The semun union used in the semctl system call contains both an int (val) and
pointers. In cross-endian situations on 64 bit targets, the value passed to
semctl is an 8 byte (abi_long) value and thus does not have the 4-byte val
field in the correct location. In order to rectify this, the other half
of the union must be accessed. This is achieved in code by performing
a byte swap on the entire 8 byte union, followed by a 4-byte swap of the
first half.
Also, eliminate an extraneous (dead) line of code that sets target_su.val in
the IPC_SET/IPC_GET case.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
When the ipc system call is used to wrap a semctl system call,
the ptr argument to ipc needs to be dereferenced prior to passing
it to the semctl handler. This is because the fourth argument to
semctl is a union and not a pointer to a union.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The 64 bit PowerPC platforms eliminate the _unused1 and _unused2
elements of the semid_ds structure from <sys/sem.h>. So eliminate
these from the target_semid_ds structure.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the setns and unshare syscalls, trivially passed through to
the host. Based on patches by Paul Burton, added configure check.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Add support for the ioprio_get & ioprio_set syscalls, allowing their
use by target programs.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Adds support for the timerfd_create, timerfd_gettime & timerfd_settime
syscalls, allowing use of timerfds by target programs.
v2: By Riku - added configure check for timerfd and ifdefs
for benefit of old distributions like RHEL5.
Signed-off-by: Paul Burton <paul@archlinuxmips.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
The current code always returns the length of the path when it should
be returning the number of bytes it wrote to the output string.
Further, readlink is not supposed to append a NUL byte, but the current
snprintf logic will always do just that.
Even further, if you pass in a length of 0, you're suppoesd to get back
an error (EINVAL), but the current logic just returns 0.
Further still, if there was an error reading the symlink, we should not
go ahead and try to read the target buffer as it is garbage.
Simple test for the first two issues:
$ cat test.c
int main() {
char buf[50];
size_t len;
for (len = 0; len < 10; ++len) {
memset(buf, '!', sizeof(buf));
ssize_t ret = readlink("/proc/self/exe", buf, len);
buf[20] = '\0';
printf("readlink(/proc/self/exe, {%s}, %zu) = %zi\n", buf, len, ret);
}
return 0;
}
Now compare the output of the native:
$ gcc test.c -o /tmp/x
$ /tmp/x
$ strace /tmp/x
With what qemu does:
$ armv7a-cros-linux-gnueabi-gcc test.c -o /tmp/x -static
$ qemu-arm /tmp/x
$ qemu-arm -strace /tmp/x
Signed-off-by: Mike Frysinger <vapier@chromium.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
There were a number of bugs in the conversion of the sigevent
argument to timer_create from target to host format:
* signal number not converted from target to host
* thread ID not copied across
* sigev_value not copied across
* we never unlocked the struct when we were done
Between them, these problems meant that SIGEV_THREAD_ID
timers (and the glibc-implemented SIGEV_THREAD timers which
depend on them) didn't work.
Fix these problems and clean up the code a little by pulling
the struct conversion out into its own function, in line with
how we convert various other structs. This allows the test
program in bug LP:1042388 to run.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Currently syscall instruction is buggy on user mode X86_64,
the EIP is updated after do_syscall(), that is too late for
clone(). Because clone() will create a thread at the env->EIP
(the address of syscall insn), and then child thread enters
do_syscall() again, that is not expected. Sometimes it is tragic.
User mode syscall insn emulation is not used MSR, so the
action should be same to INT 0x80. INT 0x80 will update EIP in
do_interrupt(), ditto for syscall() for consistency.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
While Mikhail fixed /proc/self/maps, it was noticed openat calls are
not redirected currently. Some archs don't have open at all, so
openat needs to be redirected.
Fix this by consolidating open/openat code to do_openat - open
is implemented using openat(AT_FDCWD, ... ), which according
to open(2) man page is identical.
Since all targets now have openat, remove the ifdef around sys_openat
and openat: case in do_syscall.
Cc: Mikhail Ilin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Build /proc/self/maps doing a match against guest memory translation table.
Output only that map records which are valid for guest memory layout.
