The qemu-img, qemu-nbd and qemu-io tools are built conditionally
based on whether any softmmu target is enabled. These are useful
self-contained tools which can be used in many other scenarios.
Add new --enable-tools/--disable-tools args to configure to allow
the user to explicitly turn on / off their build. The default
behaviour is now to build these tools are all times, regardless
of whether any softmmu target is enabled
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow passing of '--target-list=' to configure to request that
all targets are to be disabled. This allows for doing a very
fast tools-only build of things like qemu-img, qemu-io, qemu-nbd.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch makes rtc_set_time and rtc_set_cmos work without reading
s->current_tm. In the case of rtc_set_time I introduce a new
function that retrieves the time and stores into a given struct tm
(not hard-coded to s->current_tm). In the case of rtc_set_cmos, the
current time is similarly taken from a struct tm rather than
s->current_tm.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch limits further the usage of a periodic timer. It computes the
time of the next alarm, and uses it to skip all intermediate occurrences
of the timer.
Cc: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The first update cycle begins one-half seconds after divider
reset is removed. This feature is useful for testing.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Calculate guest RTC based on the time of the last update, instead of
using timers. The formula is
(base_rtc + guest_time_now - guest_time_last_update + offset)
Base_rtc is the RTC value when the RTC was last updated.
Guest_time_now is the guest time when the access happens.
Guest_time_last_update was the guest time when the RTC was last updated.
Offset is used when divider reset happens or the set bit is toggled.
The timer is kept in order to signal interrupts, but it only needs to
run when either UF or AF is cleared. When the bits are both set, the
timer does not run.
UIP is now synthesized when reading register A. If the timer is not set,
or if there is more than one second before it (as is the case at the
end of this series), the leading edge of UIP is computed and the rising
edge occurs 220us later. If the update timer occurs within one second,
however, the rising edge of the AF and UF bits should coincide withe
the falling edge of UIP. We do not know exactly when this will happen
because there could be delays in the servicing of the timer. Hence, in
this case reading register A only computes for the rising edge of UIP,
and latches the bit until the timer is fired and clears it.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Also, for consistency with other occurrences, implement VMSTATE_TIMER
as a special case of VMSTATE_TIMER_V rather than VMSTATE_TIMER_TEST.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
If an interrupt flag is already set when the interrupt becomes enabled,
raise an interrupt immediately, and vice versa if interrupts become
disabled.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Changing the DM (binary/BCD) and 24/12 control bit doesn't affect the internal
registers. It only indicates what format is used for those registers.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* qemu-kvm/uq/master:
kvm: i386: Add classic PCI device assignment
kvm: i386: Add services required for PCI device assignment
kvm: Introduce kvm_has_intx_set_mask
kvm: Introduce kvm_irqchip_update_msi_route
kvm: Clean up irqfd API
qemu: Use valgrind annotations to mark kvm guest memory as defined
* mst/tags/for_anthony:
vhost: Pass device path to vhost_dev_init()
monitor: Rename+move net_handle_fd_param -> monitor_handle_fd_param
pcie_aer: clear cmask for Advanced Error Interrupt Message Number
pcie: drop version_id field for live migration
qemu: add .exrc
Commit c3767ed0eb introduced a possible SEGV when
using a socket chardev with server=on because it assumes that all TCP sockets
are in client mode.
This patch adds a check to only reconnect when in client mode.
Cc: Lei Li <lilei@linux.vnet.ibm.com>
Reported-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 7b93fadf3a "Add basic version
of bridge helper" put the bridge helper executable into a fixed
${prefix}/libexec/ location, instead of using ${libexecdir} for
this. At the same time, --libexecdir is being happily ignored
by ./configure. Even more, the same patch sets unused $libexecdir
variable in the generated config-host.mak, and uses fixed string
(\${prefix}/libexecdir) for the bridge helper binary.
Fix this braindamage by introducing $libexecdir variable, using
it for the bridge helper binary, and recognizing --libexecdir.
This patch is applicable to stable-1.1.
