slirp target ui util \
-type d -empty -delete
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Tested-by: Alberto Garcia <berto@igalia.com>
[PMM: added note about how to clean up a polluted directory]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
the correct UTS machine name (as expected by systemd) is "parisc",
not "hppa".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20170126080449.28255-4-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
apt-get was hanging on linux-user hppa.
strace has shown the netlink data stream was not correctly byte swapped.
It appears the fd translator function is unregistered just after it
has been registered, so the translator function is not called.
This patch removes the fd_trans_unregister() after the do_socket()
in the TARGET_NR_socket case.
This fd_trans_unregister() was added by commit
e36800c linux-user: add signalfd/signalfd4 syscalls
when do_socket() was not registering any fd translator.
And as now it is, we must remove this fd_trans_unregister() to keep them.
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Message-Id: <20170126080449.28255-3-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
As we have now a linux-user HPPA target, we can add it to the list of
supported targets in qemu-binfmt-conf.sh
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-Id: <20170126080449.28255-2-laurent@vivier.eu>
Signed-off-by: Richard Henderson <rth@twiddle.net>
An early postcopy failure can be recovered from as long as we know
we haven't sent the command to run the destination.
We have to undo the bdrv_inactivate_all by calling
bdrv_invalidate_cache_all
Note that I'm not using ms->block_inactive because once we've
sent the postcopy package we dont want anything else to try
and recover the block storage on the source; the destination
might have started writing to it.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170202155909.31784-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
On a destination host with no userfault support an incoming
postcopy would cause the state to enter ADVISE before
it realised there was no support, and because it was in ADVISE
state it would perform a cleanup at the end. Since there
was no support the cleanup function should be unreachable,
but ends up being called and asserting.
Reset the state when we realise we have no support, thus the
cleanup doesn't happen.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20170202155909.31784-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Check qdev's call to vmstate_register_with_alias_id; that gets
most of the common uses; there's hundreds of calls via vmstate_register
which could get fixed over time.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-4-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The qdev id of a device can be huge if it's on the end of a chain
of bridges; in reality such chains shouldn't occur but they can
be made to by chaining PCIe bridges together.
The migration format has a number of 256 character long format
limits; check we don't hit them (we already use pstrcat/cpy but
that just protects us from buffer overruns, we fairly quickly
hit an assert).
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-3-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
I'll be adding an error to it in a subsequent patch.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20170202125956.21942-2-dgilbert@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <1485207141-1941-3-git-send-email-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The qemu xhci emulation doesn't handle the ERDP_EHB flag correctly.
When the host adapter queues a new event the ERDP_EHB flag is set. The
flag is cleared (via w1c) by the guest when it updates the ERDP (event
ring dequeue pointer) register to notify the host adapter which events
it has fetched.
An IRQ must be raised in case the ERDP_EHB flag flips from clear to set.
If the flag is set already (which implies there are events queued up
which are not yet processed by the guest) xhci must *not* raise a IRQ.
Qemu got that wrong and raised an IRQ on every event, thereby generating
spurious interrupts in case we've queued events faster than the guest
processed them. This patch fixes that.
With that change in place we also have to check ERDP updates, to see
whenever the guest has fetched all queued events. In case there are
still pending events set ERDP_EHB and raise an IRQ again, to make sure
the events don't linger unseen forever.
The linux kernel driver and the microsoft windows driver (shipped with
win8+) can deal with the spurious interrupts without problems. The
renesas windows driver (v2.1.39) which can be used on older windows
versions is quite upset though. It does spurious ERDP updates now and
then (not every time, seems we must hit a race window for this to
happen), which in turn makes the qemu xhci emulation think the event
ring is full. Things go south from here ...
tl;dr: This is the "fix xhci on win7" patch.
Cc: M.Cerveny@computer.org
Cc: 1373228@bugs.launchpad.net
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1486104705-13761-1-git-send-email-kraxel@redhat.com
This makes some cleanups that are a start on allowing ISA to be
compiled out for platforms which don't use it.
I posted this series last November, and it collected a number of R-bs
and no apparent objections. So, I've now rebased it (trivially) and
am sending a pull request in the hopes of merge. A lot of the pieces
here don't have a clear maintainer, so I'm sending it directly to
Peter.
Notes:
* Patch 3/3 triggers a style warning, but that's just because I'm
moving a C++ // comment verbatim from one file to another
Changes since v2:
* Trivial rebase
Changes since v1:
* Fixed some silly compile errors in 3/3 exposed by some
changes in other headers
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABCAAGBQJYl9NuAAoJEGw4ysog2bOScQ0P/iHg9XVMOCr6E4YLxHN0bagB
vLRCYVkUDeucMSZ7ARyIUR/Cp8uQGtTPpukcyscX7/1nim+n/FVWnW4noDeptauk
PjtPdOydu3Ml9lFtTGkpEUOrUrViVEWrDH0NScLECSKFdACtokfF30T2iYo1oPuG
A6UCurn4zeS75iMsFXK+i871wiQtGFN1B/liE67SJ39K7vqHmNc7lyn/WUXtr0X0
eQwHcFxiPDjR/pssAv1naUs6NBnbvb/iHpqUlUAhxeiBJ02DQ9qV2lb/XJaly/NZ
SFg++ij4XDWT5aZbee9COmonUjwcKrj0W+vwAbWLOnG/HviGwDkzAGhbLgtfsIPt
J/XZDuLUm9GSS+lW7pqmrW7G0R6zh43nxD+jJiFh2V+aqSmIxFoRAAAo8ft0y0QW
JdclrCCfJwmYmS27xtpl6J0lQfwP7w/ta5anx6ohBwR8sma9zBz/QqC6jP+QY18h
qLsYvVwXhCKMzNUONED5zCTm30j4Lpdcn1xwA544EyeN8NUUzgjUgvzl/wEt7P/l
Icnd8uMjCRn9ZCxDdjIOP7QkFFwo/3QoQoOcRspNIEwBHVnuJFBLwFRIa+27txFE
GZKqMIzgRVf7QbwR+wZwutJgIJ7xXoviHm2I8k2L0epyB1kiU+mSywg0l/3DmB5q
IlhUpHpWEVO2oxwWwm/p
=87oO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/isa-cleanup-20170206' into staging
Allow ISA to be disabled on some platforms (v3)
This makes some cleanups that are a start on allowing ISA to be
compiled out for platforms which don't use it.