Signed-off-by: Mikhail Ilyin <m.ilin@samsung.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
QEMU needs to call semctl() for correct operation. This particular
problem was identified on shutdown with the following commandline:
# qemu -sandbox on -monitor stdio \
-device intel-hda -device hda-duplex -vnc :0
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com>
* fix preferred return address for A64 BRK insn
* implement AArch64 single-stepping
* support loading gzip compressed AArch64 kernels
* use correct PSCI function IDs in the DT when KVM uses PSCI 0.2
* minor cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+uR+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/pmaydell/tags/pull-target-arm-20140819' into staging
target-arm:
* fix preferred return address for A64 BRK insn
* implement AArch64 single-stepping
* support loading gzip compressed AArch64 kernels
* use correct PSCI function IDs in the DT when KVM uses PSCI 0.2
* minor cleanups
# gpg: Signature made Tue 19 Aug 2014 19:04:09 BST using RSA key ID 14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
* remotes/pmaydell/tags/pull-target-arm-20140819:
arm: stellaris: Remove misleading address_space_mem var
arm: armv7m: Rename address_space_mem -> system_memory
aarch64: Allow -kernel option to take a gzip-compressed kernel.
loader: Add load_image_gzipped function.
arm: cortex-a9: Fix cache-line size and associativity
arm/virt: Use PSCI v0.2 function IDs in the DT when KVM uses PSCI v0.2
target-arm: Rename QEMU PSCI v0.1 definitions
target-arm: Implement MDSCR_EL1 as having state
target-arm: Implement ARMv8 single-stepping for AArch32 code
target-arm: Implement ARMv8 single-step handling for A64 code
target-arm: A64: Avoid duplicate exit_tb(0) in non-linked goto_tb
target-arm: Set PSTATE.SS correctly on exception return from AArch64
target-arm: Correctly handle PSTATE.SS when taking exception to AArch32
target-arm: Don't allow AArch32 to access RES0 CPSR bits
target-arm: Adjust debug ID registers per-CPU
target-arm: Provide both 32 and 64 bit versions of debug registers
target-arm: Allow STATE_BOTH reginfo descriptions for more than cp14
target-arm: Collect up the debug cp register definitions
target-arm: Fix return address for A64 BRK instructions
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
It's a MemoryRegion and not an AddressSpace. But since it's single use,
just inline the get_system_memory() call to the only usage to remove it.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: d6914047e10b956514cfaa5f391ef56c7d851b34.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This argument is a MemoryRegion and not an AddressSpace.
"Address space" means something quite different to "memory region"
in QEMU parlance so rename the variable to reduce confusion.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: f666cf7f2318d9b461b1e320a45bf0d82da9b7dd.1408347860.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On aarch64 it is the bootloader's job to uncompress the kernel. UEFI
and u-boot bootloaders do this automatically when the kernel is
gzip-compressed.
However the qemu -kernel option does not do this. The following
command does not work:
qemu-system-aarch64 [...] -kernel /boot/vmlinuz
because it tries to execute the gzip-compressed data.
This commit lets gzip-compressed kernels be uncompressed
transparently.
Currently this is only done when emulating aarch64.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-3-git-send-email-rjones@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
As the name suggests this lets you load a ROM/disk image that is
gzipped. It is uncompressed before storing it in guest memory.
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1407831259-2115-2-git-send-email-rjones@redhat.com
[PMM: removed stray space before ')']
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
For A9, The cache associativity is 4 and the lines size is 32B.
Self identify in CCSIDR accordingly. Cache size remains at 16k.
QEMU doesn't emulate caches, but we should still report the correct
cache-line size to the guest. Some guests (like u-boot) complain if
the cache-line size mismatches a requested flush or invalidate
operation.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1de6bd40155a1d2f2e93e24b1b1d1d677a432641.1408346233.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current code supplies the PSCI v0.1 function IDs in the DT even when
KVM uses PSCI v0.2.
This will break guest kernels that only support PSCI v0.1 as they will
use the IDs provided in the DT. Guest kernels with PSCI v0.2 support
are not affected by this patch, because they ignore the function IDs in
the device tree and rely on the architecture definition.
Define QEMU versions of the constants and check that they correspond to
the Linux defines on Linux build hosts. After this patch, both guest
kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should
work.
Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest
only). Both cases tested with 3.14 and linus/master and verified I
could bring up 2 cpus with both guest kernels. Also tested 32-bit with
a 3.14 host kernel with only PSCI v0.1 and both guests booted here as
well.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function IDs for PSCI v0.1 are exported by KVM and defined as
KVM_PSCI_FN_<something>. To build using these defines in non-KVM code,
QEMU defines these IDs locally and check their correctness against the
KVM headers when those are available.