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Corey Bryant <coreyb@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Cc: Corey Bryant <coreyb@linux.vnet.ibm.com>
Cc: Richa Marwaha <rmarwah@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* 'spice.v59' of git://anongit.freedesktop.org/spice/qemu:
Remove #ifdef QXL_COMMAND_FLAG_COMPAT_16BPP
qxl: Add set_client_capabilities() interface to QXLInterface
spice: make number of surfaces runtime-configurable.
configure: print spice-protocol and spice-server versions
qxl: add QXL_IO_MONITORS_CONFIG_ASYNC
qxl: disallow unknown revisions
qxl/update_area_io: guest_bug on invalid parameters
spice: increase the verbosity of spice section in "qemu --help"
spice: adding seamless-migration option to the command line
spice: add 'migrated' flag to spice info
spice migration: add QEVENT_SPICE_MIGRATE_COMPLETED
spice: notify on vm state change only via spice_server_vm_start/stop
spice: notify spice server on vm start/stop
spice: abort on invalid streaming cmdline params
Report from smatch:
target-arm/helper.c:651 arm946_prbs_read(6) error:
buffer overflow 'env->cp15.c6_region' 8 <= 8
target-arm/helper.c:661 arm946_prbs_write(6) error:
buffer overflow 'env->cp15.c6_region' 8 <= 8
c7_region is an array with 8 elements, so the index must be less than 8.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Report from smatch:
hw/wm8750.c:369 wm8750_tx(12) error: buffer overflow 's->i2c_data' 2 <= 2
It looks like the preprocessor statements were simply misplaced.
Replace also __FUNCTION__ by __func__ to please checkpatch.pl.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
This adds PCI device assignment for i386 targets using the classic KVM
interfaces. This version is 100% identical to what is being maintained
in qemu-kvm for several years and is supported by libvirt as well. It is
expected to remain relevant for another couple of years until kernels
without full-features and performance-wise equivalent VFIO support are
obsolete.
A refactoring to-do that should be done in-tree is to model MSI and
MSI-X support via the generic PCI layer, similar to what VFIO is already
doing for MSI-X. This should improve the correctness and clean up the
code from duplicate logic.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
These helpers abstract the interaction of upcoming pci-assign with the
KVM kernel services. Put them under i386 only as other archs will
implement device pass-through via VFIO and not this classic interface.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Will be used by PCI device assignment code.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This service allows to update an MSI route without releasing/reacquiring
the associated VIRQ. Will be used by PCI device assignment, later on
likely also by virtio/vhost and VFIO.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The load/store slow path has been broken in e141ab52d:
- We need to move 4 registers for store functions and 3 registers for
load functions and not the reverse.
- According to the s390x calling convention the arguments of a function
should be zero extended. This means that the register shift should be
done with TCG_TYPE_I64 to ensure the higher word is correctly zero
extended when needed.
I am aware that CONFIG_TCG_PASS_AREG0 is being removed and thus that
this patch can be improved, but doing so means it can also be applied to
the 1.1 and 1.2 stable branches.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
Add an explicit CPUState parameter instead of relying on AREG0.
Remove temporary wrappers and switch to AREG0 free mode.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fix conflicts]
Signed-off-by: Alexander Graf <agraf@suse.de>
Make misc helpers take a parameter for CPUState instead
of relying on global env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fix conflict]
Signed-off-by: Alexander Graf <agraf@suse.de>
Make condition code helpers take a parameter for CPUState instead
of relying on global env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Make integer helpers take a parameter for CPUState instead
of relying on global env.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Make FPU helpers take a parameter for CPUState instead
of relying on global env.
Introduce temporary wrappers for FPU load and store ops.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Now op_helper.c contains miscellaneous helpers, rename
it to misc_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fix conflict]
Signed-off-by: Alexander Graf <agraf@suse.de>
Move memory access helpers to mem_helper.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
[agraf: fold softmmu include ifdefs together]
Signed-off-by: Alexander Graf <agraf@suse.de>
Move floating point instructions to fpu_helper.c.
While exporting some condition code helpers,
avoid duplicate identifier conflict with translate.c.
Remove unused set_cc_nz_f64() in translate.c.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Before splitting op_helper.c and helper.c in the next patches,
fix style issues. No functional changes.
Replace also GCC specific __FUNCTION__ with
standard __func__.
Don't init static variable (cpu_s390x_init:inited) with 0.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
No need to expose the fd-based interface, everyone will already be fine
with the more handy EventNotifier variant. Rename the latter to clarify
that we are still talking about irqfds here.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
valgrind with kvm produces a big amount of false positives regarding
"Conditional jump or move depends on uninitialised value(s)". This
happens because the guest memory is allocated with qemu_vmalloc which
boils down posix_memalign etc. This function is (correctly) considered
by valgrind as returning undefined memory.