I posted this series last November, and it collected a number of R-bs
and no apparent objections. So, I've now rebased it (trivially) and
am sending a pull request in the hopes of merge. A lot of the pieces
here don't have a clear maintainer, so I'm sending it directly to
Peter.
Notes:
* Patch 3/3 triggers a style warning, but that's just because I'm
moving a C++ // comment verbatim from one file to another
Changes since v2:
* Trivial rebase
Changes since v1:
* Fixed some silly compile errors in 3/3 exposed by some
changes in other headers
# gpg: Signature made Mon 06 Feb 2017 01:37:50 GMT
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/isa-cleanup-20170206:
Split ISA and sysbus versions of m48t59 device
Allow ISA bus to be configured out
Split serial-isa into its own config option
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
CCID device emulator uses Application Protocol Data Units(APDU)
to exchange command and responses to and from the host.
The length in these units couldn't be greater than 65536. Add
check to ensure the same. It'd also avoid potential integer
overflow in emulated_apdu_from_guest.
Reported-by: Li Qiang <liqiang6-s@360.cn>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 20170202192228.10847-1-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
xhci_submit and xhci_fire_ctl_transfer are is called from
xhci_kick_epctx processing loop only, so there is no need to call
xhci_kick_epctx make sure processing continues. Also eecursive calls
into xhci_kick_epctx can cause trouble.
Drop the xhci_kick_epctx calls.
Cc: 1653384@bugs.launchpad.net
Fixes: 94b037f2a4
Reported-by: Fabian Lesniak <fabian@lesniak-it.de>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485790607-31399-4-git-send-email-kraxel@redhat.com
Make clear that this isn't guaranteed to actually complete the transfer,
the usb packet can still be in flight after calling that function.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485790607-31399-3-git-send-email-kraxel@redhat.com
Windows 10 reportedly sends these, so accept them in case
the device in question is a superspeed (usb3) device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485870727-21956-2-git-send-email-kraxel@redhat.com
Print some more details in case we get a unknown
control request, to ease trouble-shooting.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1485870727-21956-1-git-send-email-kraxel@redhat.com
1. Set bInterfaceProtocol to 0x00 for usb-tablet. This should be
non-zero for boot protocol devices only, which the usb-tablet is not.
2. Set the usb-tablet's usage to "mouse" in the report descriptor.
The boot protocol of 0x02 specifically confused OS X/macOS' HID driver
stack, causing it to generate additional bogus HID events with relative
motion in addition to the tablet's absolute coordinate events.
Absolute pointing devices with HID Report Descriptor usage of 0x01
(pointing) are treated by the macOS HID driver as analog sticks, and
absolute coordinates are not directly translated to absolute mouse
cursor positions. Changing it to 0x02 (mouse) fixes the problem, and
does not have any adverse effect in other operating systems and
windowing systems. (VMWare does the same thing.)
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-id: 1485365075-32702-1-git-send-email-phil@philjordan.eu
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The m48t59 device supports both ISA and direct sysbus attached versions of
the device in the one .c file. This can be awkward for some embedded
machine types which need the sysbus M48T59, but don't want to pull in the
ISA bus code and its other dependencies.
Therefore, this patch splits out the code for the ISA attached M48T59 into
its own C file. It will be built when both CONFIG_M48T59 and
CONFIG_ISA_BUS are enabled.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Currently, the code to handle the legacy ISA bus is always included in
qemu. However there are lots of platforms that don't include ISA legacy
devies, and quite a few that have never used ISA legacy devices at all.
This patch allows the ISA bus code to be disabled in the configuration for
platforms where it doesn't make sense.
For now, the default configs are adjusted to include ISA on all platforms
including PCI: anything with PCI can at least in principle add an i82378
PCI->ISA bridge. Also, CONFIG_IDE_CORE which is already in pci.mak
requires ISA support.
We also explicitly enable ISA on some other non-PCI platforms which include
ISA devices: moxie, sparc and unicore32. We may want to pare this down in
future.
The platforms that will lose ISA by default are: cris, lm32, microblazeel,
microblaze, openrisc, s390x, tricore, xtensaeb, xtensa. As far as I can
tell none of these ever used ISA.
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
At present, the core device model code for 8250-like serial ports
(serial.c) and the code for serial ports attached to ISA-style legacy IO
(serial-isa.c) are both controlled by the CONFIG_SERIAL variable.
There are lots and lots of embedded platforms that have 8250-like serial
ports but have never had anything resembling ISA legacy IO. Therefore,
split serial-isa into its own CONFIG_SERIAL_ISA option so it can be
disabled for platforms where it's not appropriate.
For now, I enabled CONFIG_SERIAL_ISA in every default-config where
CONFIG_SERIAL is enabled, excepting microblaze, or32, and xtensa. As best
as I can tell, those platforms never used legacy ISA, and also don't
include PCI support (which would allow connection of a PCI->ISA bridge
and/or a southbridge including legacy ISA serial ports).
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