However, the naming scheme used for QEMU (almost) clashes with the PSCI
v0.2 definitions from Linux so to avoid unfortunate naming when we
introduce local PSCI v0.2 defines, rename the current local defines with
QEMU_ prependend and clearly identify the PSCI version as v0.1 in the
defines.
Cc: qemu-stable@nongnu.org
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now that all the new code to support single-stepping is in
place, wire up the guest-visible MDSCR_EL1, so the guest
can enable single-stepping.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
ARMv8 single-stepping requires the exception level that controls
the single-stepping to be in AArch64 execution state, but the
code being stepped may be in AArch64 or AArch32. Implement the
necessary support code for single-stepping AArch32 code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Implement ARMv8 software single-step handling for A64 code:
correctly update the single-step state machine and generate
debug exceptions when stepping A64 code.
This patch has no behavioural change since MDSCR_EL1.SS can't
be set by the guest yet.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
If gen_goto_tb() decides not to link the two TBs, then the
fallback path generates unnecessary code:
* if singlestep is enabled then we generate unreachable code
after the gen_exception_internal(EXCP_DEBUG)
* if singlestep is disabled then we will generate exit_tb(0)
twice, once in gen_goto_tb() and once coming out of the
main loop with is_jmp set to DISAS_JUMP
Correct these deficiencies by only emitting exit_tb() in the
non-singlestep case, in which case we can use DISAS_TB_JUMP
to suppress the main-loop exit_tb().
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Set the PSTATE.SS bit correctly on exception returns from AArch64,
as required by the debug single-step functionality.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
When an exception is taken to AArch32, we must clear the PSTATE.SS
bit for the exception handler, and must also ensure that the SS bit
is not set in the value saved to SPSR_<mode>. Achieve both of these
aims by clearing the bit in uncached_cpsr before saving it to the SPSR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
The CPSR has a new-in-v8 execution state bit (IL), and
also some state which has effects in AArch32 but appears
only in the SPSR format (SS) but is RES0 in the CPSR.
Add the IL bit to CPSR_EXEC, and enforce that guest direct
reads and writes to CPSR can't read or write the RES0
bits, so the guest can't get at the SS bit which we store
in uncached_cpsr. This includes not permitting exception
returns to copy reserved bits from an SPSR into CPSR.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Allow each CPU type to specify the value for the debug ID
registers, by putting them in the ARMCPU struct, and use
the resulting information to only expose the correct number
of watchpoint and breakpoint registers for the CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Bring the 32 bit and 64 bit views of the debug registers into
line by providing the same set of registers in both cases.
(This still isn't a complete set, but it is consistent.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Currently the STATE_BOTH shorthand for allowing a single reginfo struct
to define handling for both AArch32 and AArch64 views of a register
only permits this where the AArch32 view is in cp15. It turns out that
the debug registers in cp14 also have neatly lined up encodings;
allow these also to share reginfo structs by permitting a STATE_BOTH
reginfo to specify the .cp field (and continue to default to 15 if
it is not specified).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
At the moment we have a mixed set of mostly dummy register
definitions for various debug related registers which have
been added piecemeal in order to get Linux kernels to boot.
In preparation for actually implementing debug support,
bring them all together into one place.
This commit doesn't change behaviour: we still expose
exactly the same registers and behaviour to the guest
in all configurations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
When we take an exception resulting from a BRK instruction,
the architecture requires that the "preferred return address"
reported to the exception handler is the address of the BRK
itself, not the following instruction (like undefined
insns, and in contrast with SVC, HVC and SMC). Follow this,
rather than incorrectly reporting the address of the following
insn.
(We do get this correct for the A32/T32 BKPT insns.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Cc: qemu-stable@nongnu.org
Memory changes for QOMification and automatic tracking of MR lifetime.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=M+/m
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
SCSI changes that enable sending vendor-specific commands via virtio-scsi.
Memory changes for QOMification and automatic tracking of MR lifetime.