Since valgrind is based on jitting code, it will not be able to see
changes made by the guest to guest memory if this is done by KVM_RUN,
thus keeping most of the guest memory undefined.
Now lots of places in qemu will then use guest memory to change behaviour.
To avoid the flood of these messages, lets declare the whole guest
memory as defined. This will reduce the noise and allows us to see real
problems.
In the future we might want to make this conditional, since there
is actually something that we can use those false positives for:
These messages will point to code that depends on guest memory, so
we can use these backtraces to actually make an audit that is focussed
only at those code places. For normal development we dont want to
see those messages, though.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The old arithmetic assumed 32 physical address bits which is no longer
true for ARM since 3cc0cd61f4.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
fcmp{s,d,q} instructions are supposed to ignore quiet NaN (contrary to
the fcmpe{s,d,q} instructions), but the current code is wrongly setting
the NV exception in that case. Moreover the current code is duplicated:
first the arguments are checked for NaN to generate an exception, and
later in case the comparison is unordered (which can only happens if one
of the argument is a NaN), the same check is done to generate an
exception.
Fix that by calling clear_float_exceptions() followed by
check_ieee_exceptions() as for the other floating point instructions.
Use the _compare_quiet functions for fcmp{s,d,q} and the _compare ones
for fcmpe{s,d,q}. Simplify the flag setting by not clearing a flag that
is set the line just below.
This fix allows the math glibc testsuite to pass.
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Put the following errno value mappings under #ifdef:
xtensa-semi.c: In function 'errno_h2g':
xtensa-semi.c:113: error: 'ENOTBLK' undeclared (first use in this function)
xtensa-semi.c:113: error: (Each undeclared identifier is reported only once
xtensa-semi.c:113: error: for each function it appears in.)
xtensa-semi.c:113: error: array index in initializer not of integer type
xtensa-semi.c:113: error: (near initialization for 'guest_errno')
xtensa-semi.c:124: error: 'ETXTBSY' undeclared (first use in this function)
xtensa-semi.c:124: error: array index in initializer not of integer type
xtensa-semi.c:124: error: (near initialization for 'guest_errno')
xtensa-semi.c:134: error: 'ELOOP' undeclared (first use in this function)
xtensa-semi.c:134: error: array index in initializer not of integer type
xtensa-semi.c:134: error: (near initialization for 'guest_errno')
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Report from smatch:
target-cris/translate.c:3464 cpu_dump_state(32) error:
buffer overflow 'env->sregs' 4 <= 255
sregs is declared 'uint32_t sregs[4][16]', so the first index must be
less than 4 or ARRAY_SIZE(env->sregs).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
This change updates the CPU reset sequence to use a common piece of code
that figures out CPU state flags, fixing the problem with MIPS_HFLAG_COP1X
not being set where applicable that causes floating-point MADD family
instructions (and other instructions from the MIPS IV FP subset) to trap.
As compute_hflags is now shared between op_helper.c and translate.c, the
function is now moved to a common header. There are no changes to this
function.
The problem was seen with the 24Kf MIPS32r2 processor in user emulation.
The new approach prevents system and user emulation from diverging -- all
the hflags state is initialized in one place now.
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The lan9118 emulation tries to compute the multicast index by calling
directly the crc32() function from zlib, but fails to get the correct
result.
Use the common compute_mcast_idx() function instead, which gives the
correct result. This fixes IPv6 support.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Find a hopefully proper patch attached. Take it or leave it.
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Henning Schild <henning@hennsch.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The path to /dev/vhost-net is currently hardcoded in vhost_dev_init().
This needs to be changed so that /dev/vhost-scsi can be used. Pass in
the device path instead of hardcoding it.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch renames+moves the net_handle_fd_param() caller used to
obtain a file descriptor from either qemu_parse_fd() (the normal case)
or from monitor_get_fd() (migration case) into a generically prefixed
monitor_handle_fd_param() to be used by vhost-scsi code.
Also update net/[socket,tap].c consumers to use the new prefix.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Advanced Error Interrupt Message Number (bits 31:27 of the Root
Error Status Register) is updated when the number of msi messages assigned to a
device changes. Migration of windows 7 on q35 chipset failed because the check
in get_pci_config_device() fails due to cmask being set on these bits. Its valid
to update these bits and we must restore this state across migration.
Signed-off-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