# gpg: Signature made Mon 18 Aug 2014 13:03:09 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
mtree: remove write-only field
memory: Use canonical path component as the name
memory: Use memory_region_name for name access
memory: constify memory_region_name
exec: Abstract away ref to memory region names
loader: Abstract away ref to memory region names
tpm_tis: remove instance_finalize callback
memory: remove memory_region_destroy
memory: convert memory_region_destroy to object_unparent
ioport: split deletion and destruction
nic: do not destroy memory regions in cleanup functions
vga: do not dynamically allocate chain4_alias
sysbus: remove unused function sysbus_del_io
qom: object: move unparenting to the child property's release callback
qom: object: delete properties before calling instance_finalize
virtio-scsi: implement parse_cdb
scsi-block, scsi-generic: implement parse_cdb
scsi-block: extract scsi_block_is_passthrough
scsi-bus: introduce parse_cdb in SCSIDeviceClass and SCSIBusInfo
scsi-bus: prepare scsi_req_new for introduction of parse_cdb
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function monitor_fdset_dup_fd_find_remove() references member of
'mon_fdset' which - when remove flag is set - may be freed in function
monitor_fdset_cleanup().
remove is set by monitor_fdset_dup_fd_remove which in practice
does not need the returned value, so make it void,
and return -1 from monitor_fdset_dup_fd_find_remove.
Reported-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
In dump_init(), when failure occurs, need notice about 'fd' and memory
mapping. So call dump_cleanup() for it (need let all initializations at
front).
Also simplify dump_cleanup(): remove redundant 'ret' and redundant 'fd'
checking.
Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
* remotes/amit/for-2.2:
virtio-serial: search for duplicate port names before adding new ports
virtio-serial: create a linked list of all active devices
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Before adding new ports to VirtIOSerial devices, check if there's a
conflict in the 'name' parameter. This ensures two virtserialports with
identical names are not initialized.
Reported-by: <mazhang@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
To ensure two virtserialports don't get added to the system with the
same 'name' parameter, we need to access all the ports on all the
devices added, and compare the names.
We currently don't have a list of all VirtIOSerial devices added to the
system. This commit adds a simple linked list in which devices are put
when they're initialized, and removed when they go away.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
* remotes/mcayland/qemu-sparc:
target-sparc64: implement Short Floating-Point Store Instructions
apb: add IOMMU flush register implementation
sun4u: switch second PCI-ebus bridge BAR over to PCI IO space
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT7j2XAAoJEJykq7OBq3PIUL4H/11PwoUewF5hXqbsaTVbxLWK
RdufFsy+31+FjM2JaGbJnGyuzRFOevx3SLllnASkltsC7AV+MlQw0qDfQ9MSvsT4
wotQKEfwApleq7u4wp/zTCyNCDRyPTvIDboG2NB/BqHMjsaar2EX3yacSZ+Bv+WJ
cj2OOK9OlHHy0fycx9POgx3RB+OSNvzPcJ2DaNMuDY/0/ss5i6r2aQOT5bgHFTNU
JCAGYB1MJ1dMBqHnfWdsBHXTliPnYoGyYGTLcE2lHO9VBj1hOw867Iemz9mNLWg5
LTWHLnYZLiUZIzGWlBrtnv4lgLsu2xtZCBuiMgDfl6zZtFhIR36SA1M8pdS2yMA=
=3PII
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 15 Aug 2014 18:04:23 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (55 commits)
qcow2: fix new_blocks double-free in alloc_refcount_block()
image-fuzzer: Reduce number of generator functions in __init__
image-fuzzer: Add generators of L1/L2 tables
image-fuzzer: Add fuzzing functions for L1/L2 table entries
docs: Expand the list of supported image elements with L1/L2 tables
image-fuzzer: Public API for image-fuzzer/runner/runner.py
image-fuzzer: Generator of fuzzed qcow2 images
image-fuzzer: Fuzzing functions for qcow2 images
image-fuzzer: Tool for fuzz tests execution
docs: Specification for the image fuzzer
ide: only constrain read/write requests to drive size, not other types
virtio-blk: Correct bug in support for flexible descriptor layout
libqos: Change free function called in malloc
libqos: Correct mask to align size to PAGE_SIZE in malloc-pc
libqtest: add QTEST_LOG for debugging qtest testcases
ide: Fix segfault when flushing a device that doesn't exist
qemu-options: add missing -drive discard option to cmdline help
parallels: 2TB+ parallels images support
parallels: split check for parallels format in parallels_open
parallels: replace tabs with spaces in block/parallels.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Rather than having the name as separate state. This prepares support
for creating a MemoryRegion dynamically (i.e. without
memory_region_init() and friends) and the MemoryRegion still getting
a usable name.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Despite being local to memory.c, use the helper function. This prepares
support for fully QOMifiying the name field of MR (which will remove
this state from MR completely).
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It doesn't change the MR and some prospective call sites will have
const MRs at hand.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the function provided rather than spying on the struct.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use the function provided rather than spying on the struct.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>